"Truncation context failed to open for database" when executing Add-MailboxDatabaseCopy

On a new two-member DAG, I'm unable to successfully create mailbox database copies. When I issue the command:
Add-MailboxDatabaseCopy -Identity TFDAG1_DB1 -MailboxServer TFEX10MB2 -ActivationPreference 2
I get the following error in Powershell:
A server-side seed operation has failed. Error: An error occurred while performing the seed operation, which may indicate a problem with the source disk. Error: Failed to open a log truncation context to source TFEX10MB1. Hresult: 0xc7ff1004. Error: Error
returned from an ESE function call (-1305).
I do see event ID 222 from TruncationSource in the Microsoft\Exchange\HighAvailability\Operational log: "Truncation context failed to open for database 'eca57218-492d-49fc-a73d-88d919284477' from server 'TFEX10MB2' with reason: 'Database
is not replicated'."
The database copy is actually created, but it is initially in a suspended state, and won't become health until I either "Resume Database Copy" or "Update Database Copy".
Am I doing something wrong here? The documentation seems to inidcate that the Add-MailboxDatabaseCopy ought to be able to hanlde that step on it's own.
Thanks again!
- Jason

These are brand new MB servers in a test environment. We haven't gotten to the point where we are testing backup functionality, so there is no database backup activity going on. And, yes - circular logging is disabled.
I just removed one of the copies, and created another using the -SeedingPostponed option. This created a copy that immediately appeared as "Healthy" within the EMC. I tried Update-MailboxDatabaseCopy immediately after, but then got an error that
"Replication for database is not suspended", at which point the database copy showed in the EMC with a status of "Disconnected and Healthy".
So I removed that copy and went back to creating a new copy without the -SeedingPostponed option... At this point the database copy was created and immediately shows "Healthy" within the EMC. This is what I would have expected initially, so I'm
wondering if perhaps the Mailbox server was just too new when I was initially creating my first database copies (as in Exchange was installed and I then immediately created a DAG and backup copies less than 5 minutes after installation was complete).
Since it seems like it's working now, I may be out of the water? Will test some more tomorrow.
Thanks for the feedback and anything further you can provide.

Similar Messages

Error: Failed to open the connection when opening Crystal Report in CMC or

Hello all,
I am getting theError: Failed to open the connection when opening Crystal Report in CMC or Infoview
with access database as the datasource which is in the network drive.

Hi Sonali,
This is because Crystal Reports does not recognize database connection from share drive
1. Save the database locally on server machine
2. Create a new database on server and link the new database with the database on Network.
Steps to link the database.
1.Create a new test database on server.
2. Go to File --> Get External Data --> Link tables | Select the database on Network Drive.
3. Select all the tables from the database.
4. Save the Database e.g. Test.mdb.
5. Create an ODBC Connection on server machine, with the same name as on client machine using test.mdb database.
Note: Click on Advanced button, enter the default user id and password for the odbc connection, it is not mandatory to give Login Name and Password, only if the user id and password are given then we need to provide the same user id and password in the CMC database configuration.
6. Create a report using this ODBC connection, and save the report to Enterprise.
Regards,
Navin

Failed to open the connection, when view returns no data.

Hi Guys,
I'm having a minor issue.
I'm running a report in the crystalreportsviewer in asp.net.
The report is retrieving it's data from a view.
The report also has a subreport with an overview with totals, using the same view and the same parameters as the primary report.
Now everything is working fine in a filled database.
But when the view does not return any data, i get the following error:
Failed to open the connection. Failed to open the connection. Details:
[Database Vendor Code: 53 ] Failed to open the connection. Details:
[Database Vendor Code: 53 ] Failed to open the connection.
Freight_Charges_By_Branch_By_Period_By_Customer {9D0460D7-5C9E- 4FD5-B190-AFD41693A143}.rpt
Can anyone please help me with this problem.
Thanks in advance!
Regards William

Lot of important info missing here:
1) What version of CR?
2) What CR updates have you applied?
3) What version of .NET?
4) Is this on your dev box or after you deploy?
5) Have you looked up error code 53 for your database? (This is the error code CR engine is simply passing through from the db client)
6) What is the database?
7) What connection method are you using?
8) Depending on the version of CR, can you run this report in the CR designer?
9) Copy and paste the code used to run the report.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Error when executing add-on in client's computer

Dear All experts/gurus,
I need your help. I have problem when executing/open an add-on (installed in server and can be executed using server computer without creating ard file) I've created in my client's computers. although it is automatically installed but when execute, the error comes which message is "wrong digital signature". I create ard file for every clients that want to execute/use add-on and succeed. It is okay that I can create ard file for 1-3 computers but if it 10-20 computers, it is wasting time. how to solve this problem, where all computers in clients site can execute the add-on without must create ard file in every computers ?
I appreciate your answer. tks in advance.

