SAF TREX search how to search multiple attributes

Hello,
Any of you programmed in the SAF framework? I need some code help to search for multiple attributes.
example: I want to do a search like this
attribute 1 `Description` = Robotarm AND
attibute 2 `Problem` = blocked
I can search only on one attribute at a time.
I use
cl_crm_saf_se_trex_abap
if_crm_saf_se_genil~search
and also tried the function module contained in it
TREX_EXT_SEARCH_DOCUMENTS
Although I make query it does not seem to work for multiple attributes. Can any of you give a code sample.
Best Regards,
Frederik Defour

Hallo,
the reason why your query did not work ist simple: you have to tell TREX about the AND operator as well. Here in an example how the query table could look like:
LOCATION     | VALUE1          | ROWTYPE          | OPERATOR
|--||--
short_text     | my product     | ATTRIBUTE          | EQ
AND
OPERATOR
BRACKET_OPEN
article_type     | 15          | ATTRIBUTE          | EQ
OR
OPERATOR
article_type     | 07          | ATTRIBUTE          | EQ
OR
OPERATOR
article_type     | 99          | ATTRIBUTE          | EQ
BRACKET_CLOSE
I hope this helps
Best regards,
Martin

Similar Messages

Trex Search Error : attribute value is not a date or wrong syntax

Search Failure
Error during search occurred - com.sapportals.wcm.WcmException: attribute value is not a date or wrong syntax

Yes, Let me know if you know about it.
Thanks
Deepak

How to access multiple attributes of a node at the same time in XML AS3

     <chapter id="1" title="">
     <screen title="lesson">
     <swf>EXCEL/CH01/CH01_S01.swf</swf>
     <ltitle>Chapter 1</ltitle>
     <rtitle>Setting Up a Workbook</rtitle>
     <prompt>Choose a lesson</prompt>
     </screen>
     <screen title="lesson" tasks="3">
     <swf>EXCEL/CH01/CH01_S02.swf</swf>
     <ltitle>Chapter 1</ltitle>
     <rtitle>Setting Up a Workbook</rtitle>
     <prompt>Click Next to continue</prompt>
     </screen>
I have 2 attributes of screen node which are title and tasks.
how can I access these 2 attributes at the same time in AS3
Is that correct:
excel.chapter.screen.(@title == "lesson").@tasks
Thanks alot in advance.

var excel:XML = <data>
<chapter id="1" title="">
<screen title="lesson" tasks="">
   <swf>EXCEL/CH01/CH01_S01.swf</swf>
   <ltitle>Chapter 1</ltitle>
   <rtitle>Setting Up a Workbook</rtitle>
   <prompt>Choose a lesson</prompt>
</screen>
<screen title="lesson" tasks="3">
   <swf>EXCEL/CH01/CH01_S02.swf</swf>
   <ltitle>Chapter 1</ltitle>
   <rtitle>Setting Up a Workbook</rtitle>
   <prompt>Click Next to continue</prompt>
</screen>
</chapter>
</data>;
trace(excel.chapter.screen.(@title == "lesson" && @tasks == "3").toXMLString());
Note that for this to work (and not throw an error) every screen node needs a tasks attribute.
In your sample code, the first screen node did not have a tasks attribute, in which case an error is thrown when using @tasks == "3"

How to main multiple attributes for set type R E W ARD_PRO_LOY using IDOC?

Hi,
I'm now trying to add the set type and attributes to my products existing in the CRM system. I decided to use LSMW and IDOC CRMXIF_PRODUCT_MATERIAL_SAVE to maintain the set type and attributes.
I successfully maintained the categories for the products and also assigned the set type. Now I need to add the attributes for this set type, where there are 3:
LMPRODUCT_TYPE
LOYPRODUCT_UNIT
LMPRODUCT_VALUE
But because in the IDOC structure only one attribute can be maintained at one time, how can I input all those 3 attributes together? Thanks a lot.

I tried to insert one data field first then update it by the second attributes, but then the system assigned two separated lines of data to my set type....

