S_AHR_61016380 - Change master data

Hi Experts,
I have a query......In the standard report S_AHR_61016380 the report gives the data of employee whose master data have been changed and by whom it has been changed.
Now on double clicking the data it gives the indepth information as to who has changed the data / date/old value /new value etc...
Now my user says that they would be running the report every month which will be for all ees which is very difficult to see each line item individually...and even on generating the data into excel it does not refleft the data inside.
Kindly suggest how is that possible or what is the alternate solution for the same.
Regards,
Ritika

This report is  to double check the previous values and compare the current values and how exactly the payroll is effecting the master data.
But if the client wants to check every employee and monthly then they have to check individually.There is no other go
Best Regards,

Similar Messages

  • Change master data of business consolidation directly in the quality system

    Dear All,
    I need to change master data of business consolidation directly in the quality system.
    Anyone an idea?
    Kind regards,
    Marilia

    Welcome to SDN.
    There are SAP Notes 933024, 804057 and 592239 that provide a means of opening UCWB only for master data objects.
    Another possible work around is to make the updates in BW and use the synchronization programs UGMDSYNC and UGMDSY20. However for FS Items and Cons Groups all of the master data elements such as breakdown category and period of first consolidation are not available for entry in BW so for these characteristics the maintenance must still be completed in UCWB.
    Edited by: Dan Sullivan on Jan 4, 2011 10:59 PM

  • What are the effects of changing master data in bw

    hi gurus
    we have changed a plant (#1234) master data it was under comapany code(12) now it is under comapny code(59) on the r3 side, now there is data in the cubes already which was loaded before the change, and we still want to use it, but since master data has changed and reloded, what will happen when i run reports on the old data,
    secondly i know i can use time dependant objects but my question is what will happen if i dont use it. will the old data run fine under the new comapny code?  and what other things will this change effect.

    ok whats confusing me is that suppose we have this record in the cube
    Comp Code       Plant     kf
       16                   9823     45
    comp code & region is an attr of plant and this is the new master data
    plant     comp code  region
    9823        39              CA
    and this is old master data
    plant     comp code  region
    9823        16              TX
    now when the user tries to drill down by region on that transaction record what will he get for region

  • Macro Question: Possible to change master data?

    I have found a few macros that supposedly work to change the master data for infoobjects (MATLOC_SET()...etc.) however when lauching these in the planning book i can see no change in the infoobject master data.
    The idea is to change an attribute of an infoobject to remove the item from the selection within the planning book (i.e. change the planning type from A to B). The client wants this done directly from the planning book via a macro. Is this possible with the macro above or do I need to use a Bapi?
    Thanx!

    Thank you for the response!
    The macro that I am using is directly from the 9Aexamples template. When executing the macro it asks for the field name and the value to be entered, trying various field names we have seen no change in the master data.
    The reason for this is that we are working with a client that has thousands of products with various profiles. The client would like to have the capacity to execute a macro and remove the product out of the selection directly from the planning book. We thought this would be possible by changing the master data for the infoobject navagational attributes via a macro.
    Any additional help would be appreciated!  Thanx again!

  • Change Master data

    Hi every one
    a cube has a characteristic which has master data and long text, the master data and long text will be updated to characteristic when the data upload to the cube.
    My question:
    Can i delete all the master data of the characteristic, and then upload same data which has been deleted to the characteristic's master data? will it impacts the cube?

