Runtime error in a passed check formula

Hi all,
I have a formula passed the check in the formula editor, but in runtime I am  told  the following error:
Error in formula<myformula>
'if {MyDatatable.IsFrench}= 0 then'
a boolean is needed here.
IsFrench field is system.int32 type in dataset table. in runtime, this field will be flooded by data. Could you tell me in what phases this error occurs?
Thank you very mcuh!
Clara

Hi,
I've solved the problem. It is caused by the datatype mismatch between the dataset and stored procedure's result set. On the stored procedure side, if one field is defined as BIT then FALSE or TRUE value will be inserted into correspondend column in a datatable even though that column is defined as System.int32. So in design time, the crystal can not find any problem until runtime. Changing data type from  System.Int32 to System.boolean can solve the problem.
thank you for your attention
Clara

Similar Messages

  • Runtime Error while passing parameters in a BAPI

    Hi,
    I need to create a loan contract using BAPI_LOAN_CONTRACT_CREATE
    But it gives me this runtime error when im passing the values to it.
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
    not caught and
    therefore caused a runtime error.
    The reason for the exception is:
    The call to the function module "BAPI_LOAN_CONTRACT_CREATE" is incorrect:
    In the function module interface, you can specify only
    fields of a specific type and length under "CONDITIONHEADER".
    Although the currently specified field
    "I_CONDHEADER" is the correct type, its length is incorrect.
    Missing Handling of System Exception
    Program is:
    wa_loan-COMP_CODE = 'COPA'.
    WA_LOAN-STATUS = '60'.
    WA_LOAN-PROD_TYPE = '24A'.
    WA_LOAN-LOAN_TYPE = '302'.
    WA_LOAN-CURRENCY = 'USD'.
    WA_LOAN-CURRENCY_ISO = 'USD'.
    APPEND WA_LOAN TO I_LOAN.
    WA_CONDHEADER-CONDITION_VALID_FROM = '20120201'.
    *WA_CONDHEADER-VALID_FROM = '20120201'.
    WA_CONDHEADER-REPAYMENT_TYPE = '2'.
    WA_CONDHEADER-DISC_DET = '1'.
    WA_CONDHEADER-P_D_RATE = '100'.
    WA_CONDHEADER-COMM_CAP = '10000.0000'.
    WA_CONDHEADER-CURRENCY = 'USD'.
    *WA_CONDHEADER-CURRENCY_ISO = 'USD'.
    WA_CONDHEADER-TERM_START = 20120201.
    *WA_CONDHEADER-TERMS_START = '20120201'.
    WA_CONDHEADER-FINAL_DUE_DATE = 20120201.
    *WA_CONDHEADER-DUE_DATE = '20120201'.
    *WA_CONDHEADER-EFFINTFROM = 20120201.
    *WA_CONDHEADER-EFF_FROM = '20120201'.
    APPEND WA_CONDHEADER TO I_CONDHEADER.
    WA_PARTNERS-COMP_CODE = 'COPA'.
    WA_PARTNERS-PARTNER = '70027'.
    WA_PARTNERS-ROLE_TYPE = 'TR0100'.
    APPEND WA_PARTNERS TO I_PARTNERS.
    CALL FUNCTION 'BAPI_LOAN_CONTRACT_CREATE'
      EXPORTING
        LOAN                   = I_LOAN[]
        CONDITIONHEADER        = I_CONDHEADER[]
      CORRESPONDENCE         =
      USERFIELDS             =
      TESTRUN                = ' '
      REFRESH                = ' '
      PROCESSEXTENSION       = ' '
      STEERING               =
      AVOID_INNER_JOIN       = ' '
      CALLN_APPLN            = 'INT'
    IMPORTING
      LOANNUMBER             =
      ERROR                  =
      TABLES
        PARTNER                = I_PARTNERS
       CONDITIONS             =
      FORMULA                =
      OBJECTS                =
      COLLATERALS            =
      ENCUMBRANCES           =
      CLERKS                 =
      EXTENSION_IN           =
        RETURN                 = I_RETURN
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
      WAIT          =
    IMPORTING
      RETURN        =
    I am not able to understand where am I going worng.
    Kindly Help.
    Thanks.

    shruteie wrote:
    >
    APPEND WA_LOAN TO I_LOAN."why append?
    > APPEND WA_CONDHEADER TO I_CONDHEADER. "why append?
    > CALL FUNCTION 'BAPI_LOAN_CONTRACT_CREATE'
    >   EXPORTING
    >"LOAN type BAPILOAN_CREATE --> a structure
    >"CONDITIONHEADER type BAPICONDHEAD_CREATE --> a structure
    >     LOAN                   = I_LOAN[] "==> this is a table not a structure, why [] added?
    >                                     "keep WA_LOAN
    >     CONDITIONHEADER        = I_CONDHEADER[] "==> this is a table not a structure, why [] added?
    >                                             "keep WA_CONDHEADER
    > Thanks.

