Runtime error : Assignment to context failed (context overflow)

Hi experts,
     I am getting the following error..
   Runtime error : Assignment to context failed (context overflow). I also tried increasing maxctxtsize from 1677216 to 5242880 and also to 10485760 but no luck.
     Any help would be appreciated..
thanks,
rao

Hi Rao,
the default value for the maximum context size is 5242880 so if you increased a value from 1677216 I assume you picked the wrong value, the right one is programs/agate/MaxCtxtSize (make sure you change the right instance).
If this still not helps may be your response container is to small or the 10MB are still too small.
Please keep in mind that when you increase containers you take a lot of address space from the process since this container is created for each workthread and you may end up with a full address space (on 32 bit platforms). So when increasing the container sizes you may have to reduce the number of workthreads (and increase the number of processes to handle the same load as before).
HTH
Ralph

Similar Messages

SRM-MDM 3.0, assignment failed, runtime error

Hi all,
We are using SRM-MDM catalog 3.0, MDM-Client version are 7.1.01.78.
When building assignments which include lookup tables, the assignment failes giving the following runtime error:
"Assignment operation failed: A runtime error occurred while evaluating an validation or calculation field"
The assignment is initialising the item type with "Normal". If it is already filled, leave the old value.
Assignment Code Used: IF(IS_NULL(Item Type.[[Record]]), Item Type [[Normal]],Item Type.[[Record]])
The runtime error only occures when the Else-branche is processed.
This code above is also used in version 2.0 of the srm catalog, it is valid and working properly.
The code was re-entered in a, newly created, version 3.0 catalog-repository.

Error solved, we upgraded to version 3.0 Support pack 05 patch 2

6.0 Newbie default context failed to deploy error

 I'm using WLS 6.0 SP2 and my servlets stopped working. They were working, but
 now only the console will work. I get an Error 400--Bad Request
 "The request could not be understood by the server due to malformed syntax. The
 client SHOULD NOT repeat the request without modifications."
 The following corresponding error shows up:
 <Jun 20, 2001 12:40:05 PM CDT> <Error> <HTTP> <HttpServer(3277721,null default
 ctx,myserve
 r) found no context for "GET /HelloWorld.jsp HTTP/1.1". This should not happen
 unless the
 default context failed to deploy.>
 I've attached my config.xml. Any suggestions?
 [config.xml]


 "Conor" <[email protected]> wrote in message
 news:3b30ef88$[email protected]..
 >
 > I'm using WLS 6.0 SP2 and my servlets stopped working. They were working,
 but
 > now only the console will work. I get an Error 400--Bad Request
 > "The request could not be understood by the server due to malformed
 syntax. The
 > client SHOULD NOT repeat the request without modifications."
 >
 > The following corresponding error shows up:
 >
 > <Jun 20, 2001 12:40:05 PM CDT> <Error> <HTTP> <HttpServer(3277721,null
 default
 > ctx,myserve
 > r) found no context for "GET /HelloWorld.jsp HTTP/1.1". This should not
 happen
 > unless the
 > default context failed to deploy.>
 >
 > I've attached my config.xml. Any suggestions?
 Bounce the server, try to redeploy app watch the console for errors if you
 are doing a hot deploy or when the server comes back up. Post the errors to
 the NG if you still have trouble.

