RZ70 Abap to push data to SLD not working

Hi All,
Recently for one of the staging system we moved from physical server to VM. Instance number got changed from 01 to 00 - just to keep in sync with other SRM systems. (SAP SRM 7.0).
Now to push this data to SLD, RZ70 is not working. its spinning for unlimited duration.
Had a check on SLD_UC and SLDNUC, working fine.
SAPSLDAPI - working fine
SLDAPICUST and SLDCHECK - working fine
Job keeps running which I can see in SM37 and SM66, however for respective WP nothing is getting updated or no change when I check in SM50 specific WP - by double clicking in it. like Roll in, Roll out and memory details nothing is getting changed.
The program name is : _SLD_ASSOC
Any one has any idea, what more to try?
Found this link: however its unanswered : SAP_SLD_DATA_COLLECT getting hanged
Regards,
Haseena

Hello Gaurav,
We are higher version of SRM, so note cann't be applied.
SAP SRM 7.0
SAP_BASIS SAPKB70211
SRM_PLUS - SAPK-70106INSRMPLUS
SRM_SERVER - SAPK-70108INSRMSRV
SRM_EXPL - SAPK-70104INSRMEXPL
SRM_EXT - SAPK-70108INSRMEXT

Similar Messages

Date parameter does not work in SharePoint 2010 report using SQL 2008 Server Reporting Service

Here is the settings:
SharePoint 2010 with SQL server 2008 reporting services configured
When create a report for a SP list using SQL server report builder (3.0) the date parameter does not work.
The data parameter is set as "date and time" type and field name equals the col name in the SP list
When run the report, the whatever dates I select, the result is always the same, so the parameters do not take any effect.
Is any step missing?
Thanks for any advice !

Hi ,
How did you configure you "date and time" type parameter and field name equals the col name in the SP list?
Have you tested if other type parameter worked?
Have you tried typing the date format as 20140722 in your date parameter filed before run the report?
http://whitepages.unlimitedviz.com/2012/02/using-sharepoint-filters-with-reporting-services-parameters-for-personalized-reports/
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

Pie chart with two measures and date dimension navigation not working

Hi Experts,
Pie chart with two measures and date dimension navigation not working. Any help is appreciated.
Thanks
V

Hi Deepak,
I had time dimension in the RPD.
I have stacked bar chart with same time dim like year & month in the report. when I go to legand and set navigation it is working fine. But not with pie chart.
I am not not sure what is the problem. When I click on Pie chart it is not navigating to the target report. Can it be any other issues..???

Oracle date parameter query not working?

