RWB Integration Engine status yellow

We're getting a yellow triangle for "Is Web service security available?" What/where should I start checking?
-thanks

Hi Henry,
Try latest "Configuration guide"
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ac6de690-0201-0010-54ac-8923089dcc97
12.4 Security Configuration at Message Level
12.4.1 Configuring Web Service Security in the ABAP Stack
12.4.2 Configuring Web Service Security in the Java Stack
12.4.3 Verifying the Web Service Security Configuration
Regards,
michal

Similar Messages

RWB - Integration Engine self test - web service security and proxy

Hi,
I am working with a new installation of PI 7.0. In the runtime workbench, under self test for integration engine, there is this error/warning:
""Details for 'Is Web service security available?'
Communication error: Proxy calls are not permitted on sender or receiver side on the IS (client)""
What exactly is the problem? Is there any additional configuration needed within PI to use proxies? We do not have the cryptographic toolkit installed. Is that nesseccary to work with proxies? We have done several other scenarios with RFC, MAIL, HTTP, etc and they work fine. If anyone else had this problem and managed to fix it, please let me know..
Thanks,
Lasya

You can ignore this error. It is simply a warning that says message level security has not been configured. Without message security too, you can do proxy communication.
But, if you want to configure messag level security, go through XI Config guide section 12.4.
Message was edited by: Jay

RWB Integration Engine Monitoring doesn't work

When I am trying to see details of message (Message Content ) rbw shows the following page:
Service cannot be reached
What has happened?
URL http://xiserver:8000/sap/public/bc/its/mimes/system/99/page/hourglass.html call was terminated because the corresponding service is not available.
Whiv service do I need to start? SP14
Message was edited by: Sergey A

I have activated its.
Now I get an excption
java.rmi.RemoteException: com.sap.engine.services.ejb.exceptions.BaseRemoteException: Exception in method com.sap.aii.mdt.server.MessageMonitoringObjectImpl11.getMessageList().
;nested exception is:
java.lang.NullPointerException
at com.sap.engine.services.ejb.exceptions.BaseRemoteException.writeReplace(BaseRemoteException.java:276)
Do I need to restart XI?

Error In Runtime Workbench (Integration Engine)

Hi All,
I have an issue with the PI Netweaver 7.0 SR3.We change the client from 001 to newclient by following SAP NOTE.
Everything is happening fine except while i use Transaction SXMB_IFR and then Run Time Work Bench in component monitoring Integration Engine is not in Healthy State,Its showing Yellow Signal and a message is like this
Is Web service security available?
Description :Communication error Proxy calls are not permitted on sender or receiver side on the IS (client)
Also Business Process Engine is also Showing Yellow Signal as
Schedule Background Job for Missed Deadlines
    Schedule Background Job for Work Items with Errors
    Schedule Background Job for Event Queue
    Schedule background job for clearing report
    Schedule Background Job for Shared-Memory Update of Container Fa
    Schedule Background Job for Deadline Monitoring
So please suggest how to proceed to fix these issues.
Thanks,
Gagan Deep Kaushal

Hi,
for WS security please have a look at this page (last question)
http://help.sap.com/saphelp_NW04/helpdata/en/a5/1b5342d8a7be30e10000000a155106/content.htm
you can also try my answer from:
Re: RWB Integration Engine status yellow
BTW
this cal stay yellow and it does not mean that XI/PI will not work
Regards,
Michal Krawczyk
Edited by: Michal Krawczyk on Nov 29, 2008 1:11 PM

Messages versions integration engine in RWB

Hello,
i've testing in test system (in development system this don't occur).
When i raise a interface, only two version by messages have me in RWB:
adapter engine (status succeffull)
adapter engine (status succeffull)
and integration engine isn't
why?
Besides, in SXMB_MONI haven't any messages
idea?
thank

Is LOGGING and TRACE set properly in the Test System: /people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
If message display is proper in Dev and not in Test then the settings in Test system are not proper.
Is the output of the scenario coming as needed?
Regards,
Abhishek.

