RV320: VPN periodically freezes up and requires router reboot
This occurs for both site-to-site as well as client vpn. When it occurs, VPN's can not reconnect. Is there a known issue?
hi, to this topic I'd like to post my problem. so i have wrt120n wireless router, and I had a problem with connecting two computers ( one PC on cable, other Notebook with wireless). When both computers is online, router start to reboot. Event wiever posted :
Your computer was not able to renew its address from the network (from the DHCP Server) for the Network Card with network address 0000E87303EE. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server. especially when trying to send a file between computers through skype.
so that first problem, now I can't connect to internet at all. I've found almost the same problem:.
The computer is able to connect to the router perfectly fine, but I can't get on to the internet because I'm unable to aquire an IP address from the router. Instead of giving me my 198.168.1.x IP, I'm getting a 169.254.x.x.
But the thing is that i can't connect to router adress 192.168.1.1, I tried to reset router but still nothing. any ideas? how connect to the router?
Similar Messages
-
WRT120N - wireless capability routinely fails and requires router reboot
I purchased the WRT120N wireless router about a month ago and have found that the wireless capability of this unit routinely fails. I have numerous wireless devices in our home but it's the Apple iTouches that use it most of the time. Every day or two the wireless function just stops working and I have to rebooot the unit via the admin web page. Then everything continues to work for a while until we notice that it has failed again. I upgraded the router firmware to v1.0.04 and followed the instructions carefully but this made no difference.
Searching the web revealed that this was a wide-spread and well documented problem. Many other forum posts warn consumers to avoid buying this cheap and unreliable product.
I am about to give up return the unit to the store I bought it from but thought I'd give one last chance to this forum to see if there was any fix or alternative.
Please advise. Thanks.
Solved!
Go to Solution.hi, to this topic I'd like to post my problem. so i have wrt120n wireless router, and I had a problem with connecting two computers ( one PC on cable, other Notebook with wireless). When both computers is online, router start to reboot. Event wiever posted :
Your computer was not able to renew its address from the network (from the DHCP Server) for the Network Card with network address 0000E87303EE. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server. especially when trying to send a file between computers through skype.
so that first problem, now I can't connect to internet at all. I've found almost the same problem:.
The computer is able to connect to the router perfectly fine, but I can't get on to the internet because I'm unable to aquire an IP address from the router. Instead of giving me my 198.168.1.x IP, I'm getting a 169.254.x.x.
But the thing is that i can't connect to router adress 192.168.1.1, I tried to reset router but still nothing. any ideas? how connect to the router? -
Site-to-site vpn with 2 asa and home router
I am trying to establish a site-to-site vpn between 2 ASAs and am able to get the tunnel to establish and can get connectivity from the remote end of the connection to the local side. However, traffic from the local side is not able to get to the remote end. We have 2 ASA 5505 establishing the tunnel, on the remote end there is a linksys home router forwarding all traffic to the ASA outside interface on a private subnet. Our layout is as follows.
Internal Network Local ASA ISP1 ISP2 Remote Router Remote ASA Remote Network
192.168.1.0/24 local-gateway/public ip public ip/192.168.0.1/24 192.168.0.10/10.10.10.254 10.10.10.0/24
10.10.10.0/24 (remote) -> 192.168.1.0/24 (local) works
192.168.1.0/24 (local) -> 10.10.10.0/24 (remote) does not work
Below are the configs of the local and remote asa. any help would be greatly appreaciated.
