S10-3 wirless driver on xp is not working

hi
i just bought lenovo s10-3 idea pad with window 7 started already preinstalled on it , but i decided to install windows xp instead
well i could install all the drivers that need but i couldnt find the wirless driver
i tryed hard via google and so the lenovo driversite itself , but i didnt success
can anyone help me out plz
thx in advance
Solved!
Go to Solution.

atheros, broadcom : http://consumersupport.lenovo.com/uk/en/DriversDownloads/drivers_show_2683.html
intel : http://consumersupport.lenovo.com/uk/en/DriversDownloads/drivers_show_2682.html
( for xp )

Similar Messages

I cannot seem to load raw images into LR 2.5. I've been using this for years. I always load from memory card, but it gives me an unknown error message. I tried to load from camera, hard drive, & external drive and still will not work. I checked import

I cannot seem to load raw images into LR 2.5. I've been using this for years. I always load from memory card, but it gives me an unknown error message. I tried to load from camera, hard drive, & external drive and still will not work. I checked import menu and nothing has changed. I loaded the photos onto my tablet and images are fine, so do not feel it is the memory card. Any thoughts?

The error message probably said "unsupported or damaged"
The T3 requires Lightroom 3.4.1 or later. You can either upgrade to a more current version of Lightroom (version 5.6 is the most recent) or you can use the free Adobe DNG Converter to convert the RAWs to DNG, which should import into Lightroom properly.

Ethernet driver for WXP is not working on Satellite A100

Satellite A100-784 PSAANE-02L011G3 ethernet driver for wxp is not working. Can not properly install driver, downloaded all possible drivers and still not working.
In device manager yellow sign. I have bought my laptop with Vista BASIC and I put XP-SP2. Country is Croatia! Help me please!

Hi
I cannot believe that you are not able to install the LAN driver on this A100 Satellite!
However, the Sat A100-784 supports an Intel 82562GZ 10/100 Mbit (Ekron) Lan chip.
If you want you can download and install the Lan driver from the Intel page:
http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=999&lang=eng
There you will find the drivers for the Intel 8256x Ethernet Controllers
Bye

Installed new hard drive, mail re-install not working properly...

Hi - I replaced the hard drive in my laptop. Before doing that, I backed up my mail folder and my mail preferences folder to a DVD. Now, after installing OSX on the new hard drive, I've copied the file / folder onto the new drive, but mail isn't working properly. It keeps giving me the "welcome" screen instead of just starting up. It wants me to put in my email addresses, etc. Seems like there's a switch somewhere in the OS that tells it this is the first time its been run. If I go through the process, it still doesn't get my preferences right.
Anyone know what I'm doing wrong?
The files / folders I'm copying are:
- Home > Library > Mail
- Home > Library > Preferences > com.apple.mail.plist
thanks,
dave

Problem was not with mail but with Toast and the DVD I burned using it - arggh.

