Safari users see my web pages as blank, until they click the screen

Our company web page works well in Internet Explorer and Firefox, but using Safari some pages intially appear blank until they are clicked on. Once the user clicks in the safari window, the page loads instantly.
The pages that appear blank seem to vary from user to user. On this mac with Safari 1.3.2, it rarely happens - only when I click on a thumbnail to view the full size image. On another mac running Safari 2.0.3, it happens on every single page.
I created the site with another co-worker using Dreamweaver, but both of us were learning as we went along. A friendly web developer I ran into suggested the problem might be to do with using 'padding' in our css and 'cellspacing' in our tables. We used both these to define the look of the universal grid we use on all our pages.
If this is the case, then it would seem to require rewriting every one of our web pages so that they don't use the offending system, but still look the same.
The website in question: www.birdsportchmouthrussum.com
Does anyone here know what is causing the problem? Was this developer correct? Is there a simple way to correct it? I really would not like to have to re-write all our pages. I'm not even sure how to accomplish the look we want by another method.
Where else can I look to for help and advice on this issue?
Thanks,
Adam
iBook, PowerPC G5, Mac Mini Mac OS X (10.3.9)

Tom,
Thanks for replying. The problem does not occur when I follow your link - which you believe would suggest it lies with frameset forwarding.
After a quick google to find out what frameset forwarding is, it seems I should switch to a redirect forwarding instead? What would you advise? \
I am relieved the problem is not to do with the code. I was worried I would have to re-write the code.
Thanks,
Adam

Similar Messages

Some pages appear blank until I refresh the page then it displays normally

When selecting some websites the page is blank until I refresh.

This also happens to me (on Linux), usually when switching back to a tab which had already been displayed properly before. Suddenly the page is blank and the page must be reloaded manually.

Can I create an application using APEX that users see different web pages?

I would like to create one application that different users are allowed to see only certain web pages based on the available data. For example, let's say that my application consists of 5 report pages and each report page is associated with a particular table or view on the system. If only 2 tables exist on the system, users should only see the two report pages associated with the 2 tables and they should not see the other 3 report pages associated with the other 3 tables.
If I provide another table, the application should then allow the associated report page to be used.
Can I do this with APEX? If so, how?
Thanks,
RJ

How about creating authorization schemes that are based upon a simple exists -
select 1 from user_tables where table_name = 'EMP'
and then you can associate that authorization scheme with your pages, list items, whatever you need. You can have your authorization scheme evaluated just once per session so it will be very speedy.
I am sure there are lots of ways to solve this one -
-- Sharon

Two different users see different web page of ssl vpn

can i achieve this ？

Yes, that can be done. In the "Customization" part of the ASDM you can change nearly anything what controls the look and feel of the portal page. The customizations can then be assigned to your group-policy.
If you also want to have different login-pages, then you need to apply the customization to the connection-profile and the different user-groups need to use different URLs to access these profiles.
Sent from Cisco Technical Support iPad App

Safari will not open web pages on my Ipad3

In General Settings, it says there is no Network Available. How do I fix this?

Thank You Demo for your reply. To answer your questions:
Yes, my wireless WiFi is on. It is working because I am using it on my laptop now to reply to you.
I only use my network in my home and it works.
I must have something set wrong on my Ipad3 Settings?
Whenever I try to use Safari, I get the message: Safari cannot open this web page.
Also, I have disconnected the Router power (thinking the Router was bad), waited a minute, and reconnected the power. It doesn't fix anything regarding my Ipad3.
Does this help you determine a possible solution? I hope so! Thanks anyway for your time and effort, if not!

Web pages load blank white screens

Why do some web pages load blank white screens, usually after a home page has loaded correctly but further pages wont open. Ive changed browsers but still get the same problem.

Try a different DNS server...
Open System Preferences / Preferences then select the Network tab. Click the Advanced tab then click the DNS tab.
Click +
Enter these addresses exactly as you see them here.
208.67.222.222
Click +
208.67.220.220
Then click OK.
Try a browser.

A private web screen shows up when I close down apps on my ipad, but I don't want to see that web page EVER. It is a private "incognito" Skype number that I don't want ANYONE to see.

