Runtime error on Windows Mobile 6.1 after install

I have a Windows Mobile 6.1 Classic device (non-phone),
CE OS 5.2.21041 (Build 21041.1.6.0)
Processor is an ARM1136 MX31
Memory: 115.09Mb
I installed the 3.0 SDK, and copied and installed the CAB file on the device per the instructions on the website.
When I click on the "Sun Java CLDC Emu" icon, I get the following error message:
"The file 'sun_jwc' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file"
I tried removing and reinstalling - same error. Everything seemed to go ok with the CAB installation.
Any suggestions as to what to check/test?
Regards,

Hello,
we don't sign the java runtime cab nor the executables inside it. So to be able to run it on a device, the device needs to have security lowered at least to the level at which the user is asked for permission when he is installing / running an unsigned cab / executable. In the context of Windows Mobile security, it means that the device's security configuration needs to be set to "Two-Tier-Prompt", "One-Tier-Prompt" or "Security-Off" (see http://msdn.microsoft.com/en-us/library/ms839681.aspx for more details).
Changing of the security configuration might require device manufacturer's or operator's assistance.
In some cases it can be done by the user. Some of them are listed below:
1) the user has a registry editor application which can run on the device and can change the device registry (such application needs to be signed by a certificate which is trusted by the device)
2) the device has installed Microsoft Windows Mobile development certificates
3) the device allows the user to install the Microsoft Windows Mobile development certificates
Of these the 2 and 3 is more likely, so If it's your case, try the following:
1) Install Windows Mobile SDK (http://www.microsoft.com/DownLoads/details.aspx?familyid=06111A3A-A651-4745-88EF-3D48091A390B&displaylang=en)
2) Install "<WM SDK>/Tools/Security/SDK Development Certificates/Certs.cab" on the device
3) Go to "<WM SDK>/Tools/PocketPC/Security/Security Configuration" and use one of the cpf file to change the device's security configuration (see <WM SDK>/Tools/PocketPC/Security/Security Configuration/ReadMe.txt)
Regards,
Java ME SDK team

Similar Messages

How can I fix the Runtime Error R6034 so that I can correctly install iTunes on my PC ? I get a notice that states ' An application has made an attempt to load the C runtime library incorrectly - Please contact the application's support team for more info

How can I fix the Runtime Error R6034 so that I can correctly install iTunes on my PC ? I get a notice that states ' An application has made an attempt to load the C runtime library incorrectly - Please contact the application's support team for more info

Hey Debbiered1,
Follow the steps in this link to resolve the issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
When you uninstall, the items you uninstall and the order in which you do so are particularly important:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Take care,
Delgadoh

HT5628 After running bootcamp, DVD drive is detected by Windows 8. But after installing drivers, no longer can detect. Device Manager shows that DVD drive is unplugged! Drivers in Bootcamp "removed" the DVD drive!

After running bootcamp, DVD drive is detected by Windows 8. But after installing drivers, no longer can detect. Device Manager shows that DVD drive is unplugged! Drivers in Bootcamp “removed” the DVD drive. I think there is an issue because I reinstalled Windows 8. If I don't install driver, then I have reduced functionality (no Apple keyboard, no sound etc), but once I install driver, I lose my DVD drive.

Hi, guys, I have had the exact same problem since the summer of 2010. Here's what I was able to find out.
Deleting upper/lower filters, running all those Fix Ya programs and other Microsoft crap is useless. This problem is most certainly has nothing to do with registry of any software on your computer. I took my HP 9620us to a couple of repair places and, they tried a lot of things and it appears that the root of this problem is a faulty motherboard connection. Of course, it costs about 400 bucks to fix it so I'm not sure I want to pay this kind of money.
Anyway, if somebody was able to fix it PLEASE post here to let us know. Again I am 99 per cent sure it's some piece of hardware in the motherboard.