[SOLVED] Laptop SATA drive on desktop computer not working

Hey guys,
My acer laptop crashed few days ago and I'm trying to recover the data off its SATA harddisk on my gf's desktop computer. I don't know why, but I get a lot of errors at startup.
dmesg:
Adding 2024180k swap on /dev/sda3. Priority:-1 extents:1 across:2024180k
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata5.00: BMDMA stat 0x25
ata5.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
res 51/04:20:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
ata5.00: status: { DRDY ERR }
ata5.00: error: { ABRT }
ata5.00: configured for UDMA/133
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata5.00: BMDMA stat 0x25
ata5.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
res 51/04:20:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
ata5.00: status: { DRDY ERR }
ata5.00: error: { ABRT }
ata5.00: configured for UDMA/133
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata5.00: BMDMA stat 0x25
ata5.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
res 51/04:20:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
ata5.00: status: { DRDY ERR }
ata5.00: error: { ABRT }
ata5.00: configured for UDMA/133
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata5.00: BMDMA stat 0x25
ata5.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
res 51/04:20:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
ata5.00: status: { DRDY ERR }
ata5.00: error: { ABRT }
ata5.00: configured for UDMA/133
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata5.00: BMDMA stat 0x25
ata5.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
res 51/04:20:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
ata5.00: status: { DRDY ERR }
ata5.00: error: { ABRT }
ata5.00: configured for UDMA/133
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata5.00: BMDMA stat 0x25
ata5.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in
res 51/04:20:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
ata5.00: status: { DRDY ERR }
ata5.00: error: { ABRT }
ata5.00: configured for UDMA/133
sd 4:0:0:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
sd 4:0:0:0: [sdb] Sense Key : 0xb [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 4:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sdb, sector 0
__ratelimit: 6 callbacks suppressed
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 1
Buffer I/O error on device sdb, logical block 2
Buffer I/O error on device sdb, logical block 3
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata5.00: BMDMA stat 0x25
ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/04:08:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
ata5.00: status: { DRDY ERR }
ata5.00: error: { ABRT }
ata5.00: configured for UDMA/133
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata5.00: BMDMA stat 0x25
ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/04:08:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
ata5.00: status: { DRDY ERR }
ata5.00: error: { ABRT }
ata5.00: configured for UDMA/133
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata5.00: BMDMA stat 0x25
ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/04:08:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
ata5.00: status: { DRDY ERR }
ata5.00: error: { ABRT }
ata5.00: configured for UDMA/133
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata5.00: BMDMA stat 0x25
ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/04:08:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
ata5.00: status: { DRDY ERR }
ata5.00: error: { ABRT }
ata5.00: configured for UDMA/133
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata5.00: BMDMA stat 0x25
ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/04:08:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
ata5.00: status: { DRDY ERR }
ata5.00: error: { ABRT }
ata5.00: configured for UDMA/133
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata5.00: BMDMA stat 0x25
ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/04:08:00:00:00/04:00:00:00:00/e0 Emask 0x1 (device error)
ata5.00: status: { DRDY ERR }
ata5.00: error: { ABRT }
ata5.00: configured for UDMA/133
sd 4:0:0:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
sd 4:0:0:0: [sdb] Sense Key : 0xb [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 4:0:0:0: [sdb] ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
ata5: EH complete
I get the following output with hdparm:
$ sudo hdparm -I /dev/sdb
/dev/sdb:
ATA device, with non-removable media
Model Number: WDC WD2500BEVS-22UST0
Serial Number: WD-WXE507A05038
Firmware Revision: 01.01A01
Standards:
Supported: 8 7 6 5
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 488397168
Logical/Physical Sector size: 512 bytes
device size with M = 1024*1024: 238475 MBytes
device size with M = 1000*1000: 250059 MBytes (250 GB)
cache/buffer size = 8192 KBytes
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 1
Advanced power management level: 128
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
SMART feature set
* Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
* Advanced Power Management feature set
SET_MAX security extension
Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* 64-bit World wide name
* IDLE_IMMEDIATE with UNLOAD
* Segmented DOWNLOAD_MICROCODE
* Gen1 signaling speed (1.5Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
DMA Setup Auto-Activate optimization
Device-initiated interface power management
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Long Sector Access (AC1)
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
unknown 206[12] (vendor specific)
unknown 206[13] (vendor specific)
Security:
Master password revision code = 65534
supported
enabled
locked
not frozen
not expired: security count
not supported: enhanced erase
Security level high
92min for SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 50014ee2559ab684
NAA : 5
IEEE OUI : 0014ee
Unique ID : 2559ab684
Checksum: correct
Note that the drive is password protected. If I use 'hdparm --security-disable' with my known password, it fails with the following error:
$ sudo hdparm --security-disable password /dev/sdb
security_password="password"
/dev/sdb:
Issuing SECURITY_DISABLE command, password="password", user=master
SECURITY_UNLOCK: Input/output error
If I try this for few times, the security count expires.
I see three problems that it could have:
- my hdparm/system/whatever does not fully support the drive; maybe the password cannot be accepted?
- maybe the password used by the laptop bios was filled with other characters after my typing: spaces?
- not the password is the problem, but getting information from the drive: not supported by this system?
I assume dmesg is the key, but I can't interpret it. I hope someone could tell me what should I verify/do further, I have no idea what to test anymore.
Last edited by akephalos (2009-08-30 11:27:42)