Regarding error in the INTEGRATION ENGINE URL

hai guys pls go thru this question carefully,.
when i click on INTEGRATION ENGINE and BUSINESS PROCESS ENGINE IN RWB ,integration engine is in yellow colour status instead of green colour and th result of SELF TEST IN RWB is: Is WEBSERVICE security available? what it mean how can i have my I.E in green colour status?
and the result of self test for BPE is : check the entries from HR control tables? what it mean?
as a result of above errors am not able to test the msg BY SPECIFYING THE url OF I.E and am getting error as:HTTP-404 -not found
hope u understand t he problem pls revert me back with suitable answers

hi
Check this
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Re: ERROR HTTP 404

Integration engine failure

hi..
in my RWB in component monitoring integration engine status is red.
how can i resolve that.
please help me this regard.
thanks and regads,
krushi

Hi..
refer this thread..
Integration Engine RED in Component Monitoring
In my Component monitoring i got this error for Adapter engine status.
Error: System not configured as Integration Engine
Might help you..
vasanth

Proxy Runtime errors in Integration Engines at RWB

Hi Experts,
We have configured the point to point configuration scenario in our landscape. I have two ABAP systems exchanges data using PI. I have configured both the ABAP systems as Application Systems and Corresponding Integration server as my PI system.
In RWB of PI I can see both these systems as proxy run time under Integration Engines, but are in error status.
Path to the same is Component Monitoring>Components>Integration Engines (here I can my systems as Proxy Runtime BSAB200, Proxy Runtime BSID200).
When run the test got the below error.
Can the SLD be reached? RFC destination LCRSAPRFC does not exist
Does the Integration Engine know the business system?
Are roles in SXMS_CONF_ITEMS and SLD consistent?
Why do we need to create the RFC destination again when we select the related integration server as PI.
Can any one throw some light whey are these errors are occured.
Thanks,
Chinna

Can the SLD be reached? RFC destination LCRSAPRFC does not exist
Reached to SLD but not to exchange profile.
Does the Integration Engine know the business system?
Yes.
Why do we need to create the RFC destination again when we select the related integration server as PI.
A central SLD scenario involves a central SLD, but not a central exchange profile.
The exchange profile used is always the one on the Integration Server the
application system connects to the exchange profile using the SM59 destination
LCRSAPRFC.
Regards
Pothana

RWB: System error in INtegration Engine, Adapter engine OK

HI All,
I have an interface converting IDOCS from R/3 into Text files and sending them to Legacy system via XI.
Data is flowing correctly, however I can see some errors in the RWB. (SXI_MONITOR is clean, no errors)
Upon investigation, I found that its has transmitted the file correctly, however this INtegration system error is shown.
To explain further:
BUssiness syst name of R/3 = BS_R/3
Bussiness syst name of legacy = BS_LEGACY
Bussiness service used = BS_SERV_R3
Message INterface = MIIA_R/3
So in RWB:
Message from BS_R3 to BS_LEGACY are SUCCSSFUL (Adapter and Integration engine , both success)
Message from BS_SERV_R3 to MIIA_R/3 (Adapter engine Sucess but INtegration engine = System Error)
Is it that the messages are going fine and the acknowledgements are failing or something like that.
Appreciate your guidance on same.
Many thanks
Shirin

Hi Shirin
I got a confusion understanding above
Scenario is IDOC R/3 -> PI -> Text Files -> PI -> Legacy system ?
if you have BS_SERV_R3 to MIIA_R/3 implemented for acknowledgments then definitely thats the error. But please share how you are getting ACK to understand and resolve error.
Thanks
Gaurav

Change status for 18 million messages in the Integration Engine

Hello there!
I have the following situation and I wonder that maybe you could help. Currently I have more than 18 million messages for the BC_XMB object in the Integration Engine for a BI System (connected to a PI system).
The problem here is that the archiving/deletion jobs in this BI system are faulty since maybe a couple of years ago and all of these messages are marked as "Archivable":
What I'm trying to do here is to change the status for these 18 million messages from "can be archived" to "to be deleted" since there is no way that I can archive this 18 million messages (filesystem capacity). I've been looking many option but I cannot figure out how to do it.
Maybe, if you know an alternative way to do this, I will be very pleased to hear it.
Thanks a lot in advance.
Carlos