Getting error 16 in CC2014 Photoshop even after installing and re-installing mac maverick latest update 10.9.5

Getting error 16 in CC2014 Photoshop even after installing and re-installing mac maverick latest update 10.9.5

Check if this helps. http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html
~ Arpit

CS5 Runtime Error in Windows 7

Hey everyone,
I tried searching for this problem but couldn't find a good answer, so i joined in hopes someone could help me.
I have Windows 7 Premium, and I've been using Photoshop CS5 for a while now with now problems. Now when I start it up, i get an error message after the splash screen that says: "An unexpected and unrecoverable problem has occured. Photoshop will now exit."
Then another message that says:
"Runtime Error!
Program: C:\... (cut off)
THis Application has requested the Runtime to terminate in an unusual way. Please contact the application's support team for more information".
Then it closes. The only thing i've done recently was update my bios. To try and fix the problem, I updated directx, deleted my prefs, downloaded the new c++ redistribuable, uninstalled/reinstalled photoshop twice and still nothing.
Please help me out or point me in the right direction. Thanks!!!
-JB

Be sure to download the Audition 3.01 update patch from http://www.adobe.com/support/downloads/detail.jsp?ftpID=4237
Is there any obvious pattern to this crash? Does it occur while performing any specific edit or operation? I know you mentioned it was random, but have you seen it crash while sitting idle, or does it only happen in multitrack?

POL 3012 device write error on windows mobile 6 and lite 10.2.0.1

Hi all,
This was an issue even some times ago and still appearing on and off for some clients and I did not find any recovery process which could be done remotely via the web to go admin.
1. When the device write error occurs we cannot initiate sync or any other from client or server and it just gives pol 3012.
2. If this happens to a client in far away area , how can we re configure the device from remotely (still device management is up and running).
3. If there is any mechanism to do a complete database refresh and re-create at client device from the admin functions in web to go device management.
4. Even the complete refresh sync has no use when this occurs and If we can delete and recreate the odb files only on the device it will be very convinient.
5. Currently only way i can see is just to uninstall the client and do a complete installation with deleting the odb files that arfe in the storage card.
Any help on this is highly appreciated.
Thanks
Paninie.

greetings:P
well in our client it doesnt work to "and then asked the user to ..." users usually dont know how to use the handheld , some times they are very old and we never ask the users to do something like deleting the files manually because that normally causes them to start complaining and say stuff like "your app sucks etc etc":(:(
my proposal is much simplier and will work i think for your purpose. you simply create a small c sharp application. you asked
"How to create it to stop DMAgent."
well thats very simple in c sharp and in most languages i think,
OpenNETCF.Diagnostics.Process is the namespace you need to work with, you simply kill the process with name dmagent.exe. this is the simplest way to close the dmagent in 5-6lines of code.(use the OpenNETCF.Diagnostics.Process class, from the OpenNETCF
library, which you can download from http://www.opennetcf.org)
then you use the normal file.delete to delete the files of the database, and then you want to do the sync, that can be easilly done through c sharp as you already do i guess.
the cab file i mentioned is simply the way to distribute the small c sharp app to all clients. it can be created with simply cab files generators which are freeware or through visual studio.
you can distribute the small app to all clients simply through the packaging wizard. so when a user has a problem you dont need to "ask the user to .." you just tell him ok, leave the the handheld alone for 15 minutes and it will get fixxed by itself, you send the command i described in my previous reply and the handheld's small app fixxes the problem. the user doesnt need to get involved. the cab file is sent to all clients (actually it is downloaded through oracle lite) . of course you dont wait for the problem to happen and then send the cab file. all users will have the cab file's small application preinstalled . it will be on the mobile device waiting for the command. so even if in some point this error occurs you can handle it. you dont wait for a user to call and say i have a problem and then send the cab file.
btw if you want to distribute your cab file you open the packaging wizard, edit your application..go in the file selection tab and select your cab file. the next time all users sync they will be asked to install the cab file. this is how we install our cab files, and this is how we install our application upgraded versions, we do not copy the cab files in a flash disk or send them with email or stuff like that. all application cab files are distributed through oracle lite remotely when ( i love olite for this, in other systems like mobilink you need to buy a second program to do that or else send your cab files through email.... ) .
code for stopping dmagent should look like about this
using OpenNETCF.ToolHelp;
ProcessEntry[] processes= ProcessEntry.GetProcesses();
foreach(ProcessEntry pe in processes){
if(pe.ExeFile.Equals("dmagent.exe")){
pe.Kill();
break;
stopping the dmagent is like stopping any other running process on the windows mobile.
so you have 5-6 lines of code for stopping the dmagent+1-2 lines for the file.delete (for the database files)+1 line for the c sharp olite synchronization . your app shouldnt be more than 10 lines of code i think.
we have used this cab file tactic which was proposed from an oracle lite representative actually after our request for creating a server side initiated synchronization which syncs a specific set ot tables with push only. we wanted the guy on the office to have a small java app which will have a button that sends a specific command on the handheld that forces it without the user concent to sync some specific tables with push only , the normal synchronize databases command can not do this job, so we created our own small c sharp app, which is distributed as a second cab file (the first is the main app) and the users now in the office have a small java util where they select the user and then send the command (using the java apis). so this second cab file+command tactic can help in solving a lot of problems. give it a try.