How to insert multiple attributes to root elements

Hi,
I have to costruct a request to a service in which all the multipul ements shold be populated as attributes.
The elements should be retrived from response from an intermediate service callout.
Is there any function to do that..

Try this. Be careful that your element does not go deeper than 1 desendant or else you will get concatenating data.
for $mydoc in $root
return element { node-name($mydoc) } (: element constructor notation :)
{ $mydoc/@*, (:add existing attributes :)
for $el in $mydoc/* (: element constructor sub-nodes :)
return attribute {local-name($el)}{data($el)}
I used http://www.xqueryfunctions.com/xq/functx_add-attributes.html as a guide.

How-to map multiple explicit search help values to context attributes?

Hi,
I have a custom explicit Search Help with multiple attributes set as export and uses search help exit for data retrieval. I have set this Search Help for one of the context attribute that is binded to one of the input fields on view.
Now, is it possible to dynamically map other export attributes from this Search Help to other Context attributes?
I know this works for Input helps that are directly derived from check tables but not sure how to do it for explicit Search Helps.
Can anyone please confirm and let me if this is possible? If yes, then can you please share an example or describe how to do it?
Thanks and Regards,

Hi Srinivas,
Check this ..Search help can be dynamically assigned to a field.
data lo_nd_info type if_wd_context_node_info.
lo_nd_info = lo_nd->get_node_info( ).
CALL METHOD lo_nd_info->set_attribute_value_help
EXPORTING
name = 'ATTR1'                  " Your attribute Name
value_help_mode = '121'    " Valid value help mode
value_help = 'Z187442'.      " Search help name
The various possible values that you can pass to value_help_mode are as shown below.
deactivated 101
automatic 111
ddic 121
ovs 131
Also refer this..
Re: How to put dynamic search help in web dynpro ABAP.
Cheers,
Kris.

NEED HELP Search with SAF/TREX

Hello Gurus,
I have to work on standard screen in that they are fetching database and extracting the data by using CL_CRM_EI_IIA_QUERY_UI class. In this calss they are using SET_QUERY, GET_QUERY, GET_TEXT_QUERY, SET_TEXT_QUERY,CREATE_TEXT_EDITOR methods.
I have to add three more fields to this existing screen and ned to add these field values in the search process. I am trying to understand the code and they have not used any select statement. can you pelase help me how to use the above class and for my requirement..
the screen which i am trying to change is CIC0 transaction in CRM win client in FAQ tab knowledge search screen.
what is the SAF/TREX
Please help me on this issue.
regards

i purchased from a lady off Etsy..she sent it to me in PDF. EPS.
and Adobe format.
i was on my mobile device earlier when i wrote the first post.
I can open the file up in adobe. BUT it has a grey and white checkered background and is very large text.
I somehow got it to actually open like a watermark on a photo last nite but the tex was so big it only came across as 2 letters..
I can post the files anywhere just let me kno ..im not sure if they was done wrong or I just am that computer illiterate..which I can believe..i have been robbed quite a bit on logos and blah blah..
I mean no aggravation to anyone, i just dont have a clue where to turn to and get "LEGIT" answers and thats what I need so thats why Im here ..