Raghu.
I've done the following:
1. I've executed SE38 tx code.
2. I've entered the "RSXMB_DELETE_MESSAGES" report as "Program"
3. As the "RSXMB_DELETE_MESSAGES" report does not have a selection screen, it must be executed with default parameters. So, I selected "Program -> Execute -> Background".
4. There are no available variants, so I clicked on the "Execute immed." button.
5. The job starts. I can monitor it on the SM37 tx code.
6. It only deleted 20 messages.
What I get from this, is that the "RSXMB_DELETE_MESSAGES" report cannot delete the big part of the messages since them are marked as "Archivable" and not as "Archived".
what do you think of it??
regards
Carlos.

Log version status in Integration Engine

Hi,
When montioring in Integration engine, couple of my messages are in 'Log version' status. These messages are in this status for the past two days.
We are not able to cancel these messages also.
What is the workaround solution to these messages.
Thanks,
Swapna

It could be due to huge processing of message/data
Do a complete cache refresh and check the same
The solution in this thread points to XI BATCH.
Log version in sxmb_moni in recever system (soap to proxy scenario)
Edited by: Anusha Ramsiva on Aug 6, 2008 2:57 PM

RWB - Component Monitoring - Integration Engines = none ???

Hi.
I made a Business System in SLD.
Name: DEV_410
Role: Application System
Related Integration Server: XHD_100       (XI Server)
Technical System: DEV on dev60           (type: Web AS ABAP)
Client: 410 of DEV
Logical System Name: HMXDEV410
But I cant see the business system in RWB - Component Monitoring - Integration Engines. There shoud be 'Proxy Runtime DEV_410' in Integration Engines, I think.
Is there any wrong in SLD or RWB?
Thanks in advance.
sjyoon.

Hi
Go to SLD select your business system :DEV_410
And check the following entries for your business system
Role:   Application Server
Related Integration Server : (Check if this value correctly configured to your Integration Server client)
If this configuration is correct, this means XIRWBUSER is able to connect to the proxy runtime of application systems(DEV_410). Then there will be no entries displayed under RWB - Component Monitoring - Integration Engines in RWB.( that is how my RWB component monitoring is configured)
Only error entries are displayed under RWB - Component Monitoring - Integration Engines in RWB. Say for example XIRWBUSER is not able to connect to the proxy runtime of application systems(DEV_410). Then you see a entry in RED below your RWB - Component Monitoring - Integration Engines
Satish

Errors in Message Display tool in Integration engine in Message Moni in RWB

Hi,
We are facing issues with the Message Monitoring in RWB.
When we are selecting the Integration Engine and selecting the message and then clinking on details.
We are able to see 4 tabs :
1. Message Data
2. Message Content
3. Inbound Adapter
4. Queue Monitor
Is it right to display these 4 tabs for Integration engine ?
Where will be this setting ? What tabs shud be there ?
We are using XI 7.0 SP10.
When we are selecting the Adapter Engine in Message Monitoring then we are getting Page cannot be displayed.
Please provide your precious inputs to resolve this issue.
Thanks
Ramesh

Hi Krishna,
We have restarted the system but its not working.
Adapter engine is working fine without any issues.
Only the issues are unable to view the Message monitoring as it shud be.
In Message Monitoing => Integartion Engine => Message Selected =>Click Details=> Message Display tool => Message Data Tab is fine.
Message Content Tab => if we open we are getting the following error with SAP screen.
**************************SSO logon not possible; browser logon ticket cannot be accepted
Choose "Logon" to continue A dialog box appears in which you can enter your user and password
No switch to HTTPS occurred, so it is not secure to send a password ****************************
Please suggest us.
Thanks,
Ramesh

