SA520W SSLVPN for Remote Users Only 64kbps - Please Help!

I have setup an SA520W and configured SSL-VPN for our small business. Everything seemed to go smoothly and I tested SSL VPN by logging in and playing around a bit which seemed to be fine. However, shortly after deployment I started getting complaints about it being much slower than our old VPN through the consumer grade router I just replaced. I investigated and tested with IE8 and Chrome on Windows XP 32-bit with several different machines, and in all instances it did seem very slow indeed. While looking around I noticed that the Task Manager under the Networking tab shows the SSL VPN connection as VirutalPassage at 64 Kbps. Going into Network Connections shows VirtualPassage under the Dial-up heading with device name Virtual Passage SSLDrv Adapter. Additional properties describe it as an ISDN channel. I have attached an image of the Task Manager pane.
The router is running the latest firmware of 2.1.51. It is connected via a static IP that does not require a login, to our dedicated 5 Mbit / 5 Mbit ethernet over copper link to our ISP. We get great speeds and low latency through everything but SSL VPN connections. I haven't done anything fancy so the router certificate is the factory default. Currently we are using the existing 2 SSL VPN licenses that come with the router until we need more access, at which point I want to upgrade to the 25 user bundle. However, I don't feel comfortable upgrading until I get this resolved, because 64kbps simply cannot work for us for a VPN solution.
Does anyone know how to configure the SSL VPN to not limit at 64kbps? My engineers are making fun of me for bringing us back to dialup, and I have to agree with them!
Thanks for any help you can provide!

I worked with Blake at Cisco Small Business Support (who is awesome, BTW) and it looks like having Split Tunnel Support enabled was what was making it so slow. Our network setups is on 192.168.2.x, home users are on 192.168.0.x, and the VPN clients are on 192.168.251.x so I had enabled Split Tunnel Support and setup a Client Route for 192.168.2.0 with Subnet Mask 255.255.255.0.
I disabled Split Tunnel Support, and even though it still said 64kbps the link is going much, much faster!

Similar Messages

OBIEE access denied for some users only

Hi All,
we are using OBIEE 10.1.3.4 version on windows envorinment .The users can access the OBIEE reports using 'PORTALPATH' session varible in RPD.For some of the users are got "access denied" while they are accessing for thir particular dashboard.Eariler these user got access this dashboard with out any errors.We dnt changed in our system anything from last three months.
We have no idea why we are getting these error for particular users only.Its Prod issue we need to reslove these error ASAP.
we are getting these error"acess denied for user to path/shared/shared/_test/testdashboard
Error Codes:09XNZMXB"
but last one year its working without any issues .From our side we dnt did any changes in production like RPD level,Catalog level and config file changes , we have no idea why suddenly we are getting these kind of error for some users only not for all users.
Could u please advice me how to reslove this PROD issueASAP.
Thanks,

Well its Prod (you have a dashboard called testdashboard in Prod?) anyway - someone might have changed the presentation catalogue permissions on the dashboard. All it takes is for someone to remove 'Everyone' or change a Group permission and it could effect.
If they changed the Parent folder and cascaded the changes down this might cause this issue.
You have a folder called 'Shared' - check the groups that the people are in have 'Traverse' , 'Read' or higher. Also chek dashboard permissions themselves from Settings-Manage Interactive Dashboards - Check the Padlock icon.
Are you users getting allocated into the correct WEBGROUPS ? Is this assisngment done explicitly in the webcat or via an RPD Variable ? Have you checked NQQueryl.log to make sure any init blocks are completing successfully?
Either persmissions have changed or group memebership is not completing.
Good luck
Alastair

AD SSO not happening for Remote Users

Dear Members
I am having an issue with the NAC Deployment for Remote users (Users behind WAN Router)
Windows AD SSO (2008) is happening for LAN users successfullly, however remote users
are not able to do AD SSO.
it is ensured that remote users even in unauthenticated state can reach Active directory. there is no filtering
on any of the device across the path, for this communication.
When i use Kerbtray on the remote PC, i found no tickets at all.(i am logged in thru Domain)
what could be going wrong, is it delay (as they are wan user) which might attribute this issue, and if so, where are the needed parameters that can be tuned for AD SSO to happen.
Any help will ne highly appreciated.
thanks
Ahad