Runtime error while saving the billing document after creation

hi friends ,
while saving the billing document after creation , the fallowing discriptive runtime error has come.
Run time errors -
SAPSQL_INVALID_TABLENAME
Except. -
CX_SY_DYNAMIC_OSQL_SEMANTICS

Dear Unnam,
There may be several reasons...
1. If u have enhanced the tcode with some z tables,and that might not be moved properly to prod or not active in data dictonary.
2. u may not be entering proper data to the input fields.
3. please check if u have added any z tables to the std tcode.I am exepcting this prob.u may not moved the table or enhancement properly to prod server,
Please check it...
Thanks N Regards
SettyKY

Runtime error with windows 7

Hi,
I have a new laptop with Windows 7 and Adobe reader 10 'X' installed. I am unable to open a PDF dopcument. A box shows up titled Microsoft visual C++ Runtime library and within the box is written 'Runtime Error Program :C... This application has requested the Runtime to terminate in an unusual way.Please contact the applications support team for more information'. I have tried to follow instruction on support for adobe but cannot find the information they are suggesting i change such as preferences etc. Can anybody help me as I do not have a good knowledge of computers and nobody to ask....

Try the following and check if you could launch reader or not?
1. Right click on Reader icon and choose Properties...
2. Goto Compatibility tab and check 'Run this program in compatibility mode for'
3. Click OK
4. Double click on Reader icon and choose 'Open with protected mode disabled' and click OK.

Has anyone encountered a Microsoft Visual C++ Runtime error in Windows 2000 when upgrading from Labview 6.0i to 6.0.2?

When I try to upgrade Labview 6.0i to 6.0.2 by running the setup.exe file I downloaded from the NI site, I immediately get a dialog box with the header "Microsoft Visual C++ Runtime Library" and it says "Runtime Error! Program: C:\setup.exe abnormal program termination."
I'm running Windows 2000, but I've successfully installed it on another computer with the same setup. I'm guess some of the DLL files in system32 has been corrupted or mismatched versions. But I don't know which one...
Anyone know what this means?

Hello,
You can probably solve this problem by going to Start >> Run and typing the following:
Regsvr32 \msi.dll
Where is the folder where the msi.dll file resides on your computer (you can use Start >> Find to find the exact location). Once you do this, the installation of the 6.0.2 update should work properly.
Please let me know if you continue to have any problems. Thanks for your patience on this issue, and have a pleasant day.
Sincerely,
Darren Nattinger
Applications Engineer
National Instruments
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Installing agent - "VBScript runtime error" on Windows server

Hi all,
I am installing the agent (10.2.0.2.0) on another one of my Windows Oracle servers - this is about the 10th one I've done, and I am doing it no differently than all the others.
I download the wget.exe utility, put it in the path somewhere (usually put it under e:\oracle\ora92\bin), then download the agentDownload.vbs script from the Grid server. Then, when I issue the command to start the installation:
cscript agentDownload.vbs b e:\oracle m ourserver.ourdomain.com r 4889
and I am getting this error (2 different lines):
e:\oracle
agentDownload.vbs(476, 2) Microsoft VBScript runtime error: Object doesn't support this property or method: 'currentdirectory'
Has anyone ever seen anything like this?
Thanks,
Brad

Whats your defualt directory?
can you try by putting wget in the beggining of windows path variable.

