Runtime errors in T code J1IDEPOTSTOCK1.
Hi Experts,
I am getting runtime errors in T code J1IDEPOTSTOCK1.
And Error is
Runtime Errors PERFORM_PARAMETER_MISSING
Except. CX_SY_DYN_CALL_PARAM_MISSING
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_PARAM_MISSING', was not caught and therefore caused a runtime error.
The reason for the exception is:
A PERFORM was used to call the routine "START-OF-SELECTION" of the program "J_1IDEPOTSTOCK1"
The current call contains 0 actual parameter(s), but the routine "START-OF-SELECTION" expects more than 0 parameters.
parameters.
Please give me advice.
Thanks in advance.
HI
You need to apply the code corrections as mentioned in the note as rightly said by the other member
Note 893139 - PERFORM_PARAMETER_MISSING dump in J_1IDEPOTSTOCK1 report*
regards
Prashanth
Similar Messages
-
Runtime Error in source code - LKKBLF99 during MB51
Dear All,
I have config receipt indicator: X Stock Transport Order in MB51. It is Working Completely good in Development in Quality. But it is having dump during i run into production server.
Information on where terminated
Termination occurred in the ABAP program "SAPLKKBL" - in "GEN_FIELD_OUT2".
The main program was "RM07DOCS ".
In the source code you have the termination point in line 2839
of the (Include) program "LKKBLF99".
2825 ----
2826 * FORM GEN_FIELD_OUT2 *
2827 ----
2828 * ........ *
2829 ----
2830 form gen_field_out2.
2831 field-symbols <l_initial>.
2832
2833 case gs_out-field_colcount.
2834 when 001.
2835 if gs_out_flags-slave ne 'X'.
2836 assign <fm01> to <field>.
2837 gs_fc = gs_mfc01.
2838 else.
>>>>> assign <fs01> to <field>.
2840 gs_fc = gs_sfc01.
2841 endif.
Don't understand what happened. Let me have some solution AEAP.
Regards,
Swapnil VaidyaRuntime Errors GETWA_NOT_ASSIGNED
Termination occurred in the ABAP program "SAPLKKBL" - in "GEN_FIELD_OUT2".
The main program was "RM07DOCS ".
In the source code you have the termination point in line 2839
of the (Include) program "LKKBLF99".
Source Code Extract
Line SourceCde
2809 of structure t_outtab_slave to <fs96>.
2810 gs_sfc96 = gs_out_fieldcat.
2811 when 97.
2812 assign component gs_out_fieldcat-fieldname
2813 of structure t_outtab_slave to <fs97>.
2814 gs_sfc97 = gs_out_fieldcat.
2815 when 98.
2816 assign component gs_out_fieldcat-fieldname
2817 of structure t_outtab_slave to <fs98>.
2818 gs_sfc98 = gs_out_fieldcat.
2819 when 99.
2820 assign component gs_out_fieldcat-fieldname
2821 of structure t_outtab_slave to <fs99>.
2822 gs_sfc99 = gs_out_fieldcat.
2823 endcase.
2824 endform. "field_assign_hier_slave
2825 ----
2826 * FORM GEN_FIELD_OUT2 *
2827 ----
2828 * ........ *
2829 ----
2830 form gen_field_out2.
2831 field-symbols <l_initial>.
2832
2833 case gs_out-field_colcount.
2834 when 001.
2835 if gs_out_flags-slave ne 'X'.
2836 assign <fm01> to <field>.
2837 gs_fc = gs_mfc01.
2838 else.
>>>>> assign <fs01> to <field>.
2840 gs_fc = gs_sfc01.
2841 endif.
2842 when 002.
2843 if gs_out_flags-slave ne 'X'.
2844 assign <fm02> to <field>.
2845 gs_fc = gs_mfc02.
2846 else.
2847 assign <fs02> to <field>.
2848 gs_fc = gs_sfc02.
2849 endif.
2850 when 003.
2851 if gs_out_flags-slave ne 'X'.
2852 assign <fm03> to <field>.
2853 gs_fc = gs_mfc03.
2854 else.
2855 assign <fs03> to <field>.
2856 gs_fc = gs_sfc03.
2857 endif.
2858 when 004. -
'OBJECTS_OBJREF_NOT_ASSIGNED_NO' Runtime Error in abap program
When my dubugger goes on this line..it gives me Runtime error'
'OBJECTS_OBJREF_NOT_ASSIGNED_NO'
CX_SY_REF_IS_INITIAL
Code :
CALL METHOD determine_budget_values->determine_budget_values
EXPORTING
plvar = '.:'
butyp = 'BU'
begda = '20060101' "'01.01.2006'
endda = '20061231' "'31.12.2006'
kcurr = 'X'
budot = 'BU'
budid = '50012433' "objektid
oldam = 1000
oldcu = 'USD'
oldno = 10
oldsu = 'USD'
IMPORTING
NEWAM = newam
NEWCU = newcu.
