Safari 5.1 displaying blank page

After installing Lion, when going to most websites, the page apears for a brief moment then it goes away and a blank page is displayed. Does not happen with every website, e.g., apple.com works fine. Microsoft.com works fine also. MBUSA.com goes blank after flashing on screen. skype.com does not work. Is it possible that Safari is not supporting Flash?
Any help will be appreciated! I though something this fundamental would have been discovered by Apple prior to release! I shouldn't have to do anything to display a web page. This is unlike Apple and more like Microsoft!

i'm having difficulty, as well with about 95% of my sites. i attempted the url you suggested earlier and it loaded quickly.
my solution is hitting the 'reload' button and it works 95% of the time.
however, this is a fine temporary fix, but i have to say that it's quite frustrating. i'm thinking this started happening a couple of weeks ago. couldn't tell you why.

Similar Messages

When I open safari, I get a blank page and the beach ball.

When I open safari, I get a blank page and the beach ball. If I try to go to a website, it will load up to a certain point sometimes—the .com of www.facebook.com for instance—but other times, nothing at all.
I've fixed this once before by deleting some files in the library folder—extensions & preferences I believe—and choosing not to have plug-ins selected, then restarting the whole computer—rather than just safari. It will work fine for a day, or maybe 3 at the most, before I have to repeat the process all over again. I'm sure it's because I usually put plug-ins back on once I get it to work, because you can't really use the internet without using plug-ins. But I'm using Chrome right now, as I do when I'm too lazy or too in a rush to try the whole process of getting safari to work again, and I don't have a single issue with it.
My question is really, what plug-in could cause this to happen repeatedly? It's not like I'm going to websites that may have malware on them. I spend most of my day going to some of the most visited websites on the internet.
Is there a known bug out there, because Java has been overrunning concurrently with this happening. It's CPU % runs around 100. I quit the process, but it doesn't change anything. So, other than the fan turning on, I have not had any popup telling me that safari has crashed, that I'm not connected to the internet, or that something went horribly, horribly wrong. I'm pretty sure Safari things it's running fine, but it's not.
Thanks in advance.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

My safari opens with a blank page and closes back. What should I do?

My safari opens with a blank page and closes back. What should I do

Hi there,
I would recommed trying this: force close the Safari application and then reset the iPhone.
-Griff W.

Safari displays blank pages for some sites

MBP 15 inch. mid-2014
OS X Yosemite 10.10.1
Safari Version 8.0.2 (10600.2.5)
Some pages, sometimes on Apple's on support site simply display as blank pages. The same page displays perfectly on Firefox or Chrome. What is this strange behaviour? For example, this link: http://support.apple.com/kb/PH15327 shows a completely blank page. See: http://i.imgur.com/PRPWgus.png
The same site displays without problem in Firefox:
http://i.imgur.com/82lEuaF.png
I have no extensions installed in Safari. JS is enabled, all settings are default. This is a fresh and clean install of Yosemite. No anti-virus installed.
What's going on? Any pointers will be appreciated. Thanks.

As an aside, and I don't have specific data for this, but Safari does seem to load some other pages so slowly, it's annoying to the extreme.
How can I debug this? (The blank page issue.)

My safari won't display home page

My safari won't display my webpage.Just blank.But firefox is fine.Wonder why? I tried the reset on safari but it does nothing at all..Once my safari icon moved to the right all by itself to the right side of the dock.Why? Anyone.

Safari: Mac OS & System Software: Apple Support Communities

Safari doesn't display php page, Firefox does

Is there a known issue with Safari not displaying certain php content? My college uses a php database to show schedules and grades. Safari doesn't display anything other than the URL in the page window when the page loads. Firefox displays the content and allows all form completion functionality.
The school's product is Jenzabar's Poise (PX) Aacademic database.
It has been this way for the last few updates - I keep hoping that a Safari update will repair the issue but alas, that doesn't seem to happen.
I'd prefer Safari because compared to it Firefox is dog slow.