  • Portal runtime error while accessing BI Report as URL iView

    Hi All,
    I created an URL Iview with the URL of BI report, when i am trying to access it then getting portal runtime error.
    I had check the log it is showing the following details about the error, could you please help me out what is the root cause based on the log details...??
    Thanks in advance.
    Logfile Details
    1) 08:48_14/09/10_0049_139354050*
    *[EXCEPTION]*
    *com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template &#39;&lt;System.ConnectionString&gt;&#39;; the problem occured at position 0. Cannot process expression &lt;System.ConnectionString&gt; because Invalid System Attribute:*
    *System:    &amp;#39;SAP_LocalSystem&amp;#39;,*
    *Attribute: &amp;#39;ConnectionString&amp;#39;.*
    *at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:125)*
    *at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)*
    *at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)*
    *at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)*
    *at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)*
    *at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)*
    *at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)*
    *at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)*
    *at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)*
    *at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)*
    *at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)*
    *at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)*
    *at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)*
    *at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:235)*
    *at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:541)*
    *at java.security.AccessController.doPrivileged(AccessController.java:246)*
    *at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:430)*
    *at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)*
    *at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)*
    *at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)*
    *at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)*
    *at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)*
    *at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)*
    *at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)*
    *at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)*
    *at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)*
    *at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)*
    *at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)*
    *at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)*
    *at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)*
    *at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)*
    *at java.security.AccessController.doPrivileged(AccessController.java:219)*
    *at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)*
    *at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    2) Full Message Text*
    *Content pass of Application Integrator failed.*
    *Component Name:       'com.sap.portal.appintegrator.sap.Transaction',*
    *Context Name (iView): 'pcd:portal_content/net.ea.epson.BI_ROLES/com.epson.financeuser/ZB(3a)FINANCE_USER/com.Epson.UnitandGrossProfit',*
    *Top Layer:            'Transaction/DragAndRelateLayer',*
    *Producer ID (FPN):    'null',*
    *System Alias:         'BIDCLNT100',
    Thanks,
    Kalki Reddy.

    Hi Avadh,
    Thanks for your reply.
    I tested thru connection test of the system , it was tested successflly without any issues. all are into tick mark only.
    but when i am trying to use the system alias name while creating Trasaction iview also i am not able to get the system alias name in the dropdown for selecting the system alias.
    but system alias what ever it is "BIDCLNT100" is in active and connection test is done correctly without any issues.
    Please let me know the problem why i am not able to get the same system alias name "BIDCLNT100" not able to get in the drop down list while creating the transaction IView??
    Please reply , Thanks in advance
    Thanks,
    Kalki Reddy

  • Runtime Errors after login on ISA-shop

    Dear,
    I'm trying to put up ISA on a local server to test some things. I herefore copied the configuration of the server and adjusted the JCO-user to my user.
    After this I went to the starting page of my shop and tried to log in.
    The login will be checked, but after I login I get runtime errors.
    Now I checked the NWA and the first error that pops up is the following:
    Error occcurred in EAI layer "parameters: [client]='null' [user]='null' [language]='null' [ashost]='null' [systemnumber]='null' [mshost]='null' [gwhost]='null' [gwserv]='null' [group]='null' [systemid]='null'
    Properties: {lang=EN, passwd=?, sysnr=10, jco.client.mysapsso2=AjExMDAgABRwb3J0YWw6QWRtaW5pc3RyYXRvcogAE2Jhc2ljYXV0aGVudGljYXRpb2
    After this error, there still follow some more such as:
    Unable to retrieve shop data
    The shop could not be read from the backend; check your XCM settings.
    Also verify that the customer's sales area matches one of the shop's sales areas.
    Can this has something to do with the rights I have on the SAP-system with which I'm trying to connect as JCO-user? Or is there another reason?
    Thx for the help in advance.
    Kr,
    Maarten
    Edited by: Maarten Lenvain on Feb 18, 2009 10:15 AM