How can I search multiple columns in a SQL command of Union tables

Hi:
We have a database with tables that are nearly identical that we use for production and production history.
I have created an SQL command in Crystal 2008 to joins several of the tables and then added a "UNION" to connect the History and Prod tables.
I need to search multiple (3 total) columns for 5 different data types, to return the records being investigated. I tried this using an "OR" statement in the where clause and have had inconsistant results.
The first two or statement function perfectly the third works as long as the value being passed is numeric and the last two fail consistantly with invalid column name errors. It appears that crystal is getting confused and passing the wrong data type especially if I do a new search using a different option for the "?SearchParam"
Can some one offer some insite on how I can search these fields to return the record data needed
-- {?SearchParam} is the search parameter passed by Crystal that is a number 1 thru 5
-- {?Search_Val} is a parameter that is passed by Crystal that is a string of what to search for 1 = Numeric CMP ord #("TBSLI21"."LI21_OR_NO"), 2 = Numeric CI ord # ( "TBSLI33"."LI33_CI_OR_NO"),
--   3 =String Ext Sys ord string ("TBSLI33"."LI33_EXT_SYS_SL_OR_NO"), 4 = String CMP Grp string ("TBSLI21"."LI21_OP_GRP_NO"), 5 = composit string PP ord string ("TBSOP13"."OP13_CLR_DAY" & "TBSOP13"."OP13_PP_GRP_SEQ_NO" & "TBSOP13"."OP13_CELL_ID")
SELECT "TBSLI21"."LI21_OR_NO",
"TBSLI21"."LI21_SH_DT_SCDL",
"TBSLI21"."LI21_TS_EN_ORIG",
"TBSLI21"."LI21_TS_SHIP",
"TBSLI21"."LI21_SYS_ORD_CD",
"TBSLI21"."LI21_SHIP_ID",
"TBSLI21"."LI21_WRKST_ID",
"TBSLI21"."LI21_LI_NO",
"TBSLI33"."LI33_CI_OR_NO",
"TBSLI33"."LI33_EXT_SYS_SL_OR_NO",
"TBSLI21"."LI21_OP_GRP_NO",
"TBSLI21"."LI21_LI_STAT",
"TBSOP13"."OP13_OP_GRP_STAT",
"TBSLI31"."LI31_LI_EV_DTL_TX",
"TBSLI31"."LI31_DT_EN",
"TBSLI31"."LI31_TM_EN",
"TBSLI31"."LI31_LI_EV",
"TBSLI21"."LI21_OP_WSH_FLNM",
"TBSLI21"."LI21_PR_ITF_CD",
"TBSLI21"."MFG_PLANT_CD",
"MFG_PLANT_LI"."MFG_PLANT_CD" as PrefPlant,
"TBSOP13"."OP13_OP_GRP_DSP_CD",
"TBSLI21"."LI21_LI_DSP_CD",
"TBSOP13"."OP13_CLR_DAY",
"TBSOP13"."OP13_PP_GRP_SEQ_NO",
"TBSOP13"."OP13_CELL_ID",
"MFG_PLANT_LI"."PRFR_MFG_PLANT_FLG",
"TBSLI21"."LI21_OP_GRP_PS_NO1",
"TBSLI21"."LI21_POMS_MERGE_NO",
"TBSLI31"."LI31_OP_ID",
"TBSLI21"."LI21_LI_POR_FG",
"TBSLI21"."LI21_BIN_ID",
"TBSLI21"."LI21_TS_MRSHL",
"TBSLI33"."LI33_CI_LI_NO",
"TBSLI33"."LI33_SH_ADDR_1",
"TBSLI33"."LI33_SH_ADDR_2",
"TBSLI33"."LI33_SH_ADDR_3",
"TBSLI33"."LI33_SH_ADDR_4",
"TBSLI33"."LI33_SH_CITY_NM",
"TBSLI33"."LI33_SH_ST_NM",
"TBSLI33"."LI33_SH_ZIP_CD",
"TBSLI33"."LI33_CU_NM",
"TBSLI33"."LI33_CU_BUS_NM"
FROM   ((("CMPREPORTING"."dbo"."TBSLI33" "TBSLI33" FULL OUTER JOIN "CMPREPORTING"."dbo"."TBSLI21" "TBSLI21" ON ("TBSLI33"."LI33_BS_OR_NO"="TBSLI21"."LI21_OR_NO") AND ("TBSLI33"."LI33_BS_LI_NO"="TBSLI21"."LI21_LI_NO")) LEFT OUTER JOIN "CMPREPORTING"."dbo"."TBSOP13" "TBSOP13" ON "TBSLI21"."LI21_OP_GRP_NO"="TBSOP13"."OP13_OP_GRP_NO") LEFT OUTER JOIN "CMPREPORTING"."dbo"."TBSLI31" "TBSLI31" ON ("TBSLI21"."LI21_OR_NO"="TBSLI31"."LI31_OR_NO") AND ("TBSLI21"."LI21_LI_NO"="TBSLI31"."LI31_LI_NO")) LEFT OUTER JOIN "CMPREPORTING"."dbo"."MFG_PLANT_LI" "MFG_PLANT_LI" ON ("TBSLI21"."LI21_OR_NO"="MFG_PLANT_LI"."OR_NO") AND ("TBSLI21"."LI21_LI_NO"="MFG_PLANT_LI"."LI_NO")
WHERE   {?aSearchParam} = 1 and "MFG_PLANT_LI"."PRFR_MFG_PLANT_FLG"='Y' AND "TBSLI21"."LI21_OR_NO"=Cast( {?Search_Val} as Int)
or {?aSearchParam} = 2 and "MFG_PLANT_LI"."PRFR_MFG_PLANT_FLG"='Y' AND "TBSLI33"."LI33_CI_OR_NO"=Cast( {?Search_Val} as numeric(12,0))