Please contact or have your IT dept contact Tom at ESP to provide more information related to your problem. ESP provides support for the Jenzabar PX product in Texas. Thanks - Tom

MX2004 suddenly displaying blank pages

Hello all
I have been using MX2004 at a very basic level for some years, with no problems at all. When I say basic, I mean just editing page text and perhaps adding new pages to our company website. Anything else is done by our agency, which has worked well for some time.
Now, for some reason, when I connect to our web host server, I can 'get' the entire site and have a full folder list, but when I try and open a page, it just shows blank in all three view-types. The actual web site is fine though. This is very vexing! our agency don't have any problems their end (thankfully) - it just seems to be me.
I've uninstalled MX2004 and then re-installed with the latest updates, but still no joy. I've also deleted all the files from my local machine before 'getting' the site again - only to have the same issue. The ONLY thing that recently changed was the host company moving servers - but I've had lengthy conversations with them and they can see the 'data' on the server (I guess hence a live website), and I can connect to it with no problem. I don't know about 'putting', as I don't want to test it and upload a blank page!
One thing I have noticed is that the download progress box shows the name of the file and size (eg index 0 of 5000 bytes), and although there is activity the actual transferred bytes don;t seem to increase - they stay at '0 of 5000' (for example) then move onto the next file.
I'm really at a loss here, and any help or suggestions (apart from 'smash it with a hammer, which I've already though of) would be welcome. Thanks in advance!

The most common cause of Display view problems is invalid code. Your linked page has a measure share of that!
Please before doing anything else, correct as many of these errors as you can (including your misused Library item! You cannot apply behaviors to a Library item after it has been created. Doing so results in multiple instances of <body> tags on your page as you can see.).
http://validator.w3.org/unicorn/check?ucn_uri=http://www.first4tradesinsurance.co.uk/elto. html&ucn_task=conformance

Displays blank page when tried to access ORACLE Application Server Control

Hi,
I have successfully installed the Oracle SOA Suite using advance installation.
But when tried to open ORACLE APPLICATION SERVER CONTROL by following the below path.
start-> programs-> oracle-soa->ORACLE APPLICATION SERVER CONTROL, It displays a blank IE page.
But when tried to open BPEL control or WSM control or ESB control, it takes me to the login page.
Note: Started the SOA suite and the status of ASG component in the Start SOA page says Down.Does this affect in anyways?
Would appreciate if anyone could throw some light on this.

Hi All,
I started reinstalling SOA suite and while installation, I encounter below warning.
"A DHCP configuration was detected on this host" The installer also detected that the localhost name and network hostname differ. please resolve the networking issues by reffering the "Installing on DHCP computers" section in the installation guide."
Note: Doing installation in the server.
Wondering this could be the cause for displaying blank Application Server Control page.
And here is, what it says in the installation guide.
Note this limitation when running Oracle Application Server on DHCP computers: Oracle Application Server instances on DHCP computers cannot communicate with other instances running on other computers. For example, you cannot have OracleAS Infrastructure on one computer and a middle tier on another computer if any one of those computers uses DHCP. All the instances that need to communicate with each other need to run on the same computer. There are no limitations on clients: clients from other computers can access the instances running on the DHCP computer, as long as the client computer can resolve the DHCP computer on the network.
The solution for this is installing loopback adapter. But the catch is, I have few webmethods running on the server. Wondering about the effects of Loop back adadpter on webmethods. Please someone throw some light.
Regards
jude.

QM Desktop - Report tab displays blank page

Hi all,
I'm currently running UCCX7.0(1) with QM2.7(3) and i'm facing the following issue.
Thru QM Desktop - Report tab, an IE page will be displayed to show the available reports that we wish to run. It's trying to launch the following link https://<ip.address>:8448/QMR/Login?signature=49B7E14D173A2...E10D664 However a blank page is being displayed.
I remember seeing this a while back where it's something to do with the report templates, files, etc missing / not installed correctly.
a) which folder is storing the report files?
b) is there a way to load the missing files without reinstallation?
c) any other reason why this is happening?
Thanks!
-JT-

Quick update
I manually change the url from :8448/QMR/xxx">https://:8448/QMR/xxx to :8088/QMR/xxxx">http://:8088/QMR/xxxx and this time the QM Reporting System page is displaying according.
I don't believe there was any option during install/postinstall that enable us to specify if we want to use SSL or not. Any ideas?
Thanks!
-JT-

My ipad safari keeps redirecting to blank pages

Hi
My ipad browser (Safari) has started redirecting to blank pages
It did not do this until recently and now does it from many websites including familiar ones that I use often
I have tried clearing history, cookies etc
Also tried restarting
Also tried a reset
None of these solutions have helped.
I have seen the problem reported by others - but so far, no solution to the problem
This feels like one of those ad-redirect viruses. Is there a way to get rid of it?

