Sale Order issue in VBUP table

Hello Gurus,
INCORRECT OPEN ORDER DUE TO DELETED SALES ORDER LINE ITEMS STILL SHOWING IN BW OPEN ORDER REPORTS BECAUSE OF INCORRECT SAP R/3 REJECTION STATUS IN VBUP TABLE.
The sales order line items is still in the VBUP table with rejection Status is maintained as “A” (Not yet Processed) and therefore picked up by BW.
Their status should be changed to “C”.
I want to change the status of sales order as C from A.
I have tried to reload Archive data but due to some limitation I was not able to do it. Also I feel this will like this s not the proper way to do it.
BW consultant has asked to resolve this.
Message was edited by: G Lakshmipathi
Make use of the subject effectively. Don't type the entire text there

Hi Venu,
Thanks for reply.
I will explain in detail...
In a archived saler Order user had deleted Line Item and completed overall sales order. Now this sales order is archived, but it is stll appearing in BW report as open order because of deleted item with rejection Status is maintained as “A” (Not yet Processed).
We want to change this status from "A" (Not yet Processed) to "C" as completed.
I have tried to reload Archive data but due to some limitation I was not able to do it. Also I feel this will like this s not the proper way to do it.
Could you please help me to correct way to do it???

Similar Messages

Serial numbers to generation at Sales Order Issue

Hi someone knows about Serial Control
Do use serial number at pick release is mandatory apply Installed Base?
what´s different between serial numbers generation in reception and at Sales Orders Issue?
thanks,

Do use serial number at pick release is mandatory apply Installed Base?
No it is not mandarory if you use this serial control (At Sales Order Issue). If you use serial number control at receipt then serial number is mandatory at the time of pick confirming.
what´s different between serial numbers generation in reception and at Sales Orders Issue?
At Receipt:
You maintain serial numbers in inventory and transaction them in inventory for all transactions.
At SO Issue:
You enter the serial numbers only at the time of shipments.
As IB knows the inventory controls it maintains the information accordignly. When in inventory serial numbers can be grouped into one instance as they do not have any serial number. Once shipped, the same instance will be split and is created as a different instance with the serial number.
Thanks
Nagamohan

User enter sales order, system display " Lock table overflow",

Hi Experts,
We are facing a problem, user enter sales order, system display " Lock table overflow", and using T-code VL02N, system display "You cannot block the transaction at the moment.
Please help.
Thanks,
Sujit S.

Dear Sujit,
[Lock Table Overflow|Re: Lock table overflow]
Also, Just check with your Basis-Admin in T. Code: TU02 - profile parameter maintenance
Best Regards,
Amit

Pricing condition in sales order-issue

Experts,
i am facing a very strange issue, functional consultant
did some configuration ,such that when header of
sales order have condition type ,let say some 'ZXX',
this pricing conditon should be applicable to all
the schedule line with pricing condition as 'ZXX' where material in schedule line is let say 'ZPP',that mean
these should only be applicable for material type
'ZPP',we are facing strange issue , when scheule line no
10 is having material 'ZPP' ,then pricing conditon is
working fine('ZXX'),but if scheule line no 10 is having
material other than 'ZPP' and if scheule line no 20
is having material 'ZPP' ,then for scheule line no 20
pricing condition is not getting copied from header

goto tcode - vk13
note that [A]--sequence for plant /material
note that --sequence for plant /material/cafgroup
enter ur pricing condition type and
for the plant/material combination etc.. [A]-
may be in the access sequence ur consultant ave given it to a new sequence say plant/material/caf group .. --
like this
suppose say item 10 is for option [A] so access sequence is for this only ..cause material is now in plant/material
now say item 20 is for option so
material at line item 2 will fall under this sequence ..
cumulatively u need to get the total ..
now if the material is same in line 10 20 , u will have to fetch the values from both the tables in sequence and not one table will store the values ..
cause sequence pass for the material is now [A] and 
rememebr that per classification the values are stored in diff table like a906 ,, a90*..
in order to fetch that u need to get it from the tables of classification
and then cumulate it ..
this is important ..
regards,
VIjay.
Message was edited by: Vijay

Sales order issue

hello SD gurus
I have 2 issues:
1) when the sales order value exceeds 1000000 system has to give the warning / error message . where should I have to do the settings
2) if any customer enter wrongly like Qty : 1,0000,000 system has to give the warning / error message , where i have to do the settings
Please give me some light on this
thanks and regards
siva
Message was edited by:
siva narayana