local-asa
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.6 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address dhcp setroute
same-security-traffic permit inter-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network Switch
host 192.168.1.5
description 2960-24 Switch
object network NETWORK_OBJ_192.168.1.0_24
subnet 192.168.1.0 255.255.255.0
object network Mark_Public
host 76.98.2.63
description Mark Public
object network Mark
subnet 10.10.10.0 255.255.255.0
description Marks Network
object network Mark_routed_subnet
subnet 192.168.0.0 255.255.255.0
access-list outside_access_in extended permit icmp any4 any4 echo-reply
access-list outside_access_in extended permit tcp any object home-app-svr object-group DM_INLINE_TCP_2
access-list outside_access_in extended permit ip object Mark 192.168.1.0 255.255.255.0
access-list outside_cryptomap extended permit ip 192.168.1.0 255.255.255.0 object Mark
access-list Home standard permit 192.168.1.0 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
icmp deny any outside
asdm image disk0:/asdm-711.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (inside,outside) source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 destination static Mark Mark no-proxy-arp
object network obj_any
nat (inside,outside) dynamic interface
access-group outside_access_in in interface outside
route outside 10.10.10.0 255.255.255.0 24.163.112.1 1
route outside 10.10.10.0 255.255.255.0 76.98.2.63 128
aaa-server Radius protocol radius
aaa-server Radius (inside) host 192.168.1.101
key *****
user-identity default-domain LOCAL
aaa authentication ssh console Radius LOCAL
aaa authentication telnet console Radius LOCAL
aaa authentication enable console Radius LOCAL
aaa authentication http console Radius LOCAL
aaa authentication serial console Radius LOCAL
aaa accounting enable console Radius
aaa accounting serial console Radius
aaa accounting ssh console Radius
aaa accounting telnet console Radius
http server enable
http 192.168.1.0 255.255.255.0 inside
http 66.162.9.0 255.255.255.0 outside
http 76.98.2.63 255.255.255.255 outside
http 10.10.10.0 255.255.255.0 inside
snmp-server host inside 192.168.1.101 community *****
snmp-server location 149 Cinder Cross
snmp-server contact Ted Stout
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
snmp-server enable traps syslog
snmp-server enable traps ipsec start stop
snmp-server enable traps entity config-change
snmp-server enable traps memory-threshold
snmp-server enable traps interface-threshold
snmp-server enable traps cpu threshold rising
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map outside_map0 1 match address outside_cryptomap
crypto map outside_map0 1 set peer 76.98.2.63
crypto map outside_map0 1 set ikev1 transform-set ESP-3DES-MD5 ESP-3DES-SHA
crypto map outside_map0 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map0 interface outside
crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map inside_map interface inside
crypto ca trustpoint ASDM_TrustPoint0
enrollment self
subject-name CN=stout-fw
keypair vpn.stoutte.homeip.net
crl configure
crypto ca trustpoint ASDM_TrustPoint1
enrollment terminal
crl configure
crypto ca trustpoint Home--Server-CA
enrollment terminal
subject-name CN=stout-fw,O=home
keypair HOME-SERVER-CA
crl configure
crypto ca trustpoint HOME-SSL
enrollment terminal
fqdn stoutfw.homeip.net
subject-name CN=stoutfw,O=Home
keypair HOME-SSL
no validation-usage
crl configure
crypto ca trustpoint SelfSigned
enrollment self
fqdn stoutfw.homeip.net
subject-name CN=stout-fw
keypair SelfSigned
crl configure
crypto ca trustpoint ASDM_TrustPoint2
enrollment self
fqdn 192.168.1.6
subject-name CN=stout-fw
keypair SelfSigned
crl configure
crypto ca trustpool policy
crypto ikev2 enable outside client-services port 443
crypto ikev2 remote-access trustpoint ASDM_TrustPoint0
crypto ikev1 enable inside
crypto ikev1 enable outside
telnet 192.168.1.0 255.255.255.0 inside
telnet timeout 20
ssh 192.168.1.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
management-access inside
threat-detection basic-threat
threat-detection statistics host
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 192.168.1.5 source inside prefer