A private web screen shows up when I close down apps on my ipad, but I don't want to see that web page EVER. It is a private "incognito" Skype number that I don't want ANYONE to see.

Yeah, I'm 95% sure that I did that after I closed that Skype, so I was a bit shocked when I saw that screen pop up later :/

How can I have Safari save my opened web pages when I quit so that when I open next time they will be there?

How can I have Safari save my opened web pages when I quit so that when I open next time they will be there? I can do that in Firefox automatically, but can't seem to find how to do it in Safari. I'm thinking maybe it's just now possible yet?

From your Safari menu bar click History / Reopen All Windows from Last Session.
Or..
Glims can re open tabs from a previous session if that helps.
http://www.machangout.com/
Compatible with Snow Leopard v10.6 and Safari 5+ and it's free.

How do I do Firefox finish load a certain website,its status is DONE but the web page is blank?

How do I do Firefox finish load a certain website,its status is DONE but the web page is blank?
I used to search on www.tuitalk.com. At that time, there was no problem. But now the website is blank whenever I try to load this website. It appears blank page and its status is DONE. Plz, help me.
== URL of affected sites ==
http://www.tuitalk.com

This article maybe helps to you
* https://support.mozilla.com/en-US/kb/Removing%20the%20Search%20Helper%20Extension%20and%20Bing%20Bar

Every time I try to open a new web page a window pops up saying the certificate for the page is invalid?? It won't let me on my emails or Facebook

Every time I try to open a new web page a window pops up saying the certificate for the page is invalid?? It won't let me on my emails or Facebook

This could be a complicated problem to solve, as there are several possible causes for it.
Back up all data, then take each of the following steps that you haven't already taken. Stop when the problem is resolved.
Step 1
From the menu bar, select
           ▹ System Preferences... ▹ Date & Time
Select the Time Zone tab in the preference pane that opens and check that the time zone matches your location. Then select the Date & Time tab. Check that the data and time shown (including the year) are correct, and correct them if not.
Check the box marked
          Set date and time automatically
if it's not already checked, and select one of the Apple time servers from the menu next to it.
Step 2
Start up in safe mode and log in to the account with the problem.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
If the problem is not reproducible in safe mode, then it's caused by third-party "anti-virus" or "security" software. If you know what that software is, remove it as directed by the developer after backing up all data. If you don't know what it is, ask for instructions.
Step 3
Triple-click anywhere in the line below on this page to select it:
/System/Library/Keychains/SystemCACertificates.keychain
Right-click or control-click the highlighted line and select
          Services ▹ Show Info
from the contextual menu.* An Info dialog should open. The dialog should show "You can only read" in the Sharing & Permissions section.
Repeat with this line:
/System/Library/Keychains/SystemRootCertificates.keychain
If instead of the Info dialog, you get a message that either file can't be found, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it by pressing command-V. Select the line you just pasted and continue as above.
Step 4
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the upper left corner of the window, you should see a list headed Keychains. If not, click the button in the lower left corner that looks like a triangle inside a square.
In the Keychains list, there should be items named System and System Roots. If not, select
          File ▹ Add Keychain
from the menu bar and add the following items:
/Library/Keychains/System.keychain
/System/Library/Keychains/SystemRootCertificates.keychain
Open the View menu in the menu bar. If one of the items in the menu is
          Show Expired Certificates
select it. Otherwise it will show
          Hide Expired Certificates
which is what you want.
From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu labeled
          Secure Sockets Layer (SSL)
select
          no value specified
Close the inspection window. You'll be prompted for your administrator password to update the settings.
Now open the same inspection window again, and select
          When using this certificate: Use System Defaults
Save the change in the same way as before.
Revert all the certificates with non-default trust settings. Never again change any of those settings.
Step 5
Select My Certificates from the Category list. From the list of certificates shown, delete any that are marked with a red X as expired or invalid.
Export all remaining certificates, delete them from the keychain, and reimport. For instructions, select
          Help ▹ Keychain Access Help
from the menu bar and search for the term "export" in the help window. Export each certificate as an individual file; don't combine them into one big file.
Step 6
From the menu bar, select
          Keychain Access ▹ Preferences... ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Step 7
Triple-click anywhere in the line of text below on this page to select it:
/var/db/crls
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "crls" should open. Move all the files in that folder to the Trash. You’ll be prompted for your administrator login password.
Restart the computer, empty the Trash, and test.
Step 8
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in the same way you launched Keychain Access.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1                              localhost
255.255.255.255          broadcasthost
::1                                        localhost
fe80::1%lo0                    localhost
If that's not what you see, post the contents of the window.