or {?aSearchParam} = 3 and "MFG_PLANT_LI"."PRFR_MFG_PLANT_FLG"='Y' AND Convert( VarChar(20),"TBSLI33"."LI33_EXT_SYS_SL_OR_NO")= Convert( VarChar(20), {?Search_Val})
or {?aSearchParam} = 4 and "MFG_PLANT_LI"."PRFR_MFG_PLANT_FLG"='Y' AND Convert( VarChar(8),"TBSLI21"."LI21_OP_GRP_NO") = Convert( VarChar(8), {?GroupNo})
or {?aSearchParam} = 5 and "MFG_PLANT_LI"."PRFR_MFG_PLANT_FLG"='Y' AND Convert( VarChar(8), ("TBSOP13"."OP13_CLR_DAY" & "TBSOP13"."OP13_PP_GRP_SEQ_NO" & "TBSOP13"."OP13_CELL_ID")) = Convert( VarChar(8), {?GroupNo})
Union
SELECT "TBSLI21_HIST"."LI21_OR_NO",
"TBSLI21_HIST"."LI21_SH_DT_SCDL",
"TBSLI21_HIST"."LI21_TS_EN_ORIG",
"TBSLI21_HIST"."LI21_TS_SHIP",
"TBSLI21_HIST"."LI21_SYS_ORD_CD",
"TBSLI21_HIST"."LI21_SHIP_ID",
"TBSLI21_HIST"."LI21_WRKST_ID",
"TBSLI21_HIST"."LI21_LI_NO",
"TBSLI33_HIST"."LI33_CI_OR_NO",
"TBSLI33_HIST"."LI33_EXT_SYS_SL_OR_NO",
"TBSLI21_HIST"."LI21_OP_GRP_NO",
"TBSLI21_HIST"."LI21_LI_STAT",
"TBSOP13_HIST"."OP13_OP_GRP_STAT",
"TBSLI31_HIST"."LI31_LI_EV_DTL_TX",
"TBSLI31_HIST"."LI31_DT_EN",
"TBSLI31_HIST"."LI31_TM_EN",
"TBSLI31_HIST"."LI31_LI_EV",
"TBSLI21_HIST"."LI21_OP_WSH_FLNM",
"TBSLI21_HIST"."LI21_PR_ITF_CD",
"TBSLI21_HIST"."MFG_PLANT_CD",
"MFG_PLANT_LI_HIST"."MFG_PLANT_CD",
"TBSOP13_HIST"."OP13_OP_GRP_DSP_CD",
"TBSLI21_HIST"."LI21_LI_DSP_CD",
"TBSOP13_HIST"."OP13_CLR_DAY",
"TBSOP13_HIST"."OP13_PP_GRP_SEQ_NO",
"TBSOP13_HIST"."OP13_CELL_ID",
"MFG_PLANT_LI_HIST"."PRFR_MFG_PLANT_FLG",
"TBSLI21_HIST"."LI21_OP_GRP_PS_NO1",
"TBSLI21_HIST"."LI21_POMS_MERGE_NO",
"TBSLI31_HIST"."LI31_OP_ID",
"TBSLI21_HIST"."LI21_LI_POR_FG",
"TBSLI21_HIST"."LI21_BIN_ID",
"TBSLI21_HIST"."LI21_TS_MRSHL",
"TBSLI33_HIST"."LI33_CI_LI_NO",
"TBSLI33_HIST"."LI33_SH_ADDR_1",
"TBSLI33_HIST"."LI33_SH_ADDR_2",
"TBSLI33_HIST"."LI33_SH_ADDR_3",
"TBSLI33_HIST"."LI33_SH_ADDR_4",
"TBSLI33_HIST"."LI33_SH_CITY_NM",
"TBSLI33_HIST"."LI33_SH_ST_NM",
"TBSLI33_HIST"."LI33_SH_ZIP_CD",
"TBSLI33_HIST"."LI33_CU_NM",
"TBSLI33_HIST"."LI33_CU_BUS_NM"
FROM   ((("CMPREPORTING"."dbo"."TBSLI33_HIST" "TBSLI33_HIST" FULL OUTER JOIN "CMPREPORTING"."dbo"."TBSLI21_HIST" "TBSLI21_HIST" ON ("TBSLI33_HIST"."LI33_BS_OR_NO"="TBSLI21_HIST"."LI21_OR_NO") AND ("TBSLI33_HIST"."LI33_BS_LI_NO"="TBSLI21_HIST"."LI21_LI_NO")) LEFT OUTER JOIN "CMPREPORTING"."dbo"."TBSOP13_HIST" "TBSOP13_HIST" ON "TBSLI21_HIST"."LI21_OP_GRP_NO"="TBSOP13_HIST"."OP13_OP_GRP_NO") LEFT OUTER JOIN "CMPREPORTING"."dbo"."TBSLI31_HIST" "TBSLI31_HIST" ON ("TBSLI21_HIST"."LI21_OR_NO"="TBSLI31_HIST"."LI31_OR_NO") AND ("TBSLI21_HIST"."LI21_LI_NO"="TBSLI31_HIST"."LI31_LI_NO")) LEFT OUTER JOIN "CMPREPORTING"."dbo"."MFG_PLANT_LI_HIST" "MFG_PLANT_LI_HIST" ON ("TBSLI21_HIST"."LI21_OR_NO"="MFG_PLANT_LI_HIST"."OR_NO") AND ("TBSLI21_HIST"."LI21_LI_NO"="MFG_PLANT_LI_HIST"."LI_NO")
WHERE {?aSearchParam} = 1 and "MFG_PLANT_LI_HIST"."PRFR_MFG_PLANT_FLG"='Y' AND "TBSLI21_HIST"."LI21_OR_NO"= Cast( {?Search_Val} as Int)
or {?aSearchParam} = 2 and "MFG_PLANT_LI_HIST"."PRFR_MFG_PLANT_FLG"='Y' AND "TBSLI33_HIST"."LI33_CI_OR_NO"= Cast( {?Search_Val} as numeric(12,0))
or {?aSearchParam} = 3 and "MFG_PLANT_LI_HIST"."PRFR_MFG_PLANT_FLG"='Y' AND Convert( VarChar(20), "TBSLI33_HIST"."LI33_EXT_SYS_SL_OR_NO")= Convert( VarChar(20),{?Search_Val})
or {?aSearchParam} = 4 and "MFG_PLANT_LI_HIST"."PRFR_MFG_PLANT_FLG"='Y' AND Convert( VarChar(8),"TBSLI21_HIST"."LI21_OP_GRP_NO")= Convert( VarChar(8), {?GroupNo} )
or {?aSearchParam} = 5 and "MFG_PLANT_LI_HIST"."PRFR_MFG_PLANT_FLG"='Y' AND Convert( VarChar(8), ("TBSOP13_HIST"."OP13_CLR_DAY" & "TBSOP13_HIST"."OP13_PP_GRP_SEQ_NO" & "TBSOP13_HIST"."OP13_CELL_ID")) = Convert( VarChar(8), {?GroupNo})

