Safari 2.0.4 bug : 130x320 px gap with div a object object a div

If you place the below code in a blank HTML page and view it with Safari 2.0.4, you'll see a 130 pixel vertical gap between 1 and 2, and a 320 pixel horizontal gap between 3 and 5.
1
<div>
2
<a>
3
<object>
4
</object>
5
</a>
6
</div>
7

Safari crashed, but we don't know what you were doing at the time, or what Input Managers you're running;
those are the prime cause of crashes. You should also update to 10.4.11 and Safari 3.1.1 by now; that will
alleviate some problems, too.
Go to Users/<username>/Library and create a new folder named InputManagers (Disabled). Then move all
your Input Managers into that folder and try restarting Safari and do the same things you were before the
crash to see if it does it again. Do it several times in the same session; don't rely on just one attempt meaning
that everything is fine. If everything is fine and it doesn't crash, then it's one or more of the Input Managers
that is the likely cause, and you'll have to add them back one at a time and test each time to figure out which
one is the problem.
Mulder

Similar Messages

  • IPad Safari Landscape innerHeight/outerHeight bug still not fixed in iOS 7.1.1

    iPad Safari Landscape innerHeight/outerHeight bug still not fixed in iOS 7.1.1
    No bug in Chrome or other third party browsers.
    When are Apple going to fix this bug? It's painful.
    more info here:
    http://stackoverflow.com/questions/19012135/ios-7-ipad-safari-landscape-innerhei ght-outerheight-layout-issue

    Tell Apple not other users.
    Use http://www.apple.com/feedback/ipad.html

  • Is there a workaround for the Safari "clickable hidden content" bug?

    Hi,
    I'm encountering a bug in Safari where hidden content (non-visible content hidden with the CSS attribute overflow:hidden) to be clickable. I did some googling and found other people who are having this same problem:
    http://www.dmxzone.com/forum/go/?35908
    http://archivist.incutio.com/viewlist/css-discuss/76660
    http://lists.macosforge.org/pipermail/webkit-dev/2005-November/000496.html
    But no one seems to have a workaround for this. The last post contains a reply by an Apple developer saying he checked in a bug fix for this, but his reply was posted two years ago and I'm still seeing the problem.
    Does anyone know of a workaround for this? Hacks or kludges welcome.
    Cheers,
    -bri
    Message was edited by: omega-

    Hi
    As Safari uses the WebKit structure, you may find an answer to your question at the FreeNode Network. You may also find help at the WebKit Open Source Project.

  • Scroll indicator sometimes disappears in Safari iOS 8.3 bug. (On scrollable divs using "-webkit-overflow-scrolling:touch")

    Hi,
    After updating to iOS 8.3 on an iPad Air, it seems something is wrong with the scroll indicator on scrollable divs in Safari.
    It scrolls like it should be, but randomly I just don't get to see the scroll indicator on the right side of the scrollable div.
    You can see the problem when refreshing the page, sometimes the scroll indicator is visible and sometimes it is not.
    Here is a small example, to view on an iPad/Safari: http://www.roidesrois.be/new_site/div_scroll.html
    The code used should be correct. Before the update I never saw this problem before.
    Here is an example from somebody else. http://www.quirksmode.org/css/css2/overflowscrolling.html
    I see the exact same problem there too.
    When using Chrome or Mercury on an iPad I don't see this problem, only in Safari.
    Can someone please confirm this problem or maybe has a solution for this?
    Is this a bug in Safari that needs to be solved?
    Thnx in advance,
    Kind regards.
    Lester.

    Hello to both of you.
    Don't know if this will clarify or mudle the issue but in the same platform context I have a similar issue. Don't know if you are familiar with the LaPresse App (go to AppStore and download it: it is free) but it has vertical text that begins mostly offscreen (just a small portion is visible), which you can swipe upwards and eventually beyond the top, without the tablet page height ever resizing at any moment. It behaves very similarly to an Adobe Premiere title starting off-screen at the bottom, then rolling upwards (e.g. as you would swipe, on the table), and ending off-screen over the top. That's what I'm trying to reproduce using Muse and cannot achieve. As soon as I move the text below the defined page size, Muse automatically expands that page size to accomodate the new text position. I thought of turning off vertical scrolling in the Page properties to force a static page height but the scrolling options in Tablet layout are disabled (by the way: why is that?)
    Gil

  • My safari doesn't work sometimes, but I connect with the internet.

    my safari doesn't work sometimes, but I connect with the internet. Some of the videos I can't see with the Safari browser, but I can see it with other brower. But my friend can see these videos with her safari. And I can not connect with the app store sometimes.

