Sales Order number is not showing in MD04
Hi Gurus ,
I have got one case where Sales order number is not showing in MD04 screen . This sales order , line item has already delivered , PGI & billing document also been generated . Moreover accounting document is also been created .As cheeked & found that it is not shwoing in MD04 screen because at the time sales order creation availability check “01” was maintained which has sum up all the requirement in one particular day ( Also as
per SAP note -70408) .
Now because all the subsequent document has been generated for sales order so we can not mark it for “Rejection for rejection “ & to create new sales order with availability check “02” in material master .
Please let me know the possible solution for the same or if any sap note would be required to get the sales order number in MD04 .
Thanks ,
Aman
Hi Kiran ,
Actually before running the report in “SDRQCR21” in PRD I wanted to run it in “Quality “ .
In quality I am not able to simulate the same .
Please refer below points related to my testing result .
1.Mainatined availability check group “01” .
2 . Created Sales order
3. Check in MD04 screen & as expected sales order was coming blank with negative Qty .
4. Run the MRP which generated PR
5. PR converted to PO & GRN was done which updated the stock
6. Created delivery & checked the same in MD04 . It was also coming blank . No delivery document numbe was showing in screen but it was coming with negative Qty .
7. Done the PGI & blank delivery document number was removed & it become normal .
In PRD .
There are 3 sales order
One sales order is already marked reason for rejection & two sales order delivery , PGI has been done .
But still it is showing blank sales order with negative Qty & after MRP run it is generating the PR also .
I don't why it was showing with negative values .
Please refer attacehed screen shot .
Thanks,
Regards ,
Aman
Similar Messages
-
Ordered item is not showing in MD04
Hello SAP Gurus,
My requirement is like one material is in the sales order but dose not show as ordered in MD04.
Could someone please help me on this.
Thanks
ShaGo to your sales order and note the schedule line category of the line item which you want to check
In t code VOV6 for the schedule line category there is a check box for transfer of requirements near to Availabilty check tick box, If you tick that then this order for this line item will appear in MD04 -
Sales order number in not coming as a text in Accounting Document
Hi Friends,
Sales order number in not coming as a text in Accounting Document in INSTALLMENT BILLING PROCESS
is there any config missing for this doc number
Pl advise me
RajuHI Prem,
Please understand my query.
In VF01 in accounting document we can see the text document field.
Here i need the Sales order number as a Text field.
But it is not coming over here
Pl advise me
Raju -
Sales order Schedule line not showing in prod. order
Hi
I am using Make-to-order production. In my production order i can able to see the sales order number, item number but not able to see the schedule line number. It is showing zero. But in table VBEP table when i checked, system gives the sales order number (eg.1511632), item number (10) and schedule line number (0001).
Why in production order screen and AFPO table i am not getting schedule line number(field name-KDEIN).
Regards
Ganesh MHi,
When an item has more than one schedule line, the system automatically assigns a unique number to each line. The number is displayed in the details screens for schedule lines. The schedule line number serves internal purposes and does not, for
example, determine the sequence of schedule lines in the overview screen. The schedule lines on the overview screen are sorted by date.
Please go to Sale order view from MD04, Click on Item no. and go to schedule line tab page, now you can see the line items and if you want to see in detail click each line item, it will show line item number clearly.
Regards,
Santhamoorthy -
Sales Order Number is not picked in the shipping trasaction.
Hi,
After creating a sales order,then navigating to shipping trasaction and giving sales order number and then
when i am clicking find button,the following error is coming in OM R12.1.1
APP-WSH-231210:An unexpected Error Occured for line 388298.The Error is:ORA-04062:signature of package "APPS.WSH_DELIVERY_DETAILS_INV" has been changed.
why i am getting this error?
Thanks in advance.
Regards,
Bharathi.SHi,
The package WSH_DELIVERY_DETAILS_INV is invalid in your instance as you are getting "Signature of package apps.WSH_DELIVERY_DETAILS_INV has
changed" error message...
Recompile the Invalid objects and hope this will solve your Shipping transaction issue...