Take a look at the "Package and Deployment" section in the SDK help file. This will guide you through how to install / launch your add-ons.
If you are using the standard SAP method documented there, you only need 1 ard file per release version of your add-on. You do not need to have a separate ard file on every client pc. The ard file includes in it a checksum (MD5) of your add-on executable. The ard file itself is only used during the "registration" process for an add-on. During registration, the checksum containined in the ard file and your add-on installer itself are both written to the Common database.
The error message "wrong digital signature" when the SAP add-on manager attempts to execute an add-on indicates that the executable version installed on that client does not match the one that was registered earlier. Most common causes are:-
a) You have manually copied a different executable onto the client pc
b) When creating the ard file, you selected a different add-on executable from the one you included in your installer.
When creating the ard file using the AddonRegDataGen program, make sure that you point the "Add-on EXE full path" to the version of the add-on executable that you are including in your installer. You will have to create a new ard file if you change the executable in the future, for example if you release a new version of your add-on.
John.

Logon account fails to open operationsmanagerDW database

Hya,
We have mainly 2 servers an RMS server and a RMSSQL database server.
Both servers are reporting the following error:Cannot open database "OperationsManagerDW" requested by the login. The login failed.Login
failed for user '<domain>\scomsql_svc'.
as you can see we are using windows authentication. I can login to the DB server using these credentials and expand the operationmanagerDW DB so that side ok.
in the scom console on the RMSSQL server the scomsql_svc account has been set as the service account for the DB but this hasnt changed since 2010 and should still work
The above error is caused by the Health services. How do i find out which server is trying to access the DB or weather both servers are having same issue.
I see that when you set up the RUNas account and profile you can set the scope of which servers the credentials will be pushed to(health services)-->Distribution
Security page, select the Less
secure or More
secure--does this have to be set at the moment more secure is selected with no servers listed. will this be by design or is it missing ie is there another way?

Can someone please help me here. on further expection these errors are coming from multiple servers: The account hasn't changed in AD and we can still login SQL management studio using this account?
event 26004
The Windows Event Log Provider is still unable to open the Appwatch event log on computer 'XXXX'. The Provider has been unable to open the Appwatch event log for xxxxxxx seconds.
Most recent error details: The specified channel could not be found. Check channel configuration.
event 31557
Failed to obtain synchronization process state information from Data Warehouse database. The operation will be retried.
Exception 'SqlException':cannot open database "operationsmanagerDW" requested by the login. the login gailed.
login failed for user <domain>\scomsql_svc.
event 31551
Failed to store data in the Data Warehouse. The operation will be retried.
Exception 'SqlException':cannot open database "operationsmanagerDW requested by the login. the login failed.
login failed for user <domain>\scomsql_svc

Whilst using FF20.0.1 and now with FF21 the new tab thumbnails fail to open for each new session. Why?

For a long time my chosen websites appeared as thumbnail images on the new tab page when I began a new session, maybe since about FF15, I don't recall for sure. Recently, however, whilst using FF20.0.1 this behaviour stopped and none of the thumbnail images for my selected websites opened up, although the links to them remained and this behaviour has continued to FF21, which I have been using since yesterday (19th May). This is not a serious issue, but I do like things to work properly and to understand why they don't. I don't know why there should be a relationship between the two events, but the problem began after having opened the new tab page and before the images opened up I clicked on one of the links - where the thumbnail image would normally be - to go to the website; thereafter FF failed to retain a memory of the thumbnail images from one session to the next. By the way, I never empty my history cache only my main web cache that has previously had no effect on my new tab thumbnails, not since about FF15 or so anyway.

Cor-el, hi.
When I opened FF about ten minutes ago I noticed that the new tab thumbnail image I had brought up from my previous session had been remembered, so I opened some of the other websites listed to bring back their images too; I then shut FF down, re-opened it and the new tab page to find all the images had been recalled. Next, I shut down the computer to determine whether or not the images were getting lost that way; on rebooting the computer and launching FF I again found the images were still there. Now I closed the new tab and emptied the main cache (43 MB); on opening the new tab the images were still opening (you will recall that when the new tab thumbnails first came out they disappeared on emptying the main cache). Bearing all this in mind I have not yet tried your suggestion of temporarily disabling the add-ons in safe mode because if the thumbnail images came up that would not currently tell me anything. Also, the problem I described in my first post does not remotely coincide with the installation of any add-ons, which have not been recent. Given then that my thumbnails are appearing after the cache has been cleared where does FF get them from now? I still don't understand this recent behaviour and why for the moment the problem is not occurring. Thanks again.