Message Monitoring Tool in RWB for Integration Engine Messages not working

Hi all
We currently work on a Pi 7.11 system. I f we start the runtime workbench and going to the message monitoring, we want to get in to a message in the integration engine. Normaly we should get the same sxi_monitor in the web browser, but we only get the soap envelope. The pipeline steps on the left side and also the payload cannot be seen.
We increased the rights of the user to sap_all but this did not changed anything. We also implemented the J2EE monitoring rule.
Seems to me as we forgot a setting after installation, but which??
Thanks in advance for your help.
Oliver

Hi Oliver,
I work on PI 7.0 and I know it's very different from 7.1x releases, but your problem sounds like a similar "problem" on 7.0.
Is your message sycronous? At PI 7.0 the default configuration is defined to remove the payload of sync messages. You can change it on JAVA Visual Administrator.
Try to find this parameter in Java Visual Administrator and set it to "false", below you will find the PI 7.0 path to this:
Server >> Services >> SAP XI AF Messaging >> messaging.syncMessageRemover.removeBody
I hope it helps,
Marcelo Vieira

Integration Engine does not connect with SLD

Hi all,
We have an XI 3.0 system that acts as QUA system in our track. This XI 3.0 system is connected to a central SLD installed on a PI 7.1 system that acts as our DEV system.
Everything seems to be OK in the Java part. We refresh the caches successfully and enter the SLD in DEV system.
We have a problem, though with the SXI_CACHE transaction. It shows the following message:
"Unable to refresh cache contents.Error during last attempt to refresh cache"
And the detail of the error is: "LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM"
We have checked in the SLD and the Business system is created.
In transaction SXMB_ADM when checking the Integration Engine connection with SLD we get the following error: "No access to system landscape at present"
In the Runtime Workbench of the system, when checking the Cache Connection, the Integration Engine part shows a warning. In the RWB also the Self Status Check of the Integration Engine gives errors:
"Are roles in SXMS_CONF_ITEMS and SLD consistent?"
We have already followed all the post installation guides, and the cache checks, and SLD checks guides.
Do you know which the soltion could be for our error??
Thanks!

Hi,
We have checkes
SM59: TCP/IP Destination: LCRSAPRFC y SAPLSDAPI. check the program ID is correct.--> connection test goes OK
HTTP destination: INTEGRATION_DIRECTORY_HMI: do a test connection: result=500--> connection test gives us 500 result
SLDAPICUST: Check the user and password and the server defined. the PI server should be the main server.--> checked, OK
SXMB_ADM>Integration Engine Configuration: Check if the destination is properly defined. should be dest://http://<server><port>/sap/xi/engine?type=entry> checked. OK
Check RZ70: wich configuration you have there?--> The configuration in the RZ70 for the SLD is pointing to the DEV system, so it is correct
SLDCHECK results:
"Properties of RFC destination SAPSLDAPI
RFC host:        %%RFCSERVER%%
program id:      SAPSLDAPI_XXX
gateway host:    XXXX
gateway service: XXXXX
Testing the RFC connection to the SLD java client...
RFC ping was successful
SLD server access settings:
host name:   XXXXX
port number: 50000
user       : XIAPPLUSER
Use transaction SLDAPICUST if you wish to maintain the SLD server access data
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call terminated sucessfully
List of business systems maintained in the SLD:
    (...more...)
Calling function LCR_GET_OWN_BUSINESS_SYSTEM
Retrieving data from the SLD server...
No corresponding business system found for system XXX      client 450
=> Check and maintain the SLD content for the current client
Summary: Connection to SLD works technically, but the SLD content may need maintenance
=> Check and maintain the SLD data content
*Unable to refresh cache contents.Error during last attempt to refresh cache" * this error is related with the RFC destination type HTTP. ( HTTP destination: INTEGRATION_DIRECTORY_HMI: do a test connection: result=500)

RWB Integration Engine status yellow

Similar Messages

Maybe you are looking for