Hi Ahad,
As long as ALL the policies in Table 8-1 are configured for the Unauthenticated Role
http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/48/cas/s_adsso.html#wp1174219
the CAS should be out of the picture for what concerns the communication between the PC and Kerberos.
If the Kerbtray.exe output for a failing user is empty, it means that the unsuccessful users do not have any Service Ticket (ST) at all.
This points to an issue with AD (considering the fact that the CAS is already allowing all the traffic to/from AD).
The failing users are either unable to send the Ticket-Granting Ticket (TGT) to AD, or they are unable to obtain the Service Ticket (ST) from AD.
The CAS during this phase is neither performing any actions nor blocking any traffic, since all the communications to/from AD are already fully open in the unauthenticated role.
Regards,
Fede
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

How to create accounts for remote users in 1841

Hi,
I was wondering how can i create accounts for remote users to be able to vpn please ? I have setup the vpn server successfully.
Regard,

Hello.
I believe that you can try this:
Router# configure terminal
Router (config)# password encryption aes
Router (config)# crypto ipsec client ezvpn ezvpn1
Router (config-crypto-ezvpn)# username server_1 password 0 blue
if you are using easy vpn.
from: http://cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a0080455b7d.html

Changing commandLink color for perticular user only

Hi,
I want to change color of commandLink , in perticular user session for that user only , if user has cliked on that link.
say, I have two users A and B.
My commandLink default color is Blue.
Both users are accessing the application.
And User A has cliked the commandLink, then his commandLink color should change to Red from Blue.
While user B should see his commandLink[b] color as Blue(as he not yet clicked the commandLink)
Can anybody tell me how to do this ?
Thanks
Sandip

You can use EL in the styleClass attribute.
Basic example with a boolean value:<h:commandLink styleClass="#{myBean.booleanValue ? 'someClass' : 'anotherClass'}" />The logic behind can just be written in MyBean#isBooleanValue(). The applicationMap might be useful to get/set values in.

Account Number In Bank Account Transfer CM It Show For My User Only and Not

Hi,
Cash Management / Bank Account Transfers
when make transfer From Bank Account Transfer and Enter Of All The Required Data
And Search Bank Account Number It Show For My User Only And Not Show For Some Other Users
With The Knowledge That The same responsibility For My User and All Users In Cash Resp.
How to solve this problem ??
Thanks,
Mohamed Gamal
Edited by: Mohamed Gamal on May 12, 2011 11:12 AM

I bought MLB.tv premium through Apple TV however I was not provided with a user ID and password to be able to log in on to the computer to watch as I would if I bought directly from MLB.tv. Is this a scam? Anyone else have this issue.

I bought this very nice iMac. The first time I ever use a Apple product. Can someone please tell me where the delete key is on the keyboard. I cannot think for one moment that Apple did not provide for such a key. Please help.

I bought this very nice iMac. The first time I ever use a Apple product. Can someone please tell me where the delete key is on the keyboard. I cannot think for one moment that Apple did not provide for such a key. Please help.

The delete key does a backward delete because it is the natural way to delete while typing. May not be to you and the millions of youngsters who grew up with windows computers. When you are typing and want to delete that which you just typed you are already at the end and you delete back to where you want to re-type. When you go back to a document and want to delete a selection, you have to go to the end of the selection instead of the beginning. it's just the way its always been done on macs. it takes some getting use to.
If you select text to be deleted with your mouse then the delete key deletes the selected text. same for either delete key method.
It is not convenient when you tab to fields in a form. That why fn-delete does a forward delete.
Macs have a couple of keyboards. The small "wireless keyboard" only has the (backward) delete (fn-delete forward). The larger "Apple Keyboard with Numeric Keypad" has both a Delete (backwards) key beside the = abd it has the "delete >" key in the groups with fn, home, end, Pg up and Pg dn. This keyboard is best for users who have switched from windows or are familiar with the windows forward delete.

My apple id is not working for my iPhone activation. Please help me.

my apple id is not working for my iPhone activation. Please help me.
i'll just restore it.

Not working in what way?
Only the Apple ID that was used to enable "Find My iPhone" on the device can be used to bypass Activation Lock.