How to Load a data for database when format is different??

Hai all...
I have problem in Apex while loading the data to a database from external files..
Like i have my project input data in spreadsheet format..I wanted to load that in to Database..
But sequence and column names are different in spreadsheet and database tables.
My problem is like.....
In manual input format(spreadsheet) column names are employee names and while loading that to database i want to load that in a separate column named emp_name..
It looks as below
Manual data is like this:
WEEK ENDING DATE          Abc          Xyz          Pqr
15-Nov-08                    71.4          50          100
22-Nov-08                    76.9          100          100
i have database table like this
Column Name               Data Type
EMP_NAME               VARCHAR2(100)
WEEK_END_DATE          DATE
PERCENTAGE               NUMBER(2,0)
So I should be able to store like this
Emp_name          Week_end_date      Percentage
Abc               15-Nov-08               71.4
Xyz               15-Nov-08          50
Pqr               15-Nov-08               100
Abc               22-Nov-08               76.9
Xyz               22-Nov-08     100
pqr 22-Nov-08               100
But i am not able to get that..
Can any one suggest me how to do that in Apex..??
Should I use SQL loader for that???or do I have any option in Apex??or i should go for C program??
Thanks and Regards
Shan

Hello Shan,
You can access a CSV as an "External Table" (search on that). Then you can access the CSV as it was a 'normal' table and process data into your real tables.
Greetings,
Roel
http://roelhartman.blogspot.com/
You can reward this reply by marking it as either Helpful or Correct ;-)

Failed to open PDF file when placing a PDF in Indesign CS5

I am also having an issue when I am able to place the PDF that the bleed isn't showing up and the crops aren't either

The failure dialog usually means the import options are set to crop to one of the options that isn't defined for that particular file, and changing the crop options to one that isn't grayed out should work. To show bleed and marks, first they must be present in the PDF, and second your choice of crop option must be large enough to include them. Media would be my choice for that.

Reader fails to open mail attachment when filename contains non-us characters

Tested reader with 2 identical pdf attachments in email (same pdf, different filename). If filename contains, in this case, scandinavian characters like ä or ö (auml or ouml), reader flags error "The file path is not valid". This is a serious error, there is no other easy way to read to attachment on the road.
Tested with Nokia Lumia 800 with Adobe Reader version 10.1.1 Build 20120919.
BR, Martti

There seems to be an issue here that neither MS nor we were aware of. The WinPhone SDK that we are using has a flaw, and does not properly translate all of the international characters from the source app to our application. By the time we get the pathname from the OS it has been garbled. We are using a special SDK from MS that allows us to use our native C++ rendering engine on the device, and apparently that special SDK is where the problem lies.
We have a partial fix awaiting Microsoft Review Approval, but it is currently hung up because our app does not work on Windows Phone 8. The special SDK we had to use for our Windows Phone 7 app is not supported by Windows Phone 8, and we need to get the store approval team to grant an exception for our continued updates.
I say this all not to rationalize, but to at least communicate to you what the status is.
Dennis Griffin
Principal Product Manager
Adobe Reader for Tablets and Smartphones

Cannot synchronise as outlook fails to open for N8...

I updated PC suite to 6.83 from 6.82 and now cannot synchronise due to failure of outlook to open. I also updated device firmware to v.4.0707.0.7. Can a good summaritan kindly assist?

Hi,
Please re-create PC Sync settings. If this does not help, you should try to repair Outlook or re-create your Outlook profile.

Failed to open the connection - database vendor code 17

I'm upgrading a VB.net Windows Forms application from 1.1 to 4.0. In the reporting form, the list of reports you can choose are pulled from a folder where the .rpt files reside. Once the user chooses a report and executes it, vb code populates the current database connection information and displays the report in the report viewer control.
The following things are true:
- Version 1.1 works on my systems and my customers systems
- The code has not been changed, except that it now targets .Net 4.0 instead of 1.1
- The exact same .rpt files are being used
- Version 4.0 connects to the same database my customer is using, and I can run the reports just fine from here.
- Version 4.0 is able to connect to the database just fine from my customers systems (using the same connection information provided to the report)
- My customer installed this: http://downloads.businessobjects.com/akdlm/cr4vs2010/CRforVS_redist_install_32bit_13_0_2.zip
The only problem is that my customer encounters this error when trying to run any report from his systems:
Failed to open the connection.
Details: Database Vendor Code: 17
Failed to open the connection.
Orders.BOL.TaskDetail {393C9017-0ED1-4E1E-8824-E222F4B9D14C}.rpt
Details: Database Vendor Code: 17
I read all of the articles I could find, and they either don't describe this exact situation, or there is insufficient information for troubleshooting this issue. Are there steps that I've missed to make Crystal Reports for VS2010 work on my customer's systems?
Your help is appreciated,
Mark