Portal Runtime error in assigning a role to a user by UME

Hi ALL,
I am assigning a role to a user through UME using this piece of code:
String uids = userFactory.getUserByUniqueName("Shilpa").getUniqueID();
String roleid = roleFact.getRoleByUniqueName("pcd:portal_content/administrator/content_admin/content_admin_role").getUniqueID();
roleFact.addUserToRole(uids,roleid);
The userid and role is beinf fetched successfully but at the assignment of the role to the user , I am gettign Portal runtime error.
The error log is following.
 java.lang.NoClassDefFoundError: com/sap/abc/network/util/InfEPLog
 at UserListeners.userAssigned(UserListeners.java:27)
 at com.sap.security.core.imp.RoleFactory.assignUserPerformed(RoleFactory.java:1466)
 at com.sap.security.core.persistence.imp.DistributedTransaction.doCacheUpdateAndNotificationForMembers(DistributedTransaction.java:565)
 at com.sap.security.core.persistence.imp.DistributedTransaction.doCacheUpdateAndNotificationForMembers(DistributedTransaction.java:815)
 at com.sap.security.core.persistence.imp.DistributedTransaction.doCacheUpdateAndNotification(DistributedTransaction.java:465)
 at com.sap.security.core.persistence.imp.DistributedTransaction.afterCompletion(DistributedTransaction.java:252)
 at com.sap.engine.services.ts.jta.impl.TransactionImpl.commit(TransactionImpl.java:414)
 at com.sap.engine.services.ts.jta.impl.TransactionManagerImpl.commit(TransactionManagerImpl.java:316)
 at com.sap.engine.services.ts.transaction.TxManager.commitLevel(TxManager.java:581)
 at com.sap.engine.services.ts.transaction.TxManagerImpl.commitLevel(TxManagerImpl.java:63)
 at com.sap.transaction.TxManager.commitLevel(TxManager.java:237)
 at com.sap.security.core.persistence.imp.DistributedTransaction.commit(DistributedTransaction.java:2742)
 at com.sap.security.core.imp.Role.commit(Role.java:337)
 at com.sap.security.core.imp.RoleFactory.addUserToRole(RoleFactory.java:1338)
 at com.sap.user.UserAdded.doContent(UserAdded.java:63)
 at com.sapportals.portal.prt.component.AbstractPortalComponent.doPreview(AbstractPortalComponent.java:240)
 at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:168)
 at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
 at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
 at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
 at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
 at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
 at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
 at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
 at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
 at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
 at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
 at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
 at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Please tell me where I am wrong.
Regards,
Shilpa.

Hi Shilpa,
The error "java.lang.NoClassDefFoundError" means that your classpath is not set correctly. This is likely due to a missing reference. The class file may be in the jar, but at runtime the component (your component) needs to have access to the jar file which contains the class.
Try adding the servlet.jar, activation.jar file in your project and also through your ADd external libraries at 'java build path'. also please ensure tht WAS and NWDS at the same SP level.
Hope this might help you.
Regards,
Shaila

RUNTIME ERROR IN GENERATED PROGRAM. Overflow converting ''

Hi,
While executing the below code i am getting the error
" RUNTIME ERROR IN GENERATED PROGRAM. Overflow converting ' ' am new to ABAP , can anyone kindly help me where i have went wrong ? .
IF ( V_DO_CDS_NAME_MAIN <> '' ).
 ABAP.
 DATA: ref_it_tab TYPE REF TO data,
 ref_wa TYPE REF TO data.
 FIELD-SYMBOLS: <fs_itab> TYPE ANY TABLE.
 FIELD-SYMBOLS: <fs_wa> TYPE ANY.
 FIELD-SYMBOLS: <fs_field> TYPE ANY.
 CREATE DATA ref_it_tab TYPE STANDARD TABLE OF (V_DO_CDS_NAME_MAIN) WITH NON-UNIQUE DEFAULT KEY.
 ASSIGN ref_it_tab->* TO <fs_itab>.
 SELECT * FROM (V_DO_CDS_NAME_MAIN) INTO TABLE <fs_itab> where C1 = V_WORK_ITEM_ID_MAIN.
 CREATE DATA ref_wa LIKE LINE OF <fs_itab>.
 ASSIGN ref_wa->* TO <fs_wa>.
 loop at <fs_itab> assigning <fs_wa>.
 assign component 'CLIENT' of structure <fs_wa> to <fs_field>.
 V_CLIENT = <fs_field>.
 assign component 'C0' of structure <fs_wa> to <fs_field>.
 V_C0 = <fs_field>.
 assign component 'C1' of structure <fs_wa> to <fs_field>.
 V_C1 = <fs_field>.
 assign component 'C2' of structure <fs_wa> to <fs_field>.
 V_C2 = <fs_field>.
 assign component 'C3' of structure <fs_wa> to <fs_field>.
 V_C3 = <fs_field>.
 assign component 'C4' of structure <fs_wa> to <fs_field>.
 V_C4 = <fs_field>.
 assign component 'C5' of structure <fs_wa> to <fs_field>.
 V_C5 = <fs_field>.
 assign component 'C6' of structure <fs_wa> to <fs_field>.
 V_C6 = <fs_field>.
 assign component 'C7' of structure <fs_wa> to <fs_field>.
 V_C7 = <fs_field>.
 assign component 'C8' of structure <fs_wa> to <fs_field>.
 V_C8 = <fs_field>.
 assign component 'MESSAGE_ID' of structure <fs_wa> to <fs_field>.
 V_MESSAGE_ID = <fs_field>.
 assign component 'TIMESTAMP' of structure <fs_wa> to <fs_field>.
 V_TIMESTAMP = <fs_field>.
 assign component 'EXTRACTKEY' of structure <fs_wa> to <fs_field>.
 V_EXTRACTKEY = <fs_field>.
 assign component 'STATEID' of structure <fs_wa> to <fs_field>.
 V_STATEID = <fs_field>.
 assign component 'DEVICE_ID' of structure <fs_wa> to <fs_field>.
 V_DEVICE_ID = <fs_field>.
 ENDLOOP.
 ENDABAP.
ENDIF.