ssl trust-point SelfSigned outside
ssl trust-point ASDM_TrustPoint2 inside
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol ikev1 l2tp-ipsec ssl-clientless
group-policy GroupPolicy1 internal
group-policy GroupPolicy1 attributes
vpn-tunnel-protocol ikev1
username stoutte password 0w8WOxYi69SDg3bs encrypted privilege 15
username stoutte attributes
webvpn
anyconnect keep-installer installed
anyconnect profiles value VPN_client_profile type user
tunnel-group 76.98.2.63 type ipsec-l2l
tunnel-group 76.98.2.63 general-attributes
default-group-policy GroupPolicy1
tunnel-group 76.98.2.63 ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group VPN type remote-access
tunnel-group VPN general-attributes
authentication-server-group Radius LOCAL
default-group-policy GroupPolicy_VPN
dhcp-server link-selection 192.168.1.101
tunnel-group VPN webvpn-attributes
group-alias VPN enable
class-map inspection_default
match default-inspection-traffic
remote-asa
: Saved
ASA Version 9.1(1)
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.10.10.254 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 192.168.0.10 255.255.255.0
ftp mode passive
clock timezone EDT -5
clock summer-time EDT recurring
dns server-group DefaultDNS
domain-name netlab.com
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network Ted
subnet 192.168.1.0 255.255.255.0
description Teds Network
object network Ted_Public
host 24.163.116.187
object network outside_private
subnet 192.168.0.0 255.255.255.0
object network NETWORK_OBJ_10.10.10.0_24
subnet 10.10.10.0 255.255.255.0
access-list outside_cryptomap extended permit ip 10.10.10.0 255.255.255.0 object Ted
access-list outside_access_in extended permit icmp any4 any4 echo-reply
access-list outside_access_in extended permit ip object Ted 10.10.10.0 255.255.255.0
access-list outside_access_in extended permit ip object Ted_Public any
pager lines 24
logging enable
logging buffered debugging
logging asdm informational
logging debug-trace
nat (inside,outside) source static NETWORK_OBJ_10.10.10.0_24 NETWORK_OBJ_10.10.10.0_24 destination static Ted Ted no-proxy-arp
object network obj_any
nat (inside,outside) dynamic interface
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 192.168.0.1 1
route outside 192.168.1.0 255.255.255.0 192.168.0.1 1
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 24.163.116.187 255.255.255.255 outside
http 192.168.0.0 255.255.255.0 outside
http 10.10.10.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
crypto map outside_map2 1 match address outside_cryptomap
crypto map outside_map2 1 set peer 24.163.116.187
crypto map outside_map2 1 set ikev1 transform-set ESP-3DES-MD5 ESP-3DES-SHA
crypto map outside_map2 interface outside
crypto ikev2 enable outside
crypto ikev2 enable inside
crypto ikev1 enable outside
crypto ikev1 enable inside
ssh 10.10.10.0 255.255.255.0 inside
ssh timeout 30
console timeout 0
dhcpd address 10.10.10.1-10.10.10.20 inside
dhcpd enable inside
group-policy GroupPolicy1 internal
group-policy GroupPolicy1 attributes
vpn-tunnel-protocol ikev1
username admin password 8Ec7AqG6iwxq6gQ2 encrypted privilege 15
tunnel-group 24.163.116.187 type ipsec-l2l
tunnel-group 24.163.116.187 general-attributes
default-group-policy GroupPolicy1
tunnel-group 24.163.116.187 ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:2f4107de10e7171c3d951745c56b8d01
: end
no asdm history enableI am trying to establish a site-to-site vpn between 2 ASAs and am able to get the tunnel to establish and can get connectivity from the remote end of the connection to the local side. However, traffic from the local side is not able to get to the remote end. We have 2 ASA 5505 establishing the tunnel, on the remote end there is a linksys home router forwarding all traffic to the ASA outside interface on a private subnet. Our layout is as follows.
Internal Network Local ASA ISP1 ISP2 Remote Router Remote ASA Remote Network
192.168.1.0/24 local-gateway/public ip public ip/192.168.0.1/24 192.168.0.10/10.10.10.254 10.10.10.0/24
10.10.10.0/24 (remote) -> 192.168.1.0/24 (local) works
192.168.1.0/24 (local) -> 10.10.10.0/24 (remote) does not work
Below are the configs of the local and remote asa. any help would be greatly appreaciated.