    U can only delete if the data is not used in any other object , if used u need to delete the data first and then u need to reload .
    normally u do re-inits if there is a change in the structure ,, but if it is in BI7 u can remodel witout deleting the object ...
    regards -
    Kumar Sarvepalli ,,,,,,,,,,, Honor points if helpful

  • Changing master data record while loading Transaction data

    Hello All,
    We have a requirementt to change one of the master data field(FLAG) while loading on the transaction data.
    we get the material info in the Master data. and in the sales order item data also we get the material.
    While loading the Transaction data, I have to set a FLAG field has "s" in the Master data material based on the Key selection:
    Master data -  MAterial = Tramsaction - Data Material.
    I have written the code.. and implemented.. i get the correct records but i face huge performance issue. can any one guide me please
        DATA: itab1 TYPE STANDARD TABLE OF /bi0/pmaterial,
               wa_itab1 TYPE /bi0/pmaterial,
               w_tabix TYPE sy-tabix.
         IF itab1 IS INITIAL.
           SELECT * FROM /bi0/pmaterialINTO TABLE itab1.
         ENDIF.
         LOOP AT result_package ASSIGNING <result_fields>.
           READ TABLE itab1 INTO wa_itab1 WITH KEY
                              material =  <result_fields>-material.
           IF sy-subrc = 0.
             w_tabix = sy-tabix.
             IF <result_fields>-/bic/paa1c2033 IS NOT INITIAL.
               wa_itab1-FLAG = 'S'.
               MODIFY itab1 FROM wa_itab1 INDEX w_tabix TRANSPORTING FLAG .
             ENDIF.
           ENDIF.
         ENDLOOP.
         IF itab1 IS NOT INITIAL.
           MODIFY /bi0/pmaterial FROM TABLE itab1.
         ENDIF.

    Here are some performance tips:
    Add FOR ALL ENTRIES IN result_package WHERE material = result_package-material to your select statement
    After your select statement, add IF SY-SUBRC = 0.  SORT itab1 BY material. ENDIF.
    In your read statement, add BINARY SEARCH to the end of it
    At the end of your end routine, make sure to CLEAR itab1.
    You can also increase the number of parallel processes for your DTP, and DSO activation (assuming your target is DSO).

  • Changing Master data table keys

    Hello,
    I have a custom extractor (built by someone else)on R/3 that gets data from table HRP1001.  This extractor contains data I need to implement "job relationships" for HR in BW. 
    I am trying to extract the data into a master data object on BW.  One job in the HRP1001 table (OBJID on R/3) can have multiple relationships (or object types, OTYPE on R/3).   However, since the key of the master data for 0JOB is just JOB, OBJVERS, and DATETO (and does not include OTYPE), the load fails due to duplicate records. 
    Since to modify the master data table for 0JOB would be an SAP mod, I created my own "Z" object from 0JOB.  I have been manipulating the /BIC/M, /BIC/P and BIC/Q tables to try to adjust the key to include at least the OTYPE.  I can successfully change the key of the Z object's master data to appear as I want it, but the new objects I added as keys are "flagged" after the load fails due to duplicate records.  (Checks of each /BIC table are okay and activated changes.  Also performed SE14 adjustment of each table)
    So my questions are 1) does anyone know of a business content item that for storing this type of data that I have missed?  and 2) If not, can anyone recommend how I can correctly modify the key fields of a master data object?
    Any assistance is greatly appreciated.
    Thank you,
    Kelley

    Hello Kelley,
    If you want to enhance the key of your master data table, include the infoobject in compounding. All the infoobjects included in compounding will be included in the key of master data table.
    Hope it helps.
    Regards,
    Praveen

  • Can i change master data at transaction level

    hi,
    i have created 2 STO customers in which the shipping conditions is same that is 01-standard.
    i have configured 02 - by road.
    here the problem is i have created purchase order and in that shipping tab page its showing as 01 which is taken from master data of receiving plant.
    i have changed and saved it has taken the value 02.
    then - delivery it is showing 02.
    then in billing its not showing the shipping conditions 02 which we have taken while creation of purchase order it has taken the condition record which has 01 combination.
    then i created condition record and repeated the process again......but there is no change
    in billing its not showing the shipping conditions 02 which we have taken while creation of purchase order it has taken the condition record which has 01 combination.
    regards,
    balajit