Hi Mubeen,
While Copying the cotes have come closer otherwise its working fine , i was able to find the error .
There are ten predefined ABAP data types. There are 100 possible type combinations between these elementary data types. ABAP supports automatic type conversion and length adjustment for all of them except type D (date) and type T (time) fields which cannot be converted into each other.
I commented the TimeStamp part where i had given the ABAP Type as D and it started working .
But now i want to display the content of "TimeStamp" field but i am not able to do so .
This is the format in which it has to be displayed 2009.011.915.3353.
Which ABAPTYPE i need to use ?.
i am able to display in this format 20090119153353
regards
Harsha

"Truncation context failed to open for database" when executing Add-MailboxDatabaseCopy

On a new two-member DAG, I'm unable to successfully create mailbox database copies. When I issue the command:
Add-MailboxDatabaseCopy -Identity TFDAG1_DB1 -MailboxServer TFEX10MB2 -ActivationPreference 2
I get the following error in Powershell:
A server-side seed operation has failed. Error: An error occurred while performing the seed operation, which may indicate a problem with the source disk. Error: Failed to open a log truncation context to source TFEX10MB1. Hresult: 0xc7ff1004. Error: Error
returned from an ESE function call (-1305).
I do see event ID 222 from TruncationSource in the Microsoft\Exchange\HighAvailability\Operational log: "Truncation context failed to open for database 'eca57218-492d-49fc-a73d-88d919284477' from server 'TFEX10MB2' with reason: 'Database
is not replicated'."
The database copy is actually created, but it is initially in a suspended state, and won't become health until I either "Resume Database Copy" or "Update Database Copy".
Am I doing something wrong here? The documentation seems to inidcate that the Add-MailboxDatabaseCopy ought to be able to hanlde that step on it's own.
Thanks again!
- Jason

These are brand new MB servers in a test environment. We haven't gotten to the point where we are testing backup functionality, so there is no database backup activity going on. And, yes - circular logging is disabled.
I just removed one of the copies, and created another using the -SeedingPostponed option. This created a copy that immediately appeared as "Healthy" within the EMC. I tried Update-MailboxDatabaseCopy immediately after, but then got an error that
"Replication for database is not suspended", at which point the database copy showed in the EMC with a status of "Disconnected and Healthy".
So I removed that copy and went back to creating a new copy without the -SeedingPostponed option... At this point the database copy was created and immediately shows "Healthy" within the EMC. This is what I would have expected initially, so I'm
wondering if perhaps the Mailbox server was just too new when I was initially creating my first database copies (as in Exchange was installed and I then immediately created a DAG and backup copies less than 5 minutes after installation was complete).
Since it seems like it's working now, I may be out of the water? Will test some more tomorrow.
Thanks for the feedback and anything further you can provide.