local-asa
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.6 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address dhcp setroute
same-security-traffic permit inter-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network Switch
host 192.168.1.5
description 2960-24 Switch
object network NETWORK_OBJ_192.168.1.0_24
subnet 192.168.1.0 255.255.255.0
object network Mark_Public
host 76.98.2.63
description Mark Public
object network Mark
subnet 10.10.10.0 255.255.255.0
description Marks Network
object network Mark_routed_subnet
subnet 192.168.0.0 255.255.255.0
access-list outside_access_in extended permit icmp any4 any4 echo-reply
access-list outside_access_in extended permit tcp any object home-app-svr object-group DM_INLINE_TCP_2
access-list outside_access_in extended permit ip object Mark 192.168.1.0 255.255.255.0
access-list outside_cryptomap extended permit ip 192.168.1.0 255.255.255.0 object Mark
access-list Home standard permit 192.168.1.0 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
icmp deny any outside
asdm image disk0:/asdm-711.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (inside,outside) source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 destination static Mark Mark no-proxy-arp
object network obj_any
nat (inside,outside) dynamic interface
access-group outside_access_in in interface outside
route outside 10.10.10.0 255.255.255.0 24.163.112.1 1
route outside 10.10.10.0 255.255.255.0 76.98.2.63 128
aaa-server Radius protocol radius
aaa-server Radius (inside) host 192.168.1.101
key *****
user-identity default-domain LOCAL
aaa authentication ssh console Radius LOCAL
aaa authentication telnet console Radius LOCAL
aaa authentication enable console Radius LOCAL
aaa authentication http console Radius LOCAL
aaa authentication serial console Radius LOCAL
aaa accounting enable console Radius
aaa accounting serial console Radius
aaa accounting ssh console Radius
aaa accounting telnet console Radius
http server enable
http 192.168.1.0 255.255.255.0 inside
http 66.162.9.0 255.255.255.0 outside
http 76.98.2.63 255.255.255.255 outside
http 10.10.10.0 255.255.255.0 inside
snmp-server host inside 192.168.1.101 community *****
snmp-server location 149 Cinder Cross
snmp-server contact Ted Stout
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
snmp-server enable traps syslog
snmp-server enable traps ipsec start stop
snmp-server enable traps entity config-change
snmp-server enable traps memory-threshold
snmp-server enable traps interface-threshold
snmp-server enable traps cpu threshold rising
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map outside_map0 1 match address outside_cryptomap
crypto map outside_map0 1 set peer 76.98.2.63
crypto map outside_map0 1 set ikev1 transform-set ESP-3DES-MD5 ESP-3DES-SHA
crypto map outside_map0 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map0 interface outside
crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map inside_map interface inside
crypto ca trustpoint ASDM_TrustPoint0
enrollment self
subject-name CN=stout-fw
keypair vpn.stoutte.homeip.net
crl configure
crypto ca trustpoint ASDM_TrustPoint1
enrollment terminal
crl configure
crypto ca trustpoint Home--Server-CA
enrollment terminal
subject-name CN=stout-fw,O=home
keypair HOME-SERVER-CA
crl configure
crypto ca trustpoint HOME-SSL
enrollment terminal
fqdn stoutfw.homeip.net
subject-name CN=stoutfw,O=Home
keypair HOME-SSL
no validation-usage
crl configure
crypto ca trustpoint SelfSigned
enrollment self
fqdn stoutfw.homeip.net
subject-name CN=stout-fw
keypair SelfSigned
crl configure
crypto ca trustpoint ASDM_TrustPoint2
enrollment self
fqdn 192.168.1.6
subject-name CN=stout-fw
keypair SelfSigned
crl configure
crypto ca trustpool policy
crypto ikev2 enable outside client-services port 443
crypto ikev2 remote-access trustpoint ASDM_TrustPoint0
crypto ikev1 enable inside
crypto ikev1 enable outside
telnet 192.168.1.0 255.255.255.0 inside
telnet timeout 20
ssh 192.168.1.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
management-access inside
threat-detection basic-threat
threat-detection statistics host
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 192.168.1.5 source inside prefer
ssl trust-point SelfSigned outside
ssl trust-point ASDM_TrustPoint2 inside
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol ikev1 l2tp-ipsec ssl-clientless
group-policy GroupPolicy1 internal
group-policy GroupPolicy1 attributes
vpn-tunnel-protocol ikev1
username stoutte password 0w8WOxYi69SDg3bs encrypted privilege 15
username stoutte attributes
webvpn
anyconnect keep-installer installed
anyconnect profiles value VPN_client_profile type user
tunnel-group 76.98.2.63 type ipsec-l2l
tunnel-group 76.98.2.63 general-attributes
default-group-policy GroupPolicy1
tunnel-group 76.98.2.63 ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group VPN type remote-access
tunnel-group VPN general-attributes
authentication-server-group Radius LOCAL
default-group-policy GroupPolicy_VPN
dhcp-server link-selection 192.168.1.101
tunnel-group VPN webvpn-attributes