Hello zeldaj,
Thank you for the details of the issue you are experiencing with Safari on your iPad. If you are experiencing the issue when using Wi-Fi I recommend following the steps in the sections titled "Resolution" and "Unable to access the Internet while connected to Wi-Fi" in the article below:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
If you are not able to access the Internet when connected to a cellular network, I recommend the following article:
iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection
http://support.apple.com/kb/TS4249
Thank you for using Apple Support Communities.
Best,
Sheila M.

OWA 2007 not displaying (blank page)

Hi there..
I also had this problem, took a while to figure it out..
At first the page would not load and there would be a yellow exclamation mark in the bottom left corner, if you click that it would say “syntax error on line 7 of login.aspx” or something to that effect. After trying may things, I removed and then re-created the OWA virtual directory in IIS using . After this, the yellow exclamation mark in the bottom left corner went away and you were presented with a blank white page.
After much search around for some log file or explanation for why this was happening, I once again recreated the OWA virtual directory, checked all rights and permissions and still the blank white page.
In absolute desperation, I looked at the code in the source code for the OWA site, here are some of the relevant bits:



<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; CHARSET=utf-8">
<meta name="Robots" content="NOINDEX, NOFOLLOW">
<title>Microsoft Exchange - Outlook Web Access</title>
<link type="text/css" rel="stylesheet" href="/owa/8.0.709.0/themes/base/logon.css">
<link type="text/css" rel="stylesheet" href="/owa/8.0.709.0/themes/base/owafont.css">
<script type="text/javascript" src="/owa/8.0.709.0/scripts/premium/flogon.js"></script>
Compared to another server of mine:



<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; CHARSET=utf-8">
<meta name="Robots" content="NOINDEX, NOFOLLOW">
<title>Microsoft Exchange - Outlook Web Access</title>
<link type="text/css" rel="stylesheet" href="/owa/8.0.685.24/themes/base/logon.css">
<link type="text/css" rel="stylesheet" href="/owa/8.0.685.24/themes/base/owafont.css">
<script type="text/javascript" src="/owa/8.0.685.24/scripts/premium/flogon.js"></script>
Notice the difference in the paths.. the OWA virtual directory looks like this: (http://www.g7web.net/downloads/owa1.jpg)
Perhaps a dodgy update on the 29th or something, whatever the reason the files in the 8.0.709.0 folder don’t seem to be working, so, I used the files from the 8.0.685.24 folder and copied them into the 8.0.709.0 folder, now everything works!
Not sure what update of patch caused the problem, will do some more investigation into it.
Hope this helps someone.
Chris

Troubleshooting Ex-01
Date: 5-5-2011
Platform: Exchange server 2007 SP3 on Windows server 2008 R2 std. edition.
Domain name: Python.com
DC name: cobra
FQDN: cobra.Python.com
Setup: Exchange server 2007 SP3 installed on the domain controller with DNS too.
OWA address:
http://cobra.python.com/owa/
Error aroused:
While trying to open the mail page using the client Outlook
Web Access using the above mentioned URL a blank page is displayed with a yellow exclamatory mark on the left side of the status bar. The details of the error code as follows:
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727;
.NET CLR 3.5.30729; .NET CLR 3.0.30729; InfoPath.3)
Timestamp: Thu, 5 May 2011 19:43:12 UTC
Message: Syntax error
Line: 6
Char: 1
Code: 0
URI:
https://localhost/owa/8.3.137.0/scripts/premium/flogon.js
Solution:
1. Restart all the services of IIS and Exchange server.
2. Go to IIS Manager and follow the path
à
IIS – Default Web Site – OWA – 8.3.137.0
3. Double click on Authentication – enable anonymous authentication.
4. Again restart the services and try to access OWA.
Refer the following link
http://my-technet.com/index.php/microsoft/exchange/exchange-2007/blank-owa-page-after-installing-exchange-rollup-patch/comment-page-1/#comment-113
Kishore Bitra

Safari back button showing blank page

Since upgrade to 4.2 I have noticed a problem using google in safari.
From www.google.com, search for something and following any result link. Hit the Back button to return back to the google result page and it's always a blank page, annoying. Anyone else getting same problem?
Adie
Message was edited by: AdieBryer

Same thing with my 64GB WIFI/3G iPad after ios 4.2.1 update. However, with me, it is seemingly on a random basis 20-30% of the time.
Google search---> search results----> view one of the search results----> back button----> EMPTY PAGE.
However, hitting the reload icon in URL bar on the empty page brings back search results, so livable.