    Before you try to configure the settings on your Router, first thing which you need to do is, Press and hold the reset button for 60 seconds...Release the reset button...Unplug the power cable from your router, wait for 60 seconds and re-connect the power cable...
    Connect the Modem to the Linksys Router on the Internet Port and then connect your computer to the Linksys router on the LAN Port 1. On your Computer click on Start - Run - CMD and click Ok... Now in the Command Prompt window type "ipconfig" and hit enter and note down the "IP address, Subnet Mask and Default Gateway" , Now again in the Command Prompt window type "ping default gateway IP" and hit enter and check if you are getting any replies, If yes then you can login to the setup page of the configure all the settings on it from scratch. 
    If your Internet Service Provider is Cable follow this link

  • I have lost my Safari app and all the bookmarks that go with it. I have tried to download my back-up on external drive but cannot access it. Tried a start with C key held down but still no access to the back-up app.

    I have lost my Safari app and all the bookmarks that go with it. I have tried to download my back-up on external drive but cannot access it. Tried a start with C key held down but still no access to the back up app.
    Have used Superduper app. to back up and checked back-up occasionally to see if all files present  and appeared OK.
    I had previously started machine using original CD #1 to try and replace Eudora which was acting up. Did not knowingly touch Safari.
    Running iMAC System 10.4.11
    How can I successfully download from the Maxtor back-up?
    Ivan

    Further info.
    I checked the content of my other back-up and found the bookmark Bookmarks.plist in the library under Safari
    Dumped the existing copy in the computer and drag-dropped the back up. All bookmarks restored.
    Solved the Stickies problem by using Spotlight  to find file "stickiesdatabase" and did a drag- drop to replace file. All data restored.
    Re Ical data loss. Used Spotlight to find iCal document in  Library - Preferences where I found com.apple.iCal.plist in folder.
    Got ready to make change but did not immediately remove file. When I returned to Preferences folder to grab above document,
    the readable descriptors had been changed to code consisting of some upper case letters and/or single symbols!
    So now I cannot tell which is the symbol  iCal.plist
    Thanks for leading me so far, but how do I find that plist for my calendar?

  • MS SQL server is going down frequently(10 days of gap) with exception message: "A severe error occurred on the current command. The results, if any, should be discarded".

    MS SQL server is going down frequently(10 days of gap) with exception message: "A severe error occurred
    on the current command. The results, if any, should be discarded". We are facing this issue for past two month.But funny thing is server will be up automatically with out any service restart manually.  Also if we try to restart the SQL
    server service manually then SQL server will be in a dead lock situation and it will not come up even if we wait for long time. Then we should do a windows server machine restart to
    make the SQL sever up. As a suggestion from Microsoft to fix this kind of similar issue,
    we have installed service pack 3 for SQL Server. But even after we are facing same issue.
    Server Details:
    Server OS: Windows Server 2008 R2
    Two type of database servers are installed on server:
    1. MS SQL Server 2008 R2
    2. My SQL
    Also Reporting server is configured for the purpose of generating SSRS report from a dot net website.
     NOTE:Immediately after the data retrieval/save, we are closing the connection explicitly by the
    application.
    we have checked the windows event log and below are the details:
    Log Name:      Application
    Source:        ASP.NET 4.0.30319.0
    Application information:
        Application domain: /LM/W3SVC/5/ROOT-1-130718142067856406
        Trust level: Full
        Application Virtual Path: /
        Application Path: E:\WebSpaceFolder\ACSQuiK\Production\
        Machine name: DBSERVER 
     Process information:
        Process ID: 148
        Process name: w3wp.exe
        Account name: NT AUTHORITY\NETWORK SERVICE 
     Exception information:
        Exception type: SqlException
        Exception message: A severe error occurred on the current command.  The results, if any, should be discarded.
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
    Log Name:      Application
    Source:        Report Server Windows Service (MSSQLSERVER)
    Description:
    Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Report Server Windows Service (MSSQLSERVER)" />
        <EventID Qualifiers="0">107</EventID>
    Could anybody can suggest any kind of fix for this issue? Thanks in advance.