http://stackoverflow.com/questions/14539489/oracle-date-parameter-query-not-working
Trying to run the below query, but always fails even though the parameter values matches. I'm thinking there is a precision issue for :xRowVersion_prev parameter. I want too keep as much precision as possible.
Delete
from CONCURRENCYTESTITEMS
where ITEMID = :xItemId
and ROWVERSION = :xRowVersion_prev
The Oracle Rowversion is a TimestampLTZ and so is the oracle parameter type.
The same code & query works in Sql Server, but not Oracle.
Public Function CreateConnection() As IDbConnection
Dim sl As New SettingsLoader
Dim cs As String = sl.ObtainConnectionString
Dim cn As OracleConnection = New OracleConnection(cs)
cn.Open()
Return cn
End Function
Public Function CreateCommand(connection As IDbConnection) As IDbCommand
Dim cmd As OracleCommand = DirectCast(connection.CreateCommand, OracleCommand)
cmd.BindByName = True
Return cmd
End Function
<TestMethod()>
<TestCategory("Oracle")> _
Public Sub Test_POC_Delete()
Dim connection As IDbConnection = CreateConnection()
Dim rowver As DateTime = DateTime.Now
Dim id As Decimal
Using cmd As IDbCommand = CreateCommand(connection)
cmd.CommandText = "insert into CONCURRENCYTESTITEMS values(SEQ_CONCURRENCYTESTITEMS.nextval,'bla bla bla',:xRowVersion) returning ITEMID into :myOutputParameter"
Dim p As OracleParameter = New OracleParameter
p.Direction = ParameterDirection.ReturnValue
p.DbType = DbType.Decimal
p.ParameterName = "myOutputParameter"
cmd.Parameters.Add(p)
Dim v As OracleParameter = New OracleParameter
v.Direction = ParameterDirection.Input
v.OracleDbType = OracleDbType.TimeStampLTZ
v.ParameterName = "xRowVersion"
v.Value = rowver
cmd.Parameters.Add(v)
cmd.ExecuteNonQuery()
id = CType(p.Value, Decimal)
End Using
Using cmd As IDbCommand = m_DBTypesFactory.CreateCommand(connection)
cmd.CommandText = " Delete from CONCURRENCYTESTITEMS where ITEMID = :xItemId and ROWVERSION = :xRowVersion_prev"
Dim p As OracleParameter = New OracleParameter
p.Direction = ParameterDirection.Input
p.DbType = DbType.Decimal
p.ParameterName = "xItemId"
p.Value = id
cmd.Parameters.Add(p)
Dim v As OracleParameter = New OracleParameter
v.Direction = ParameterDirection.Input
v.OracleDbType = OracleDbType.TimeStampLTZ
v.ParameterName = "xRowVersion_prev"
v.Value = rowver
v.Precision = 6 '????
cmd.Parameters.Add(v)
Dim cnt As Integer = cmd.ExecuteNonQuery()
If cnt = 0 Then Assert.Fail() 'should delete
End Using
connection.Close()
End Sub
Schema:
-- ****** Object: Table SYSTEM.CONCURRENCYTESTITEMS Script Date: 1/26/2013 11:56:50 AM ******
CREATE TABLE "CONCURRENCYTESTITEMS" (
"ITEMID" NUMBER(19,0) NOT NULL,
"NOTES" NCHAR(200) NOT NULL,
"ROWVERSION" TIMESTAMP(6) WITH LOCAL TIME ZONE NOT NULL)
STORAGE (
NEXT 1048576 )
Sequence:
-- ****** Object: Sequence SYSTEM.SEQ_CONCURRENCYTESTITEMS Script Date: 1/26/2013 12:12:48 PM ******
CREATE SEQUENCE "SEQ_CONCURRENCYTESTITEMS"
START WITH 1
CACHE 20
MAXVALUE 9999999999999999999999999999

still not comming...
i have one table each entry is having only one fromdata and one todate only
i am running below in sql it is showing two rows. ok.
select t1.U_frmdate,t1.U_todate ,ISNULL(t2.firstName,'')+ ',' +ISNULL(t2.middleName ,'')+','+ISNULL(t2.lastName,'') AS NAME, T2.empID AS EMPID, T2.U_emp AS Empticket,t2.U_PFAcc,t0.U_pf
   from [@PR_PRCSAL1] t0 inner join [@PR_OPRCSAL] t1
   on t0.DocEntry = t1.DocEntry
   inner join ohem t2
   on t2.empID = t0.U_empid where t0.U_empid between '830' and '850' and t1.U_frmdate ='20160801' and t1.u_todate='20160830'
in commond promt
select t1.U_frmdate,t1.U_todate ,ISNULL(t2.firstName,'')+ ',' +ISNULL(t2.middleName ,'')+','+ISNULL(t2.lastName,'') AS NAME, T2.empID AS EMPID, T2.U_emp AS Empticket,t2.U_PFAcc,t0.U_pf
   from [@PR_PRCSAL1] t0 inner join [@PR_OPRCSAL] t1
   on t0.DocEntry = t1.DocEntry
   inner join ohem t2
   on t2.empID = t0.U_empid where t0.U_empid between {?FromEmid} and {?ToEmid} and t1.U_frmdate ={?FDate} and t1.u_todate={?TDate}
still not showing any results..

My international data roaming is not working in china, why?

I am currently traveling in mid-east china, but my data roaming is not working. it shows good single bar, but when I try to receive emails (from gmail or AOL account), it gives me error messages. it is very frustrating. it has been 3 days that I can't retrieve emails. I do have voice service though.