    Dear Mark,
    If I test the connection in the XCM it says that everything works fine.
    I also deployed the shopadmin locally and adjusted the XCM of this as well.
    If I go to the shopmanagement, I can't find the shops, because I get runtime errors.
    If I check the logs for this application, I notice that it are the same errors, saying:
    Unable to retrieve shop data com.sap.isa.maintenanceobject.backend.MaintenanceObjectHelperException: Unable to retrieve shop data
    No connection to backend system
    So, in the XCM he says the test work fine, but I ain't able to login properly.
    How can I check if I'm using SSO or UME?
    Kr,
    Maarten
    Edited by: Maarten Lenvain on Feb 18, 2009 11:42 AM

  • ABAP/4 runtime error SNAP_NO_NEW_ENTRY

    Hi All,
    I am unable to login in to my SAP server, after entering user id and password, the below ABAP Dump is displayed
    ABAP/4 runtime error SNAP_NO_NEW_ENTRY
    I have checked the SAP notes, but no luck
    Please advise
    SAPXPT

    Hello,
    SAP note 17537 describes the following :
    The error may be caused by the following:
    - Table SNAP is full,
    - short dump was not written due to database problems,
    - short dump has already been solved by reorganization.
    So check if the SNAP table is full or if there is a general database problem.
    Probably it is the last one, maybe a connection problem to the DB, archiver stuck, ...
    Can you still connect to the database with the command : R3trans -d
    Merry Christmas,
    Wim Van den Wyngaert

  • Migo runtime error

    i got a purchase order ,than i go to migo posting,
    enter apurchase order and plant
    press enterkey , select item Ok check box
    document is ok, but material item green symbol
    than post document ,error is runtime error
    this regards
    janaki

    Hi,
    Check the Dump details with your Basis/ABAP person.
    The will be able to identify the issue and help you to resolve
    Regards
    Merwyn

  • Portal Runtime Error while checking the Transaction in Portal

    Hi all,
    We r in the phase of setting the configuration of Portal. We did the the template installer but when iam checking the transactions in Portal ( System Administration--> Support--->SAP Apllication) , it is throwing me the following error.
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : N/A
    Component Name : N/A
    Missing Property 'ClassName' in property file for layer'Transaction/WinguiSSOLayer'..
    See the details for the exception ID in the log file
    Can anybody help me in this regard.
    Thank in Advance.

    Hi Niyati,
    I guess check through -->
    Under "Personalize > User Profile" the checkbox "Activate Accessibility Feature" must be unchecked!
    as, people earlier also faced this issue and SAP provided this solution.
    Also an alternative solution for this is like --
    Go to:
    <Drive>\usr\sap\<SID>\JC<Instance No.>\j2ee\cluster\server<Server No.>\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\portal\portalapps\com.sap.portal.appintegrator.sap\property\Transaction
    and see the content of the 'WebGuiSSOLayer.properties' file.
    One of the entries is ''ClassName'. The value on a 'valid' portal is: com.sapportals.portal.sapapplication.itsdetection.ITSDetectionLayer
    If it's not the case, then go to:
    <Drive>\usr\sap\<SID>\JC<Instance No.>\j2ee\cluster\server<Server No.>\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd
    rename the file 'com.sap.portal.appintegrator.sap.par.bak' to 'com.sap.portal.appintegrator.sap.par' open the par file and edit the file ''WebGuiSSOLayer.properties' (add the relevant entry for ClassName).
    Save the file (still with the par extension)
    Restart the portal (if everything is OK then the bak extension will be added to the filename).
    Just try this, hope it works.
    Reward points if helpful
    Regards,
    Shailesh Nagar
    Edited by: Shailesh Kumar Nagar on Jan 22, 2008 7:16 AM

  • Getting Runtime error when using HP Simple Pass

    Getting Runtime Error and Firefox shutdown when using HP Simple Pass on new HP dm 1165

    Try HP support. <br />
    http://h30434.www3.hp.com/t5/Operating-systems-and-software/HP-Simple-Pass-Not-working-in-Firefox/m-p/348876