    Hi YesYemPee,
    I have tried but still not clear about your issue, I would like you provide more details information about your issue based on below points to better analysis about the issue:
    What action did you do and caused the error "A severe error occurred on the current command. The results, if any, should be discarded", did you run report on the web application or something else then the error happen?
    If you rendering the report and got the error, please try to provide us more error information in the log files which path like:
    C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\LogFiles
    If it is not the case in step1, Please try to provide SQL Server Error log(SQL Server Logs) and more details information.
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • Is anyone else having a weird bug in MobileMe gallery with volume on iOS 5

    Is anyone else having a weird bug in MobileMe gallery with volume on iOS 5? I am having a weird problem, where if I view a video I have uploaded and change the volume, I used the on-screen slider and It changed the volume but it also popped up like I was controlling it from the side. I thought that was kind of weird. If you want to see my problem, there will be a video up on Contemputech.com within a half-hour of me writing this.
    Thanks!
    Nolan

    Hello everyone!
    I'm hoping you are no longer having problems with your iPhone visual voice mail.
    I can understand how frustrating it is to not be able to access such a great feature on your iPhone.
    We did determine  customers not being able  to access Visual Voicemail on their iPhones.
    Common errors are "visual voicemail is not available" or it just keeps loading the message. 
    (In the meantime, you can still review voicemail messages by dialing *86)
    This issue should have been resolved for everyone effective 3/2/12.
    Please let me know if you are still having problems with iPhone Visual Voicemail by sending me a direct message.
    Thanks for your patience with this.
    Tamara H.
    Follow us on Twitter @VZWSupport

  • HT5678 I have problems saving pdf files in the web when I use Safari. I don't have this problem with firefox

    I have problems saving pdf files in the web when I use Safari.  I don't have this problem with firefox.

    do they save ok if Safari - Preferences - Security - Allow all other plug-ins is unchecked ?
    If so, likely an adobe or other pdf plugin
    Re-check the setting above & quit any browsers,
    Look in this folder by triple-clicking the line below, then ctrl-clicking it & choosing Services - Open
    /Library/Internet Plug-Ins/
    remove anything with pdf in the filename & test again
    Sometimes, plug-ins can be in the User Library folder :
    ~/Library/Internet Plug-Ins/

  • I just installed mongolian cyrillic keyboard and it's working just fine with safari but i can't type on Word with it. please help me?

    i just installed mongolian cyrillic keyboard and it's working just fine with safari but i can't type on Word with it. please help me?

    PS Here is a source for a keyboard.  Try it if you have not done so already
    http://m10lmac.blogspot.com/2012/12/new-mongolian-keyboard-layout.html
    For questions about why Word doesn't do something, try
    http://answers.microsoft.com/en-us/mac/forum/macword

  • Bug #81169 - Div bkgrnd color (of 1st div w/ content) not honored if cfdocument/pdf written to disk

    Bug for: Div background color (of 1st div w/ content) is not honored when cfdocument/pdf is written directly to disk.
    ==================
    Steps to reproduce
    ==================
    Run the following code with (and without) the cfdocument 'name' attribute.  Then compare both PDFs (the PDF written directly to browser, and the PDF written directly to disk)
    <cfdocument format="pdf" name="myPDF">
    <div style="background-color:#1a9cee;"></div>
    <div style="background-color:#1a9cee; border:2px solid #1a9cee;">I am the 1st div w/ content. Background color is only honored when PDF is written to browser. When PDF is written to disk, background color is near black.</div>
    <div style="background-color:#1a9cee; border:2px solid #1a9cee;">I am the 2nd div w/ content. Background color is always honored.</div>
    </cfdocument>
    <cfif structKeyExists(variables, "myPDF")>
      <cfpdf action="write" source="variables.myPDF" destination="#expandPath('./MyPDF.pdf')#" overwrite="yes" />
    </cfif>
    ==================
    Attachments
    ==================
    PDF written directly to disk: 20091214_Bug_81169_CFDocumentPDFDivBkgrndColorNotHonored_01.pdf
    PDF written directly to browser: 20091214_Bug_81169_CFDocumentPDFDivBkgrndColorNotHonored_02.pdf
    Thanks!,
    -Aaron Neff
    Btw, this bug is new to CF9.  This bug did not affect CF 8.0.1.