Tear down of include component context failed due to an unhandled exception

My Application was developed with JDeveloper 11.1.1.3.0 . one of the page has a panel collection with simple table that fetch the data from a view object.
filter and sorting are enabled for all columns.
this page runs correctly on the integrated WLS server and on the standalone WLS of the same Fusion Middleware package on my pc.
I've then deployed the ear file on two different WLS server with the same version. the panel collection with the table did not displayed, and found the error below in log files.
Also after that error, the application does not accept any request, and I have to close the browser and start a new session.
Error Details from the log :
Module : oracle.adf.view.rich.component.fragment.UIXInclude
Message: Tear down of include component context failed due to an unhandled exception.
java.util.NoSuchElementException
at java.util.ArrayDeque.removeFirst(ArrayDeque.java:251)
at java.util.ArrayDeque.pop(ArrayDeque.java:480)
at oracle.adfinternal.view.faces.context.ApplicationContextManagerImpl.popContextChange(ApplicationContextManagerImpl.java:66)
at oracle.adf.view.rich.component.fragment.UIXInclude.tearDownVisitingContext(UIXInclude.java:206)
at oracle.adf.view.rich.component.fragment.UIXPageTemplate.tearDownVisitingContext(UIXPageTemplate.java:248)
at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.encodeEnd(ContextSwitchingComponent.java:157)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2567)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:432)
at oracle.adfinternal.view.faces.renderkit.rich.FormRenderer.encodeAll(FormRenderer.java:220)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1369)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:765)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:415)
at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2567)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:432)
at oracle.adfinternal.view.faces.renderkit.rich.DocumentRenderer.encodeAll(DocumentRenderer.java:1071)
at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1369)
at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:765)
at org.apache.myfaces.trinidad.component.UIXComponentBase.__encodeRecursive(UIXComponentBase.java:1515)
at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeAll(UIXComponentBase.java:785)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:942)
at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:271)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:202)
at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:710)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:273)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:205)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

Thank you Shah,
No, I did not do that , and I don't understand.
however, all other pages in the applications works fine, and forms and tables are displayed and working fine.
could you please explain more ?

Query Designer, Execute fails with missing iView (Portal Runtime Error)

Hi,
I have followed all steps to integrate Sap NetWeaver 2004s BI into EP. Checks done so far indicate that all is well between the EP and BI. From within the EP, I can execute the Bex Web Analyser iView and from there I can execute a query on the BI backend. From the BI backend, executing the function module RSWR_RFC_SERVICE_TEST returns the 'BI test service' success message. SSO is working fine as no user/passwords were prompted for. From the trace file, I can see no errors appear but I do see authentication success messages. So far, so good
But, when I execute a query from within the Query Designer, it calls the browser and then errors with the following error:
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
iView not found: pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex.
Exception id: 10:06_03/03/06_0012_26285450
See the details for the exception ID in the log file
Looking at the trace file, all it tells me is the same, that this iView is not found.
If I logon to the portal and have a look at the iViews within the 'platform-add-ons/bi' folder, I can see the following 4 iViews:
BEx Broadcaster (com.sap.ip.bi.bexbroadcaster)
BEx Portfolio (com.sap.ip.bi.bexportfolio)
BEx Web Analyser (com.sap.ip.bi.bexwebanalyzer)
My Portfolio (com.sap.ip.bi.myportfolio)
I cannot find the missing iView (com.sap.ip.bi.bex).
Any ideas/suggestions would be appreciated.
Thanks in advance.

Hi Ashish,
Thanks for the suggestions. Here is what happened:
1. I have run the deploy and change template again (BIPostInstall). Step 10 failed but I am not too concerned as it does appear that SSO is working both directions. Also, step 13 failed which is the 'Configure Repository Manager'. The error I got here was USER_AUTH_FAILED: User account for logonid "" not found. I am not sure where it is getting the blank userid from.
2. The 'com.sap.ip.bi.business_explorer_showcase' role suggestion looked very promising. I found some doco on it and it does mention this role and when assigned, then you see the Business Explorer tab. I assigned it to all users and to all groups. When I went back into the portal, sure enough, the Business Explorer tab was visible. From within there, I could run query which all worked fine.
BUT, when executing a query from within the BEx Query Designer, I still got the same error:
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
iView not found: pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex.
Exception id: 11:25_05/03/06_0003_26285450
See the details for the exception ID in the log file
Do you know if this is an actual iView that should exist in the portal content ? If you have this working, can you see this iView in the portal?
3. I had a look at this note (872043) but I could not get the sap download manager to work to get the zip files attached to the note download. If you have it still, could you email it to me ([email protected]) and I will try that. Did you apply the zip file?
I can't find any further trace information on why this missing iView error is happening. I've amended the severity level on the areas which a SAP note detailed but the only information I get is that a missing iView was called.
Function module RSWR_RFC_SERVICE_TEST still works fine and I can execute a query from the Web BEx Analyser iView.
I just can't execute a query from the BEx query designer due to the missing iView.
I don't know whether it is a communication problem even though SSO both directions seem to work OR whether I do have some content missing from my portal.
Regards