Hi Mark,
More information required -
- Does this happen with all reports or few?
- What is the connection type used for the report to connect to the database (OLEDB,ODBC etc)
- Are you changing the database at runtime?
few things you could check
- Check if the database is accaessible from the client machine with proper permissions / rights.
- If its an ODBC connection check if the DSN with same name is created on the client machine.
- Check the driver / provided used by the report to connect to the DB, verify that the same is installed on the client machine. (SQL NAtive client, SQL Server etc)
Also take a look at below articles discussing the simillar issue.
[CR for VS2010: Failed to Open Connection [Database Vendor Code: 17 ]|CR for VS2010: Failed to Open Connection [Database Vendor Code: 17 ]]
[1474461 - Unknown Database Connector Error when connecting to a Dataset in a VS .NET application |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433373334333433363331%7D.do]
Hope this helps,
- Bhushan.

ORA-01460: unimplemented or unreasonable error & OPEN-FOR statement ...

Hi,
I have a procedure that opens a cursor which returns a result set based on a dynamic SELECT statement. The IN clause
in most cases needs to handle more than 1000 expressions. So to avoid the ORA-01785 error, I use a function to
convert the comma separated list of ids (which are unknown) into a collection which can then be used in the sub query
to process each expression or id. I assumed that the maximum string length I could use for these list of ids was
32767, i.e. VARCHAR2. But f I attempt to open the cursor with a list of ids where the string length is greater than 4000 bytes , the cursor is invalid
and it seems to throw the following Oracle error:
ORA-01460: unimplemented or unreasonable conversion ...
Note that anything less than 4000 bytes is fine. I have attached some of the code below and would appreciate if anyone
could tell me what im doing wrong! For example, can a varchar2 variable greater than 4000 bytes not be used when
executing dynamic SQL in the context of the OPEN-FOR statement?
-- Create type to hold collection of identifiers.
CREATE OR REPLACE TYPE IDList IS TABLE OF NUMBER;
-- Function which converts a string of comma separated list of identifiers
-- into a collection.
CREATE OR REPLACE FUNCTION fnConvertIDListToCollection(
     varList IN VARCHAR2,
     varDelimiter IN VARCHAR2 DEFAULT ',')
RETURN IDList
IS
     varString long := varList || varDelimiter;
     varPos pls_integer;
     varData IDList := IDList();
BEGIN
     LOOP
          varPos := instr(varString, varDelimiter);
          EXIT WHEN (nvl(varPos, 0) = 0);
          varData.extend;
          varData(varData.count) := trim(substr(varString, 1, varPos - 1));
          varString := substr(varString, varPos + 1);
     END LOOP;
     RETURN (varData);
END;
CREATE OR REPLACE PROCEDURE MyTestProc
myCursor OUT SYS_REFCURSOR
AS
varListOfIds VARCHAR2(32767);
BEGIN
     -- Hard coding this for now but this will be an incoming parameter containing a list
     -- of unknown ids, separated with commas.
     varListOfIds := '1,2 .. , 5000';
     OPEN myCursor FOR
     'SELECT     DISTINCT val1, val2, val3
     FROM TABLEA
     WHERE     val1 IN (select * from table(cast(fnConvertIDListToCollection(:ListOfIds) as IDList)))' USING varListOfIds;
END;
/

APC,
Many thanks for the suggestion and yes I could possibly implement an alternative solution, certainly for some cases but I need to investigate further for others. I'm migrating some SQL Server logic over to Oracle and that was simply the approach taken on that platform.
Could I trouble you with one further question as a newbie to all of this. I hinted in my last response that I was somewhat confused over the limits with the use of varchar2 variables in PL/SQL. If I were building up a piece of dynamic SQL (e.g. SELECT statement including a WHERE clause) using an incoming VARCHAR2 parameter for the WHERE clause, can this parameter contain more than 4000 bytes if necessary. I assumed it could be as big as 32767 bytes but an earlier response suggested a maximum of 4000 bytes. Really sorry for probably a fairly basic Oracle question but it would be very appreciated if you could explain this to me.
Again, many thanks.