    Ok, if anyone else is experiencing this same issue, here is a workaround.  The issue is that when a cfdocument-generated PDF is written directly to disk, then the background color of the 1st non-empty block-display HTML element is ignored (unless there is an inline-display HTML element preceding it).  Instead, the background color is near-black.
    So, the workaround is to simply ensure an inline-display HTML element preceds the problematic block-display HTML element.  (a <span></span> will do the trick)
    Here was the original code.  Note that line #3 is the 1st non-empty HTML element, and that it is a div (block-display), and it has a background color.  If the PDF is written to disk, then the specified background color is ignored.  Instead, the background color is near-black.  Again, this does not occur when the PDF is written directly to browser.
    1| <cfdocument format="pdf" name="myPDF">
    2| <div style="background-color:#1a9cee;"></div>
    3| <div style="background-color:#1a9cee; border:2px solid #1a9cee;">I am the 1st non-empty block-display HTML element. Background color is only honored when PDF is written to browser. When PDF is written to disk, background color is near black (unless preceded by an inline-display HTML element).</div>
    4| <div style="background-color:#1a9cee; border:2px solid #1a9cee;">I am the 2nd div w/ content. Background color is always honored.</div>
    5| </cfdocument>
    6| <cfif structKeyExists(variables, "myPDF")>
    7|   <cfpdf action="write" source="variables.myPDF" destination="#expandPath('./MyPDF.pdf')#" overwrite="yes" />
    8| </cfif>
    Here is the 'fixed' code (note that "display:inline" has been added to line #2):
    1| <cfdocument format="pdf" name="myPDF">
    2| <div style="background-color:#1a9cee; display:inline;"></div>
    3| <div style="background-color:#1a9cee; border:2px solid #1a9cee;">I am the 1st non-empty block-display HTML element. Background color is only honored when PDF is written to browser. When PDF is written to disk, background color is near black (unless preceded by an inline-display HTML element).</div>
    4| <div style="background-color:#1a9cee; border:2px solid #1a9cee;">I am the 2nd div w/ content. Background color is always honored.</div>
    5| </cfdocument>
    6| <cfif structKeyExists(variables, "myPDF")>
    7|   <cfpdf action="write" source="variables.myPDF" destination="#expandPath('./MyPDF.pdf')#" overwrite="yes" />
    8| </cfif>
    magical

  • [svn] 4793: Fix bug SDK-17734 Path with width and height set different than path data has incorrect bounds

    Revision: 4793
    Author: [email protected]
    Date: 2009-02-02 11:20:06 -0800 (Mon, 02 Feb 2009)
    Log Message:
    Fix bug SDK-17734 Path with width and height set different than path data has incorrect bounds
    Fix: When calculating the bounds position we should take into account the implicit scaling factor actualSize/naturalSize. Also did some refactoring, getting rid of the protected method calculateTopLeft.
    QE Notes: None
    Doc Notes: None
    Bugs: SDK-17734
    Reviewer: Ryan
    tests: mustella gumbo/layout/GraphicElement
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-17734
    http://bugs.adobe.com/jira/browse/SDK-17734
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/graphics/Ellipse.as
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/graphics/Path.as
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/graphics/graphicsClasses/GraphicElement.a s

    Thank you so much for replying.
    Yes I have removed and reinstalled WMP.
    I had good results with the PD6 application installed on the default path onto the C: drive with the one exception that if the application was launched by accident and the user data path was not available, the PD6 application would blow away my custom user path registry settings. Now that I know what they are I have made a .reg file to repair my registry to my desired user data paths.
    Installing the application on the removable drive appeared to help prevent me from launching the application by accident and overwriting my registry with default user paths.
    So which is the less of the two evils?
    If the application directory is not available, windows media player still tries to launch the .msi for installing PD6.
    If I install the application to the C: drive but the user data to the removable drive, launching the PD6 application without the user data drive will still corrupt my registry settings for a user data path.
    Both these issues seem like a logical (if not easy) fix that should be done in the PD6 application and installation package. I mean really, cannot anyone tell me why windows media player is checking the PD6 application directory? Why in PD4 did we have an option control for setting the user data path from the PD4 application? Why is this option not in the PD6 application, just the installer?
    I am given a choice during installation to move the user data to another non default location. Why else would this be provided if not to accommodate my kind of request to store the user data into an alternate location other than “My Document”. Certainly Palm is not trying to force the users on how to protect and store their personal data?
    Post relates to: Centro (Verizon)

  • Safari browser seems to slow down when working with my wifi ASUS AC 68U router

    safari browser seems to slow down when working with my wifi ASUS AC 68U router - any ideas on why?