Should not happen unless default context failed to deploy

 Can somebody please throw some light on this error?
 <Mar 5, 2001 10:07:26 AM EST> <Error> <HTTP> <HttpServer5173817,null
 default ctx,POSDev01) found no context for "GET /classes/ringout_statelessSession3@/RingoutSessionBeanHomeImpl_WLStub.class
 HTTP/1.0". This should not happen unless the default context failed
 to deploy.>
 Myself and lot of other people in my team are getting this error
 when using beans in a cluster.
 I am getting this error consistently whenever I make some code
 changes in my bean class (not interface changes) and redeploy it
 and try to lookup through a stand-alone client.
 The only way I could find to overcome this problem is:
 1) edit config.xml to remove the Application element completely
 corresponding to the bean
 2) remove jar files from the applications directory
 3) re-deploy and run the client again.
 Thanks a lot
 Kiran Ganuthula


Partly it could be WLS problem also. Under any circumstances default webapp should be able
 to deploy. I have seen somebody else also reported the same problem. The current problem is
 if you delete anything from apps dir, the corresponding entry is not being deleted from config.xml
 So next time when you boot the server, it tries to deploy the webapp and eventually it fails.
 I 'm not sure if this is the situation in your case.
 In anycase somehow Targets tag is not being picking up. That's why i asked you add
 "WebServers" tag. I think we have done some major changes in SP1, to make sure that
 default webapp deploys all the times.
 If you still have problems, post it to servlet or management group, we will discuss there.
 Kumar
 Kiran G wrote:
 > I edited the config.xml ONLY after getting this error. And, it worked.
 >
 > BTW, can you please be more specific about the changes to config.xml
 > to solve the problem?
 > If possible, can you give pertinent portion(s) of config.xml, highlighting
 > the changes.
 >
 > Thanks
 > Kiran G
 >
 > Kumar Allamraju <[email protected]> wrote:
 > >
 > >
 > >It appears your "default webapp" failed to deploy.
 > >Did you messed up with the config.xml?.
 > >
 > >Add the following to your default webapp tag?
 > >
 > ><Application
 > > Deployed="true"
 > > Name="DefaultWebApp_vindev1"
 > > Path="./config/vindev1/applications"
 > > >
 > > <WebAppComponent
 > > Name="DefaultWebApp_vindev1"
 > > Targets="vindev1"
 > > WebServers="vindev1"
 > > URI="DefaultWebApp_vindev1"
 > > />
 > > </Application>
 > >
 > >
 > >Here vindev1 is my domain's name..
 > >
 > >BTW, this is not a clustering question. So you better
 > >post it to servlet newsgroup where you get much
 > >better answers..
 > >
 > >Kiran G wrote:
 > >
 > >> I forgot to give these details about the problem.
 > >> I am running this cluster using WebLogic 6.0 on a SUN
 > >sparc machine.
 > >>
 > >> The error text given in my original posting appears
 > >in the managed
 > >> weblogic server's log. The exception that the client
 > >receives while
 > >> lookup is :
 > >>
 > >> javax.naming.CommunicationException. Root exception
 > >is java.rmi.UnmarshalException:
 > >> failed to unmarshal class java.lang.Object; nested exception
 > >is:
 > >> java.lang.ClassNotFoundException: RingoutSessionBeanHomeImpl_WLStub
 > >> java.lang.ClassNotFoundException: RingoutSessionBeanHomeImpl_WLStub
 > >>
 > >> "Kiran G" <[email protected]> wrote:
 > >> >
 > >> >Can somebody please throw some light on this error?
 > >> >
 > >> ><Mar 5, 2001 10:07:26 AM EST> <Error> <HTTP> <HttpServer5173817,null