NEWNO =
NEWSU =
Thanx in advance....Its very urgent..Thanks a lott...for u r rhelp///
but one thing i would like to know after executing properly this method....will my HRP1520 will get those new values of budget of i will have to code it in Method ..specifically.
i m sending code for Method...
method IF_EX_HRECM00_BDG0001~DETERMINE_BUDGET_VALUES.
DATA: BEGIN OF fs_budgets ,
objid(8) TYPE n , " Object Id
flag TYPE c , " Monetary/Non Monetary
newam TYPE CHAR22 , " Budgeted Amount,
newcu TYPE CHAR05 , " Currency Key,
END OF fs_budgets ,
t_budgets LIKE TABLE OF fs_budgets.
DATA: w_sobid TYPE hrp1001-sobid , " Org. Unit
w_file TYPE rlgrap-filename . " File Name
DATA: t_orgunit TYPE hap_t_hrsobid , " Id of Org. unit
t_suborgunits TYPE hap_t_hrsobid , " Ids of Sub Org Units
fs_orgunit LIKE LINE OF t_orgunit. " Work Area of orgunit
REFRESH: t_orgunit,
t_suborgunits.
CLEAR : fs_orgunit..
The Budget values are stored in the file 'BUDGETS' on the App Server*
This data will be read from the App Server *
w_file = 'BUDGETS'.
OPEN DATASET w_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
Fetching the corresponding Org Unit for the Budget Id *
SELECT sobid " Org. Unit
FROM hrp1001
INTO w_sobid
WHERE plvar EQ '01'
AND otype EQ 'BU'
AND objid EQ budid
AND rsign EQ 'B'
AND relat EQ '300'
AND istat EQ '1'
AND begda LE endda
AND endda GE begda.
ENDSELECT. " SELECT sobid
IF sy-subrc EQ 0.
fs_orgunit-plvar = '01'.
fs_orgunit-otype = 'O'.
fs_orgunit-sobid = w_sobid.
APPEND fs_orgunit TO t_orgunit.
CLEAR fs_orgunit.
Fetching the Sub Org units for a given Org unit *
CALL FUNCTION 'HRHAP_SEL_OBJECTS_OF_EVAL_PATH'
EXPORTING
T_OBJECTS_BASE = t_orgunit
EVALUATION_PATH = 'ORGEH'
FROM_DATE = begda
TO_DATE = endda
IMPORTING
T_OBJECTS = t_suborgunits.
ENDIF. " IF sy-subrc EQ 0.
CLEAR newam.
Accumulating the budget values of all the Sub org units for a given *
Org unit and populating the fields 'newam' and 'newcu'. *
LOOP AT t_suborgunits INTO fs_orgunit.
CLOSE DATASET w_file.
OPEN DATASET w_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
DO.
READ DATASET w_file INTO fs_budgets.
IF sy-subrc EQ 0.
IF fs_budgets-objid EQ fs_orgunit-sobid.
ADD fs_budgets-newam TO newam.
newcu = fs_budgets-newcu.
EXIT.
ENDIF.
ELSE.
EXIT.
ENDIF. " IF sy-subrc EQ 0.
ENDDO. " DO
ENDLOOP. " LOOP AT t_suborgunits
Giving default values for the Budget Amount and Currency if they are*
containing Initial values *
IF newam IS INITIAL.
newam = 0.
ENDIF. " IF newam IS INITIAL.
IF newcu IS INITIAL.
newcu = 'USD'.
ENDIF. " IF newcu IS INITIAL.
CLOSE DATASET w_file.
endmethod.
After this code will i require to code anything specific to get this newam(new amount) uploaded to HRP1520 infotype or automatically it will upload if i write above mentioned code only...
Please revert......thanx a lot -
I have a request to create a Function Module that will be assigned to an Action Box, which when executed will copy long text for Quality Notification tasks. I have the module created and working, but after my code is executed a runtime error happens due to a null value being passed to a method in the SAP program QM07_UPDATE_ACTIONBOX. It looks to me like it is trying to perform some kind of cleanup tasks, and is trying to delete a node tree that does not exist. My code did nothing with any kind of node tree, so I am not sure how to avoid this runtime error. My code works as desired, except for this error that occurs after my code is processed. Any assistance would be greatly appreciated! Below are more details from the error received...
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not caught in procedure "QM07_UPDATE_ACTIONBOX" "(FUNCTION)", nor was it propagated by a RAISING clause. Since the caller of the procedure could not have anticipated that the exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing') access a component (variable: "TREE_ACTIONBOX"). An object reference must point to an object (an instance of a class) before it can be used to access components. Either the reference was never set or it was set to 'NULL' using the CLEAR statement.
Information on where terminated
Termination occurred in the ABAP program "SAPLQM07" - in "QM07_UPDATE_ACTIONBOX". The main program was "SAPLIQS0 ".