    Dear Balaji..
    The highest precedence is given by the system to the shipping condition that is maintained in the sales doc type (VOV8 transaction).
    For this, go to the customization of your delivery document type ( NL / NLCC) in the transaction 0VLK. check out the doc type maintained in the field 'default ord. ty.'. Then for this document type in VOV8, maintain the required shipping conditions. This will always have the highest preference.
    Regards,
    Anil Kumar

  • Change master data setting - Vendor reconciliation account

    Is it possible to change the configuration of a G/L account currently setup as a vendor reconciliation account (that has a balance) to a regular a balance sheet sheet account?
    If yes, what actions do I need to do?
    Are there any risks in doing this?
    Can I perform a similiar change for a G/L account currently setup as a regular balance sheet account that I instead want to use as a vendor reconciliation account?
    Thank you in advance!
    Best regards Susan

    Hello,
    Answers to your questions:
    Question:
    It is possible to change a reconciliation account into a balance sheet account but the current items in the reconciliation account should be manually moved to another account
    Answer:
    If there is a single line item posted(whether the balance is zero or not), it WILL NOT allow you change the reconciliation account in the GL master record.
    Question:
    -New postings will however be posted to the new reconciliation account set up in the vendor master
    Answer:
    If you want to update a new reconciliation in vendor master, then create a fresh GL Account as reconciliation type for Vendor and update the vendor master with new GL Reconciliation Account. When you have done the new postings, new entries will flow to new Reconciliation Account, but the old entries will remain be there in the old reconciliation GL Account. To move the old reconciliation entries to new reconciliation entries executed F.5D (Balance Sheet Adjustment). Please read the documentation available on transaction code F.5D
    Question:
    -What inconsistency in data are you referring to below? - No Inconsistency
    -What reports would these differences appear in? - No differences
    -Is there any risk of making a balance sheet account into a vendor reconciliation account (when baalnces exist)? - Vendor Reconciliation Account is a Balance Sheet Account only. This is a liability account in your Trail Balance.
    Hope this clarifies your doubts.
    Regards,
    Ravi

  • Transfer or change master data

    for fixed asset, if it is already acquired and depreciated, can we use ABUMN to move to different cost center, after we do transfer, is cost center in asset master automatically be changed to new cost center? do we still need as02 to change cost center? if needed, should we do AS02 first or should we do ABUMN first?
    if we use ABUMN and transfer to another cost center on next month 10th, how asset depreciation is calculated compared with
    old cost center, is it same value? instead of using ABUMN, if we use AS02, would the asset depreciation same value? I can't change cost center untill next month 9th or 10th.
    if my asset with old cost center don't haven't done any acquision. do we have to use as02 to change cost center? for some assets we use real io to settle to fixed assets, if we want to change cost center, do we simply change IO settlement rule to new cost center, no need to change asset master using as02?

    You can create a new asset with new cost center in AS01 and then can transfer the old asset to this new asset using ABUMN.
    In case you change the cost center in the old asset itself using AS02, the the depreciation amount will be same but will be posted to the new cost center. The old depreciation will still remain in the old cost center.
    Regards,
    SDNer

  • Change master data attribute impact analysis

    Hi All,
    I have an IO and I need to enhance it by adding few more attributes to it from new DataSource .
    This IO is being used in many cubes and DSOs, What I want to know if these cubes and DSOs will also become inactive and their corresponding transformation and DTP as well?
    Thanks in Advance
    Kind Regards,
    NR

    Hi
    It will not effect. just add the new info objects to your main info object and activate it.
    transport it further systems. once you load the data if you have any aggregates using this info object then run the ACR using program RSDDS_AGGREGATES_MAINTAIN
    Regards,
    Venkatesh