 > >> >default ctx,POSDev01) found no context for "GET /classes/ringout_statelessSession3@/RingoutSessionBeanHomeImpl_WLStub.class
 > >> >HTTP/1.0". This should not happen unless the default
 > >context
 > >> >failed
 > >> >to deploy.>
 > >> >
 > >> >Myself and lot of other people in my team are getting
 > >> >this error
 > >> >when using beans in a cluster.
 > >> >
 > >> >I am getting this error consistently whenever I make
 > >some
 > >> >code
 > >> >changes in my bean class (not interface changes) and
 > >redeploy
 > >> >it
 > >> >and try to lookup through a stand-alone client.
 > >> >
 > >> >The only way I could find to overcome this problem
 > >is:
 > >> >1) edit config.xml to remove the Application element
 > >completely
 > >> >corresponding to the bean
 > >> >2) remove jar files from the applications directory
 > >> >3) re-deploy and run the client again.
 > >> >
 > >> >Thanks a lot
 > >> >Kiran Ganuthula
 > >> >
 > >> >
 > >> >
 > >> >
 > >> >
 > >
 > >
 > ><!doctype html public "-//w3c//dtd html 4.0 transitional//en">
 > ><html>
 > >It appears your "default webapp" failed to deploy.
 > > Did you messed up with the config.xml?.
 > >Add the following to your default webapp tag?
 > ><Application
 > > Deployed="true"
 > > Name="DefaultWebApp_vindev1"
 > > Path="./config/vindev1/applications"
 > > >
 > > <WebAppComponent
 > > Name="DefaultWebApp_vindev1"
 > > Targets="vindev1"
 > > 
 > >WebServers="vindev1"
 > > URI="DefaultWebApp_vindev1"
 > > />
 > > </Application>
 > > 
 > >Here vindev1 is my domain's name..
 > > 
 > >BTW, this is not a clustering question. So you better
 > >post it to servlet
 > >newsgroup where you get much
 > > better answers..
 > >Kiran G wrote:
 > ><blockquote TYPE=CITE>I forgot to give these details about
 > >the problem.
 > > I am running this cluster using WebLogic 6.0 on a
 > >SUN sparc machine.
 > >The error text given in my original posting appears
 > >in the managed
 > > weblogic server's log. The exception that the client
 > >receives while
 > > lookup is :
 > >javax.naming.CommunicationException. Root exception
 > >is java.rmi.UnmarshalException:
 > > failed to unmarshal class java.lang.Object; nested
 > >exception is:
 > > java.lang.ClassNotFoundException:
 > >RingoutSessionBeanHomeImpl_WLStub
 > > java.lang.ClassNotFoundException: RingoutSessionBeanHomeImpl_WLStub
 > >"Kiran G" <[email protected]> wrote:
 > > >
 > > >Can somebody please throw some light on this error?
 > > >
 > > ><Mar 5, 2001 10:07:26 AM EST> <Error> <HTTP>
 > ><HttpServer5173817,null
 > > >default ctx,POSDev01) found no context for "GET /classes/ringout_statelessSession3@/RingoutSessionBeanHomeImpl_WLStub.class
 > > >HTTP/1.0". This should not happen unless the default
 > >context
 > > >failed
 > > >to deploy.>
 > > >
 > > >Myself and lot of other people in my team are getting
 > > >this error
 > > >when using beans in a cluster.
 > > >
 > > >I am getting this error consistently whenever I make
 > >some
 > > >code
 > > >changes in my bean class (not interface changes)
 > >and redeploy
 > > >it
 > > >and try to lookup through a stand-alone client.
 > > >
 > > >The only way I could find to overcome this problem
 > >is:
 > > >1) edit config.xml to remove the Application element
 > >completely
 > > >corresponding to the bean
 > > >2) remove jar files from the applications directory
 > > >3) re-deploy and run the client again.
 > > >
 > > >Thanks a lot
 > > >Kiran Ganuthula
 > > >
 > > >
 > > >
 > > >
 > > ></blockquote>
 > ></html>
 > >
 > >
 [att1.html]