I ordered the IX500 Scan Snap through Amazon and received the incorrect XI Standard disc in Windows format instead of for my Mac. I contacted Amazon and they suggested I contact Scan Snap who suggests I contact Adobe for the correct disc. Please help.

I ordered the IX500 Scan Snap through Amazon and received the incorrect Adobe Acrobat XI Standard disc in Windows format instead of for my Mac. I contacted Amazon and they suggested I contact Scan Snap who suggests I contact Adobe for the correct disc. Please help.

Fujitsu delivers only Adobe Acrobat for Windows, not Mac.
http://www.fujitsu.com/global/services/computing/peripheral/scanners/product/ix500/

New loaded apps are working but the app button shows only grey - please help

New loaded apps are working but the app button shows only grey - please help...I have this problem since 3 days ago. I have synchronized and restart my iPad but the matter didn't changed

well in thatcase, i need another help .
thanks for your instant reply.
i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone.

Windows 7 Screen Resolution not changing at all when I try to change settings. I ve lost my ToolBar on internet for settings ( deletion of cache) Please help me to reset screen.

Windows 7 Screen Resolution not changing at all when I try to change settings. I ve lost my ToolBar on internet for settings ( deletion of cache) Please help me to reset screen. The screen seems to have slipped or moved to the right. Only icons on left of
screen showing. I Need to regain The right side of the scree
I have tried everything I know to sort this out. Thankyou you in advance. Katy Nanna x

Hi,
When you set your monitor to a screen resolution that it won't support, the screen will go black for a few seconds while the monitor reverts back to the original resolution.
Regarding screen resolution, we may follow the below two articles to change it:
Change your screen resolution
Getting the best display on your monitor
Follow the steps below:
1. Open Screen Resolution by clicking the Start button, clicking
Control Panel, and then, under Appearance and Personalization, clicking Adjust screen resolution.
2.Click the drop-down list next to Resolution. Check for the resolution marked (recommended). This is your LCD monitor's native resolution—usually the highest resolution your monitor can support.
And if the monitor is LCD monitor, The monitor's manufacturer or reseller should also be able to tell you the native resolution for your LCD monitor. Or we may check the monitor's manual to adjust.
Best regards
Michael Shao
TechNet Community Support

I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

Plawexki wrote:
... do you know if the contacts, photos, messages etc will be wiped?
Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
You may find this information of interest...
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer

HT202159 An error occurred in the App Store. Try again later(13)..I wait for months!!! please help me! Can't download or update, install and buy! iMac 2008, OS X Lion 10.7.4 (11E53).

An error occurred in the App Store. Try again later(13)
Can't download or update, install and buy!
I wait for months!!! please help me!
<Email Edited by Host>

Disable anti virus software.
Turn off the Firewall in System Preferences > Security (or Security & Privacy) > Firewall
If that doesn't help, open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here:
~/Library/Caches/com.apple.appstore/Cache.db
Click Go
Move the Cache.db file to the Trash.
Now here:
~/Library/Preferences
Click Go
Move these files from the Preferences folder to the Trash.
com.apple.appstore.plist
com.apple.storeagent.pllist
Now here:
~/Library/Cookies
Click Go
Move the com.apple.appstore.plist file from the Cookies folder to the Trash.
Empty the Trash, try the App Store.

Why isn't my email verify even if I did it so many times then it says your email is verify for another account can someone please help me

I created an apple ID with iTunes gift card
Then i signed in
I tried to download a game and it said that
My email is not verifyed then I to verify it but
It said that my email is already verifyed for another email
Can someone please help me with this problem

Make sure there is no other account using that email. (Try going to https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ hitting Reset your password, and then enter the email address.

What do I do. I just turned my iPod touch 5 on for the first time in about two months and it telling me that it is disabled for 23,079,134 minutes please help

What do I do. I just turned my iPod touch 5 on for the first time in about two months and it telling me that it is disabled for 23,079,134 minutes please help anything would be good I also have not backed it up for a while now

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If you previously synced to the computer then you may be able to recovery use of the iPod without erasing the iPod by following the instructions here:
Disabled Recovery-must use syncing computer.

SA520W SSLVPN for Remote Users Only 64kbps - Please Help!

Similar Messages

Maybe you are looking for