  • Change in Sales Order/Service Order is updating customer master data

    Hello Experts,
    Here is the change happening in CUSTOMER MASTER RECORD for very few number of cases. This we are not able to replicate, since not able to find out, in which cases it is happening.
    Scenario:
    When the user tries to change address in customer screen (For eg., NAME2,NAME3 ,NAME4 etc.) of change transactions (VA02 OR IW32), the same change is being reflected or updated in the customer master record.
    Note : We tried again doing the change(For the already changed order) in change transactions (VA02 OR IW32) and found that the change was not updating customer master, this time.
    Hence, not able to replicate. Kindly suggest.
    Resolvable suggestion would be highly appreciable.
    Regards
    Mahesh

    I never heard of this before. Per standard, only when customer master address is changed (master data), the changes will reflect in the documents (transactional data). Your scenario reflects the other way round. Hence you may need to debug the program SAPMV45A and see any enhancement is causing this.
    Regards,

  • Change pointer for Master data

    Hello Experts :
      If I Configure and Activate Change pointer ,so will it record  only existing change or it will update new entry also
    Example : Did changes in vendor master payment terms (I know change pointer will work for this).
                     But if I create any new vendor in system 1 will change pointer will record this change and going to update system 2 and will create this vendor in system 2  ?

    the graphic in the docu cleary says create/change master data will create change pointers:
    http://help.sap.com/saphelp_nw04/helpdata/en/0b/2a61bd507d11d18ee90000e8366fc2/content.htm

  • Abt master data activation and attribute change run

    There is any difference between master data activation and attribute change run

    Hi,
    Master data activation is activating the master data once you extract the data from source system the data will be in inactive state, so in order to make the data available we will activate the master data.
    Attribute change run :Its used to update the newly changed master data records to the Hierachies and aggregates.
    If you are already using the available master data in aggregates in InfoCubes, you cannot activate the master data individually. In this case we will use attribute change run.
    For attribute change run we have direct tcode: RSATTR or  In the main menu, choose the path Tools Hierarchy/Attribute Change.
    regards
    KP

  • Force read/refresh of master data attributes on query

    Hi there,
    We're having troubles with one input ready query that changes and attribute value (KYF) of one characteristic. That works fines and whe can save changed data on the infoprovider via DTP. Problem is when data is saved we need to refresh query as whe have both values on screen (original value as char attribute on rows) new value as input ready KYF, so after save we would like to see that both values are the same.
    Is there any way of force query no to read from caché as whe are changing master data attributes. I read something about IF_RSMD_RS_ACCESS class that can be implemented on Master Data access and force it there but sounds really hard so if this is the way can some of you guys give us some help.
    I hope I make myself clear on the explanation...
    Thanks in advance,
    Regards
    Carlos

    Dear All,
    The recent days that I tried working on changing master data attributes through BPS didn't work out.The Primary reasons was  that some of the attributes that I needed to change were not present in the transaction or planning cubes and the characteristics that are not part of your cube on which the planning area is based then you can not do changes on them.
    This is my undestanding .Please correct me if I am wrong.
    Besides , I was also thinking if we can do the same through portal.i.e retriving the master data infoobject ( based on the value seleceted for that infoobject by the user  )  and its attributes in the portal , edit them and save them back so that the updated values goes back to BW master data infoobject data base tables and updates the value.
    Eg . I have Natural Account master data infoobject in the BW with attributes fucntional area and expense center.Based on the user selection of any values for the Natural account lets say  01110 , then for 01110 natural account the portal should display the correspoding attributes values of fucntional area and expense center.Lets take this values as 10 , 20 respectively for fucntional area and expense center . What I want to do now is to change these attrbute values to 30 and 40  and I would like to save it back as the changed attribute values for that natural account for 01110 with new attribute values 30 & 40 respectively for fucntional area and expense center .
    Is this possible through portal and BW?
    Any idea on this would be appriciated.
    Regards,
    Ankit
    Edited by: Ankit Bhandari on Nov 21, 2008 12:21 PM
    Edited by: Ankit Bhandari on Nov 21, 2008 12:32 PM

Maybe you are looking for