Flash Lite 2.1 error on Windows Mobile

Haven't been able to find much info on this error when using Flash Lite 2.1 in either IE Mobile or Opera Mobile:
"flash lite 2.1 for windows mobile 5 will support flash 7 content authored for mobile devices only"
I'm using CS5 and publishing the SWF as Flash Lite 2.1 with Action Script 2.0. When I run it through the Device Central emulator I get this output:
Flash version of "lite2_player.swf" is Flash Lite 2.x
Dimensions of "lite2_player.swf" are 240 x 200 px
Is there something else I need to do to make sure the swf is "authored for mobile devices"?

Alessandro,
Yes, I see now another Flash Lite 2.1 player installed not
under media but under menu. Starting it allows me to browse my
Flash Lite 2.1 files and they display fine.
Next up, I must try to get Flash Lite 3, but developer
applications for Flash Lite 3
have closed afaik. Does anybody know where/when/if/how a
Symbian edition Flash Lite 3 player can be got to test on a Flash
Lite 2.1 player phone?
thanks again!
Colm

Windows server 2012 R2 DC (Hyper-V Guest OS) DNS error event id 4013 in log after installing KB2975719 and/or KB2995388

Hi,
I just freshly installed a guest OS Windows 2012R2 on a Hyper-V 2012R2 server. Installed lots of updates and did many reboots, after that I installed the AD component. Couple of days later I'm having trouble with a RemoteDesktop server joining the domain.
After some research I see in the DNS log the following message:
Type: Warning
User: N/A
Computer: Fileserver.domain.com
Source: DNS
Catagory: None
Event ID: 4013
The description for Event ID ( 4013 ) in Source ( DNS ) cannot be found. Either the component that raises this event is not installed on your local computer, or the installation is corrupted. You can install or repair the component on the local computer,
or contact the component manufacturer for a newer version.
If the event was saved from another computer or forwarded from a remote computer, you might have to include display information with the events when saving them or when setting up the forwarding s .
This message is followed up with:
Type: Information
User: N/A
Computer: Fileserver.domain.com
Catagory: None
Event ID: 4
The description for Event ID ( 4 ) in Source ( DNS ) cannot be found. Either the component that raises this event is not installed on your local computer, or the installation is corrupted. You can install or repair the component on the local computer,
or contact the component manufacturer for a newer version.
If the event was saved from another computer or forwarded from a remote computer, you might have to include display information with the events when saving them or when setting up the forwarding s .
Type: Information
User: N/A
Computer: Fileserver.domain.com
Catagory: None
Event ID: 2
The description for Event ID ( 2 ) in Source ( DNS ) cannot be found. Either the component that raises this event is not installed on your local computer, or the installation is corrupted. You can install or repair the component on the local computer, or
contact the component manufacturer for a newer version.
If the event was saved from another computer or forwarded from a remote computer, you might have to include display information with the events when saving them or when setting up the forwarding s .
I did a restore from an earlier point, recreated the ActiveDirectory, but messages still coming in DNS log. I started from scratch with installing a new guest OS Windows 2012R2, directly after loging in first time, I installed AD component, and
give the server a reboot. and got the events below that looks normal:
Type: Warning
User: N/A
Computer: Fileserver.domain.com
Catagory: None
Event ID: 4013
The DNS server is waiting for Active Directory Domain Services (AD DS) to signal that the initial synchronization of the directory has been completed. The DNS server service cannot start until the initial synchronization is complete because critical DNS
data might not yet be replicated onto this domain controller. If events in the AD DS event log indicate that there is a problem with DNS name resolution, consider adding the IP address of another DNS server for this domain to the DNS server list in the Internet
Protocol properties of this computer. This event will be logged every two minutes until AD DS has signaled that the initial synchronization has successfully completed.
For more information, see Help and Support Center at
Type: Information
User: N/A
Computer: Fileserver.domain.com
Catagory: None
Event ID: 2
The DNS server has started.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Type: Information
User: N/A
Computer: Fileserver.domain.com
Catagory: None
Event ID: 4
The DNS server has finished the background loading and signing of zones. All zones are now available for DNS updates and zone transfers, as allowed by their individual zone configuration.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
After that I create snapshots after installing every (10-15 updates), reboot, check dns log, and almost the last update, the KB2975719 and/or
KB2995388 is giving the weird messages in the DNS log.
http://www.microsoft.com/en-US/download/details.aspx?id=44051
Any idea?
Kind regards,
Steven