group-alias VPN enable
class-map inspection_default
match default-inspection-traffic
remote-asa
: Saved
ASA Version 9.1(1)
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.10.10.254 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 192.168.0.10 255.255.255.0
ftp mode passive
clock timezone EDT -5
clock summer-time EDT recurring
dns server-group DefaultDNS
domain-name netlab.com
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network Ted
subnet 192.168.1.0 255.255.255.0
description Teds Network
object network Ted_Public
host 24.163.116.187
object network outside_private
subnet 192.168.0.0 255.255.255.0
object network NETWORK_OBJ_10.10.10.0_24
subnet 10.10.10.0 255.255.255.0
access-list outside_cryptomap extended permit ip 10.10.10.0 255.255.255.0 object Ted
access-list outside_access_in extended permit icmp any4 any4 echo-reply
access-list outside_access_in extended permit ip object Ted 10.10.10.0 255.255.255.0
access-list outside_access_in extended permit ip object Ted_Public any
pager lines 24
logging enable
logging buffered debugging
logging asdm informational
logging debug-trace
nat (inside,outside) source static NETWORK_OBJ_10.10.10.0_24 NETWORK_OBJ_10.10.10.0_24 destination static Ted Ted no-proxy-arp
object network obj_any
nat (inside,outside) dynamic interface
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 192.168.0.1 1
route outside 192.168.1.0 255.255.255.0 192.168.0.1 1
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 24.163.116.187 255.255.255.255 outside
http 192.168.0.0 255.255.255.0 outside
http 10.10.10.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
crypto map outside_map2 1 match address outside_cryptomap
crypto map outside_map2 1 set peer 24.163.116.187
crypto map outside_map2 1 set ikev1 transform-set ESP-3DES-MD5 ESP-3DES-SHA
crypto map outside_map2 interface outside
crypto ikev2 enable outside
crypto ikev2 enable inside
crypto ikev1 enable outside
crypto ikev1 enable inside
ssh 10.10.10.0 255.255.255.0 inside
ssh timeout 30
console timeout 0
dhcpd address 10.10.10.1-10.10.10.20 inside
dhcpd enable inside
group-policy GroupPolicy1 internal
group-policy GroupPolicy1 attributes
vpn-tunnel-protocol ikev1
username admin password 8Ec7AqG6iwxq6gQ2 encrypted privilege 15
tunnel-group 24.163.116.187 type ipsec-l2l
tunnel-group 24.163.116.187 general-attributes
default-group-policy GroupPolicy1
tunnel-group 24.163.116.187 ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:2f4107de10e7171c3d951745c56b8d01
: end
no asdm history enable -
EZ VPN client in DMZ and a router-on-a-stick
Does anyone know if it is possible to use a Cisco 1811 as an EZVPN client
while the router is setup with only one interface? I have a customer that
requested their VPN router to us be setup in their DMZ with no public facing
interface on the 1811 (VPN device). I usually configure our VPN
configurations with an internet facing interface and a DMZ facing interface.I don't think it is possible with only one *logical* interface. Router as a EZVPN Client requires two interfaces to do PAT for traffic going to the Internet. So far as I know, this is autoconfigured in both Client and NEM modes and cannot be disabled. However you *can* use 802.1q trunk to create two *logical* interfaces and configure EZVPN Client, or just configure Site-to-Site on a stick.
HTH -
Activating email spellchecker often freezes screen and requires restart
I complete the email and it contains spelling errors.
Hitting the spell check button starts the little circular ball (thing) and the screen freezes.
I have to finally exit the Thunderbird email programme entirely and restart. If I am lucky, the draft file might have captured some of the email, however I then have to manually correct spelling errors or I get a repeat of the above.
Any assistance much appreciated. ThanksHow do I fix this?
Use iOS 6, wait for iOS 7.1. -
After some heavy lifting ( backing up or working in several applications) the system will slow down to a crawl and then freeze. A hard shutdown and restart will usually not reboot it. I typically get a white screen with a floder with a ? mark on it, a circle with a line through it, an Apple logo with a spinning wheel for many hours (I let it go overnight once to no avail), or a simple white screen. The disk checks out fine with Drive Genius and disk usility, from both the hard disk (when I can get it running) and from the Disk utilite and Drive Genius Disks. I have erased (zeroed out) the disk and reinstalled Snow Leopard several times with all updates. Reparied permissions successfully. It runs swimmingly until I start loading up files and try to use them or tao back up to Time Machine on a Time Capsule. It will then repeat the whole scenario. Often, If I leave it shut down for an hour or two, or overnight, it will boot fine, even after all of the prior white screens.
I have taken it to the Genius Bar a coupole of times, and they have done a system reinstall and analysis to no avail. Everything looks fine. Infact, ast time it had rested and while it did not boot before I left, it did fine there.