Hi
goto Tcode FD32
enter the customer number and credit control area and select the status check box
to set the credit limit to the customer select goto control area data -
status
we can specify the credit limit of the customer in the field credit limit .
In fd32. you can give the total and individual limit for that particular customer in that particular sales areas or all the sales areas. and also activate in sales document type which credit limit ie, simple or automatic and risk category. in the tcode OVA8. and also in the item category to check the credit for the line items in the order. and also give credit control area in the customer master record and dont forget to assign the credit control area to the company code and the sales area. and in pricing subtotal give A and recquirement 4 which all the credit data will be activated and stored in the table KOMP-CMPRE.
Sail

Unable to post in MI07 for sales order stock - Error Check Table XMSSA

Hi,
When I try to post in MI07, I get the following error Unable to post - Error 'Check Table XMSSA
Unable to post - Error 'Check Table XMSSA: entry 0000000000010011000 CA01 E 1500004153 000010 does not exist
It has something to do with sales order stock. But I am not sure what is causing the issue.
SAP error details:
Check table XMSSA: entry 000000000010011000 CA01 E 1500004152 000010 does not exist
Message no. M7001
Diagnosis
In table XMSSA the entry 000000000010011000 CA01 E 1500004152 000010 is missing.
Procedure
Make sure your entries are correct.
If table has not been maintained correctly, please inform your systems administrator.
Any ideas?

Hi Guys ,
I have faced this same issue . Found OSS note 1360365 . The issue is resolved after implementing this note .
Regards
Rajmohan G

Deleted Sales Orders Issue

Hi,
I have a typical issue with Sales Order deletion in R/3
In R/3,the Sales Orders have been physically deleted due to which the sales orders are not available in the tables.
In R/3 reports those Sales Orders are not reflected. But in BI, since they have already been loaded, they are showing in the results since the SOs at that time were loaded to BI. Once documents are deleted in R/3 those changes are not reflected in to BI. This discrepency is not acceptable by the customer. Plz help in how to resolve the issue.
Many Thanks
Uday

Hi Uday,
It seems the same issue has been discussed sometimes back ,but no solutions were given.
Deleted sales order items and delta direct
As I said earlier,extractor will not capture those deleted items. Even enhancement may also not work for this case. Anyway,please check with OSS whether any solutions available for this problem .I convinced my users to go for the cancellation (not mark for deletion) of the items.
Below link will give you the info about why it is not a good practise to delete the item .
deleted sales order
All the best.
Thanks.

Sales Order Line Item Status Table

Hello All
In which table the item status is stored?
I am referring the fields in the status tab of item in sales order.
Eg: There are total 6 fields under status tab of line item in sales order.
I want to see where these fields can be configured and in which table they gets stored.
Please help .
Thanks in advance
Sonali

Hi
In VVBUP the fields the fields UVP01...UVP05 and VBUP the fields UVP01...UVP05 contain the item staus.
Thank you,
Sekhar.

Sale Order Issue

Hi Experts !!!
Below is the scenario where i am stuck up.
Scenario:
==========
1).I have created Sales order of 9 pieces of a particular item.
Made delivery of 4 pieces.
Balance left is 5 pieces.
2).Again i made delivery of 4 pieces.
Now balance left is 1 piece.
3).Now i have made a Return of 4 pieces of second delivery through sales module.
Problem :
=============
when i view my Sales Order again , then in " Quantity Coloumn " it is showing only 1 piece instead of 9 pieces.
The problem is creating a havoc to my customer , to track the ordered pieces and how many are delivered.
Because if ordered pieces were 9,then why it is showing only 1 piece.
How can i solve this issue,
Regards
Krishna Vamsi .

Hello Rahul Sir !!!
I have checked it .
its "Quantity Coloumn " and not "Open Quantity."
How Ever " Open Quantity " is showing only 1 piece.
But Even "Quantity " Coloumn is showing 1 piece
Regards
Krishna Vamsi

Settlement of Sale Order issue.

Dear friends
I am getting the following error while settling the Sale Order in VA88.
Please guide me in this issue, how to handle?
There are no accrued amounts; settlement is not possible.
Message no. KD256
Diagnosis
The sender has a results analysis key, but no accrued values.
Either the accrual was not yet started for the sender, or the values to be settled from the accrual equal zero.
Note
Actual costs are only settled once the sender is technically completed or finally delivered.
This applies to
Projects that cannot carry revenues
In Service Management for sales order production to the indicator (Calculate WIP for orders in sales order production) set in the accrual version for
Production orders
Internal orders with no revenues
Orders with no revenues
In Service Management for engineer-to-order production to the indicator (Calculate WIP for orders in engineer-to-order production ) set in the accrual version for
Internal orders with no revenues
Orders with no revenues
In Service Management to the indicator (Calculate WIP for internal and service orders with no revenues) set in the accrual version for
Internal orders with no revenues
Orders with no revenues
To the indicator (Calculate WIP for production orders without settlement to material) set in the accrual version for
Production orders without settlement to material
Procedure
1. If necessary, start the accrual calculation for the sender
2. Restart settlement