  • Runtime Error-Description of Exception in Moni with Checked Flag

    Hi Floks,
    I am working on one interface ABAP proxy to File.While Executing the interface i am getting checked Flag in the Moni but when i double clicked on it.Its Displaying an error message.The error message is displaying like *Runtime Error-Description of Exception*
    *Under that the Short text is The Current application Triggered a termination with a Short Dump*.But I am getting the proper Out put.
    Please do needfull help on this.
    Regards,
    sai

    Hi,
    In error analysis iam getting this can u
    Error analysis
        Short text of error message:
        Control Framework : Error processing control
        Long text of error message:
         Diagnosis
             An error occurred when the system tried to process the comma
             from the Automation Queue on the presentation server.
             There are several possible reasons for this:
             - The installation of the SAP GUI on the presentation server
             faulty or obsolete.
             - There is an error in the application program
             - There is an error in the SAPGUI or an integrated control
         Procedure
             1. Make sure that you have imported the appropriate Support
             Package, the current kernel, and GUI patch for the release o
             system
             2. Check whether the error occurs locally on one or a few PC
             generally on all PCs. Note whether the error only occurs for
             users, for example because of a specific Customizing setting
             If it only occurs locally, this suggests an installation pro
             with the PC. Check the installation; if necessary, reinstall
             software. In the dump, search for the SY-MSGLI field, since
             point to the cause of the error.
             3. Activate the Automation Trace (in accordance with SAP Not
             158985).
             4.Start the transaction and continue until the screen immedi
             before the dump.
             5. From the System -> Utilities menu, choose Autom. Queue,
                      Synchronous Processing.
             The status bar of the GUI displays the text:
                "Automation synchron flush mode on"
             6. If you now proceed with the application, the short dump will
             display the ABAP call that caused the error; the Automation Trace
             will contain the error on the presentation server.
             7. If necessary, load the short dump and trace files on to
             sapservX, so that SAP can analyze them.
        Technical information about the message:
        Message class....... "CNDP"
        Number.............. 006
        Variable 1.......... " "
        Variable 2.......... " "
        Variable 3.......... " "
        Variable 4.......... " "
    this message i am getting so can u plazzzzz

  • SAP E-Commerce for mySAP ERP. Runtime Error on order check-out.

    Hi,
    Currently I'm running a webshop on ERP commerce (isa). And an error occurs on order check-out when you actually try to create your order online. I've checked my XCM settings several time and configurations are default and active.
    In the ECC back-end this process al goes wel with a user and transaction code va01.
    (Date formats from the users are consistent).
    Any help would be very welcome!? I've seen more trhreads but never a suitable answer for my issue.
    Kr,
    Jelmer Oenema
    The error looks like follows when doing a log and trace:
    Full Message Text
    A runtime exception occurred on the highest level
    [EXCEPTION]
    java.lang.NullPointerException
    at com.sap.isa.backend.r3.salesdocument.rfc.ReadStrategyR3.setLatestDateFromItemExtensionToAttribute(ReadStrategyR3.java:2601)
    at com.sap.isa.backend.r3.salesdocument.rfc.CreateStrategyR3.simulateDocument(CreateStrategyR3.java:359)
    at com.sap.isa.backend.r3.salesdocument.OrderR3.simulateInBackend(OrderR3.java:500)
    at com.sap.isa.businessobject.order.Order.simulate(Order.java:251)
    at com.sap.isa.isacore.action.b2c.order.MaintainBasketB2CBaseAction.createOrder(MaintainBasketB2CBaseAction.java:568)
    at com.sap.isa.isacore.action.b2c.order.MaintainBasketB2COrderAction.basketPerform(MaintainBasketB2COrderAction.java:66)
    at com.sap.isa.isacore.action.b2c.order.MaintainBasketB2CBaseAction.isaPerform(MaintainBasketB2CBaseAction.java:180)
    at com.sap.isa.isacore.action.IsaCoreBaseAction.ecomPerform(IsaCoreBaseAction.java:343)
    at com.sap.isa.isacore.action.EComBaseAction.doPerform(EComBaseAction.java:353)
    at com.sap.isa.core.BaseAction.execute(BaseAction.java:211)
    at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
    at com.sap.isa.core.RequestProcessor.processActionPerform(RequestProcessor.java:674)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
    at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
    at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
    at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
    at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
    at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
    at com.sap.isa.core.RequestProcessor.processForwardConfig(RequestProcessor.java:267)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
    at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
    at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
    at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:427)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:358)
    at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
    at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
    at com.sap.isa.core.RequestProcessor.processForwardConfig(RequestProcessor.java:267)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
    at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
    at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
    at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:427)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:358)
    at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
    at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
    at com.sap.isa.core.RequestProcessor.processForwardConfig(RequestProcessor.java:267)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
    at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
    at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
    at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
    at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
    at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
    at com.sap.isa.core.RequestProcessor.processForwardConfig(RequestProcessor.java:267)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
    at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
    at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
    at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
    at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
    at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
    at com.sap.isa.core.RequestProcessor.processForwardConfig(RequestProcessor.java:267)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
    at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
    at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
    at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
    at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
    at com.tealeaf.capture.LiteFilter.doFilter(Unknown Source)
    at com.sap.isa.isacore.TealeafFilter.doFilter(TealeafFilter.java:61)
    at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:174)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)