Regards,
S.P DASH
Edited by: spdash12 on Sep 15, 2009 5:33 AM -
Sales Order Items does not appear in MD04 after BAPI_SALESORDER_CHANGE
Hi Gurus,
I have this scenario.
1)Create sales order with 3 items.
2)Check in MD04. All items are there.
3)Assign reason for rejection for all the items.
4)Use BAPI_SALESORDER_CHANGE to remove the reason for rejection.
5)Only the first item can be shown in MD04.
Do you have any idea how can #5 happen?
Thanks and Best regards,
AndreThanks for the replies.
@ A.L.V Ramana,
Yes they all have confirmed qty. The one thing I noticed is that only the first item is being saved to table VBBE from which MD04 is getting sa sales documents. Is there any condition that must be met in order for this table to be filled except that if the item has reason for rejection or does not have confirmed qty?
@ Anirudh.vb
Thanks for the suggestion but the users wants a real time update on MD04.
Best regards,
Andre -
Sales order number not appears in account assignment tab
Hi,
User raised PO for third party and account assignment category.But ,Sales order number and its item not appear in account assignment tab.
Can anybody help me.
Lucky.Hi Lucky,
Z Account assignment is not in standard SAP it is customized, u have to check the settings in SPRO->MM->PURCHASING->ACCT ASSIGNMENT-> ITEM CATEGORIES as well u have to know why this is customized, since there is deviation from standard i'm really not able to locate the issue. this is purely based on the requirement done, if it is as per standard SAP sales order number will definitely show in acct assingment tab view.
Thanks for your inputs on this issue.
Regards
Rang -
Financial Document not updated with Sale Order Number
Hello,
I wish to update the Financial document posting from the billing document with the Sales order and line item number against the revenue account.
This is not populating in COBL-KDAUF.
I have seen some other messages concerning this, but none with answers.
Is this possible, I assume it is.
If so, are there any other necessary settings?
We are not using CO-PA, and I can get the reference number & /or allocation field to populate with the sales order number but not line item. But I want the coding block filled so that BSEG VBEL2 is populated.Hi Roger,
In the situation that you have a 1:1 relation this is possible with a substitution and look then to the order in the first line from the invoice.
Where you can have a look to is the sumarization in FI and CO. TC OBCY for VBAK and VBRK.
Example:
When you have 2000 posting lines in an invoice the system can create 1 posting line by used G/L account
With this transaction you can set-up that there is create one posting line by:
(G/L account)
Sales order number
You have first to look how your set up is. (perhaps when this is set-up correct you have already the order number in the field).
Paul -
Sales order Number not appearing in CO-PA report painter
Hi
I have prepared profitability report through report painter through t-codes KE34 and KE31-
Characteristics I have chosen is Sales order No/Plant/sales organization/product and customer-
In the report Sales order Number is not appearing?
We are able to see plant number/sales organization no/product no and customer no-
Where I have committed mistake
Thanks in advance
joseph davidHI,
In order for you to see Characteristics in KE34 form definition, they have to be defined as 'Segment level' in KEQ3, as also metioned by Christian. However, it is not advisable to define 'Sales order #' as a Segment level, considering that 'Sales order #', changes frequently and also owing to performance issues with huge number of Segment level records which gets created in the course of time.
If you want to report based on Sales order, then please consider using line item form/report KE94/KE91 or check if KE24 is sufficient.
Hope this helps. -
How to copy Customer Sales Order number to Purchase Order for 3rd party sal
Hi experts,
We are doing third party sales. So once we create Customer Sales Orders manually via VA01, users also manually create Purchase Req for it.
We do not automatically create PR from Sales Order, as this is not my clients requirement. So we don't use item category group BANS in the material master.
In the item level in the PR under the Contact Person tab, the creation indicator shows "V Sales & distribution document". Once PR is created this updates the PR number under the item level Schedule lines in the Sales Order.
After PR creation, we run a job to create PO's.
But the new requirement from the client is to automate this PO creation thru EDI.
Our SAP is 4.6C & the Idoc type we use is ORDERS05 & Message Type is ORDERS. We are using EDIFACT std.