    Is your problem with Safari on the iPad, or some MacBook Air?
    Are you sure that the ASUS firmware is tested with the device having trouble and its operating system?
    Note: MacBook Airs do not run iOS.  They run Mac OS X, Windows or Linux.

  • [BUG]rb_gc_mark() unknown data type 0x0(0x1810340) non object Error

    I reference Sigar in my code, like this
          sigar = Sigar.new
          fs_list = sigar.file_system_list
    It occur error when sigar call file_system_list method,
    the error decription :
    /var/vcap/packages/cloud_agent/lib/cloud_agent/disk.rb:28: [BUG] rb_gc_mark(): unknown data type 0x10(0x1ca9920) non object
    ruby 1.9.3p448 (2013-06-27 revision 41675) [x86_64-linux]
    -- Control frame information -----------------------------------------------
    c:0018 p:---- s:0075 b:0075 l:000074 d:000074 CFUNC  :file_system_list
    c:0017 p:0029 s:0072 b:0072 l:000071 d:000071 METHOD /var/vcap/packages/cloud_agent/lib/cloud_agent/disk.rb:28
    c:0016 p:0017 s:0064 b:0062 l:000061 d:000061 METHOD /var/vcap/packages/cloud_agent/lib/cloud_agent/disk.rb:14
    c:0015 p:0063 s:0056 b:0056 l:000055 d:000055 METHOD /var/vcap/packages/cloud_agent/lib/cloud_agent/heartbeat.rb:60
    c:0014 p:0093 s:0046 b:0044 l:000043 d:000043 METHOD /var/vcap/packages/cloud_agent/lib/cloud_agent/heartbeat.rb:26
    c:0013 p:0062 s:0041 b:0041 l:000040 d:000040 METHOD /var/vcap/packages/cloud_agent/lib/cloud_agent/heartbeat_processor.rb:32
    c:0012 p:0009 s:0037 b:0037 l:000a10 d:000036 BLOCK  /var/vcap/packages/cloud_agent/lib/cloud_agent/heartbeat_processor.rb:19
    c:0011 p:---- s:0035 b:0035 l:000034 d:000034 FINISH
    c:0010 p:---- s:0033 b:0033 l:000032 d:000032 CFUNC  :call
    c:0009 p:0025 s:0030 b:0030 l:000029 d:000029 METHOD /usr/local/lib/ruby/gems/1.9.1/gems/eventmachine-0.12.10/lib/em/timers.rb:51
    c:0008 p:---- s:0027 b:0027 l:000026 d:000026 FINISH
    c:0007 p:---- s:0025 b:0025 l:000024 d:000024 CFUNC  :call
    c:0006 p:---- s:0023 b:0023 l:000022 d:000022 CFUNC  :run_machine
    c:0005 p:0248 s:0020 b:0020 l:000019 d:000019 METHOD /usr/local/lib/ruby/gems/1.9.1/gems/eventmachine-0.12.10/lib/eventmachine.rb:256
    c:0004 p:0129 s:0013 b:0013 l:000db0 d:000db0 METHOD /var/vcap/packages/cloud_agent/lib/cloud_agent/runner.rb:45
    c:0003 p:0206 s:0009 b:0009 l:002148 d:001660 EVAL   /var/vcap/packages/cloud_agent/bin/cloud_agent:29
    c:0002 p:---- s:0004 b:0004 l:000003 d:000003 FINISH
    c:0001 p:0000 s:0002 b:0002 l:002148 d:002148 TOP
    -- Ruby level backtrace information ----------------------------------------
    /var/vcap/packages/cloud_agent/bin/cloud_agent:29:in `<main>'
    /var/vcap/packages/cloud_agent/lib/cloud_agent/runner.rb:45:in `run'
    /usr/local/lib/ruby/gems/1.9.1/gems/eventmachine-0.12.10/lib/eventmachine.rb:256:in `run'
    /usr/local/lib/ruby/gems/1.9.1/gems/eventmachine-0.12.10/lib/eventmachine.rb:256:in `run_machine'
    /usr/local/lib/ruby/gems/1.9.1/gems/eventmachine-0.12.10/lib/eventmachine.rb:256:in `call'
    /usr/local/lib/ruby/gems/1.9.1/gems/eventmachine-0.12.10/lib/em/timers.rb:51:in `fire'
    /usr/local/lib/ruby/gems/1.9.1/gems/eventmachine-0.12.10/lib/em/timers.rb:51:in `call'
    /var/vcap/packages/cloud_agent/lib/cloud_agent/heartbeat_processor.rb:19:in `block in enable'
    /var/vcap/packages/cloud_agent/lib/cloud_agent/heartbeat_processor.rb:32:in `beat'
    /var/vcap/packages/cloud_agent/lib/cloud_agent/heartbeat.rb:26:in `send_via_mbus'
    /var/vcap/packages/cloud_agent/lib/cloud_agent/heartbeat.rb:60:in `heartbeat_payload'
    /var/vcap/packages/cloud_agent/lib/cloud_agent/disk.rb:14:in `get_usage'
    /var/vcap/packages/cloud_agent/lib/cloud_agent/disk.rb:28:in `fs_usage_safe'
    /var/vcap/packages/cloud_agent/lib/cloud_agent/disk.rb:28:in `file_system_list'
    -- C level backtrace information -------------------------------------------
    *** glibc detected *** ruby: malloc(): smallbin double linked list corrupted: 0x0000000001b7c260 ***
    sometimes it happen and sometimes not,the versiong of sigar is 0.7.2,ruby is 1.9.3p448, i could solve this probelm  although i spent some days on this probem.
    i will appericate you suggestion

