Runtime erorr in create infotype

HALLOW EXPERTS
I buield a infotype in 200 (dev) and I move the transport to 220 and I have runtime error like that
In the program "SAPFP50G", a CALL DIALOG statement is executed.
The name of the dialog module called is "RP_9122 ".
No dialog module exists with the name "RP_9122 ".
All dialog modules must be entered in table TDCT.
Possible reasons:
a) Wrong name specified. Pay particular attention to
upper/lower case and underscores ("_").
or
b) Transport error
b) Incorrect transport
what I doing wrong

Try running the Std Report RPUMS40CCI in your Client 220 for Infotype 9122.
~Suresh

Similar Messages

Error while creating infotype message no. pg293

Hi guys,
I am creating a new infotype after creating the PS structure when i click on generate objects i get an error saying "An internal error has occurred" message no. PG293.
kindly provide a solution.
points will be rewarded.
thanks

INFOTYPE CREATION WILL BE TAKEN CARE OF THE ABAPER AS RAO SAID
AS THE OUT PUT WILL HAVE TO SEEN IN ALL THE SERVERS THIS IS A LITTLE BIT TECHNICAL WORK
Start transaction PM01, Create Infotype, by entering the transaction code.
You access the Create Infotype screen:
2. In the Infotype no. field, enter the four-digit number of the infotype you want to create.
When you specify the infotype number, please remember to enter any leading zeros.
3. Choose IT characteristics.
This accesses the Display View Infotypes: Overview screen.
4. Choose Table view   Display   Change.
This accesses the Change View Infotypes: Overview screen.
5. Create a new entry for your infotype.
You can create new entries by
choosing Edit   New entries or
copying an infotype entry with similar characteristics.
If you want to copy an existing entry, select the entry you want to copy and choose
Edit   Copy as.
6. Check the entries in the individual fields.
Result: You have maintained the characteristics of your infotype.
Please check the above config for maintaining your infotype in PA30 and also check your entries in T582A & S.
Edited by: Sikindar on Mar 9, 2008 8:23 PM

Runtime Error when creating a new group

I'm getting a runtime error when creating a new group on a site collection?
Thanks in advance

The most possible reason is if your site collection is reached the maximum site quota limit,then there is chance to get the run time error while creating a new group.
In this case,you will get the error while creating/updating the group or while adding the new user/uploading any content.
Also Ensure the group name is not having any special/unsupported characters.
Feel free to share the error screenshot/entry in the ULS logs.
Please remember to click 'Mark as Answer' on the answer if it helps you
Best Regards,
Pavan Kumar Sapara
s p kumar

ABAP HR How to create infotype with table control in it like Infotype 0008

Hi Experts.
I need help from u guys. My client requirement is to create custom infotype just like 0008 infotype which contain table control to save amount and wage types. I try to create infotype with table control using PM01, but that table control is in display mode only, i almost search every where to create custom infotype with table control but what ever threads in forum all are they unanswered and most of the threads for creating infotype. But i already done with infotype , but my main problem is table control.
If any one have some suggestion for this please share with me.
<removed by moderator> i am looking for positive reply.
Edited by: Thomas Zloch on Aug 30, 2011 12:54 PM

Hi
I've created several infotypes with a Table Control and it is always the same story. You have to create a custom Z table to store the Table Control data (if you can have unlimited records), so in the PSXXXX structure you need to add a TABNR field to link the PAXXXX table and the Z one, just like the type table OM infotypes.
Then in your code you have to control every possible operation, INS, MOD, DEL... and update the Z table accordingly (the standard code won't do that)
If your TC fields appear in display mode, take a look at the Groups 1 and 3 in your fields, the must be set with the usual values for a PA infotype.
If you have more questions, just ask,
Regards

How to set authorization for only Create infotype record

How can I set the authorization so that the user can only create Infotype 14,15,2010,2001,2006 but cannot change and delete the record for these infotypes.
But user has the authorization to create,change and delete other infotypes.

Hi irene,
1. For this we have to use the
   authorisation object
P_ORGIN
2. It has got the following fields, on which authorisations can be controlled.
AUTHC     Authorization level
INFTY     Infotype
PERSA     Personnel Area
PERSG     Employee Group
PERSK     Employee Subgroup
SUBTY     Subtype
VDSK1     Organizational Key
regards,
amit m.

How to create infotype while creating another infotype

Hi All,
I have below requirement...
Whenever user create infotype 0008, infotype 0014 should be created for the wages available in a Z table.
I created a dynamic action and call function HR_INFOTYPE_OPERATION. When i debug the routine function successfully executed with sy-subrc eq 0. But when i check the database table, there will be no data for infotype 0014. I am writing the below piece of code, i put the hard code value for testing purpose...if you have any idea please let me know
IT_P0014-PERNR = '1000005'.
IT_P0014-ENDDA = '99991231'.
IT_P0014-BEGDA = '20071111'.
IT_P0014-LGART = '1003'.
IT_P0014-BETRG = 1003.
CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
EXPORTING
NUMBER = '1000005'
IMPORTING
RETURN = RETURN.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
INFTY = '0014'
NUMBER = '1000005'
VALIDITYEND = '99991231'
VALIDITYBEGIN = '20071111'
RECORD = IT_P0014
OPERATION = 'INS'
TCLAS = 'A'
IMPORTING
RETURN = RETURN
EXCEPTIONS
OTHERS = 0.
COMMIT WORK AND WAIT.
CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
EXPORTING
NUMBER = '1000005'.
Please let me know if i am missing any thing.