djszapi wrote:Is it a crypted system ? Can't you boot into it from livecd neither ? What did you do immediately before when this error started to occur ?
No, it is not encrypted. Just as an information, it contains 4 partitions: sdb1=NTFS, sdb2=ext4, sdb3=swap, sdb4=ext4.
This error did not occur when I was using it on my laptop, but I took the HDD out and mounted it in my girlfriend's computer, she has another Arch installed there, so I don't meed to boot from this disk, just to be able to read it. The password is a disk password - hardware probably, not for encrypted partitions. I could not disable the password because the original laptop doesn't start anymore, and the BIOS settings on this desktop computer does not support HDD password, but only System password.
So, if the HDD had no passwod set, I could tell you if the reading problem comes from some incompatibility issues, but as for now, I can't tell where it comes from, because I need to deactivate its security with hdparm --security-disable first. But this actually looks to not work, or something.
I'm thinking that the mianboard doesn't support this HDD directly connected, the things I'll do next week are:
- buying an external HDD 2.5 rack
- plug it in the USB
- try again hdparm and anything required to make it read.
If this fails, too, probably the only remaining solution is to find someone with an Acer laptop to put this HDD inside and backup my data, or at least deactivate the pass from the bios setings.
Btw, I think this is something worth mentioning to warn the users in general: this Acer 5520G was of very poor quality, things began to crack right after the one year guarantee expired, beginning with the DVD-writer.

Radeon HD 8750m switchable graphics driver BY HP is not working on Windows 8.1

Hello all,
I have laptop Envy 6-1200el.
It's a good machin but I have always been annoyed by video drivers trouble.
When I bought my PC last year it worked good when we had Windows 8, but the video drivers didn't work properly already there.
The drivers made troubles when I tryed to start some 3D applications as Batman: Arkham Asylum. The problem was the HP video driver. That driver is made by Radeon HD drivers plus Intel HD 4000 series all together.
To make the two video cards working together properly you cannot use intel driver installation first then the AMD catalyst installation utility, but you need a driver installation utility that installs the two video cards both, otherwise the switchable graphics will not work properly and 3D applications won't start.
When I had Windows 8.1 update I had absolutely to find a new driver. I downloaded the automatic utility from AMD site and luckily it downloaded an updated driver that was including and installing together both the video cards properly. Since there my laptop started to work very good in everithing.
Some days ago I had to format my PC and that good video driver got lost.
I installed almost everithing including windows 8.1 update but I sadly discovered that on AMD site it was downloadable only the Radeon HD driver not including any more switchable graphics installation and Intel HD driver.
I have now installed the video driver given by HP on the right laptop portal, but this driver IS SO BAD!!!
HP says that it's an update driver working properly on Windows 8.1 but it's false!
MY PC WITH THAT HP DRIVER IS MAKING MANY TROUBLES:
- 3D GAMES ARE NOT STARTING OR NOT WORKING PROPERLY;
- PASSING THE MOUSE ON THE NEW START BUTTON ON WINDOWS 8.1, THE BUTTON BECOMES BLACK!
- HP UTILITY CENTER IS NOT OPENING;
- HP SUPPORT ASSISTANT IS NOT WORKING PROPERLY;
- THE SYNAPTICS MOUSE DRIVER DOESN'T WORK PROPERLY, THE DOUBLE TOUCH DOESN'T WORK ETC.;
- iNTEL DRIVERS INCLUDED ON THAT HP PACKAGE ARE OLD;
- SWITCHABLE GRAPHICS DOESN'T WORK GOOD AND IS NOT ABLE TO ADDRESS SOME 3D CHARGES TO THE RIGHT CARD.
PLEASE HP RELEASE AN UPDATE! pLEASE MAKE A REAL COMPLETE DRIVER THAT IS REALLY ACTUAL AND IS REALLY WORKING ON WINDOWS 8.1 WITHOUT CONFLICTS, WITHOUT GRAPHICS ERRORS ETC.!!!
THIS SITUATION IS UNACCETTABLE, SOLVE IT PLEASE!

