Runtime error and mapping execution status

We have set maximum no of error parameter to = 50. When our mapping encounters an exception like Unable to extend space on some table space and at the time of encoutnering this exception no of error count is less than 50 - mapping returns success status. With the result that execution pipe continues with the next mapping. Though we would like to keep error count to 50 or higher value - so as not to interrupt the pipe if there is an insertion or updation failure but we would like the mapping to stop when space error or such an exception comes. Please let us know how can we achieve this.

Borkur,
I believe that if you look at the execution status in Workflow Monitor, you'll see that Workflow handles and reports status correctly within the top level flow and all subprocesses.
However, OWB Audit information for subflows is NOT registered as expected, the subflows always appear with status successful to me, even when mappings fail. I'm not sure whether it is a bug or that success actually means that the flow has concluded/finished (as opposed to status busy). I've had difficulty with OWB Workflow language before, as eg. the workflow AND operator has nothing to do with execution status logic, only with sequencing (ie. a wait-for-all-before-continuing-operator). The operator name and icon graphics are counter-intuitive to me.
Regards, Hans Henrik

Similar Messages

  • Mapping Execution Status

    Hi,
    When we I want to see the mapping execution status, I used to look into the WB_RT_AUDIT and get the mapping name, map run id, start time, end time and status. Here the status field gives the information as COMPLETE/SUCCESS. This is relating to 9.0.4. Recently, when I upgrade to OWB 10g the same view for the status it gives as 1 and even for error also it shows as 1, how to exactly know the mapping execution status is successful or not. Pls mention the table name and column name to know the status
    Kishan

    Ola Koshan,
    When you look at the audit table WB_RT_AUDIT and check the column RTA_STATUS you'll get a number. When you decode the number you will see wether the mapping is completed, running or ended in an error.
    This can be done like this:
    DECODE (rta_status, 0, 'Running', 1, 'Completed', 2, 'Error','Else')
    Please keep in mind that if you kill a mapping, the status will still be 'running'. This is because the process will not be able to update oracle's repository (because you killed it).
    There is quite a lot you can extract from the Audit tables. I do not quite know what you mean with mentioning the table and column name to know the status... As far is I understood you are looking for the mapping status... Right?
    Regards
    Moscowic

  • My iTunes program is giving me a message that says, "Runtime error" and wont open iTunes. How do I fix this?

    My iTunes program is giving me a message that says, "Runtime error" and wont open iTunes. How do I fix this?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Tried to install the most recent update and now my ITUNES won't load. Getting an error message that says there is a "runtime error" and that I need to reinstall INTUNES. Help!!!

    Tried to install the latest ITUNES update, but now it won't open my ITUNES at all. Saying I have a "Runtime error" and that I need to reinstall ITUNES. Tried a "repair" in Programs on my computer, but that didn't work either.

    Hello joeydak,
    We've an article that provides troubleshooting steps which can help get iTunes back up and running.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    Allen

  • Trying to install the new update and it kept saying runtime error and now my itunes has dissapeared from my computer.  All my music is gone!How do i get it back?

    trying to do the new update. it said runtime error``     and now my itunes is empty on my computer,  where/how do I get my music and playlists back?

    See Empty/corrupt library after upgrade/crash.
    tt2

  • Runtime error and unable to create new web application

    Hi
    when i create new web application i faced this error Runtime error and unable to create new web application.
    in this farm we have
    2 wfe servers
    2 application servers.
    adil

    Adil,
    There could be many reason like IIS issue, Space issue, Permission issue, SQL issue which is not possible us to guess rather
    you need to jump in the SharePoint log(Program Files\Common files\Microsoft Shared\Web Server Extensions\14\LOGS) and find out the specific error log its throwing after which trouble shoot can be start.
    You can refer few similar threads here -
    Link
    Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

  • While installing latest update I lost ability to open Itunes.  Getting "runtime error" and then next box says error 1114.  Tried uninstalling and reinstalling and does not work.  Getting same error.  Very frustrating.

    Cannot open Itunes after trying to install latest update.  Getting runtime error and then error 1114.  Tried uninstalling and reinstalling and still getting same error.  How do I fix this.  Very frustrating!