This is actually a fairly easy fix - because of the way the "OR" works in SQL, you need to surround each "set" of statements in the or with parentheses. So, it would look something like this:
Where
({?aSearchParam} = 1 and "MFG_PLANT_LI"."PRFR_MFG_PLANT_FLG"='Y' AND "TBSLI21"."LI21_OR_NO"=Cast( {?Search_Val} as Int))
or
({?aSearchParam} = 2 and "MFG_PLANT_LI"."PRFR_MFG_PLANT_FLG"='Y' AND "TBSLI33"."LI33_CI_OR_NO"=Cast( {?Search_Val} as numeric(12,0)))
or
({?aSearchParam} = 3 and "MFG_PLANT_LI"."PRFR_MFG_PLANT_FLG"='Y' AND Convert( VarChar(20),"TBSLI33"."LI33_EXT_SYS_SL_OR_NO")= Convert( VarChar(20), {?Search_Val}))
or
({?aSearchParam} = 4 and "MFG_PLANT_LI"."PRFR_MFG_PLANT_FLG"='Y' AND Convert( VarChar(8),"TBSLI21"."LI21_OP_GRP_NO") = Convert( VarChar(8), {?GroupNo}))
or
({?aSearchParam} = 5 and "MFG_PLANT_LI"."PRFR_MFG_PLANT_FLG"='Y' AND Convert( VarChar(8), ("TBSOP13"."OP13_CLR_DAY" & "TBSOP13"."OP13_PP_GRP_SEQ_NO" & "TBSOP13"."OP13_CELL_ID")) = Convert( VarChar(8), {?GroupNo}))
-Dell