Hi Fotoji,
I want to be honest, it's very disappointing for me to be treated like a child.
You should know that most of the people you meet here in this forum are not n00bs and the causes you suggest to consider haveall already been excluded in every way you would try yourself too!
The fact you say, that the issues are caused by a 'broken OS' are so disappointing and unbelievable!
I work in IT field since I was 14yo and now I am a graduated 28 who knows very well how to handle a PC in a clean and smart way.
Look, many of these issues was already 'on' when I bought and started my PC for the very FIRST TIME.
The video drivers needed are auto-installing drivers containing intel and AMD video drivers both and installed together at the same time.
The first day I had my PC the system was VIRGIN, I simply installed steam then ran 'Batman:Arkham Asylum' to make a try, it has never ran up, no matter if the OS is W8 or W8.1, no matter if the PC is new or used for 6 months, that driver has never worked good.
I tryed many things, used HP recovery manager several times in order to make a clean OS new installation, but it always went like that.
Recently I sent my computer to HP Italy fro an hardisk problem, replaced in warranty. The laptop came back CLEAN, perfect, with W8.1 and all the new recent drivers.
The problem was the same, games did not run or ran badly, the start symbol was black, HP Utility Center didn't work.
So tell me where's the magic when I unistall in a CLEAN AND CORRECT way those video drivers, why EVERITHING COMES TO WORK SO GOOD BACK????
Some months ago I knew that those drivers where so bad so I tryed to download the original driver package from AMD site, hoping that they was including the intel video drivers both, and guess...IT WORKED!
Those drivers was including the intel video drivers too during installation, then after a restart I had NO GRAPHICS ERROR, NO HP UTILITY CENTER FREEZE, ANY GAME OR 3D APPLICATION WORKED AT LEAST 2x FASTER AND NOT ANY COMPATIBILITY PROBLEM IN ANY STATE OR SITUATION.
Unfortunately my laptop started to have maybe some motherboard power problems and my HDD passed away then HP took my pc and fixed it.
When it came back it was perfect again, virgin, with all the update installed, with those bad HP drivers installed again, so with all those problems that I found since I bought it: graphics error, compatibility problems, some programs freeze, all WHITOUT TOUCHING ANYTHING!!!
I knew that I would solve it just downloading the right drivers directly from AMD site but UNLUCKILY THE NEW CATALYST 14.4 DIDN'T INCLUDE THE INTEL VIDEO DRIVER ANY MORE.
I had all those compatibility, stability and graphics problems always with a just-formatted computer with all the updates installed, a virgin untouched machine just formatted completely automatically using HP recovery manager or fixed by your engeneers!!!
The only case everithing worked very good was when I used the original AMD's drivers, when these used to inclued the intel graphics drivers too during AUTO-INSTALLATION.
I am replying now using a just-formatted machine automatically and perfectly just using HPRECOVERY MANAGER,and updated using WINDOWS UPDATE and HP SUPPORT CENTER self updater.
So guess what???? When I uninstall in A CORRECT WAY your HP video drivers (doesn't matter if the new one or the oldest) everything works good back, and when I used original AMD drivers everything worked so good.
It's so hard to do something wrong about it, the driver installation utility are IDIOT-PROOF, you cannot do anything during installation except for clicking the RESTART button.
So AMD used to make perfect drivers and now not any more, sadly, every issue disappears without your driver installed, HP sent me a perfect virgin computer with the same issues.
So please, don't tell me that AMD is able to make better software, don't tell me HP is not able to handle a recovery and sent me a pc with the same issues, don't tell me I probably made a bad use of my VIRGIN laptop after years spent on SGI workstations UNIX based.
I know how to keep a pc clean, and I'm telling you something more: the new synaptics mousepad driver package you are giving from HP website and HP support center DOESN'T WORK GOOD TOO!!!
Once you accept the auto update it starts with the self installation, but after the restart gess what?? The double toe gesture used to simulate the right click doesn't work any more!!!
No matter if you try to change any option in the control panel, no matter if you have windows 8 or 8.1, just try to unistall that and reinstall the old synaptics mouse driver and, OH WOW MAGIC, IT WORKS GOOD BACK AGAIN!!!
So now what?
Are you thinking that HP engeneers who fixed my laptop wasn't able to re-install windows and drivers?
The IT engineers working for HP are maybe also n00bs that can't handle a pc format and send me a BROKEN OS as you said?
I am magically breaking my os system just clicking one time on clean automatic HP recovery button then click on the automatic update buttons twice????
Perhaps AMD is able to make more stable end recent drivers than HP does???
(considering that aven the last HP graphics drivers update is so bad because the intel side of the package is very old and you can recognize it just making a comparison with the new intel additional control panel!)
I don't need to recover the system for the 4th time in a proper way (plus HP fix would be the 5th!), I know these silly things.
I need to be taken seriously and not be treated like a grandmother who's not able to switch-on a smartphone!
I would challenge anyone to operate on my computer and try to solve it using Teamviewer and HP's drivers!
I think I've been quite hard nut hopefully clear, so please do something more than giving me a manual fro grannies.
Thank you.

Driver problem, Colour Sensor not working properly?