Hi Steven,
Would you please tell us that is the event 4013 logged continuously?
If this event is only logged after reboot or restart DNS service, then it is a normal behavior.
As we can see Event 4, which indicates that the DNS zones have been loaded successfully.
In addition, if Event IDs 4523 and 4524 are being logged after the Event 4013, then there is no problem with DNS service.
More information for you:
Event ID 4013 — DNS Server Active Directory Integration
http://technet.microsoft.com/en-us/library/cc735842(v=WS.10).aspx
Event ID 4 — DNS Server Service Status
http://technet.microsoft.com/en-us/library/dd349715(v=WS.10).aspx
Best Regards,
Amy

Windows 7 wont boot after install of boot camp drivers

I have been trying to get boot camp on imac mid 2010 with Maverick. TodayI used
Boot Camp Support Software 5.1.5621
The first set of drivers
Boot Camp Support Software 5.0.5033
kept crashing on windows. Today I noticed a new set of drivers, well its the same issue. If I leave off the boot camp drivers windows is fine, except no sound and other driver missing issues but it works. The problem seems to be Mav or the drivers, before updating to Mav everything was fine. Sometimes I can even get to the windows log on screen, at one point I was able to log on and do things. So being smart, I restarted and the problem came back. Who says Macs dont have issues.
Any thoughts

Just ran into this same issue.
My problem got resolved after using the x64 version DVD of Win7 (just x64 instead of the DVD that had both x86 and x64 versions).
What I did:
My host is Windows 8.1
After installing Windows 7 x64 as VM on my 8.1 based laptop two days ago, I wanted to do the same on my desktop PC, but I had the same issue described here.
I used a DVD just with the x64 version for my laptop and a DVD with both x86 and x64 version for my desktop.
Tried repairing as advised by a post, but got the error: "This version of System Recovery Options is not compatible
with the version of Windows you are trying to repair. Try using a recovery disc that is compatible with this version of windows."
I exported and imported the VM from my laptop to my desktop to test it and it ran with no problems.
So I tried the DVD that had just the x64 version of Win7 and that installed without issues.
I'm curious if this happens only when a DVD with more than one Win7 versions is used.

T440 - DWM service is crashing in windows 7 64 bit after installing drivers for USB Replicator

Dear All,
Good day!,
This will be my first post to the community and looking forward for an expert advise on the issue am facing with Lenovo ThinkPad USB Port Replicator with Digital Video drivers in Enterprise 64bit running on T440, following are the details:
Environment:
Windows 7 Enterprise 64bit installed on T440 where all drivers are up to date for all devices though (System Update 5) tool.
Requirement: Usage of Lenovo ThinkPad USB Port Replicator with Digital Video (M01060) which will be connected to .
Steps followed:
Connected to the port replicator before installing the device driver.
Download and installed device driver from the link: http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-73088
3. Issue: After installing the device driver above, system reboots and after logging back using the local admin account or any other windows account (DWM service) crashes along with any other software installed (Ms. Office, Lync, IE9, ...ext). Tried uninstalling the driver, rebooted and Windows runs smoothly again back with no errors.
4. Questions:
T440 hardware compatible with Lenovo ThinkPad USB Port Replicator with Digital Video ?
Which USB version Lenovo ThinkPad USB Port Replicator with Digital Video has ? (2.0 or 3.0) ? did I missed some special drivers for USB ?
Any other links for the above driver can be found for Win 7 Enterprise 64bit ?
For 3 days, am searching the web for a similar issue, found and followed all troubleshooting steps mentioned by others but none of them helped. I will really appreciate your support if any expert can advise. Thanks in advanced

I have the same problem with my T400 updated to Win 7 pro. Not happy.

Keep getting error message: Windows installer is not correctly installed

Hello all..
After trying to install some software or getting the thinkvantage update I keep getting this error message.
"The Windows Installer service could not be accessed. This can occur if you are running in safe mode, or if the Windows Installer is not correctly installed. Contact your support personnel for assistance."
So I've restarted and made sure I was in normal mode. Didn't help. Does anyone have any idea before I put this thing into the shop?? LOL
Thanks!
T60.. 2 years old this month!!

Hello and welcome here.
Please try to repair windows installer.With this MS tool.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Runtime error on Windows Mobile 6.1 after install

Similar Messages

Maybe you are looking for