    Hello Jelmer,
    Waht release ans SP of ECO are you running and what ERP backend ? . If you create a session log do you get any further information?
    Have you checked note [1040092|http://service.sap.com/notes/1040092] this looks like the solution to your issue, bue dependent on your release.
    regards
    Mark

  • CREATE_OBJECT_CLASS_NOT_FOUND runtime error during extractor checking

    Hi Gurus,
    I had to modify a generic data source based on a database view. I had to add a field for extraction. Since this field was available in the tables on which the view was built but not used in the view, I modified the view to to include the field. Then, I modified the extract structure to include the newly added field.
    Now, when I try to check the extractor in RSA3 (extract checker), I end up getting a runtime error with details as below.
    Runtime Errors                    CREATE_OBJECT_CLASS_NOT_FOUND          
    Except.                    CX_SY_CREATE_OBJECT_ERROR          
    Date and Time                    3/6/2012     5:46:07     
         Short text                         
              CREATE OBJECT: The class "\CLASS=ZCL_IM_CLC" was not found.                    
         What happened?                         
              Error in the ABAP Application Program                    
              The current ABAP program "CL_EXIT_MASTER================CP" had to be                    
               terminated because it has                    
              come across a statement that unfortunately cannot be executed.                    
         Error analysis                         
              An exception occurred that is explained in detail below.                    
              The exception, which is assigned to class 'CX_SY_CREATE_OBJECT_ERROR', was not                    
               caught in                    
              procedure "INSTANTIATE_IMP_CLASS" "(METHOD)", nor was it propagated by a                    
               RAISING clause.                    
              Since the caller of the procedure could not have anticipated that the                    
              exception would occur, the current program is terminated.                    
              The reason for the exception is:                    
              The dynamically specified class "\CLASS=ZCL_IM_CLC" at CREATE OBJECT neither                    
               exists as                    
              local, nor as global class in the system, or is overshadowed by a local                    
              data type of the same name.                    
         Missing RAISING Clause in Interface                         
              Program                    CL_EXIT_MASTER================CP
              Include                    CL_EXIT_MASTER================CM002
              Row                    1
              Module type                    (METHOD)
              Module Name                    INSTANTIATE_IMP_CLASS
         Trigger Location of Exception                         
              Program                    CL_EXIT_MASTER================CP
              Include                    CL_EXIT_MASTER================CM002
              Row                    15
              Module type                    (METHOD)
              Module Name                    INSTANTIATE_IMP_CLASS
         Source Code Extract                         
         Line          SourceCde               
         1          METHOD instantiate_imp_class .               
         2                         
         3            DATA: abs_type_classname TYPE string,               
         4                  imp_obj            TYPE imp_obj_type.               
         5                         
         6          *   Look for objects that have been created for this class               
         7            READ TABLE imp_obj_tab INTO imp_obj               
         8                WITH TABLE KEY imp_name    = imp_name               
         9                               calling_obj = caller.               
         10            IF sy-subrc = 0.               
         11              instance = imp_obj-obj.               
         12            ELSE.               
         13              CONCATENATE '\CLASS=' imp_class INTO abs_type_classname.               
         14          *****  dynamic object creation     *******************************               
         >>>>>              CREATE OBJECT instance TYPE (abs_type_classname).               
         16          ******************************************************************               
         17              imp_obj-imp_name    = imp_name.               
         18              imp_obj-calling_obj = caller.               
         19              imp_obj-obj         = instance.               
         20              INSERT imp_obj INTO TABLE imp_obj_tab.               
         21            ENDIF.               
         22          ENDMETHOD.     
    Can anybody please help me solve this issue?