In the source code you have the termination point in line 39 of the (Include) program "LQM07U12". The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in procedure "QM07_UPDATE_ACTIONBOX" "(FUNCTION)", but it was neither handled locally nor declared in the RAISING clause of its signature.
The procedure is in program "SAPLQM07 "; its source code begins in line 1 of the (Include program "LQM07U12 ".
28 * bei Tree werden Knoten und Items gelöscht bei Table Control wird
29 * nur g_control_tab neu aufgebaut
30 if g_tree = c_x.
31 *---- Löschen der bestehenden Knoten und Items
32
33 * Tabelle der Knotenschlüssel erzeugen
34 loop at g_node_tab into l_node.
35 append l_node-node_key to l_dnodes_tab.
36 endloop.
37
38 * Items
>>>>> call method tree_actionbox->delete_all_items_of_nodes
40 EXPORTING
41 node_key_table = l_dnodes_tab
42 EXCEPTIONS
43 failed = 1
44 cntl_system_error = 2
45 error_in_node_key_table = 3
46 dp_error = 4.Yes, I have searched the notes. I used the keywords suggested in the dump...
If the error occures in a non-modified SAP program, you may be able to find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following keywords:
"OBJECTS_OBJREF_NOT_ASSIGNED" "CX_SY_REF_IS_INITIAL"
"SAPLQM07" or "LQM07U12"
"QM07_UPDATE_ACTIONBOX" -
How to raise exception in bor method without showing runtime error
I want to raise custom exception in the bor method like below. However, it will show runtime error when executing codes below. Any knows how to raise custom exception in the bor method without runtime error?
raise 9021.Hi Nick
You need to define the exception 9021 for the method and then you use the macro EXIT_RETURN as below
exit_return 9021 sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
Regards
Ravi -
Runtime Error CALL_FUNCTION_PARM_MISSING in a custom report program
Hi All,
I've created a custom report program to create parameters for a user in a system. I'm getting a runtime error in the code.
The code snippet as below.
I'm getting that error at line no 161. I'm not able to figure it out. Please help me to correct it.
Regards
Mandeep ShresthaHi Glenn,
I'm not creating a user. My requirement is to add a parameter
CRM_THTMLB_IE_COMP with value 'IE8'. I've written the below set of code to achieve that. Can you please help me further.
:i_userlist,i_return,l_errorrole,lv_rows,i_error,i_final,
l_e,lv_rows,l_s.
REFRESH i_bname1.
IF u_name IS NOT INITIAL.
SELECT bname FROM usr01 INTO TABLE
i_bname1 WHERE bname IN u_name.
IF sy-subrc = 0.
LOOP AT i_bname1 INTO wa_bname1.
wa_userlist-username = wa_bname1-bname.
APPEND wa_userlist TO i_userlist.
CLEAR wa_userlist.
ENDLOOP.
DESCRIBE TABLE i_bname1 LINES lv_rows.
ENDIF.
ELSE.
****get all the users****
CALL FUNCTION 'BAPI_USER_GETLIST'
EXPORTING
max_rows = 0
with_username = ' '
IMPORTING
ROWS = lv_rows
TABLES
* SELECTION_RANGE =
* SELECTION_EXP =
userlist = i_userlist
RETURN = i_return.
ENDIF.
****read the PFCG and Business Roles****
SELECT * FROM crmc_ui_profile INTO TABLE i_profile .
IF i_userlist IS INITIAL.
WRITE:'No Users'.
EXIT.
ELSE.
LOOP AT i_userlist INTO wa_userlist.
CLEAR: i_param,i_agrgrp,i_retagr,lv_pfcg.
"IF wa_userlist-username = 'BUILDER_B'.
CALL FUNCTION 'BAPI_USER_GET_DETAIL'
EXPORTING
username = wa_userlist-username
cache_results = 'X'
TABLES
PARAMETER = i_param
* PROFILES =
activitygroups = i_agrgrp
RETURN = i_retagr
* PARAMETER1 =
CLEAR :wa_agrgrp,l_errorrole,wa_retparm,v_business_unit.
CLEAR ls_sales_org.
CALL FUNCTION 'Z0CR_GET_USER_DETAILS'
EXPORTING
iv_username = wa_userlist-username
IMPORTING
* EV_USER_TYPE =
* EV_BUGROUPID =
es_sales_org = ls_sales_org
* EV_PARTNER_ID =
ev_business_unit = v_business_unit.
CALL METHOD CL_CRM_ORGMAN_SERVICES=>MAP_HROBJECT_TO_R3_SALES_ORG
EXPORTING
HROBJECT = ls_sales_org-SALES_ORG
* dbread =
IMPORTING
VKORG = L_ECC
EXCEPTIONS
NO_AUTHORIZATION = 1
NOT_FOUND = 2
OTHERS = 3.