Now I am getting another error.
Complete PA transfer structure ZR
Message no. KD514
Diagnosis
There is no value field assignment for cost element 911400 / *_variance category COSR_* in PA transfer structure ZR, or
PA transfer structure ZR has no assignments, or
No "Origin" is maintained for the assignments in PA transfer structure ZR (cost element group and, if applicable, variance category)
When I see the Variance Category I didnt find any Variance Category COSR?
What could be the reason.
Thanks in advance
Kiran

Error while updating Sales Order : Another user Modified Table (RDR1 )

Hi All,
I am getting an error message while running the following steps.
Steps
1)     Pull an entry from sales order.
2)     Add new data to line.
3)     Update the sales order.
a)     Sap updated the data.
b)     Through code using DI API we updated some UDF.
4)     With out closing / Pressing OK button
5)     We added new data to line.
6)     Then Press update.
An Error will through by B1 as Another user modified the table(RDR1 ). Before going to the code where we are handling the update of UDF.
But after the 3rd step above when we do
4) Close the window or pressed ok
5) take the sales order window again pull the data
6) Add new Data to line.
7) Update sales order then it will go smoothly.(Updating by B1 and from code )
Can anybody tell me why this happens?And any workarounds to solve this?
Deepesh

are u adding a matrix row thru the code? I get this error when I am adding rows and I get the rownumber out of sync.
if so get the max (lineid) from rdr1 and then check against the matrix.rowcount before adding a row. if lineid is greater that matrix.rowcount take lineid + 1 and assign it to the matrix.row, else take the rowcount + 1
if not, and as a workaround, then you can try using the SBO_SP_transactionnotification stored procedure.

G/L account no missing in sales order-issue

Hi Experts,
I am getting error: G/L account missing while saving the sales order.
It is available in incompletion log, when i choos that it is going to item conditions tab directly.
It seems related to VPRS condition type, because that sales order related to free goods sales order.
There is no pricing condition type, only VPRS condition type is thr.
Please help us to solve this issue. What would be the reason, is there any costing assignment required?
Regards
Lakshmikanth

Dear Lakshmikanth,
To analyse the cause of the error:
VA02 --> Key-in Sales Order No. and Hit "Enter" --> Double Click on to Sales Order Line-item --> Tab: Condition --> Sun-Tab: Analysis
on to next screen, For your Condition Type, check what condition records are missing.
This will help you to maintain Relevant Condition Record, to resolve error.
For Example:
In VKOA, G/L might not be maintained for Condition Type: KOFI/ KOFK.
Best Regards,
Amit
Note: You may also post the Error-Analysis for our understanding.

To save the sales order number in custom table while creation of the order.

Hi Experts,
Does there exist any exit to save the sales order number in a custom table while the sales order is created in VA01. The requirement is to capture the sales order number in a Z table when a field (payment terms ) is changed during the sales order creation.
Regards,
Sunitha

Hi Sunita,
You can store your data in the User exit MV45AFZZ in the form 'userexit_save_document'.
You can navigate to MV45AFZZ from SE38 wherein an access key needs to be generated for that program, if you know to implement enhancement points then you can create an implicit enhancement point in this form without generating an access Key.
Regards,
Ravi Kiran

How to get customer / sales order details for VBBS table?

Hi Friends,
I have a requirement to create a report that will give the details of sales order ( VBELN ) and customer ( KUNNR) details from the sales requirement totals record table ( VBBS )
Currently we have a report that just gives out the VBBS table entries for plant and material combination. As you are aware, the VBBS table contains the sales / deliveries requirements as displayed in MD04 transaction.
Now there is a requirement to have the customer ( KUNNR ) and sales order (VBELN ) detail for each individual requirement totals.
I checked the VBBE table ( sales requrirement : individual records ) but I cannot find any relationship between VBBS and VBBE. If there is a material / plant in VBBS , the same entry does not exist in VBBE.
Please suggest if there is any other table to get this detail.
Thanks
Satya

Tables are related.
MATNR
WERKS
MBDAT
LGORT
CHARG
etc fields are common in both VBBS and VBBE.
May be you can generate a condition a fetch data using this.
I hope it helps.
thanks

Sales Order issue in IC web

Hi
After cofirming account in IC webclient when I click on Sales Order I'm getting below mentioned error,
The business transaction does not support Sales
Customizing of dependent transactions does not fit to requested object
Default flag is missing in customizing table
Regards,
Ajay

Hi Ajay,
Try to check if a sales order document is configurated as depent transaction, at your ICWC business transaction profile (used in your ICWC profile).
The path to reach there (in version 4) is:
SPRO->CRM->ICWC->Business Transactions->Define Business Transaction Profiles
Kind regards,
Bruno

Sale Order issue in VBUP table

Similar Messages

Maybe you are looking for