Hey!
My W530 came with windows 8 preinstalled. Unfortunately I got sick of it after 2 months of use and decided to install windows 7. After turning off safety boot in the bios menu, windows 7 worked pretty good. I'm only having a few issues at the moment.
- Some hardware is missing its drivers. I installed most of the drivers (needed ones) as far as I know. But in the device manager, its showing me that software is missing.
- X-rite colour sensor is not working. It worked in windows 8 and I absolutely love it. But when I try to make a new profile (calibrate), it gives me an error (not sure what the error is in english, so here goes google translate: error setting calibration-initialization) and three beeps.
Some of my own thoughts are that, when I had windows 8, my screen showed up as 'Thinklad LCD' or something similair (in the screen resolution menu). Now it shows up as 'screen of portable computer' (this is obviously not the exact term it shows, its the standart name that windows shows for monitors and displays. hooray for google translate again). I was guessing that maybe I am missing a display driver (even though I could not find one myself). And since it shows 'ACPI' at the device manager at 'unknown device', I am guessing it has to do with a harddrive driver?
I really tried my best spitting out the forum, and google. But I got no luck. I really hope someone here can help me (again).
Thanks a lot!
Image showing errors and what not. Its dutch, so if a translation is really needed, I'll try my best and translate most of the onscreen stuff:
Link to picture (sorry for putting a picture here at first)
EDIT:
I found the error log of X-rite, so here it is:
Misc.txt
isAvailable(): Failed to get device - 5
isAvailable(): Failed to get device - 5
XRLaptopSDK --> XRCalibrationInit
[za 17. aug 11:10:43 2013] Error Code [10]. Error setting Calibration init. : ..\..\..\..\LogoAppPriamos\Source\Eccm2\XRLaptopIFSDKWrapper.cpp:36
isAvailable(): Failed to get device - 5
isAvailable(): Failed to get device - 5
XRLaptopSDK --> XRCalibrationInit
[za 17. aug 11:10:54 2013] Error Code [10]. Error setting Calibration init. : ..\..\..\..\LogoAppPriamos\Source\Eccm2\XRLaptopIFSDKWrapper.cpp:36
startPostCalibration --> Restoring DPST state
XRLaptopSDK --> START start-PostCalibration
XRLaptopSDK --> XRCalibrationLidTurnOnNotification
[za 17. aug 11:11:04 2013] Error Code [6]. Error Turning on laptop notifications. : ..\..\..\..\LogoAppPriamos\Source\Eccm2\XRLaptopIFSDKWrapper.cpp:196
MeasuredPatchesLogger.txt
Monitor Name: Algemeen PnP-beeldscherm
Monitor Type: 4
Serial Number:
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

I am sorry for the bump, but I reinstalled the x-rite software and got a different error this time:
isAvailable(): Failed to get device - 5
isAvailable(): Failed to get device - 5
XRLaptopSDK --> XRCalibrationInit
XRLaptopSDK --> XRCalibrationLidTurnOffNotification
[di 20. aug 00:26:25 2013] Error Code [7]. Error Turning off laptop notifications. : ..\..\..\..\LogoAppPriamos\Source\Eccm2\XRLaptopIFSDKWrapper.cpp:43
isAvailable(): Failed to get device - 5
isAvailable(): Failed to get device - 5
XRLaptopSDK --> XRCalibrationInit
XRLaptopSDK --> XRCalibrationLidTurnOffNotification
[di 20. aug 00:26:32 2013] Error Code [7]. Error Turning off laptop notifications. : ..\..\..\..\LogoAppPriamos\Source\Eccm2\XRLaptopIFSDKWrapper.cpp:43
isAvailable(): Failed to get device - 5
isAvailable(): Failed to get device - 5
XRLaptopSDK --> XRCalibrationInit
XRLaptopSDK --> XRCalibrationLidTurnOffNotification
[di 20. aug 00:26:55 2013] Error Code [7]. Error Turning off laptop notifications. : ..\..\..\..\LogoAppPriamos\Source\Eccm2\XRLaptopIFSDKWrapper.cpp:43

Keithley 2400 driver for Labview 8 not working

I searched the boards and found this driver for a Keithley 2400 that should run with Labview 8. I have Labview 8.6.
http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=25B255F3AA83660EE0440003BA7CCD...
I put the driver folder in the proper location and the vi's are appearing in the selection menu as expected. I have my Keithley 2400 connected to a serial port on COM1. When I simply try to run the initialization VI it doesn't work. I know it's communicating in some form, because my Keithley goes into remote mode and the initialization driver is able to properly read what the model of the Keithley is. When it gets to the VISA read vi it is timing out, but still outputs the correct model identification. I don't understand why it's timing out and not working.
Is there something else I should've installed? The driver readme says the only additional software required is NI-VISA 3.2, however I have version 4.4, so I should be fine. I just don't understand why it's "sort of" working. Any help would be greatly appreciated.
Solved!
Go to Solution.