How to set Max Rows when I search extended attribute in Admin Setting?

When I search extended attributes in Admin Setting, the default max row is 500.
Can I change the Max rows' Setting?
Thanks

We don't have a feature config for this in the core application, however you can adjust the 500 limit using a ready report. Ready Reports is a solution pack that allows you to create saved searches in the form of reports. You can get the ready reports solution pack in the latest extensibility pack.

How to Search Multiple Folders?

I am using a new machine with 10.7.2 Lion and I'm unable to do something I used to do on 10.4.11 Tiger, that is, search multiple folders simultaneously in Finder. To be clear, in a Finerd window, I was able to hit command-f and the current folder name would appear along with a button that said "Others." Clicking that would allow me to select any number of additional folders to include in my search. There isn't an "Others" button in Lion! What happened? Did the Lion developers get Lost?

Greg,
There's one way of doing this that's even easier than before.
Use a Spotlight Search, one of the best OSX features ever. Simply press CMD-space, and you'll get a small window. Type in your search criteria, and Spotlight will automatially list all of the hits on your computer - without even pressing enter.
If you're searching, say, using Safari, CMD-F will let you search for all the hits on the site you're on, and highlight them. Press Enter to cycle through the hits, if you have any.
Otherwise, use Spotlight for your system search needs.

How to improve TREX Search experience?

Most of our users are not happy with the search results. Since the default TREX search is based on relevance, it shows all the documents matching the keywords so it's difficult to find the particular document they are looking for.
I have put few points together to see it would help to improve the search experience. I would greatly appreciate your suggestions and feedback.
1)     The default TREX search performs a full-text search in the title, the description, and the content. Add additional metadata information of the document, and customize the search interface so that the end user can search documents by topic, keywords, region, author, etc.
2)     Assign comma separated keywords in the document description while uploading. TREX finds it.
3)     Create custom properties with pre-assigned keywords. You can pick the keywords for the documents using pick lists from the custom properties or use it in the advanced search.
4)     For HTML files in the CM repository, develop a custom extractor for the META tags such as title, keywords, description, author, etc.,
5)     For MS office documents, configure the TREX python extension to extract the Dublin Core metadata. So, in the advanced search, people can search using document title, description, subject, keywords, and so on.
6)     Tweak the search interface to make it more presentable to the end user by setting tags for certain indexes such as KM, People Search, Invoice, Collaboration Rooms, and etc., So that the user can navigate between the tabs in search results.
Thanks.