Firefox does not print in full web pages. It prints at best the left half of the page. This has only happened recently. It is not my printer as I get full page printing from from Internet explorer and other applications. Help!

Firefox has started printibg only the left side of a web page . I have tried adjusting the settings without any success in fact it made the print area even smaller. I have adjusted all the settings on the print menu but cannot overcome this. How can I return to printing full web pages?

Try the '''''reset''''' described here: <br />
http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer

Cannot Add Approved App To A Web Page - App Does Not Show in the App Part Section.

Hi all,
I have successfully add an App from the SharePoint App Store to my SharePoint Site which was developed using SharePoint 2013. The added app was successfully Approved then when I try to add that app using the App Part to a web page I cannot Find it
in the App Part section. I looked in the Site Collection Features & Site Features I couldn't find the app to activate. I don't think I have done some kind of mistake. So then what else I have to do to add that App part to the web page.
Could someone try to solve this matter?
Thanks,
Regards,
Chiranthaka

First, are you sure the App contains an App Part? Not all Apps are written to have app parts. Second, did you add the app to the site collection from Add an App in the Site Contents page? Apps that are added and approved from the Store
are added to the App Catalog for the Web Application. You would normally add them to the Site Collection from there after they are approved.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

HT4061 Can a unlocked (no ATT, Verizon, Sprint plan) iphone 5 bought from an Apple store utilize a phone call while simultaneously checking email, web pages etc.? I know the ATT version can and the Verizon version can't, so can a unlocked Apple?

Can a unlocked (no ATT, Verizon, Sprint plan) iphone 5 bought from an Apple store utilize a phone call while simultaneously checking email, turn by turn, web pages etc.? I know the ATT version can and the Verizon version can't, so can the unlocked version from Apple (which is not yet available) do it?

The tech specs are identical from both wesites of Vietnam and USA--To add further confusion!
Apple Vietnam
GSM model A1428*: UMTS/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz); LTE** (Bands 4 and 17)
CDMA model A1429*: CDMA EV-DO Rev. A and Rev. B (800, 1900, 2100 MHz); UMTS/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz); LTE** (Bands 1, 3, 5, 13, 25)
GSM model A1429*: UMTS/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz); LTE** (Bands 1, 3, 5)
802.11a/b/g/n Wi-Fi (802.11n 2.4GHz and 5GHz)
Bluetooth 4.0 wireless technology
Apple USA
GSM model A1428*: UMTS/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz); LTE (Bands 4 and 17)
CDMA model A1429*: CDMA EV-DO Rev. A and Rev. B (800, 1900, 2100 MHz); UMTS/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz); LTE (Bands 1, 3, 5, 13, 25)
GSM model A1429*: UMTS/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz); LTE (Bands 1, 3, 5)
802.11a/b/g/n Wi-Fi (802.11n 2.4GHz and 5GHz)
Bluetooth 4.0 wireless technology

I can not load a web page? I have gone through the help pages so many times. Removed, reinstalled, checked preferences, checked security settings. Can anyone offer a possible solution?

I can not load a web page? I have gone through the help pages so many times. Removed, reinstalled, checked preferences, checked proxies, cleared cache, checked security settings. I have tried disabling plugins and addons. Can anyone offer a possible solution? On Mac.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*http://kb.mozillazine.org/Error_loading_websites
*https://support.mozilla.org/kb/Error+loading+web+sites

When I print a selected area of web page, it doesn't fit to the paper. The end of each page are cut off. Is there any solution?

When I print a selected area of web page, it doesn't fit to the paper. The end of each page are cut off.
I'm very sure my printer is set cirrectly.
Can't Firefox shrink to fit when I want to print a selected area of web pages?
This has never occurred in IE.

File >Page Setup -- check your margins, I have set size to 85% which is probably left over from some problem. Also check your printer that it is correctly set to the size of the paper.

Safari users see my web pages as blank, until they click the screen

Similar Messages

Maybe you are looking for