    I thik it is connected with Garbage Collector,I Close the GC(GC.disable),then i create a Sigar object,continuly, i open GC(GC.enable),it seem that it work well now,is there some wrong with the Sigar Gem package?

  • Bug in ResultSet#getDate() with ojdbc7-12.1.0.1

    As "documented" here java - ResultSet#getDate() semantics - Stack Overflow there seems to be a bug in ResultSet#getDate() with ojdbc7-12.1.0.1.
    The java.sql.Date condition
    To conform with the definition of SQL DATE, the millisecond values wrapped by a java.sql.Date instance must be 'normalized' by setting the hours, minutes, seconds, and milliseconds to zero
    is violated.
    How can we report that to Oracle?

    Hello Hwang
    1/ I don't know for your first question. Have you checked all the RUEI rpm prerequisites? One should be missing probably.
    2/ One solutions consists of installing and configuring Squid proxy on the RUEI server. Then you can use your own browser with ruei server as a proxy and surf. You also need to tweak RUEI to collect traffic within the right network card.
    as $RUEI_USER :
    execsql config_set_profile_value wg profile_wg_localhost_1 config ForceInterface add eth0
    replace wg by the name of your profle (probably wg anyay) and eth0 by the proper network card (also eth0 probably).
    GL & HF
    JB

Maybe you are looking for

  • Post .mac site to another domain name still on mac server?

    I have both a domain name that is .mac and a .biz url. I do not have another server to upload to (I just own the domain name), and would like to use my .mac website designed using iweb '06 v.1.1.2 and load it on the mac server but have the .biz url b

  • Quicktime Pro 7 Image Sequence Fail with Leopard

    This was a previous topic which has been archived. I want to reopen it. I recently upgraded from OS 10.5 to Leopard 10.6.6. I installed Quicktime Pro 7, which worked without issue before in 10.5. Now, I can no longer import an image sequence to creat

  • How can I read the active (plugged in) DAQs and then send that to the device name input on DAQ assist?

    I have a system property node for daqmx but it does not let me change it to read when i right click on it. I am trying to have my program detect the name of the daq that is plugged in to the PC and then send that to daq assistant so that it will run

  • 3 beeps and no video

    Occasionally when starting my system (MSI KT6V-LSR, Barton 2600+, 512MB Kingston Valueram DDR400) I get 3 beeps and no video. Any ideas why?

  • Call property with namespace in Proxy object

    Hi all, As you know, one can extends Proxy object to modify the behavior of calling a property. My question is if my property has a namespace with it, can i still access it through the Proxy object? If yes, how? e.g. only sudo code, may not work clas