The only devices connected are an ethernet cable, bluetooth mouse, and keyboard. What's up?
I think this is a hardware not a software issue.BankerDad, let's see if we can change this device's behavior. Is there any physical or liquid damage on that device? Connect it to a charger to see if the charging battery icon populates on the screen. Keep us posted.
LasinaH_VZW
Follow us on Twitter @VZWSupport -
Screen saver freezing... requires hard reboot
I'm using the Shell screensaver and displaying the clock in it. I'm often finding overnight that the screensaver is frozen. It must wake the display up since the screensaver is set to go on after 15min of inactivity and then the screen should go to sleep after 30min. When I got to bed, the screen is off.
Then in the middle of the night I'll wake up and the room is illuminated by the frozen screensaver. The time displayed is usually a few hours old. The keybd and mouse do not wake the machine. So, I have to hold the power button down until it turns off and then turn it back on again.
Any ideas what's going on? This has been going on since at least 10.5.3 and I'm on 10.5.6 now.
ThanksRemoving the plist worked... for a while. Then it started freezing again. I was using the shells screensaver and displaying the time.
I removed the plists again and then decided to go back to the flurry screensaver w/o the clock. Well, so far no freezes, however, the screensaver sometimes doesn't come up or it runs for a while and the goes back to showing the desktop. I have it set so the screensaver kicks in after 15min of inactivity and then the display should go to sleep in another 5min. Many times, the screen never goes to sleep.
In a related issue, just the other night I couldn't get the screensaver to come on by moving my mouse pointer to the hotcorner. So, I powered off the iMac. Then about 2min later, the iMac powers back on and I couldn't get it to stay off. This has also happened before... I always have to pull the plug on it.
God I hope Snow Leopard cleans up these crufty corners of OS X! -
E3000 parental controlled laptops require router reboot
I have an E3000 router connecting 4 laptops wirelessly. They are all the same model and OS machines, Dell Latitude E6510 with Windows 7 Pro.
I have 2 of the computers under parental control to disable the internet each night.
In the morning after the time to re-enable internet to the two controlled computers, they still won't connect
until I reboot the router.
I tried rebooting the machines instead.
I have to re-boot the router every day since we started last week to re-enable their internet access.
I called support who checked out my router settings through a remote connection and they said the settings are correct.
Call if it happens again.
Any help is appreciated,
DanI have found that if either of the restricted computers are left on through/during the time reset boundry, that we have this problem. Once I made sure the computers were shut down (not just in sleep or hibernate) then the restoration to access works.
Maybe this is normal?
Dan -
Wrt600n connectivity loss requiring router reboot every day
the fun never stops with this router. i have to say that out of the 5 previous AP's / routers, this one has had more issues than the previous 5 combined.
at any rate, i am now seeing the ap lose all network connectivity every day, or every other day at best. i have to then reboot the thing, and the cycle repeats.
has anyone else seen this behavior, and if so any suggestions on how to fix it?Have you tried to upgrade the firmware of your Router, If not then you can upgrade the firmware of your Router and i think this might solve the problem.Go to website linksysbycisco.com/downloads.........insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop..
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router... -
My network card goes to sleep and requires a reboot
I recently upgrade my MAC-Pro to OSX 10.9.
When my computer goes to sleep it seems my network card goes to sleep as well.
The computer comes back, but I have to restart to get my network card to work again.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
I believe I have tried everything. I tried execution via CMD firefox.exe -p and I only see one profile. I have it set not to update at all. I don't mind updates, really, but when my PC needs a reboot to use FF that is an issue with me. Sometimes it is only when I try to execute a hyperlink from a program such as e-mail (Outlook 2010), but at times the entire FF application gets hosed and the cursor just blinks while in the FF environment.
Sometime I do video editing, am engaged in a MS practice exam, or corresponding via time sensitive e-mail. Rebooting when FF tells me too is often inconvenient, and yea I know I can switch back to IE on the fly, but its hard to keep bookmarks, and settings on two or more browsers simultaneously, and it is all about a positive user experience, is it not?
Any help, answers, suggestions?
Thanks, TonyFirefox shouldn't need a Windows reboot to update.
If this is needed then it means that some file were in use by another applications (possibly security software) and Firefox wasn't able to replace/update all the files.
If you have such security software them you would have to contact them for support and ask how to disable this feature or switch to other security software that doesn't has this feature.
Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) to see if that has effect.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/ -
MBP shuts down and requires a reboot (not a wake up)
I have a MBP that is running 10.5.8. When the power gets low and the MBP shuts down, I have to reboot it (push the power button). This is not the case with our iBook, or MacBook (I should double check it), here we just plug it in, hit the space bar and it starts up where it left off (just like it was asleep).
Is there some setting or ?
ThanksIf there is Warranty or AppleCare make Genius reservation or set up Service and take or send to Apple for resolution. If no coverage, you can use virtual Lock Button. Tap Settings App > General > Assessibility > Assistive Touch > ON > tap new white screen button > Device > Lock Screen. This can even be used to turn OFF iPhone, by holding down on it. To turn iPhone ON, connect to power, charger or USB of computer.
-
Mail notifications stop working and require a reboot to work again.
Why do my mail notifications stop showing up on my iPhone 4s after a day or two? It usually works again after a reboot but then stops working again after a day or two? Very annoying. I have an iPad 2 as well, which is running iOS5 (like my iPhone 4s) and I don't have this notification problem like I do on my iPhone 4s. My mail is a converted MobileMe mail account that is now an iCloud account. Any help would be appreciated!
Thanks,
Scottstevejobsfan0123 wrote:
Settings > Notifications > Mail, what does it say?
Thanks for your reply! Mail notifications are turned on and I have it set to show the last 10 notifcations, I am using the banner and alert sounds.
Like I said, it works but then after "a while" it stops working until I do a reboot... It is very consistent in this pattern.
Also, I use the Twitter App (official one) and I have never gotten a notification even though I have Notifications turned on for Twitter too.
Thanks,
Scott -
Site-Site VPN PIX501 and CISCO Router
Hello Experts,
I'm having a test lab at home, I configure a site-to-site vpn using Cisco PIX501 and CISCO2691 router, for the configurations i just some links on the internet because my background on VPN configuration is not too well, for the routers configuration i follow this link:
www.firewall.cx/cisco-technical-knowledgebase/cisco-routers/867-cisco-router-site-to-site-ipsec-vpn.html
and for the pIX configuration I just use the VPN wizard of pix. Done all the confgurations but ping is unsuccessful. Hope you can help me with this, don't know what needs to be done here (Troubleshooting).
Attached here is my router's configuration, topology as well as the pix configuration. Hope you can help me w/ this. Thanks in advance.YES! IT FINALLY WORKS NOW! Here's the updated running-config
: Saved
PIX Version 7.2(2)
hostname PIX
domain-name aida.com
enable password 2KFQnbNIdI.2KYOU encrypted
names
name 172.21.1.0 network2 description n2
interface Ethernet0
speed 100
duplex full
nameif OUTSIDE
security-level 0
ip address 1.1.1.1 255.255.255.252
interface Ethernet1
nameif INSIDE
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Ethernet2
shutdown
no nameif
no security-level
no ip address
interface Ethernet3
shutdown
no nameif
no security-level
no ip address
interface Ethernet4
shutdown
no nameif
no security-level
no ip address
passwd 2KFQnbNIdI.2KYOU encrypted
ftp mode passive
dns server-group DefaultDNS
domain-name aida.com
access-list TO_ENCRYPT_TRAFFIC extended permit ip 192.168.1.0 255.255.255.0 network2 255.255.255.0
access-list nonat extended permit ip 192.168.1.0 255.255.255.0 network2 255.255.255.0
pager lines 24
mtu OUTSIDE 1500
mtu INSIDE 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image flash:/asdm-524.bin
no asdm history enable
arp timeout 14400
global (OUTSIDE) 1 interface
nat (INSIDE) 0 access-list nonat
nat (INSIDE) 1 192.168.1.0 255.255.255.0
route OUTSIDE 0.0.0.0 0.0.0.0 1.1.1.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
username mark password MwHKvxGV7kdXuSQG encrypted
http server enable
http 192.168.1.3 255.255.255.255 INSIDE
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set MYSET esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto map MYMAP 10 match address TO_ENCRYPT_TRAFFIC
crypto map MYMAP 10 set peer 2.2.2.2
crypto map MYMAP 10 set transform-set MYSET
crypto map MYMAP interface OUTSIDE
crypto isakmp enable OUTSIDE
crypto isakmp policy 1
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
tunnel-group 2.2.2.2 type ipsec-l2l
tunnel-group 2.2.2.2 ipsec-attributes
pre-shared-key *
telnet timeout 5
ssh timeout 5
console timeout 0
prompt hostname context
Cryptochecksum:8491323562e3f1a86ccd4334cd1d37f6
: end
ROUTER:
R9#sh run
Building configuration...