DTW Fails to open at all

Hello,
I am using SAP Business one 2005 A Patch Level 29, I cannot get to even open DTW . It shows the icon on my task bar then crashes immediately.
It doesn't give ANY error message, or are they store elsewhere where I could check for them ??
What can I do to make it work ? What are the prerequisites for DTW ?

Dear ,
You need the same DI version as SAP B1.
To find out the DI version you need to check in in two places.
1. Right click on the file C:\Program Files\SAP Manage\SAP Business One
DI API\DI API 67\Object\SAPbobsCOM67.dll and go to properties, then
click on the version tab, and then in the list box find the entry
Special Build Description, this should have the same value as your B1
patch level. If it doesn't you should
uninstall the DI you have at the moment and then reinstall the DI that
is available on the latest patch.
2. The second dll you need to test is a dll that is downloaded from the
SBO-COMMON database when the add-ons connect to the server. This dll is
found in the following location
%temp%\SM_OBS_DLL\67XXXX\OBServerDLL.dll
when opening the above path note %temp% is an enviornment variable and
is unique per operating system. Also 67XXXX, there may be many of these
directories, what you need to do is select the highest one, which
represents the latest build.
When you eventually find the dll OBServerDLL.dll, Right click on it and
go to properties, then click on the version tab, and then in the list
box find the entry Special Build Description, this should have the same
value as you B1 patch level. If it doesn't what you need to do is to
delete the folder SM_OBS_DLL, this is a temporary folder so it is OK to
do this. Now restart the addon you are using (DTW, Fixed Assets e.t.c.),
fter it has initialised goto the %temp%\SM_OBS_DLL\67XXXX\ folder again
nd look at the Special build Description of the OBServerDLL.dll. If
gain it is bnot the same version then the SBO-COMMON database is not
he correct version, if this is the case please run the SBO Upgrader
tility available in the downloaded patch.
If the solution above can't solve your issue, you have reinstall DTW again.
Thanks
Apple

Fatal error 70: Cannot open calendar database

When I try to start my iPlanet Calendar Server(iCS) 5.0, the following error
occurs:

Fatal error 70: Cannot open calendar database
When this error occurs, first try to recover the database using the
"csdb" command line
utility. For more information on the
csdb utility, please
refer to the iCS 5.0 documentation at the following URL:

http://docs.iplanet.com/docs/manuals/calendar/ics50/ag/calagxa.htm#13586

If you are unable to recover the database using the
csdb utility, use the
following steps:
<OL>
<LI>Completely shut down the calendar server to ensure that there are no
stray calendar processes still running.

<LI>Change directory to your iCS database directory (the default directory
on Solaris is
/var/opt/SUNWics5/csdb/).

cd /var/opt/SUNWics5/csdb/

<LI>Create a temp
directory.

mkdir temp

<LI>Move all of the
*.share files to the
temp directory.

mv *.share temp/

<LI>Restart the calendar server.

Note: The *.share
files will be rebuilt upon startup.
</OL>


theFatal error 70: Cannot open calendar database error can occur after a migration from Netscape calendar server, using the ncs4migrate utility.
The problem can be that the log* files in the csdb folder (or wherever you put the calendar database) are not owned by the same user that runs the calendar server - commonly called icsuser.
ie.
-rw-r----- 1 root other 5499425 Jun 25 14:17 log.0000000142
will cause fatal error 70:
change the owner, thus
-rw-r----- 1 icsuser2 icsgroup2 5499425 Jun 25 14:17 log.0000000142
and it should work!
Regards,
- jd

"Unable to connect to the database" when connected to corporate network

Hi
Installed Primavera P6 V7 and Oracle 10g in Stand alone on XP 32bit machines with SP3. When our machines are NOT connected to the corporate network it works fine.
However when connected to the network we can not access the locally stored database. We get message "primavera unable to connect to the database. would you like to configure the database connection now"
Database on servers that we set up are fine regardless.
If we connect machines to just the internet, again no issues.
So something is stopping Primavera opening local database when connect on our corporate network.
Any ideas please?
Thanks

This may be a long shot but look into how your TNSNAMES.ora file is being distributed on the domain (or are you possibly utilizing LDAP.ora on the domain side?).
Some time ago I remember a company scripting an ENV variable on domain logon that altered where the Oracle client would pull the TNSNAMES from.

"Truncation context failed to open for database" when executing Add-MailboxDatabaseCopy

Similar Messages

Maybe you are looking for