    Hi there,
    Earlier iTunes (and supporting applications) need to be completely uninstalled before you can install the new version. Here's the complete Apple info on this: http://support.apple.com/kb/HT1923
    Mobile device application will most likely fail to uninstall, so you would need to visit its location(s) and manually delete the files then folder(s). The location of the folders is documented in this link from Apple.
    It's a pain, but it should work.

  • TS3694 I'm running XP. After downloading the latest itunes update i get a "Runtime error" and can't start itunes. Help?

    I'm running XP. After downloading the latest itunes update i get a "Runtime error" and can't start itunes. Help?

    iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue
    Solving MSVCR80 issue and Windows iTunes install issues.
    Thanks to user turingtest2 for this solution.
    Solving MSVCR80 issue and Windows iTunes install issues.
    If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    You may be required to boot into safe mode to complete the folder deletion process.

  • The latest update has caused a runtime error and cannot use i tunes

    i have just tried to put the latest update on my laptop and it has caused a runtime error and now cannot install i tunes at all.

    have you use latest version of nvidia driver, you have a compatibility issue here. 

  • Runtime Error and Exceptions

    Hi,
    Could you please tell me "What is difference between  Runtime Error and Exceptions"
    Thanks & Regards,
    Krushna Biswal

    If you would like to handle and navigate based on the exception type, this code would help you. btw I'm not familiar with portlet though.
    http://sourceforge.net/projects/optionzero
    http://sourceforge.net/forum/forum.php?forum_id=666191
    You can declare exception type and navigation in faces-config.xml in declarative manner like Struts global exception notion.
    Please let me know it's useful or not.
    thanks,

  • Catching runtime errors and show message

    Hello:
    How do i catch runtimes errors and send a message back to the user to see?
    Imagine i violate a PK when writing to a database, what is the stabdard way to catch that and inform the user?
    Thanks.

    check out
    FacesContext -- addMessage()
    FacesMessages
    and the tags that dispay FacesMesssages
    <h:messages>
    <h:message>
    easy to catch an excpetion then add a FacesMessage to the context that will be displayed by the jsf message tags

  • Error in Mapping Execution

    Hi Experts,
       I am doing the dat file to RFC scenario.. development has been done.
       While testing i am facing the problem with mapping execution. I have tested with single record structure and multiple record structure.. but getting the same error.. pls see the below error.
    <!--  Request Message Mapping
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>Application</SAP:Category>
      <SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
      <SAP:P1>com/sap/xi/tf/_MM_DATA2RFC_</SAP:P1>
      <SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException:</SAP:P2>
      <SAP:P3>Fatal Error: com.sap.engine.lib.xml.parser.ParserE</SAP:P3>
      <SAP:P4>xception: Invalid char #0x0 (:main:, row:5, col:2~</SAP:P4>
      <SAP:AdditionalText />
      <SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_MM_DATA2RFC_; com.sap.aii.utilxi.misc.api.BaseRuntimeException:Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0x0 (:main:, row:5, col:2~</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    I have maintained FCC in configuration...
    can any one suggest what would be the problem.
    Thanks,
    Swetha

    Hi Stefen,
      You are absolutely right/correct.. i have saved file in another editor with ANSI.. and triggered the interface but now i am facing the problem with message mapping.. pls see the below error.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Request Message Mapping
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>Application</SAP:Category>
      <SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
      <SAP:P1>com/sap/xi/tf/_MM_EMFDATA2RFC_</SAP:P1>
      <SAP:P2>com.sap.aii.mappingtool.tf7.MessageMappingExceptio</SAP:P2>
      <SAP:P3>n: Runtime exception when processing target-field</SAP:P3>
      <SAP:P4>mapping /ns1:Z_H_EMF_RFC/IPFILE1/item[2]/TRMDA; r~</SAP:P4>
      <SAP:AdditionalText />
      <SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_MM_EMFDATA2RFC_; com.sap.aii.mappingtool.tf7.MessageMappingException: Runtime exception when processing target-fieldmapping /ns1:Z_H_EMF_RFC/IPFILE1/item[2]/TRMDA; r~</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    can you pls suggest abt the above error.
    Thanks,
    Swetha