[ERROR] javaType customization in this context must be nested (JAXB spec

Hi All,
when i was trying to generate java classes from schema xjc is giving the below error.
parsing a schema...
[ERROR] <javaType> customization in this context must be nested (JAXB spec
<property>
<baseType>
<javaType ...>
</baseType>
</property>
Failed to parse a schema.
my annotation goes like this for an attribute.
<xs:attribute name="content_id" type="xs:string">
<xs:annotation>
<xs:appinfo>
<jxb:javaType name="java.lang.Long"
prseMethod= "javax.xml.bind.DatatypeConverter.parseLong"
printMethod="javax.xml.bind.DatatypeConverter.printLong" />
</xs:appinfo>
</xs:annotation>
</xs:attribute>
please help me to resolve this problem
thanks in advance
Amar

Hi All,
when i was trying to generate java classes from schema xjc is giving the below error.
parsing a schema...
[ERROR] <javaType> customization in this context must be nested (JAXB spec
<property>
<baseType>
<javaType ...>
</baseType>
</property>
Failed to parse a schema.
my annotation goes like this for an attribute.
<xs:attribute name="content_id" type="xs:string">
<xs:annotation>
<xs:appinfo>
<jxb:javaType name="java.lang.Long"
prseMethod= "javax.xml.bind.DatatypeConverter.parseLong"
printMethod="javax.xml.bind.DatatypeConverter.printLong" />
</xs:appinfo>
</xs:annotation>
</xs:attribute>
please help me to resolve this problem
thanks in advance
Amar

Runtime error at maintain insp lot origins and assign inspection types

Hi all,
When i want to assign a new inspection type to lot origin 05 i get a runtime error. I don't know what's happening, but i think that it is caused because the system cannot find a record. When i look in TQ31 and TQ33 i see a line with lot origin 05. In table TQ32 there is no line.
I can still maintain all other inspection lot origins. I removed the inspection type from 05 and want to add another one, but it's not possible anymore because of the error...
Does anybody have an idea?

It sounds like you deleted the 05 insepction type that SAP delivers and had linked to origin 05
You shouldn't do that.
SAP is very picky about having the 01 variant assigned. You have deleted the 01 variant.
You can try to create it back maybe. If it fails, my guess is you'll have to have the basis team regenerate the TQ32 table from the 000 client. Then you'll have to redo any entries you need, like any custom inspection types.
FF

[SOLVED] libreoffice not starting context fails to supply singleton

Whenever I start libreoffice it shows this error:
The application cannot be started.
component context fails to supply singleton com.sun.star.deployment.ExtensionManager of type com.sun.star.deployment.XExtensionManager
in a window.
I found this old thread : https://bbs.archlinux.org/viewtopic.php?id=148053
But the latest clucene-2.3.3.4-8 is already installed, and btw I don't have any other language installed on the system:
pacman -Ss libreoffice | grep installed
extra/libcdr 0.1.1-2 [installed]
extra/libreoffice-fresh 4.4.3-1 [installed]
I replaced clucene with clucene-git (just to try) , but instead of the error the application keeps loading and nothing happens,
11801 0.0 0.0 200088 5476 tty1 Sl 14:56 0:00 /usr/lib/libreoffice/program/oosplash --writer
11818 0.2 0.4 876740 72548 tty1 Sl 14:56 0:00 /usr/lib/libreoffice/program/soffice.bin --writer --splash-pipe=5
11829 0.0 0.0 52216 4508 tty1 Sl 14:56 0:00 /usr/lib/libreoffice/program/oosplash --writer
11844 0.0 0.0 52216 4424 tty1 Sl 14:56 0:00 /usr/lib/libreoffice/program/oosplash --writer
It's weird not to find any threads on this which makes me think, am I the only one with this problem?
I'm on LXDE (maybe it's related?)
The system is full up to date.
Last edited by r0b0t (2015-05-28 11:08:10)

Ok, this was weird, so:
1) install the git package
2) reinstall clucene and clucene-git will be removed and will work ???
Will see if this works after the reboot

When running labview's test executive I recieve runtime error: Call to step "PRE-RUN" failed. Could someone explain this error?

I have a set of vi's that work when run under labview. However, when calling these vi's from labview's test executive I recieve runtime error: Call to step "PRE-RUN" failed. in Assign Connector Pane.vi->Call Test.vi->Execute Pre-Run.vi->Test Executive. Could someone explain this error to me? (or ideally tell me how to fix it?) Thanks.

