S_ALR_87012360 : Transfer postings for diferred taxes

Hi,
When i run Tcode S_ALR_87012360 The taxe of some postings is not transfered, the system shows this error :
Code error 2
The document contains items whose posting key is marked as payment
Please can you explain me the signification of this message and how to solve it ?
Regards
Edited by: jehade el aoumari on Oct 27, 2008 8:22 AM
Edited by: jehade el aoumari on Oct 27, 2008 10:33 AM

Hi,
It is not so, you can run this report any number of time.
You might have missed to input any field. Kindly check that batch generated or not.
What error you are getting, kindly let us know.
Regards,
Shayam

Similar Messages

  • Transfer posting for diferred taxes

    Hellow,
    When i execut the transaction S_alr_87012360 i have a table in the down with documents wich tax is not transferred, and i have these error codes :
    2.The document contains items whose posting key is marked as payment
    6.Tax account was posted to manually.
    please help me to correct these errors, how to do?
    regards
    jehade

    Hi,
    check this link
    Its not possible with 301 mvmt type
    [http://help.sap.com/saphelp_470/helpdata/en/4d/2b90dc43ad11d189410000e829fbbd/content.htm]
    Thanks
    Suresh

  • RFUMSV25 - deferred tax- error FR472 - No target maintained for the tax on

    Hi gurus!
    When I run RFUMSV25 for Transfer postings for deferred tax I get this error:
    Message no. FR472
    No target maintained for the tax on sales/purchases code selected
    I have trouble solving this, cause this error doesn't occure in our testing enviroment but only in production.
    Thanks!
    Marina

    Hi Marina,
    As you might be knowing, the report RFUMSV25 is run for transfer posting from the main tax code to a deferred tax code. As the name suggests, you have to maintain a target tax code for each main tax code.
    Hence, in tcode FTXP, create a deferred tax code. Say for V1 you can maintain a deferred tax code X1.
    Then go the main tax code, say in our example V1
    Click on the properties tab, and assign the deferred tax code X1 in the 'Target tax code' field.
    Regards,
    Mike

  • RESERVATION QUANTITY SHOULD NOT BE CONSIDERED FOR TRANSFER POSTINGS

    Dear Gurus,
    Reservation Quantity should not be considered for Stock Transfers or Transfer postings to Sub contractor.
    movement type : 541 & 641
    Example :  Total Stock = 1200 nos.        Reserved stock for production order = 1000 nos.
    Currently our system allows stock transfers/transfer postings for reserved quantity also.
    But we want the reserved quantity to be blocked and only free stock should be allowed for transfer postings.
    (i.e  1200 - 1000 = 200 nos  .     Only 200 nos should be allowed for transfer postings)
    Please suggest.

    as per standard SAP reservation quantity will not stop the goods issue. resevation has no control on stock issue.
    Try with abap development.

  • Document splitting error for deferred tax transfer document

    Hello,
    We are into ECC 6.00 and we have activated the new gl concept and profit center is a mandatroy for any transaction.
    Now we are implementing Deferred tax functionality to our client and We are performing UAT for the same.When I am performing customer invoice with multiple cost assignments with deferred tax code system is posting the invoice and same I cleared with payment,while running the deferred tax program(RFUMSV50) system genarating batch input session instead of posting the transfer document.
    I am trying to running the batch input session through transaction code SM35 and It's giving error of enter profit center in line item 001.
    reason is VAT output account is not splitting different profit centers in invoice.
    We can created default profit center for deferred tax account but our client requirement is system has to pick the profit center from Invoice.
    Could you some body help me how can I resolve this issue.
    Please help me for resolving this issue.
    Thanks in advance.
    Regards,
    Satya

    Hi,
    We have checked with SAP and it's standard functionality of defferred tax program and it will not split the profit center.
    Presently we are processing such type of invoices manually transfering deferred tax account to VAT output account.
    Regards,
    Satya

  • Material Ledger for Stock Transfer Postings

    Hi All,
    I have a question about the way material ledger is calculated for stock transfer postings (movement type 641). I will give an example to illustrate this issue:
    Material A has a Standard cost of $10
    Material B has a Standard cost of $8
    During the month 100 units were transferred from material A to Material B. This created a financial posting as follows:
    Credit Material A -          $1000                               
    Debit Material B -           $800
    Debit Price Difference    $200
    This price difference of $200 was used in the calculation of Actual cost for material B
    However, the Actual Cost for Material A was $9. I would have expected the system to use this actual cost to calculate the difference to be posted to material B. Hence the difference used in Material B should have been $100 {(9 – 8) X 100} and not $200.
    Has anyone had a similar issue, or know how the system resolves this (if at all)?
    Points will be rewarded for relevance.
    Thanks

    Dave, I see that your process is slightly different to mine. We do not revalue inventory at month end, instead the material ledger program posts the revalued amount to a reserve account and the actual cost is only a statistical entry. The material ledger calculation is reversed automatically in the new month and the standard price is used for valuation.
    I think this might make it difficult for the system to value STO's at actual. I may need to check with SAP.
    Thanks

  • RESERVED QUANTITY'S SHOULD NOT BE CONSIDERED FOR TRANSFER POSTINGS

    Dear Gurus,
    Reserved quantity's should not be considered for Transfer postings to subcontractor or Stock transfers.
    Example:  Material  XYZ    Total Stock =  1200 nos.

    as per standard SAP reservation quantity will not stop the goods issue. resevation has no control on stock issue.
    Try with abap development.