*CALL FUNCTION 'CRM_BUPA_SALES_AREA_TO_R3'
* EXPORTING
* IS_SALES_AREA = ls_sales_org
* IMPORTING
* EV_VKORG = L_ECC
** EV_VTWEG =
** EV_SPART =
* EXCEPTIONS
* NO_MAPPING_DEFINED = 1
* R3_KEY_NOT_DEFINED = 2
* OTHERS = 3
*IF SY-SUBRC <> 0.
** Implement suitable error handling here
*ENDIF.
IF L_ECC = 2040 OR L_ECC = 2010 OR L_ECC = 2050 OR L_ECC = 1900.
** loop at i_param into wa_param .
* wa_param-PARID = 'CRM_THTMLB_IE_COMP' .
* wa_param-PARVA = 'IE8'.
* wa_param-PARTXT = 'CRM BW REPORT PARAMETER'.
* append wa_param to i_param.
** ENDLOOP.
* endif.
CLEAR lv_flag .
****checking if the role having prime support roles then assign the CRM_THTMLB_IE_COMP as IE8
CLEAR lt_role.
SELECT * FROM zuser_role INTO TABLE lt_role
FOR ALL ENTRIES IN i_agrgrp
WHERE pfcg_role = i_agrgrp-agr_name.
IF sy-subrc = 0.
lv_flag = 'X'.
ENDIF.
CLEAR :lv_land.
SELECT SINGLE land1 INTO lv_land FROM hrp1028 WHERE
otjid = ls_sales_org.
LOOP AT i_retagr INTO wa_retagr WHERE TYPE = 'E' OR TYPE = 'A'.
l_errorrole = 'X'.
ENDLOOP.
**error records
IF l_errorrole EQ 'X'.
l_e = l_e + 1.
CLEAR :lv_pfcg,lv_brole.
wa_error-user = wa_userlist-username.
wa_error-pfcg = lv_pfcg .
wa_error-role = lv_brole .
wa_error-MESSAGE = wa_retparm-MESSAGE .
APPEND wa_error TO i_error.
CLEAR l_errorrole.
ELSE.
CLEAR sy-subrc.
CLEAR :wa_param1,lv_vlaues,wa_param.
READ TABLE i_param INTO wa_param1
WITH KEY parid = 'CRM_THTMLB_IE_COMP'.
IF sy-subrc <> 0.
CLEAR wa_paramx.
wa_paramx-parid = 'X'.
wa_paramx-parva = 'X'.
CLEAR :wa_paramc,i_paramc.
wa_paramc-parid = 'CRM_THTMLB_IE_COMP'.
wa_paramc-parva = ' '.
APPEND wa_paramc TO i_paramc.
CALL FUNCTION 'BAPI_USER_CREATE'
EXPORTING
USERNAME = wa_userlist-username
TABLES
PARAMETER = i_paramc
RETURN = i_retparm.
ENDIF.
lv_vlaues = wa_param1-parva.
IF i_agrgrp IS INITIAL AND lv_vlaues IS NOT INITIAL.
CLEAR wa_paramx.
wa_paramx-parid = 'X'.
wa_paramx-parva = 'X'.
CLEAR :wa_paramc,i_paramc.
wa_paramc-parid = 'CRM_THTMLB_IE_COMP'.
wa_paramc-parva = ' '.
APPEND wa_paramc TO i_paramc.
CALL FUNCTION 'BAPI_USER_CHANGE'
EXPORTING
username = wa_userlist-username
parameterx = wa_paramx
* COMPANY =
TABLES
PARAMETER = i_paramc
RETURN = i_retparm
* PARAMETER1 = .
CLEAR :wa_retparm ,l_errorrole.
IF i_retparm IS NOT INITIAL.
LOOP AT i_retparm INTO wa_retparm WHERE TYPE = 'E' OR TYPE = 'A'.
l_errorrole = 'X'.
ENDLOOP.
ENDIF.
**error records
IF l_errorrole EQ 'X'.
l_e = l_e + 1.
wa_error-user = wa_userlist-username.
wa_error-pfcg = lv_pfcg .
wa_error-role = lv_brole .
wa_error-MESSAGE = wa_retparm-MESSAGE .
APPEND wa_error TO i_error.
CLEAR l_errorrole.
ELSE.
l_e = l_e + 1.
wa_error-user = wa_userlist-username.
wa_error-pfcg = lv_pfcg .
wa_error-role = lv_brole .
wa_error-MESSAGE = 'No Roles assigned to User' .
APPEND wa_error TO i_error.
CLEAR l_errorrole.
ENDIF.
ENDIF.
IF i_agrgrp IS NOT INITIAL .
CLEAR lv_count.
LOOP AT i_agrgrp INTO wa_agrgrp WHERE agr_name CP 'L*'.
CLEAR wa_profile.
READ TABLE i_profile
INTO wa_profile
WITH KEY pfcg_role = wa_agrgrp-agr_name.
IF sy-subrc EQ 0 AND
wa_profile-profile IS NOT INITIAL.
lv_count = lv_count + 1.