Current configuration : 3313 bytes
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname R9
boot-start-marker
boot-end-marker
aaa new-model
aaa authentication login default local
aaa authorization config-commands
aaa authorization exec default local
aaa session-id common
resource policy
memory-size iomem 5
ip cef
no ip domain lookup
ip domain name aida.com
ip ssh version 2
crypto pki trustpoint TP-self-signed-998521732
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-998521732
revocation-check none
rsakeypair TP-self-signed-998521732
crypto pki certificate chain TP-self-signed-998521732
A75B9F04 E17B5692 35947CAC 0783AD36 A3894A64 FB6CE1AB 1E3069D3
A818A71C 00D968FE 3AA7463D BA3B4DE8 035033D5 0CA458F3 635005C3 FB543661
9EE305FF 63
quit
username mark privilege 15 secret 5 $1$BTWy$PNE9BFeWm1SiRa/PiO9Ak/
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp key cisco address 1.1.1.1 255.255.255.252
crypto ipsec transform-set MYSET esp-3des esp-sha-hmac
crypto map MYMAP 10 ipsec-isakmp
set peer 1.1.1.1
set transform-set MYSET
match address TO_ENCRYPT_TRAFFIC
interface FastEthernet0/0
ip address 2.2.2.2 255.255.255.252
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
crypto map MYMAP
interface FastEthernet0/1
ip address 172.21.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
ip route 0.0.0.0 0.0.0.0 2.2.2.1
ip http server
ip http authentication local
ip http secure-server
ip nat inside source list NAT_IP interface FastEthernet0/0 overload
ip access-list extended NAT_IP
deny ip 172.21.1.0 0.0.0.255 192.168.1.0 0.0.0.255
permit ip 172.21.1.0 0.0.0.255 any
ip access-list extended TO_ENCRYPT_TRAFFIC
permit ip 172.21.1.0 0.0.0.255 192.168.1.0 0.0.0.255
control-plane
line con 0
exec-timeout 0 0
logging synchronous
line aux 0
line vty 0 4
transport input ssh
end -
MASSIVE freeze-up and will not export to soundtrack issues
Seems I have started having a couple of new issues with FCP
1. While playing back a work in progress the computer will freeze up and requires a hard boot. This has just started and seems to come at the absolute worse moments....usually when I forget to SAVE
2. I can no longer export my tracks to soundtrack pro. I get an error message that says it has failed.
reinstall?
Any clues?Well, the first and easiest thing to try is trashing your prefs. FCP Rescue can help with that:
http://pistolerapost2.com/fcprescue/
More help requires more information. Please tell us more.
Patrick
Maybe you are looking for
-
Call RFC with DLL created with DCOM CONNECTOR
I try to call a RFC with a DLL that i created with the SAP R/3 DCOM CONNECTOR (Release 4.5.B): My external soft calls the DLL, which calls the RFC, which calls a transaction (Call Transaction Mode N, Update S)... When i test the RFC in SAP (SE37), it
-
Editing particular pattern in an input text in ADF
Hi, I have a requirement in ADF like the user should be able to editable only a particular pattern. Example: Name: Chandramohan Hobbies: My hobbies are {}, {}, {} In the above hobbies filed( say textarea or input text), the user should be able to rep
-
Hello, I'm taking a PhoneGap Mobile Apps class this semester in college. I'm using Win7, with CS6. We are the ginny-pig class. First time being taught at school. Please explain.We are using Dreamweaver as our IDE? Now I need to download the PhoneGap
-
Upgrade iPod touch from 3.1.3 to 4.2
Hey everyone! Sorry this is my first post here, and I'm not super computer savvy, so pardon me if I'm a little slow at figuring this out. I'd like to update my ipod touch to the newest software, however, reading around the forums I heard it deletes t
-
Re: My printer is not printing attachments.
GraceRg wrote: My c510 is not printing attachments. When a fax arrives, the cover prints but not the fax image. When emails arrive with attachments, the message prints but the attachment does not. Any suggestions? My printer will print e-mails but do