  • Defining Accounts for Automatic Tax Payable Transfer Posting

    Dear all,
    I would like to know about accouting process of Accounts for Automatic Tax Payable Transfer Posting.
    Please give me a detail example about business that use this account
    Thanks so much
    Minhtb

    Hello,
    This scenario applies at month end.
    Say during the month you have posted payables are receivables resulting in the following balances on your tax accounts:
    Input tax account: 10.000 Dr
    Outpux tax account 12.500 Cr
    When you prepare your tax return at month end with report "Sales Purchases tax returns", it will print out all if your input and output tax transactions, detailing the total balances mentioned above.
    At the same time you can activate the tax payable posting option with help of the variant options. Besides the printout, SAP will then also automatically post the following document:
    Dr Output tax account 12.500
    Cr Input tax account 10.000
    Cr Tax payable account 2.500
    in other words, the input/output tax accounts are zero and the remaining (payable) balance is offet to a special clearing account, the "tax payable account". This account is then cleared against cash as part of e.g. bank processing when the payment is made and that ends the process.
    hope this clarifies, please do not forget to assign POINTS if this answers your question.
    Thanks
    Rene

  • Auto TO for transfer postings

    Hello,
    Could any one suggest how to create auto TO and TO confirmation for transfer postings.
    regards
    rk

    check at this node
    SPRO: Logistics Execution > Warehouse mangement > Activities > Transfers > Set  Up Atom. TO creation
    and check at this node also
    SPRO: Logistic Execution > Warehouse  Management > Interfaces > Inventory management > Activate Auto TO creation

  • How To Clearing GL Account Open  Items for Prepaid Tax

    Dear All,
    I have a problem to do cleaaring Open GL GL Aaccount items for Prepaid Tax.
    I'am using currency USD for transaction. I did a clearing with Tcode F-03. By the time the error appears Simulate "The Difference is too large"
    What should I do to GL Accounts can be in clearing and total 0?
    Kkindly Help,
    Urgent
    Thank you

    Hi,
    There are two reason to get the above error message:
    1. If Debit and Credit balances are not zero, you will get the above error message.
    (It means that,if you are clearing with company code currency i.e. (without providing currency) via F-03 transaction code)
    Solution: You have to choose Partial clearing/Residual clearing to transfer the difference (debit and credit amount) amount.
    2. If Debit and Credit Balances are Zero.
    (It means that, if you are clearing with non-company code currency ((with providing currency) via F-03 transaction code)
    Solution: It goes to Exchange difference GL code automatically, if not you have to configure in the OB09 transaction code.
    Ravi Polampalli

  • Activate Open Item Management for a tax GL account

    Hi experts
    I have tried different options and explored forums but haven't been able to find the solution as yet.
    I have some tax GL accounts (Tax Category field in their GL master is < or > i.e. Input or Output Tax Account). There have been postings to these accounts but these accounts are not open item managed. To perform clearing for these accounts, I need to activate OIM for which I'm trying FAGL_ACTIVATE_OP but the system gives me error"
    "Not possible to determine tax indicator in company code xxxx
    Company code xxxx is not considered for the activation"
    When I further drilldown the error, i find the following information:
    Diagnosis
    Postings to the selected account require a tax code. On the basis of the company code data (T001), the system tried to determine a tax code for zero tax. However, there is no such tax code stored for the company code.
    Procedure
    Specify the tax code for zero tax in the company code. You do this in Customizing for Financial Accounting Global Settings (New) under Assign Tax Codes for Non-Taxable Transactions.
    I have checked settings in OBCL for Non-Taxable Transactions and found that I0 and O0 are maintained for Input and Output tax (also tax jurisdiction). In Table T001 I also find these entries so these seem to be complete.
    Can somebody please help me sorting out this issue.
    Many thanks!
    Moazzam

    Hi,
    Some G/L accounts cannot be managed on an open item basis,
    specially G/L accounts that are used in account determination for
    automatic transactions (ie: accounts set up as bank accounts, Tax
    accounts, raw material accounts, reconciliation accounts, profit and
    loss accounts).
    It is the standard design of the FAGL_ACTIVATE_OP that there is no
    conversion of a tax account to open item management.
    Processes as the posting of the sales/purchases tax payable do not
    process any clearing transactions therefore the open item management is
    not necessary. Clearings must really never be posted to an input VAT or
    output vat tax account, otherwise it would prevent subsequent processes
    on the actual open items (Customer or vendor). The only tax account on
    which the open item management should be possible is the G/L account of
    the deferred tax.
    Hope my information was helpful for you.
    Regards,
    Cristiano