Use INSERT command instead of HR_INFOTYPE_OPERATION.It has some issues while calling from Dynamic Actions.

How to Create infotype views through pm01

I need to create a view for infotype 21. There is a tab for creating infotype views in pm01 transaction. but not sure how to use it. There are fields such as 'additional IT' and 'View'. Not sure what needs to be filled in these fields. I have created the structure for my view(PS0955). Can somebody help me out with this?

Well what I meant by view was to create a new infotype but it won't be maintained in standard way through pa30. It is basically a view (infotype with some subscreen) that will be called on existing infotype screen (in my case IT0021). So instead of modifying the standard infotype 21 screen I can append my desired fields to this through view.
Well my issue now has been resolved. But now I have yet another issue.
I want to create my own screen for existing infotype. For that I know that I have to copy the existing standard screen 2000 and rename it to some other number. However, i want to know what is the exact procedure. What are the other steps involved with it. Any body can help?

How to create infotype 1001

Hi experts,
I am doing some configuration in accouting and an error pops up indicating infotype 1001 is not maintained. As I know very little about HR module so I just try to create infotype 1001 in PA30 but turn out it can not be maintained there. Could any body tell me how to maintain this infotype.
Thanks,
Tony

Hi Tony,
You can go to PP01, select the otype, type in the objid and create 'Relationships' infotype which is infotype 1001.
Through transaction OOVK, you can find out what all relationships have to be created for an object. Some of these can be maintained through PP01, some cannot be (selecting the relationship subtype and then allowed relationships -> not maintainable flag).
Basically, you need to find out that for which relationship (subtype of infotype 1001) it is sayin that 1001 is not maintained. Then you can go and create only that relation in PP01.
Regards,
Neha

Idoc hrmd_a doesn't create infotype 0003 automatically

Hello !
When a new Person is created in One R3 system -
we send It's infotypes to another R3 system
with idoc hrmd_a.
We send only these infotypes :
0000,0001,0002,0006,0105,0041,0900.
We expect infotype 0003 to be created automatically in the new system ,
but it does not happen and for that reason
The Person is not created fully in the target system.
only 0000,0001,0002 are created and for each of the other infotypes we got a message like this :
"You have tried to create infotype XXXX for the following object: plan version 01, object type P, object ID 00XXXXXX. However, the object does not exist.
PA objects exist if infotypes 0000, 0001, 0002, and 0003 have been created. "
How can we make 0003 infotype to be created automatically
without sending it by the Idoc ?
Is there a flag in the idoc declarations or
a customization we can fill to make this happen ?
Thanks ,
Nitzan S.

Hi Nitzan,
I don't think there is any easy way to get 0003 infotype being created automatically on idoc input. At least I have none in Release 4.6 c.
Why not send it? IMHO there is no sensitive data in it? Besides there are ways to manipulate that data when replicated via ALE.
If you really need that infotype to be created, you could check EXIT_SAPLRHA0_003 of RHALE001 via transaction CMOD. There you can code your requirements in ALE-user-exit.
Regards
Herbert
Message was edited by: Herbert B.

Error when create Infotype 0007-Planned Working Time of Personnel data

Hi Experts,
I'm creating Infotype 0007-Planned Working Time for Personnel data then having a error below.( I created Work schedule rule and Gennerated it).
Feature structure cannot be recognized, please see documentation
Message no. P0568
Diagnosis
Cause 1:
The structure of the feature is not saved in the feature directory.
Cause 2:
The feature structure is not defined in the program that reads the feature.
Cause 3:
The feature that the program expects does not match the actual feature structure.
Procedure
Cause 1:
Please advise your system administrator that all features must be regenerated. Please note that this generation must take place in client 000 first, and then in all other clients (report RPUMKF00 or the Generation function in the feature maintenance transaction (transaction PE03)).
Cause 2:
The feature structure must always be defined in the program reading the feature (see documentation for program RPUMKC00).
Cause 3:
Please contact your system administrator
I did using T.Code PE03 in Client 000 but I don't know what is Features?
Please tell me how solves it ?
Thanks so much.
Dungnv

infotype 0007 reads two features
SCHKZ - Default value for Shift indicator
TMSTA DEFAULT VALUE FOR TIME MANAGEMENT STATUS
Please have a look at both these features