You might need to contact VZW for some trouble shooting help. Unless you are using a 3rd party simcard...then you might have to check with them to make sure their isn't an issue.

Use member on data form does not work

Hello,
"Use member on data" option does not work on composite Data Form. Business rule associated with composite form.
Who is resolve this problem?
Version hyperion: 11.1.2
Thanks

I don't have a solution for you but more steps to solve the problem
You are ultimately on the right track in some ways but break it down into it's components.
The problem could like in the business rule, the form connection, the variables, even the order of operations could all be in play.
So I would strip this baby down to its bare bones then build it back up.
1) Run the business rule. Each one separately and only after the previous ones is complete without variables and without touching the form
Is it successful: go to 2
If it isn't successful: trouble shoot the calc and or try running in EAS natively to see if that gives you ideas
2) Run the calc outside the form but with variables included. Did it prompt you correctly.
Is it successful: go to 3
If it isn't. What is wrong with the variable
3) Now attach it to the form but don't hide the prompts
Still good go to 4
4) hide the prompts and run on save
And if it fails on step four then it's not picking up the right variables in the prompt. And you need to look at why it wouldn't grab the right item.
This will isolate your problem for you and give you steps to fix it. Ultimately 99% of the time something did change in the structure for example that is impacting the calc. And when you isolate the problem this will reveal itself quite quickly.

I have iPhone 4 and I update it to iOS 7 and when I try to start the personal hotspot it crashed and for sometime my cellular data was also not working then allot a sudden the personal hotspot icon disappeared from my settings

I have iPhone 4 and I update it to iOS 7 and when I try to start the personal hotspot it crashed and for sometime my cellular data was also not working then allot a sudden the personal hotspot icon disappeared from my settings.
Has anyone faced a problem like this!!!

No. If you go Settings App > General > Reset > "Erase All Content and Settings", you will have the same iOS that was on the iPhone when you tapped the Erase button. If you believe your iPhone is Jailbroken, then this will not work. If you use iTunes on computer, this will put iPhone to current iOS which is iOS 7.0.2

Since last week my date & time have not worked on my 5c. The date & time are constantly wrong. I've shut down, doesn't work. Set it automatically, doesn't work. I don't get texts or calls when it's sleeping. Any suggestions?

Since last week my date & time have not worked on my 5c. The date & time are constantly wrong. I've shut down, doesn't work. Set it automatically, doesn't work. I don't get texts or calls when it's sleeping. Any suggestions?

try a reset.
Hold the home & power buttons down simultaneously until you see the Apple logo appear.
Note: no data will be lost.

Droid Razr Maxx HD Data & SMS does NOT work in South Korea

If you are going to South Korea this phone only operates as a "dumb phone" for phone calls ONLY. Data & SMS does not work at all. I contacted Global Support daily for one week with no resolution! I received conflicting information with 2 support folks telling me that the fix was to do a factory reset. So I reluctantly did this and it did not fix anything. It only wasted my time especially re-installing all my apps, etc. Then 4 support folks told me that you should never do this out of the country!! Anyway the last person i spoke to which was a network technician was very honest. He told me that I was "SOL" and he had no idea how to fix this problem. He said that he would have to get some teams together to try to fix the problem. And I was told that I would receive an email with an update. And of course I have not received any email of correspondence from Verizon. Very frustrating...

I found a solution. Okay so with the most recent update Verizon made the switch from sending text messages over their 1x network and moved them to their LTE (and possibly 3g) network, hence the reason they are sending so much faster. Today I was in a classroom that is underground and has terrible reception and noticed that I was getting delivery reports again but that my texts were sending slower, like they used to. I dug around in the phones programing menu and found a new option call "MO SMS over IMS" and it was enabled. Disabling it switches your texts back onto the old 1x network. So if you choose to make the switch, your delivery reports will come back but sending will go back to being a little slower. To get to this menu open up your dialer and type in ##7764726. Next hit send and when prompted with a password type in 000000 and hit verify. Scroll down to SMS/MMS settings and select it. Next scroll to the bottom, select "MO SMS over IMS", and disable it. Now your good delivery reports back!