ENDIF.
ENDLOOP.
IF lv_count EQ '1'.
LOOP AT i_agrgrp INTO wa_agrgrp WHERE agr_name CP 'L*'.
CLEAR :wa_profile,lv_brole,lv_pfcg.
IF wa_agrgrp-agr_name CP 'L*'.
lv_pfcg = wa_agrgrp-agr_name.
READ TABLE i_profile
INTO wa_profile
WITH KEY
pfcg_role = wa_agrgrp-agr_name.
IF sy-subrc EQ 0.
** ***fill business role
lv_brole = wa_profile-profile.
ELSE.
l_e = l_e + 1.
CLEAR lv_brole.
wa_error-user = wa_userlist-username.
wa_error-pfcg = lv_pfcg .
wa_error-role = lv_brole .
wa_error-MESSAGE = 'No Business Role for PFCG' .
APPEND wa_error TO i_error.
CLEAR l_errorrole.
CONTINUE.
ENDIF.
ENDIF.
IF lv_brole IS NOT INITIAL.
CLEAR wa_paramx.
wa_paramx-parid = 'X'.
wa_paramx-parva = 'X'.
CLEAR :wa_paramc,i_paramc.
wa_paramc-parid = 'CRM_THTMLB_IE_COMP'.
IF lv_flag = 'X'.
lv_brole = 'IE8'.
wa_paramc-parva = lv_brole .
* CLEAR lv_flag.
ELSE.
wa_paramc-parva = lv_brole.
ENDIF.
APPEND wa_paramc TO i_paramc.
CALL FUNCTION 'BAPI_USER_CHANGE'
EXPORTING
username = wa_userlist-username
parameterx = wa_paramx
* COMPANY =
TABLES
PARAMETER = i_paramc
RETURN = i_retparm
* PARAMETER1 = .
CLEAR :wa_retparm .
IF i_retparm IS NOT INITIAL.
LOOP AT i_retparm INTO wa_retparm WHERE TYPE = 'E' OR TYPE = 'A'.
l_errorrole = 'X'.
ENDLOOP.
ENDIF. -
HT1443 I can't open iTunes. My PC gives a runtime error R6034. Please help !
I was updating my Quicktime i guess. There was a internet problem and i couldn't finish the update. After i got everytime a Runtime Error with the code R6034. I delete iTunes and Quicktime from my laptop and install them again but still i can't open iTunes on my laptop. Anyone has a idea to sowl this problem?
THXQuicktime is no longer a required component of iTunes. I would uninstall that and then fix the start-up issue with the following...
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
ABAP runtime error while executing T.code : PC00_M40_CALC
Hi,
I have applied SAP note 1568264 - Budget Changes 2011 as released by
SAP and i also applied the pre-requiste SAP notes mentioned in the
above SAP note
1) SAP Note 1558475- Amendments to IT calculation notified under
circular:08/2010.
2) SAP Note 1572614- Tax calculations inconsistent for emp. without a
vaild PAN.
3) SAP Note 1575366- HINCALC0:Tax calculation inconsistent in case of
invalid PAN.
After applying the SAP notes, when i am trying to execute the T.Code :
PC00_M40_CALC, i am getting an "Abap runtime error"
" Error in the ABAP Application Program
The current ABAP program "????????????????????????????????????????" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "HINCALC0 " in include "PCTAXIN0
" in
line 905:
""ENDUZ-" expected, not "EDU_""
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "S2K_BASIS "
Error in the ABAP Application Program
The current ABAP program "????????????????????????????????????????" had to be
terminated because it has
come across a statement that unfortunately cannot be executed. "
Kindly suggest me what has to be done on priority basis.
Regards
VishThe dump error is generally encountered if your system is at a lower Support Pack level. For implementing Note 1568264 (Budget Changes 2011), you need to be at the below mentioned pre-requisite level corresponding to your Release:
Prerequisites:
Release Support Package
604 HRSP29
600 HRSP63
500 HRSP80
470 HRSPB4
46C HRSPG9
The correct sequence to implement the Notes is:
SAP Note 1558475- Amendments to IT calculation notified under
circular:08/2010.
SAP Note 1572614- Tax calculations inconsistent for emp. without a
vaild PAN.
SAP Note 1575366- HINCALC0:Tax calculation inconsistent in case of
invalid PAN.
SAP Note 1568264- Budget Changes 2011
This should solve the issue unless there is some problem while implementing the Notes.
Regards,
Nishtha -
Runtime error while executing t-code NWP1
Hi!
One of our users is getting the runtime error CONVT_NO_NUMBER when she tries to execute the t-code NWP1. This is only with this user whereas her colleagues are able to execute it without any issues. Her decimal notation value in her UMR is specified as 1234,567.89, I changed it to other settings but still no luck. Does it have anything to do with her user parameters because this issue is only for this one user. Please help and thank you very much in advance
Regards,
AjDid you compare her user with another one that is working properly?....