    Hi Ajay,
    Please check the following threads for your issue::
    System Exception
    Exception              CX_SY_CREATE_OBJECT_ERROR
    Why is CREATE_OBJECT_CLASS_NOT_FOUND ?
    Dump CREATE_OBJECT_CLASS_NOT_FOUND with BADI in MM_MATBEL archiving object
    Regards,
    Arpit

  • I went to check the american legion letter for this month i get a runtime error ????

    i have been getting my email pok ,but this month ,aug.2014 i check with the legion and went to send my name in and email address.incase it was lost ,but i get this sever '/' application then runtime error ,i dont know why

    Does this also happen with the current Firefox 31 release?
    You can try these steps in case of issues with web pages:
    You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Acrobat PDFMaker Office COM Addin for Microsoft Office 365 does not work. When I check the cox for COM Add-ins, it unchecks it. "A runtime error occurred during the loading of the COM Add-in." I use Adobe X Professional. The Add-in worked fine in Office 2

    I recently upgraded to Microsoft 365 Home and use Outlook 2013. The Acrobat PDFMaker Addin worked fine in Office 2010. Now, I get an error message: Not loaded. A runtime error occurred during the loading of the COM Add-in.
    I use Adobe Acrobat X Professional.
    I have restarted Outlook, restarted my computer, and nothing changes.
    Does anyone have a solution?
    Steve

    I do not think that AA X is compatible with the newest versions of OFFICE and such. Your only choice is to print to the Adobe PDF printer or use the MS plugins to create PDFs.

  • Runtime error trying to 'check for updates'

    currently using itunes 7.2.0.35 ... trying to upgrade to 7.3
    here's the entire error:
    microsoft visual c++ runtime library
    runtime error!
    program: c:\program files\itunes\itunes.exe
    this application has requested the runtime to terminate in an unusual way. please contact the application's support team for more information
    ..

    I've been having too many crashes with Safari anyway so it needed to go. It's a shame, I like it. I'll give Apple more time to work out the bugs. I've submitted a few problems myself so I've done my part Errors pulling up some secure Web sites, locking up when playing certain videos (even from the apple site), some random crashes, etc... I'll try Safari again later.

  • Runtime error in LSMW to create Material Master

    Hi all,
    I am trying to create Material No. using direct input method in lsmw. The program name is RMDATIND. But while executing the last step i.e Start Direct input program I am getting a runtime error
    "A RAISE statement in the program "SAPLMG25" raised the exception
    condition "NOT_FOUND".
    Since the exception was not intercepted by a superior
    program, processing was terminated."
    I have checked all the steps of lsmw. Any idea why this specific error is coming?

    Are you able to create the material manually with the data. If you have checked the basic data view then i would check to see if base unit of measure is mandatory and if its being passed/mapped properly for the material you are creating.

Maybe you are looking for

  • Pair the remote with Macbook

    I can't pair the remote with my Macbook (which was purchased 3 days ago) and its driving me CRAZY! HELP

  • Screen display density variations between files

    I have several files linked together as a book. For some reason the density of lineweight and fonts in one of the files "appears" lighter than the others on my monitor. With the other (7) files the lines and fonts definitely "look" heavier... I've ch

  • Show us what's in your 'connection.php' file. Delete any credentials or other sensitive info.

    hellow, Here's the code of connection Tell me what is wrong please Have a nice day Rahel <?php  // Connection au serveur // Connection au serveur try {   $dns = 'mysql:host=localhost;  dbname=test';   $utilisateur = 'root';   $motDePasse = '';   // O

  • Help CFSELECT

    Hi, I am trying to use flash forms to create a drop box(CFSELECT) but I haven't used this before and I am running into problems. I am attaching my code for help. My syntax is probably the problem as I am used to SELECT instead. I will appreciate help

  • Illustrator CC 2014 Links Panel Displaying Incorrectly

    Hi, I am having trouble with the Links panel in Illustrator CC 2014. The panel does not display correctly, it seems to hide all of the link information and preview unless I enlarge the panel to a huge size. Even if I resize the window it still displa