Request Scope for portlets? Sharing data tutorial does not work for portlet

I created 2 identical applications, one that was a regular JSF web app, and one a JSR168 portlet. By following the "Sharing Data Between Two Pages" tutorial, I can get this technique to work without a problem in the web app, but the portlet (deployed locally using the pluto server) does not work. What is the difference between a regular app and a portlet app?
This shows that portlets apparently handle scope much differently than other applications, so any information relating to this would be helpful to pass along.

Portlet Life Cycle Differences
A portlet page is the same as a web application page in the Creator 2 application
model with differences only in the page life cycle. To best understand the life
cycle differences, you must first understand how a portal interacts with a portlet.
This interaction between portals and portlets is defined by the JSR-168 Portlet
specification. Typically a portal display in the web browser shows multiple
portlets. That is, when the portal page is displayed, there are actually multiple
portlets displaying or rendering their content. The job of the portal is to manage
how these portlets are displayed. Internally, the portal is responsible for telling
each portlet two things:
1. When to display itself
2. If there has been an action, such as a button press, performed inside that
portlet.
When a portal wants portlets to display their contents, the portal sends a render
request to each portlet showing in the portal. If one of the portlets showing in the
portal has a button tied to an action request, when that button is pushed, the
portal fires an action request for that portlet. In addition, the portal generates a
render request for the portlet and all other portlets on the page. You should note
that the portal implementation fires both action and render requests for each
action method on a portlet showing in the portal. The implication of this
interaction means the portlet page being rendered can not make assumptions
about the state of the values to be shown. Unlike a normal web application page,
a portlet page can't assume that the page being rendered in the Render Response
phase is the same page that was built in Restore View. If a portlet wants to
maintain state across repeated render requests, the portlet must use the session
bean to store stateful information.
The main point to remember is a portlet page must always be prepared to render
it's values from scratch or session data. This implies you should never bind
portlet page UI components to page bean properties or request bean properties.
Also, you should never rely on page bean instance variables that might be set
during an action event.
Hope this helps.

TS3899 Push email from AOL not working since IOS7.1 update?

As usual updated all idevices once notification received, only problem is my AOL email no longer pushes the data and I no longer receive notifications of new mail until it is "fetched" either by a timed fetch or by opening the mail app.
This applies to all my devices iPad Air, iPhone 5s and iPad mini.
Annoying!
Tried resetting the account and playing with the push and fetch settings, currently set to push with fetch set to 15 minutes.

AOL still not working, but reading the comments looks like the finger of blame is pointing towards AOL and probably just a coincedence it happened around the same time as the IOS7.1.1 update.
So far I have had to put up with cancelling the push option and relying upon a fetch scheduled for every 15mins. will have to see how that goes.
Anyone contacted AOL?

Date format is not working properly for Calender value help

Hi Experts,
We have two problems.
1. We want to change the format of date displayed. We want format of dd-MMM-yy. For that we have created one Simple
Type Dictionary Object with Displaying format dd-MMM-yy. It is working
fine for the non editable UI. But once I apply the dictionary type
object as data type for an input field, probem happens. Once the user
choose a date from calender value help the value in the input field is
coming like 01-011-12 not like 01-Jan-12.
The date format is not changing from the calender. But if we set the
display format of the dictionary object to MM-dd-yy or MM/dd/yy or
dd/MM/yy or dd-MM-yy the format conversion from calender to input field
is happening properly.
The only problem once we put MMM in place of MM for the input field
where user is selecting from a calender value help.
2. We want to restrict users from entering the value manually for date input field. The user
should be able only to enter value by selecting from calender value
help.
Please give suitable solution for these problems
Thanks
Shankha

Hi Sankha,
Please refer the links below:
http://scn.sap.com/thread/1659463
http://scn.sap.com/thread/1533443
Regards,
Manoj