Does it have anything to do with her user parameters because this issue is only for this one user
Most likely, that's way I suggest to compare the user... also you can try recreating the user to see if theres something wrong with her user master record.
Regards
Juan -
Hi- I applied the iTunes up to my Windows 7 86bit PC last Wednesday and iTunes will not load due to a Runtime error r6034Access to C Runtime Library Incorrectly. Then I get an windows error code 1114. I have tried rollling back and reinstalling but no joy
Hi Keen itunes User,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari -
T-code MDBT runtime error GETWA_NOT_ASSIGNED
Hell everyone.
I copied a client from another client,then I runned MRP in the new client by T-code MDBT.
It happened an error.
Can anybody tell me how I can reslove this issue?
Thanks & Best regards!
The detail error as below:
Runtime Errors GETWA_NOT_ASSIGNED
Date and Time 2010.06.19 11:01:46
Kurztext
Field symbol has not yet been assigned.
发生了什么?
Error in ABAP application program.
The current ABAP program "FCR05205" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
你能做什么?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
错误分析
You attempted to access an unassigned field symbol
(data segment 11).
This error may occur for any of the following reasons:
- You address a typed field symbol before it is set using ASSIGN
- You address a field symbol that points to a line in an internal table
that has been deleted
- You address a field symbol that had previously been reset using
UNASSIGN, or that pointed to a local field that no longer exists
- You address a global function interface parameter, even
though the relevant function module is not active,
that is it is not in the list of active calls. You can get the list
of active calls from the this short dump.
如何更正此错误
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system your
use the following search criteria:
"GETWA_NOT_ASSIGNED" C
"FCR05205" or "FCR05F00"
"PUT_P_VGWXX"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
Edited by: lzjsdxg on Jun 19, 2010 6:35 AMAre there anybody can help me?
Thanks! -
Runtime Error in ECC6 - for t-code PPOCE
HI Gurus!
at my client site , we have upgraded 4.7 to ECC6. Now functional consultants are testing the system.When HR consultant working on PPOCE t-code ,the patch no of SAP HR - 0007. its giving runtime error.
Runtime Errors CREATE_DATA_UNKNOWN_TYPE
Except. CX_SY_CREATE_DATA_ERROR Date and Time 19.08.2008 14:42:44
Short text
CREATE DATA: The specified type "HRP1680" is no valid data type.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLRHDB" had to be terminated because it has come across a statement that unfortunately cannot be executed.
Error analysis :An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CREATE_DATA_ERROR', was not caught in
procedure "FILL_I777D" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the exception would occur, the current program is terminated.
The reason for the exception is:
The dynamically specified type "HRP1680" at CREATE DATA is no valid data type.
The type is either unknown or an object type.
Missing RAISING Clause in Interface
Program SAPLRHDB
Include LRHDBF00
Row 177
Module type (FORM)
Module Name FILL_I777D
Trigger Location of Exception
Program SAPLRHDB
Include LRHDBF00
Row 308
Module type(FORM)
Module Name FILL_I777D
Source Code Extract
Line SourceCde
278 ** HEADER = FI_HEADER "ANDBCEK008264
279 ** TABLES "ANDBCEK008264
280 ** FIELDTAB = FI_TAB "ANDBCEK008264
281 ** EXCEPTIONS "ANDBCEK008264
282 ** OTHERS = 4. "ANDBCEK008264
283 * "ANDBCEK008264
284 * CALL FUNCTION 'DDIF_FIELDINFO_GET' "ANDBCEK008264
285 * EXPORTING "ANDBCEK008264
286 * tabname = fi_tabname "ANDBCEK008264
287 ** FIELDNAME = ' ' "ANDBCEK008264
288 ** LANGU = SY-LANGU "ANDBCEK008264
289 ** LFIELDNAME = ' ' "ANDBCEK008264
290 ** ALL_TYPES = ' ' "ANDBCEK008264
291 * IMPORTING "ANDBCEK008264
292 * x030l_wa = fi_header "ANDBCEK008264
293 ** DDOBJTYPE = "ANDBCEK008264
294 ** DFIES_WA = "ANDBCEK008264
295 ** TABLES "ANDBCEK008264
296 ** DFIES_TAB = "ANDBCEK008264
297 * EXCEPTIONS "ANDBCEK008264
298 * not_found = 1 "ANDBCEK008264
299 * internal_error = 2 "ANDBCEK008264
300 * OTHERS = 3. "ANDBCEK008264
301 *
302 * IF sy-subrc EQ 0.
303 * i777d-tbtab_tabof = fi_header-tablen - tabnr_intlen.
304 * i777d-pnnnn_tabof = i777d-tbtab_tabof - 8.
305 * ENDIF.