It doesn't sound like it. You are using serial and that requires nothing beyond VISA - plus simple commands are working. The fact that the drivers can send and receive the SCPI identification command tells me that you are communicating with the instrument. (That is what causes the instrument to tell you what kind of device it is.) The thing to remember about drivers you get from vendors is that they can be very buggy. Often times they were written by someone who doesn't know LV very well, or were perhaps donated to them by one of their customers. I always view vendor-supplied drivers as simply a starting place for creating really usable ones.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Valuemotion driver version 5.01 not working with windows xp

The valuemotion driver version 5.01 is not working on windows xp. When used it does not work properly on MAX automation explorer.Please Guide me as to how I should proceed??

I am not sure exactly what behavior you are seeing, but you will want to upgrade to the latest version of Valuemotion 5.0.2 from the following link:
http://digital.ni.com/softlib.nsf/websearch/68E44A959190305F86256A5500685480?opendocument&node=132060_US
Best Regards,
Chris D
NI Applications Engineer

Driver to email client not working

For my class we are attempting to write our own email client. Our professor gave us the following driver. However when I attempt to compile the driver I get these errors:
MailClient.java:125: cannot find symbol
symbol : variable envelope
location: class MailClient.SendListener
               SMTPConnection connection = new SMTPConnection(envelope);
                                                              ^
MailClient.java:126: cannot find symbol
symbol : variable envelope
location: class MailClient.SendListener
               connection.send(envelope);Admittedly it could be something with the SMPTConnection code, as that is what we had to write. However I would have expected it to throw some sort of exception in there and it does not. Any help to figure out why the driver is not working would be appreciatted.
Code:
import java.io.*;
   import java.net.*;
   import java.awt.*;
   import java.awt.event.*;
/* $Id: MailClient.java,v 1.7 1999/07/22 12:07:30 kangasha Exp $ */
* A simple mail client with a GUI for sending mail.
* @author Jussi Kangasharju
    public class MailClient extends Frame {
    /* The stuff for the GUI. */
      private Button btSend = new Button("Send");
      private Button btClear = new Button("Clear");
      private Button btQuit = new Button("Quit");
      private Label serverLabel = new Label("Local mailserver:");
      private TextField serverField = new TextField("", 40);
      private Label fromLabel = new Label("From:");
      private TextField fromField = new TextField("", 40);
      private Label toLabel = new Label("To:");
      private TextField toField = new TextField("", 40);
      private Label subjectLabel = new Label("Subject:");
      private TextField subjectField = new TextField("", 40);
      private Label messageLabel = new Label("Message:");
      private TextArea messageText = new TextArea(10, 40);
     * Create a new MailClient window with fields for entering all
     * the relevant information (From, To, Subject, and message).
       public MailClient() {
         super("Java Mailclient");
      /* Create panels for holding the fields. To make it look nice,
      create an extra panel for holding all the child panels. */
         Panel serverPanel = new Panel(new BorderLayout());
         Panel fromPanel = new Panel(new BorderLayout());
         Panel toPanel = new Panel(new BorderLayout());
         Panel subjectPanel = new Panel(new BorderLayout());
         Panel messagePanel = new Panel(new BorderLayout());
         serverPanel.add(serverLabel, BorderLayout.WEST);
         serverPanel.add(serverField, BorderLayout.CENTER);
         fromPanel.add(fromLabel, BorderLayout.WEST);
         fromPanel.add(fromField, BorderLayout.CENTER);
         toPanel.add(toLabel, BorderLayout.WEST);
         toPanel.add(toField, BorderLayout.CENTER);
         subjectPanel.add(subjectLabel, BorderLayout.WEST);
         subjectPanel.add(subjectField, BorderLayout.CENTER);
         messagePanel.add(messageLabel, BorderLayout.NORTH);
         messagePanel.add(messageText, BorderLayout.CENTER);
         Panel fieldPanel = new Panel(new GridLayout(0, 1));
         fieldPanel.add(serverPanel);
         fieldPanel.add(fromPanel);
         fieldPanel.add(toPanel);
         fieldPanel.add(subjectPanel);
      /* Create a panel for the buttons and add listeners to the
      buttons. */
         Panel buttonPanel = new Panel(new GridLayout(1, 0));
         btSend.addActionListener(new SendListener());
         btClear.addActionListener(new ClearListener());
         btQuit.addActionListener(new QuitListener());
         buttonPanel.add(btSend);
         buttonPanel.add(btClear);
         buttonPanel.add(btQuit);
      /* Add, pack, and show. */
         add(fieldPanel, BorderLayout.NORTH);
         add(messagePanel, BorderLayout.CENTER);
         add(buttonPanel, BorderLayout.SOUTH);
         pack();
         show();
       static public void main(String argv[]) {
         new MailClient();
    /* Handler for the Send-button. */
       class SendListener implements ActionListener {
          public void actionPerformed(ActionEvent event) {
            System.out.println("Sending mail");
         /* Check that we have the local mailserver */
            if ((serverField.getText()).equals("")) {
               System.out.println("Need name of local mailserver!");
               return;
         /* Check that we have the sender and recipient. */
            if((fromField.getText()).equals("")) {
               System.out.println("Need sender!");
               return;
            if((toField.getText()).equals("")) {
               System.out.println("Need recipient!");
               return;
         /* Create the message */
            Message mailMessage = new Message(fromField.getText(),
                     toField.getText(),
                     subjectField.getText(),
                     messageText.getText());
         /* Check that the message is valid, i.e., sender and
          recipient addresses look ok. */
            if(!mailMessage.isValid()) {
               return;
         /* Create the envelope, open the connection and try to send
          the message. */
            try {
               Envelope envelope = new Envelope(mailMessage, serverField.getText());
                catch (UnknownHostException e) {
               /* If there is an error, do not go further */
                  return;
            try {
               SMTPConnection connection = new SMTPConnection(envelope);
               connection.send(envelope);
               connection.close();
                catch (IOException error) {
                  System.out.println("Sending failed: " + error);
                  return;
            System.out.println("Mail sent succesfully!");
    /* Clear the fields on the GUI. */
       class ClearListener implements ActionListener {
          public void actionPerformed(ActionEvent e) {
            System.out.println("Clearing fields");
            fromField.setText("");
            toField.setText("");
            subjectField.setText("");
            messageText.setText("");
    /* Quit. */
       class QuitListener implements ActionListener {
          public void actionPerformed(ActionEvent e) {
            System.exit(0);
   }