  • Unexpected error during mapping execution

    Hello,
    we are implementing business intelligence for Siebel 8.1. Having one strange issue and hoping anybody could help us out.
    We are using OWB 10.2.0.1. Certain error appears during mapping execution LOAD_SR which basically loads service requests from Siebel DB to data warehouse.
    The mapping is using two tables as input (S_SRV_REQ and S_SRV_REQ_X) which are joined by S_SRV_REQ.ROW_ID = S_SRV_REQ_X.PAR_ROW_ID (+) using Joiner operator, because I always need extension table (S_SRV_REQ_X) rows either filled either containing only nulls (when there is no corresponding extension row). Sadly, this does not work, during execution it generates:
    Error:
    ORA-00997: illegal use of LONG datatype
    ORA-06512: at "DWH_ADM.LOAD_SR", line 32
    ORA-06512: at "DWH_ADM.LOAD_SR", line 3507
    ORA-06512: at "DWH_ADM.LOAD_SR", line 4553
    ORA-06512: at "DWH_ADM.LOAD_SR", line 9984
    ORA-06512: at line 1
    Warning:
    ORA-00997: illegal use of LONG datatype
    In summary, these join conditions generate same error as above:
    S_SRV_REQ.ROW_ID = S_SRV_REQ_X.PAR_ROW_ID (+)
    S_SRV_REQ.ROW_ID (+) = S_SRV_REQ_X.PAR_ROW_ID (+)
    S_SRV_REQ.ROW_ID = S_SRV_REQ_X.PAR_ROW_ID
    Strangely, when I use join condition S_SRV_REQ.ROW_ID (+) = S_SRV_REQ_X.PAR_ROW_ID, it works. But then right join is used and some records get rejected by joiner operation (those who do not have corresponding rows in extension table).
    Could someone help me with this issue?
    Any feedback would be greatly appreciated. Thank you for your time reading this!
    Edited by: user8872556 on Sep 28, 2011 2:21 AM
    Edited by: user8872556 on Sep 28, 2011 2:23 AM
    Edited by: user8872556 on Sep 28, 2011 2:23 AM

    We still were not able to solve this issue, would greatly appreciate any effort to help us out.

  • Seq File Post Step Runtime Error and Failure

    Hi,
    I am using  SequenceFilePostStepRuntimeError   &    SequenceFilePostStepFailure 
    in my seq file to handle  both. 
    the issue at hand is that,  once there is error the  execution runs to  runtime-error (SequenceFilePostStepRuntimeError) thats fine  then again i run my  Test-Step & error is generated  & it  again jumps to   runtime-error { Test-Step is a Pass/Failtest}
    but after that it jumps to SequenceFilePostStepFailure. I want to avoid this.    can I reset the flag which says that no PostStepFailure ?.
        In my Runtime-error step I also change the "Parameters.Step.Result.Status"  to display my custom  status .

    aparab wrote:
        In my Runtime-error step I also change the "Parameters.Step.Result.Status"  to display my custom  status .
    Do i understand this sentence correctly if a state:
    In your SequenceFilePostStepError callback, you change the status of the step calling into that callback because of a Runtime Error (Status: "Error") to the status "Failed"?
    If so, it is expected behavior, no, it even is "works as intended".
    You can use the TS API to disable the PostStepFailure callback, but you cannot enable this callback in the same step. So it would require an additional step for enabling the Failure-callback again which seems to makes things more complicated compared to NOT setting the step' result to "Failed"....
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • Portal Runtime Error - User Mapping

    Hi
    I installed EP6 SP9, KMC and TREX successfully. I logged into the portal and created a system to connect to R3 and also the system alias. When I tried to do the user mapping I get the following error:
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_mapping/com.sap.portal.userMappingAdmin/com.sap.portal.userMappingAdmin
    Component Name : com.sap.portal.usermanagement.admin.UserMappingAdmin
    User Mapping not fully available..
    Exception id: 12:06_31/03/05_0003_3886350
    See the details for the exception ID in the log file
    Please help.
    Sriram

    This was also discussed several days ago in this forum - please search the forum before posting.
    Did you install the strong encryption libraries? Without those libraries then usermapping cannot be stored securly in the DB and thus you see the error - by default ume.usermapping.unsecure is set to false, for VERY GOOD REASON. If you allow unsecure usermapping the the user/pwd data is stored in BASE64 strings in the DB - this is hardly secure.
    Only set ume.usermapping.unsecure to true in non-productive environments.
    Nick

Maybe you are looking for