306
307 * ASSIGN char TO <any_field> CASTING TYPE (fi_tabname). "ANDDDIF
>>>>> create data anyfield type (fi_tabname). "ANDUNI
309 assign anyfield->* to <any_field>. "ANDUNI
310
311 * we need a character view of <any_field> !!! "ANDUNI
312 assign <any_field> to <char_field> casting type c. "ANDUNI
313
314 * DESCRIBE FIELD <any_field> LENGTH tablength "ANDDDIF
315 * IN BYTE MODE. "ANDDDIF
316
317 DESCRIBE FIELD <char_field> LENGTH tablength "ANDUNI
318 IN CHARACTER MODE. "ANDUNI
319
320 <i777d>-tbtab_tabof = tablength - tabnr_intlen. "ANDDDIF
321 <i777d>-pnnnn_tabof = <i777d>-tbtab_tabof - 8. "ANDDDIF
322
323 ENDIF.
324 IF <i777d>-ext_infty NE space. "VWMEXT
325 READ TABLE i77id
326 WITH KEY infty = <i777d>-infty
327 BINARY SEARCH.Hi Ramesh,
i have check the table HRP1680 in SAP4.7c but in ECC 6 it is not there. So i have create that table. Is it Info-type? or i have apply OSS notes.
regards
Rahul -
Runtime Error in HR module t-code PPOCE [upgraded 4.7 to ECC6]
HI Gurus!
at my client site , we have upgraded 4.7 to ECC6. Now functional consultants are testing the system.When HR consultant working on PPOCE t-code ,the patch no of SAP HR - 0007. its giving runtime error.
Runtime Errors CREATE_DATA_UNKNOWN_TYPE
Except. CX_SY_CREATE_DATA_ERROR Date and Time 19.08.2008 14:42:44
Short text
CREATE DATA: The specified type "HRP1680" is no valid data type.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLRHDB" had to be terminated because it has come across a statement that unfortunately cannot be executed.
Error analysis :An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CREATE_DATA_ERROR', was not caught in
procedure "FILL_I777D" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the exception would occur, the current program is terminated.
The reason for the exception is:
The dynamically specified type "HRP1680" at CREATE DATA is no valid data type.
The type is either unknown or an object type.
Missing RAISING Clause in Interface
Program SAPLRHDB
Include LRHDBF00
Row 177
Module type (FORM)
Module Name FILL_I777D
Trigger Location of Exception
Program SAPLRHDB
Include LRHDBF00
Row 308
Module type(FORM)
Module Name FILL_I777D
Source Code Extract
Line SourceCde
278 ** HEADER = FI_HEADER "ANDBCEK008264
279 ** TABLES "ANDBCEK008264
280 ** FIELDTAB = FI_TAB "ANDBCEK008264
281 ** EXCEPTIONS "ANDBCEK008264
282 ** OTHERS = 4. "ANDBCEK008264
283 * "ANDBCEK008264
284 * CALL FUNCTION 'DDIF_FIELDINFO_GET' "ANDBCEK008264
285 * EXPORTING "ANDBCEK008264
286 * tabname = fi_tabname "ANDBCEK008264
287 ** FIELDNAME = ' ' "ANDBCEK008264
288 ** LANGU = SY-LANGU "ANDBCEK008264
289 ** LFIELDNAME = ' ' "ANDBCEK008264
290 ** ALL_TYPES = ' ' "ANDBCEK008264
291 * IMPORTING "ANDBCEK008264
292 * x030l_wa = fi_header "ANDBCEK008264
293 ** DDOBJTYPE = "ANDBCEK008264
294 ** DFIES_WA = "ANDBCEK008264
295 ** TABLES "ANDBCEK008264
296 ** DFIES_TAB = "ANDBCEK008264
297 * EXCEPTIONS "ANDBCEK008264
298 * not_found = 1 "ANDBCEK008264
299 * internal_error = 2 "ANDBCEK008264
300 * OTHERS = 3. "ANDBCEK008264
301 *
302 * IF sy-subrc EQ 0.
303 * i777d-tbtab_tabof = fi_header-tablen - tabnr_intlen.
304 * i777d-pnnnn_tabof = i777d-tbtab_tabof - 8.
305 * ENDIF.
306
307 * ASSIGN char TO <any_field> CASTING TYPE (fi_tabname). "ANDDDIF
>>>>> create data anyfield type (fi_tabname). "ANDUNI
309 assign anyfield->* to <any_field>. "ANDUNI
310
311 * we need a character view of <any_field> !!! "ANDUNI
312 assign <any_field> to <char_field> casting type c. "ANDUNI
313
314 * DESCRIBE FIELD <any_field> LENGTH tablength "ANDDDIF
315 * IN BYTE MODE. "ANDDDIF
316
317 DESCRIBE FIELD <char_field> LENGTH tablength "ANDUNI
318 IN CHARACTER MODE. "ANDUNI
319
320 <i777d>-tbtab_tabof = tablength - tabnr_intlen. "ANDDDIF
321 <i777d>-pnnnn_tabof = <i777d>-tbtab_tabof - 8. "ANDDDIF
322
323 ENDIF.
324 IF <i777d>-ext_infty NE space. "VWMEXT
325 READ TABLE i77id
326 WITH KEY infty = <i777d>-infty
327 BINARY SEARCH.
i have check the table HRP1680 in SAP4.7c but in ECC 6 it is not there. So i have create that table. Is it Info-type? or i have apply OSS notes.
regards
Rahul
Edited by: rahul deshmukh on Aug 20, 2008 11:52 AMHello,
I receive the same error when trying to change records of an infotype. Did you find a solution to this problem? I know your message is from 2008, but maybe you remember what you did to solve it
Thank you!