This is what I mean:
/* Create the envelope, open the connection and try to send the message. */
           Envelope envelope = null;
            try {
                 envelope = new Envelope(mailMessage, serverField.getText());
                catch (UnknownHostException e) {
               /* If there is an error, do not go further */
                  return;
            try {
               SMTPConnection connection = new SMTPConnection(envelope);
               connection.send(envelope);
               connection.close();
                catch (IOException error) {
                  System.out.println("Sending failed: " + error);
                  return;
            System.out.println("Mail sent succesfully!");

Window 8 TouchPad Driver for U300e is Not Working...

Hi,
I have installed the Window 8 Drivers for Idea Pad U300e. After installed Touch Pad Driver, The Touch Pad is not working anymore. To use mouse, I have to plug in external mouse and have to uninstall the Touch Pad Driver. After removed it, It working fine again. It is working fine but why i want to upgrade the touch pad driver from lenovo is there got plum sensitivity and disabled the track pad using the function key. Any Expret suggestion on how can i do the driver to work fine??
Best Regards,
Mahar.

Hi
I cannot believe that you are not able to install the LAN driver on this A100 Satellite!
However, the Sat A100-784 supports an Intel 82562GZ 10/100 Mbit (Ekron) Lan chip.
If you want you can download and install the Lan driver from the Intel page:
http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=999&lang=eng
There you will find the drivers for the Intel 8256x Ethernet Controllers
Bye

WDS 2012 driver filtering by model not working

Hello,,
I am trying to filter all the drivers and force them to install for a HP Elite 8300 USDT and it is not working at all. When I remove the filter all the drivers install except the USB3. What gives? Any ideas?
I am using Server 2012 R2, but I am still using Windows 7 boot, do I need to upgrade that to the server 2012 R2 boot.wim for full support?