Creating infotypes with multiple subtype

Please tell me
How to create infotype with multiple subtype

Hi
Please check this like it has got step by step details
http://www.sapdevelopment.co.uk/hr/hr_infotypes2.htm
Regards,
Venkat

How can i add newly create infotype in t.code po13

Can any one pl tel me how can i view newly created infotype in t.code PO13
Edited by: Utkarsh M parikh on Mar 10, 2010 5:29 PM

See:
Mac OS X Automation,
Automated Workflow Tips,
Introduction to Automator tutorial, and
a four-parter on Automation in Snow Leopard by Sal Saghoian:
Snow Leopard Services,
Services for iPhoto,
Safari and WebKit integration, and
Installing and using services.
Finally,
Developing AppleScript Applications and
Apple's Automator Developer Documentation

Error while creating infotype 1764

Hi All,
When i am trying to give special booking authorization for a student to a module in student file, i am getting an error msg " error while creating infotype 1764". The same is working in EHP4 but not in EHP3.
Pls give your valuable inputs to resolve the issue.
Regards,
Sravan

Dear Sravan,
Check whether module in question is included in appraisal or not. If not then maintain it.
Hope it will solve your issue.
Regards
Vinod Kumar

Portal Runtime Error while creating new system in portal content

Hi
Can anyone solve my problem, i am geting error while creating new system in p ortal content
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.templateSelection
Component Name : com.sap.portal.admin.templateselectionwizard.default
com/sap/portal/iviewserver/cache/OClass.
Exception id: 11:29_26/12/06_0014_5891950
See the details for the exception ID in the log file

Hi,
Check this link for creating system object
http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N03_BB_InstallGuide_EN_US.doc
Regards
Arun

Portal runtime error while creating users in portal content administrator

I am getting this error while creating new users in portal.
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_admin_ws/com.sap.portal.user_management/com.sap.portal.createNewUser/com.sap.portal.createNewUser
Component Name : com.sap.portal.usermanagement.admin.CreateNewUser
com/sap/security/core/util/imp/Util.patternMatch(Ljava/lang/String;Ljava/lang/String;Z)Z.
Exception id: 03:51_27/08/08_0028_7431850
See the details for the exception ID in the log file
any help is appreciated...

log file look something like
this
2,5,PRT-Async]##0#0#Error#1#/System/Server#Java###Exception in PortalRequestManager.dispatchRequest without timeout
[EXCEPTION]
#1#java.lang.NoSuchMethodError: com/sap/security/core/util/imp/Util.patternMatch(Ljava/lang/String;Ljava/lang/String;Z)Z
     at com.sap.security.core.admin.util.checkEmail(util.java:110)
     at com.sap.security.core.admin.UserBean.checkFieldValidity(UserBean.java:695)
     at com.sap.security.core.admin.UserBean.checkUser(UserBean.java:591)
     at com.sap.security.core.admin.UserAdminLogic.performUserModify(UserAdminLogic.java:3226)
     at com.sap.security.core.admin.UserAdminLogic.executeRequest(UserAdminLogic.java:552)
     at com.sapportals.portal.prt.component.usermanagement.admin.UserAdminComponent.doContent(UserAdminComponent.java:71)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:377)
     at java.security.AccessController.doPrivileged(AccessController.java:241)
     at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:390)
     at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:164)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
     at java.lang.Thread.run(Thread.java:758)
#1.5#001125A6576A008C00000015000550E2000455943BAE9D63#1219995051656#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#Administrator#197794##irconepd_EPD_7431850#Administrator#f4d062d0759411ddb89b001125a6576a#Thread[PRT-Async 2,5,PRT-Async]##0#0#Error#1#/System/Server#Java###Exception ID:01:00_29/08/08_0043_7431850
[EXCEPTION]
#1#com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_admin_ws/com.sap.portal.user_management/com.sap.portal.userSearch/com.sap.portal.userSearch
Component class : com.sapportals.portal.prt.component.usermanagement.admin.UserAdminComponent
User : Administrator
     at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:969)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:377)
     at java.security.AccessController.doPrivileged(AccessController.java:241)
     at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:390)
     at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:164)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
     at java.lang.Thread.run(Thread.java:758)
Caused by: java.lang.NoSuchMethodError: com/sap/security/core/util/imp/Util.patternMatch(Ljava/lang/String;Ljava/lang/String;Z)Z
     at com.sap.security.core.admin.util.checkEmail(util.java:110)
     at com.sap.security.core.admin.UserBean.checkFieldValidity(UserBean.java:695)
     at com.sap.security.core.admin.UserBean.checkUser(UserBean.java:591)
     at com.sap.security.core.admin.UserAdminLogic.performUserModify(UserAdminLogic.java:3226)
     at com.sap.security.core.admin.UserAdminLogic.executeRequest(UserAdminLogic.java:552)
     at com.sapportals.portal.prt.component.usermanagement.admin.UserAdminComponent.doContent(UserAdminComponent.java:71)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     ... 7 more

Runtime erorr in create infotype

Similar Messages

Maybe you are looking for