Web service proxy and data control are not working properly

Hi,
I am working on jDeveloper 11.1.1.6
I have a SOA web service which requires 3 inputs and return with a set of data.
When I tried testing that web service in soapUI it is working perfect. But when I have created a web service proxy in my application and trying to test it from class (*******_ptClient) main method everytime it is replying with the output null
Also When I am requesting from the main method SOA is getting proper input (which I am providing in the main method) and SOA is returning proper output I have checked the SOA instance in em. So there is no problem in SOA side.
After that I have created web service data control and tested in that case also it is not showing any result.
What could be the problem ?
Please help.
Thanks
--NavinK

Hi Shay Shmeltzer,
Thanks for the reply.
I tried in HTTP Analyzer in JDeveloper and there also it is not working. My concern is :-
There are many other web services deployed on the same SOA server in same partition and they are working fine in HTTP analyzer and I am able to create and use the web service proxy as well. So as per my understanding there is nothing like network issues between SOA server and jDeveloper.
1 more thing When I am creating the proxy for this web service and requesting from the proxy's main method SOA is getting proper input (which I am providing in the main method) and SOA is returning proper output I have checked the SOA instance in em. So there is no problem in SOA side. The problem is jDeveloper is not able to get back that response which SOA is returning.
Please Help.
-- NavinK

Imail dates into ical - Not working well for me

I thought one of the new imail features in Lion was that you can click on a date in an email and it will create an event in ical. But every time Ive tried it, it doesnt seem to recognize the correct date. It recognizes the time but tries to put the ical event on todays date - not the date of the event...(whether it says something like tomorrow or the 17th --- and it's happened with emails Ive gotten from Apple addresses!)... So Im wondering how it's supposed to work? Because even when it tries to create an event, it gives me a chance to edit, but I dont seem to be able to edit the date...so its been useless. It gives me the ability to edit the name of the event but not the date.
Is this working smoothly for other people? Any suggestions?
The latest example was an email from an Apple employee that said "I can meet with you at 12pm on the 17th." or "will see you at the workshop at 11am"

I have a similar problem, except in my case when I click on "add to ical" nothing happens - nothing shows up in i cal. This function worked perfectly OK in Snow Leopard.

N95 8Gb USB Data Transfer Mode not working

I have a bizarre problem with USB Data transfer.
a) I upgraded to the new 15.x firmware with the correct HKCSL package - 0557980
b) I connected PC #1 in data transfer mode with no issue and copied a bunch of installers onto the mass memory and went on to install them - to the PHONE memory.
c) Later in the day, connected PC #2 and did the same with the last few applications.
d) Next day tried to connect PC #1 and it didn't work
e) Thought I must have an application using the MASS storage but checked and not so - all apps on Phone memory.
f) Went to PC #2 and tried - Data transfer mode works - no problem.
g) Tried PC #1 again, and still not working. I get all the right messages (Mass storage cannot be used at this time etc) on the handset, and I get the "safely remove hardware" option appearing on the PC - but I don't get a drive letter assigned in the Windows Explorer.
h) I have tried it on PC #3 and this works as well - no problem.
1. The working PC's both have PC Suite 2-Beta installed, while the problem PC has no PC suite at all.
2. I have downloaded the Nokia-connectivity_cable_driver_rel_6_85_10_0 and it installs properly - giving all the expected wireless... options in Device Manager, but I still don't get a drive letter assigned with the basic data transfer mode on this problem PC #1
So the issue seems to be with a PC that has never seen any version of PC suite, but it worked straight after the firmware upgrade.
All PC's are XP SP2.
Any suggestions on anything else to try ?
Regards

SOLVED by:
- attaching N95, selecting USB Data Transfer Mode
- Going to Device Manager
- Selecting the USB Mass Storage Device for N95
- "Uninstall"
- Remove cable when N95 says its safe to
- Re-attach cable
The PC then re-discovered and reloaded the drivers including the mass storage which then worked normally.
No idea what messed it up in the first place though.

RZ70 Abap to push data to SLD not working

Similar Messages

Maybe you are looking for