Iuliana -
Transaction Code F.50 Runtime Error
Dear Friends,
While executing T.code F.50, I am getting the following Error
Runtime Errors SAPSQL_ARRAY_INSERT_DUPREC
Exceptn CX_SY_OPEN_SQL_DB
Date and Time 25.06.2009 11:27:31
ShrtText
The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLF049" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"SICHERN_IN_DB" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
Program SAPLF049
Include LF049F00
Row 74
Module type (FORM)
Module Name SICHERN_IN_DB
gger Location of Exception
Program SAPLF049
Include LF049F00
Row 86
Module type (FORM)
Module Name SICHERN_IN_DB
rce Code Extract
e SourceCde
56 * Insert von RF048 aus CRF048 (bei Commit Work) *
57 *----
58 FORM RELATION_SAVE.
59
60 CHECK NOT CRF048[] IS INITIAL.
61 INSERT RF048 FROM TABLE CRF048.
62 REFRESH CRF048.
63
64 ENDFORM. "RELATION_SAVE
65
66
67
68 *eject
69 *----
70 * Form SICHERN_IN_DB *
71 *----
72 * Masseninsert/update aus Z-Tabellen *
73 *----
74 FORM SICHERN_IN_DB.
75
76 * Lokale Daten
77 DATA:
78 ld_xnetb TYPE xnetb,
79 anz_belnr TYPE i.
80
81 *------ Aufteilungstabellen -
82
83 * Einfügen *
84
85 * BFIT_A0
>>> INSERT BFIT_A0 FROM TABLE ZBFIT_A0.
87 IF SY-SUBRC <> 0.
88 MESSAGE A153.
89 ENDIF.
90
91 * BFIT_A
92 INSERT BFIT_A FROM TABLE ZBFIT_A.
93 IF SY-SUBRC <> 0.
94 MESSAGE A154.
95 ENDIF.
96
97 * BFOD_A
98 INSERT BFOD_A FROM TABLE ZBFOD_A.
99 IF SY-SUBRC <> 0.
100 MESSAGE A155.
101 ENDIF.
102
103 * BFOD_AB
104 INSERT BFOD_AB FROM TABLE ZBFOD_AB.
105 IF SY-SUBRC <> 0.
How to reslove the error? Please advise.
Thanks and Regards
SridharHi,
Well it looks quite difficult to understand.......The only thing it says clearly that this is happening because of duplicate Primary Key insertion. -
ABAP Runtime ERROR Error Code & Syntax Error in program SAPLSFES
Hi,
I am installing SAP XI 3.0 and as part of that I have installed the ABAP and Java WAS. I am applying SPs for the ABAP stack and I successfully applied the BASIS SPs 10 and 11(applied seperately). I was applying the SPs 12 and 13(together) and after running for some time the system crashed and I restarted the O/S and SAP to see that the SPs didn't go thru. Now when I try to log on using SAP GUI, it says "<b>ABAP Runtime ERROR Error Code</b>" which is blank and at the Bottom there is this message "<b>Syntax Error in program SAPLSFES</b>".
Pls any one help me ,
Kind Regards,
Gopi.Hi Gopi,
If u r applying patches, the system would be running a background job SAPLSTPA. Hence you willnot be able to login till the job is complete.
You can check the job completion in the Windows MMC console.
Rgds
Ganesh
Maybe you are looking for
-
Is Firewire charging possible?
with the new Nano?
-
What is HAPPENING to my backups?!
Just two weeks ago I discovered that Time Machine had deleted all of my backups (starting in 2009) and only went back as far as February 25, 2011. Today I discover Time Machine's oldest backup is March 28, 2011, barely over a week ago! I needed to re
-
How Do I Manually Add A Skype Name To My Contacts?
I have the Skype Names for several contacts and would like to add them manually. Seems silly that I can add all sorts of telephone numbers to their profile but not their Skype Name. Anyone know how I do it?
-
How to suspend a single Active Job
Hello, I have started a transport and its background job is in released status. All the background jobs are in running status. I just want to suspend an active job and to transport the request and later i want to release that active job. With Regards
-
How to Execute FEBP and FEBA transaction codes
Hi All, Can you please explain me how to configure customizing for FINISTA in EBS. And also can you plz explain how to execute the t codes FBEP and FBEA. regards Madhavi