Hello,
There are any number of possible causes to this problem. Which version of Test Executive are you using? Have you upgraded your Test Executive recently? The latest version is 5.1.1. If you have changed anything about Test Executive on your computer recently, I recommend you perform a mass compile of all your VI libraries, as having different versions of the VIs on your system could often result in the "Call to Step XYZ Failed" errors. Also, are you using any DAQ or Analysis VIs in your steps? We have seen problems where the use of DAQ or Analysis VIs in the sequence can cause intermittent "Call to Step...Failed" errors. There are some KnowledgeBase entries on our website that discuss this problem. Are you using the Test Executive in the VI environment, or
as an executable? Again, there are some problems with using Test Executive as an executable that result in these errors, and there are also KnowledgeBase entries that discuss these problems.
If you have a pared-down application that demonstrates the problem, feel free to send me your VIs and your .seq file and I will try to reproduce the problem.
Alternatively, I would suggest you visit www.ni.com/teststand to learn about TestStand, our state-of-the-art Test Sequencing software that completely outperforms Test Executive. It is very easy to use and much more powerful, and we have a top-notch support team available dedicated exclusively to supporting TestStand. As you are probably aware, we are no longer developing Test Executive, and instead are concentrating our efforts on making TestStand the penultimate solution for all our customers' test sequencing needs.
I appreciate your patience on this issue. Please let me know if I can offer further assistance.
Have a pleasant weeken
d.
Sincerely,
Darren Nattinger
Applications Engineer
National Instruments
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

An impersonation error occurred using the security context of the current user. -- Report server is on remote server and file share folder is on local server

I have deployed a report on the server (e.g. remoteserver\reports) from my local machine. I opened the report in browser in my local machine and created a new subscription with windows file share delivery option.
But its giving an error "Failure writing file \\localserver\subscriptions\Report1.xls : An impersonation error occurred using the security context of the current user." Here "subscriptions"
is the folder which I have created in my local machine.
I followed the instructions found in the link "http://msdn.microsoft.com/en-us/library/ms157386.aspx"
Please help to solve this issue.

Hi,
Thank you for your reply.
I have followed the same process. The credentials which I have given are same as my PC. But I am getting the same error. Can you please clarify the statement "Service
account that is using for file share subscription should have write access to shared folder."
given in the above link?
I am the one who created the folder and subscribing the report, so probably I have the full write permissions to the shared folder. What is the service account in this context?
I think the problem is, I am deploying the report on the server and creating the shared folder in the local machine. I tried giving shared folder permissions to the user on the server. But my local machine is in local domain and I cant access the users on
the remote server. Do I need to create a shared folder on the server? I am new to SSRS. Please help me.
PS: I have assigned with all roles viz. Browser, Content Manager, Publisher, Report Builder etc. and My Role name (WEBSERVER\User)
is different from my local user name (domain\username) in domain.

Crypt acquire context failed with 0x8009000f after upgrade from sms 2003 to SCCM 2007 SP1

I've upgraded clients from SMS 2003 SP3 to SCCM 2007 SP1.
In the SCCM console some ressources are showing as not being client.
If I look on the machine, I can see that client is installed but the client cannot communicate with the management point.
CCMEXEC.log shows the following error message :
Crypt acquire context failed with 0x8009000f.
Failed to create certificate 8009000f CcmExec 21/04/2009 9:49:10 1948 (0x079C)
CCMDoCertificateMaintenance() failed (0x8009000f).
So, the issue is related to certificate
If I go to C:\documents and settings\all users\Application Data\Microsoft\Crypto\RSA\MachineKeys and delete the file begining by 19c5cf... and then restart the client the problem is solved.
Can someone explain what is happening ?
What can I do to prevent this problem
Kind regards

In Server 2008 R2 SP1 (when Pushing Out SCCM 2012 clients)
I just added another account to the security (local Administrators) for the key which starts with 19c5cf...
and restarted the SMS AGENT HOST SERVICE.
Thats also resolved the problem. (NETWORK was the only security account on the key file).

Runtime error : Assignment to context failed (context overflow)

Similar Messages

Maybe you are looking for