TREX search can also search based on the date, author, modified date, modified by etc....
You need to add the sort priority in your search option set.   You can customize the search functionality based on your need by modifying the search option set and search component set.
Raghu

Ajax framework : how to remove the Trex search field ?

Hi community,
I am trying to remove the TRex search field in an ajax framework. As for the "normal" framework I make not visible the tool page, even in the headerless framework, but it is still displaying...
Has someone ever face this problem ?
Thanks a lot.

Hi Fabien
I am not sure if i got your question currectly
In general on the Ajax Framework page there is the masthead iview
On the masthead iview there is a property "Enable Search" that allows you to enable and disable the search box in the page.
Please try to use it
There is now search box of the framewrok in headerless window
the search box is probably part of the application.
Regards
Oz

File name to be considered while Trex Search in CV04N,

Dear Sap Gurus,
I know TREX can search and list the documents using any Word or Characters inside the original file, but i have a requirement to search the document by there File Names,i tried giving File names in CV04N Trex search window, but it is not giving any results for me,
how can i make the trex search consider the file names also while searching in CV04N,
In SAP DMS is there a standard search functionality to search the documents by there File name?
Awaiting response
Thanks and regards
Kumar

Thanks for your response,
i know we can search the documents through Classification or description details using CV04N, but
while searching any document the user wishes to fill up the details only at one field ie... the Trex search window in the CV04N screen, and he will not be interested in filling the values at the classification TAB and the description Tabs,
we need a single point of search through Trex search Window in CV04N, ie... when this Trex search field is filled appropriately,( like the classification value, Long text value,)
this values should search the documents with this Classification or Long text values in DIR and display the results,
i could not succeed in getting the trex search working with this values, is there any thing missing from DMS config????
FYI,
we have Portal Document search through DMS through DMS Connector, and in this Trex Search we could find the DMS documents using the file Names as well, but strangely the same thing is not possible through CV04N trex Search,
Thanks and regards
kumar

InDesign search multiple formats at once in find and replace

I am pretty new to InDesign and InDesign forums. I am having problems figuring out how to do this task. I am using CS6, and I have a rather large document that has a glitch in the formatting. The Latin names for species are in italics, but for some reason the space between them is not always in italics, and this is creating havoc with indexing the species. In the first name below the space is italicized, and in the second it is not, so the whole name cannot be indexed because the italics is the key to creating the index. I need to change the space between italic words to be italicized, but I cannot figure out how to use multiple format types within one find command to do this. I need to search out an italics word or wild card and un-italicized space and italics word or wild card and change it to all italics. Does anyone have any advice? I greatly appreciate your time.
Epinotia aceriella
Sparganothis pettitana
Thank You!
Maggie

The basic idea would be to do a few GREP search and replaces:
1. Search for any character at the end of a word formatted in italics.
2. Replace with that character + some symbol that isn't used in the
book, say @ (careful of email addresses)
3. Search for any character at the beginning of a word formatted in italics
4. Replace with same character as in (2)
5. Do a regular search for @ @ and change to italics formatting.
6. Delete all @
The GREP search for (1) might be:
(.)\>
The GREP replace for (2) might be:
$1@
The GREP search for (3) might be:
\<(.)
The GREP replace for (4):
@$1
etc.

Trex Search for Archive Link OAAD or OAWD Documents,

HI Sap Gurus,
Can Trex Search in the originals of documents which are stored by OAAD or OAWD Transactions,
if so how to activate the Trex Original document Search for Documents stored through OAAD or OAWD,
Thanks and regards
J Sari,

Dear Athol,
We are using SAP Content server to store our Documents from GOS and also the same Content server is used for maintaining our Documents through DMS also,
so as a standard, Trex cannot search documents maintained in content server by GOS methord and it can only search those documents which are maintained by DMS CV01N method,
pls suggest how to proceed for the development to allow Trex to search all the documents in Content server, how big is the development, is there any SAP suggested solution to be followed,
Thanks and Regards
J sari

SAF TREX search how to search multiple attributes

Similar Messages

Maybe you are looking for