Crystal report viewer are displaying blank page after deploying in web server

Dear friends,
                   i have designed crystal report (in VS2010 & CRRuntime_64bit_13_0_6 installed in web server) it's working fine in local machine even web server also but in http://localhost, if i change from localhost to my domain name or local IP address(like http://192.168.1.71) then it's getting blank page.
but same report if i open in pdf format it's working fine.
I have tried the following one. But this is not working for me.
Copy the entire Crystal Report Support folder
C:\inetpub\wwwroot\aspnet_client\system_web\4_0_30319\crystalreportviewers13
in web.config, the below code also added.
<sectionGroup name="businessObjects">
      <sectionGroup name="crystalReports">
        <section name="crystalReportViewer" type="System.Configuration.NameValueSectionHandler" />
      </sectionGroup>
    </sectionGroup>
<crystalReportViewer>
<add key="resourceURI" value="~/crystalreportviewers13"/>
</crystalReportViewer>
please suggest me some solutions to resolve this issues...
Regards,
Manikandan.V

Have a look at this blog for how to configure the viewer:
Visual Studio 2012 Crystal Report not working on Windows Server 2012/ 0x800a1391 &#8211; JavaScript runtime error: &…
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Crystal report viewer 13 are displaying blank page after deploying in web server

Dear friends, i have designed crystal report (in VS2012 & CRRuntime_32bit_13_0_8 installed in web server) it's working fine in machine VS2012, but when deploying in web server (Windows Server 2008 R2 64bit) it's getting blank page.
I have read the http://adilmca.wordpress.com/2013/04/08/visual-studio-2012-crystal-report-not-working-on-windows-server-2012-0x800a1391-javascript-runtime-error-bobj-is-undefined/. But this is not working for me.
I have copy the entire Crystal Report Support folder : C:\inetpub\wwwroot\aspnet_client\system_web\4_0_30319\crystalreportviewers13
Please suggest me some solutions to resolve this issues...
Regards, Stefano S.

There is something "deeper" happening here (unless you're using dome old version of IIS (v. 6, etc.))... I think logging the app will help. I'd use Process Monitor first - see if you get any "Access Denied" messages. An http sniffing utility like Fiddler may also provide useful info.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Apache displaying blank pages

I'm trying to access Apache on my server, and when I go to the server's IP address, I only see a blank page. I get no errors, and the browser acts as if it is getting a proper response from the server. However, I see nothing on the screen. I haven't made and configuration changes. Any thoughts?

Here is the latest set of entries from /var/log/httpd/error_log:
[Mon Mar 27 12:03:08 2006] [warn] Init: Session Cache is not configured [hint: SSLSessionCache]
[Mon Mar 27 12:03:08 2006] [notice] Digest: generating secret for digest authentication ...
[Mon Mar 27 12:03:09 2006] [notice] Digest: done
[Mon Mar 27 12:03:10 2006] [notice] Apache configured -- resuming normal operations
[Mon Mar 27 13:26:27 2006] [error] [client 192.168.15.110] File does not exist: /var/www/vhcs2/gui/favicon.ico
There are no other errors listed for the other dates and times in that file. As for /var/log/httpd/access_log, here's what I find:
192.168.15.110 - - [26/Mar/2006:17:41:56 -0500] "GET /vhcs2/ HTTP/1.1" 200 125
192.168.15.110 - - [26/Mar/2006:19:23:12 -0500] "GET / HTTP/1.1" 200 125
192.168.15.110 - - [26/Mar/2006:19:23:12 -0500] "GET /favicon.ico HTTP/1.1" 404 2152
192.168.15.110 - - [26/Mar/2006:19:23:15 -0500] "GET /vhcs2 HTTP/1.1" 301 300
192.168.15.110 - - [26/Mar/2006:19:23:15 -0500] "GET /vhcs2/ HTTP/1.1" 200 125
192.168.15.110 - - [27/Mar/2006:13:26:27 -0500] "GET / HTTP/1.1" 200 125
192.168.15.110 - - [27/Mar/2006:13:26:27 -0500] "GET /favicon.ico HTTP/1.1" 404 2152
Again, there are no other entries beyond these for the other dates and times in that file. I'm not seeing anything that jumps out at me as an obvious reason for error.

Safari 5.1 displaying blank page

Similar Messages

Maybe you are looking for