  • Planning Strategies 10 and 40 with Stock Transfer Orders for consuming PIRs

    Hello,
    I have the following situation in a Client:
    One Production Plant (1000)
    There exist various Plants  to sell products.
    The production Plan (PIRs) I create in Plant 1000 (MD61). Monthly buckets.
    The planiing strategy I want to use is 40  or maybe 10 (both to Stock).
    Consumption of the materials in plant 1000 is via:
    1. Stock transfer orders to other plants (with Shipping funcionality)   (about 80% of the shipping form plant 1000)
    2. Sales Ordes with shipping   (10%)
    3. Transfer postings from one plant to another (303 - 305 movement type) (10%)
    How can I make sure that all these outgoing movements from plant 1000 do consume my forecast? Is this standard funcionality.
    Thanks for any reply,
    Aart

    Hello Mario,
    Thanks for your answer. I looked at the note but Im not sure it does apply in our situation.
    Let me explain our situation maybe more clearly:
    I want to create a monthly Forecast (MD61) with PIRs for Production Plant 1000. (Planining strategy 10)
    The stock created in plant 1000, on the basis of this forecast is consumed during the month by:
    1. Stock Transfer Orders (from plant 1000 to plant X) - (for 95%)
    2. Sales orders (directly) (5%)
    The STOs should not be on top of the PIR but should be part of the PIR.
    For your information, the stock which is moved from plant 1000 to plant X via STOs, is sold at plant X (not directly at plant 1000).
    this stock sold monthly at plant X however, is considered withing the forecast!
    I hope this clarifies  our situation a bit more.
    Thanks for any anwer,
    Bye
    Aart

  • Inspection lot on transfer postings

    Hi colleagues,
    I would like to know your opinion about a problem that I don't know how to solve.
    Is it possible to create an automatic inspection lot on transfer postings between different storage locations?
    By the moment, we're creating the automatic inspection lots when we do the goods receipt from the purchase order. For this purpose we're working with Inspection type 01 on the material master (quality management view). Due to a special requirement we are not going to create the inspection lot on the goods receipt but when the goods are transferred to another stroage location.
    I've changed the Inspection type on the material master from 01 to 08 - Stock transfer inspection, but nothing happens (no inspection lot created) when a transfer posting with 311 movement type is done.
    Thanks very much in advance and good luck,
    J

    Hi
    Precisly 08 inpsection type has been defined for the same.
    I presume that you are doing stock posting through MB1B/MIGO t code & 311 mvt type
    Now if you have activated 08 inspection type it will create a Stock relevent Inspection lot with 08,whenever you are transfering material from one storage location to other.
    Check the following setting
    Qcc0->Quality Inspection->Inspection lot creation>Inspection for goods mvt->Deactivate Quality Inspection for a Movement Type--> check here whether for 311 QM mvt is deactivated here
    I hope this will add some value
    Regards
    Sujit

  • Material to material transfer postings within QI

    We have a requirement to perform material-to-material transfers within the QI stock type (e.g., 323, but with receiving material open). I don't see any movement type for this. Is there any reason why this should not be allowed?

    Hi
    For some reason I woke up this morning with the answer to this problem and I have tested it and it works.
    I made a copy of movement types 323 and 325 which are sloc to sloc transfers for stock on 'Q' or 'S' which is quality or blocked.
    I made these new movement typpes 923 and 925.
    I them went in to the individual movement types in omjj and in the section ' Foeld selection (from 201) Batch search procedure click on the magnifying glass and you will see a list of headings. In the one called Transfer Postings double click and then make the receiving material either optional or required as it is suppressed at the moment. Then when you do either MIGO or MB1B with these movement types not only will they select either Q or blocked stock depending on the  movement type but the receiving material number is available for populating
    hey presto problem solved, I feel that I am quite sad waking up with answers to SAP issues but hey ho such is the life of a consultant.
    Final point make sure that Finance are happy as there will be a change in valuation of stock.
    Cheers

  • Error in Payroll- Negative transfer amount for infotype

    Hi,
    I am running payroll in the monht of May , i have included a new payment in April, when i run the Payroll in May of may, iam getting the following error, how to solve this.
    Income Tax Bank Transfer               
    --5  IF         O              If Original?                           
    --5  INBTX INBT GEN  NOAB IN01 Transfer Wage Type /470                
    --4  Input              
    --5  Processing           U
    Read Bank Details for Income Tax                                         
    Personnel Calculation Rule  INBT                                         
    --U  Negative transfer amount for infotype                                     
    Rgds,
    Sekar.

    HI Surabhi,
    Last month run was Live, But it was not posted, would there be any issue bcoz of that.
    Rgds,
    Sekar.

Maybe you are looking for