Hi,
Run this command “wmic csproduct get name”,
make sure you typed the correct model name. And I found that remove model and keep only manufacture filter works with HP machines. Check the following thread:
WDS 2012 Driver Pools
http://social.technet.microsoft.com/Forums/windowsserver/en-US/6a0b392f-a339-48f2-8e2f-6d5d11b3d554/wds-2012-driver-pools
Hope this helps.

Installing SSD Drive - SATA 3 connection not working

Trying to install a new Samsung EVO 850 SSD Drive. The motherboard is MSI MS-7778 (Jasmine). I can get it to work on the white, dark blue, and light blue SATA connections. The yellow SATA connection (I think labeled SATA 3) does not work. It does not work when I connect it to anything in the computer. I need all four connections. Two hard drives and the DVD reader are already using the white, dark blue, and light blue SATA connections.Does anyone know how to get the yellow SATA connection (SATA 3) to work?Thanks! It's been a long night....

Thanks for the suggestion. I too had noticed the motherboard diagram. I tried and tried all three SATA connections over and over again with no progress. I tried everything I could think of. Changed wires, checked the BIOS, etc.I was just ready to give up when my wife received a call from the Microsoft store notifying her that the install of Windows 10 on her laptop was done. She put the computer tech on the phone, I described the problem and he suggested that I try what I had been contemplating - reinstalling Windows 10 all over again. So I plugged in the SSD drive, both regular hard drives and said to myself, "After this many hours, I've got nothing to lose!" Reinstalled Windows 10 from my USB flash drive and everything worked like a charm. I couldn't believe it!It appears Windows 10 reads your entire hardware configuration on the initial install through the Internet. Which takes forever!Windows 10 doesn't like changes. So those of us who like to upgrade our computers with new SSD drives, memory, etc. are going to have to re-learn how to do it. It used to be so easy! Learning Windows 10 and how it reacts to new hardware configurations certainly sucked up many hours of my time!Thanks for the on-point advice.

Latest I-tunes download AMD USB Driver for xp will not work therefore cannot sinc ipad

I have downloaded latest I-tunes version 10 and am experiencing problem with the Apple mobile device USB driver not working correctly.
I have tried deleting all apple software and re-installing again - without success!
I am trying to Sync primarily an I-pad2 but also an older Ipod classic
I am operating on XP Pro with SP3.
Can anyone help please?

Welcome, and thank you for a thorough input! Hope I don't miss something you already said!
Quick version: Try setting processor voltage to 1,5 volt.
Long version:
Posting at wrong FSB can be put down to two things:
1 The processor isn't what you thought it is, but I think you eliminated that.
2 The system cannot run the processor at the correct speed. Mainly this has to with overheating, and/or that memory and processor cannot cooperate. This must be it, as you noticed the processor is correctly recognised.
You have little connected right? Then the best thing would be to pull power cable out. Take the motherboard and redo the seating of the processor, this is much better done with motherboard taken out.
At the same time, I suggest you clear CMOS. Should always be done when changing processor, and I've noticed on the Internet there are a few 1,5V XP2800 around.
http://64.233.183.104/search?q=cache:Q4eIa6OhudcJ:forums.amd.com/lofiversion/index.php/t47487.html+AXDL2800DLV4D+problem&hl=sv&gl=se&ct=clnk&cd=1

I have tried transferring my iphoto library to my external hard drive and it's not working.

I have a Macbook Pro. I have recently gotten into photography and to save space on my internal hard drive, I bought an external hard drive to keep all of my photos on. It's a Toshiba with 1 TB of memory. I have searched and searched on how to transfer my iphoto library to it and I'm getting the same answer. I open two finder windows, one with pictures open, the other with the external hard drive open. I have tried to drag the iphoto library icon to the second window to the external hard drive and instead of it staying there and loading everything it gives me the circle with a diagonal line through it and floats back up to the pictures finder window. I'm not sure what the problem is, but I really need help!

you need to make sure the drive you are moving the iphoto library to is formatted in the mac OS extended journaled format
you can view and/or change this in the disk utility which is found in the utilities folder in applications within finder.
on the left side select the external HD and then click on the erase tab it will show you the format it's currnetly in, if it's not mac OS extended journaled select that from the drop down and then hit the button that says erase.
after the erase is complete try the article i gave you again to move the location of the lbrary and it should work.
good luck

S10-3 wirless driver on xp is not working

Similar Messages

Maybe you are looking for