Once I get the idoc xml file for this PO, I find that my Customer PO number (from the Sales Order) & also the Customer Sales Order number is not copying to the xml output.
Please advise what needs to be done inorder to have it.
This will be great help & I will reward for the answers !
Rgds,
PriTables are related.
MATNR
WERKS
MBDAT
LGORT
CHARG
etc fields are common in both VBBS and VBBE.
May be you can generate a condition a fetch data using this.
I hope it helps.
thanks -
Customer Sales Order number & Customer PO number
Hi experts,
We are doing third party sales. So once we create Customer Sales Orders manually via VA01, users also manually create Purchase Req for it.
We do not automatically create PR from Sales Order, as this is not my clients requirement. So we don't use item category group BANS in the material master.
In the item level in the PR under the Contact Person tab, the creation indicator shows "V Sales & distribution document". Once PR is created this updates the PR number under the item level Schedule lines in the Sales Order.
After PR creation, we run a job to create PO's.
But the new requirement from the client is to automate this PO creation thru EDI.
Our SAP is 4.6C & the Idoc type we use is ORDERS05 & Message Type is ORDERS. We are using EDIFACT std.
Once I get the idoc xml file for this PO, I find that my Customer PO number (from the Sales Order) & also the Customer Sales Order number is not copying to the xml output.
Please advise what needs to be done inorder to have it.
This will be great help & I will reward for the answers !
Rgds,
PriHi,
In VOV8 you can only Check whether the purchase order number already exists or not.
If you want to do any other check like you said based on customer & PO number combination then follow steps below:
Ask your ABAPER to
1: Create a Z-table where you can store the required Customer No & PO No combinations.
2: Write a code to check the PO no & Customer No entered in Sales order with the entries in the Z-table & throw an error if there is no match.
This code needs to be written in the User exit Save_document_prepare by your ABAPER.
3: This will work at time of Save & not a point of entry. The result will be same "error msg will be thrown"
regards
Edited by: Innovation is key on Feb 28, 2011 6:08 PM -
Sales order number in Assignment field
Hi,
The requirement is to capture Sales order number in the assignment field of the accounting document.
Pls adv how to meet this.
I have seen the tables BSEG and BKPF , but Sales order number is not coming in either of the tables.
RegarsdOK lets start at the begining you have a sales order or sales orders, then a delivery or deliveries and then a billing document.
OK the Sales Order is captured in table VBAK being the header and VBAP the line item detail.
VBRK and VBRP are the line items details of the Billing Document
The billing document can be found in the accounting document tables BSEG, or BSID, BSAD.
In the create Finance document BAPI from SD you can code in the sales order, however you need to consider that a single accounting document may have more than one sales order.
If you have processes where there is a single sales order for every accounting document then this will work.
Hope this helps, award points if this is useful. -
How to get sales order number before saving in VA01 by using parameter
Hi,
Please let me know how to get sales order number in transaction VA01 before saving it by using parameter in SU3.
I tried to set parameter in SU3 "AUN", but it is not working as required, means sales order number is not appearing before saving.
can you please suggest how to do it?
Thanks & Regards.
Rahul VerulkarHi,
In case of Support project, we get the high severity issues from users and needs to be closed withn 2 hours... so what we do we get the requirement from user and checking the same in production from our id, but we can not save the sales order as we are not authorized to do the same, so in such cases it is required to get the sales order number before saving... where we can guide the users.... but actuallly it is not getting saved in the table until and unless u save it manually. It works like a material master... when u create material master, the material number appears in advance in material number field "MATNR"
If it is possible can you please suggest step by step to work on parameter in SU3 for sales order number before saving.
Thanks & regards,
Rahul Verulkar -
BDC capture sales order number
Dear All,
I am having one excel file which i am uploading from presentation server. Based on this file, sales order gets created through BDC Call transaction method.
Suppose i have 10 records in flat file then 10 sales order number should gets created. But i am not able to get sales order number through call transaction method. Sales order number are not getting populated in internal table having structure BDCMSGCOLL.
Any idea how to capture the sales order number at run time depending on how many records present in my excel file.
I cannt go and check VBAK table for that.
Thanks in advance for your kind help.
Regards,
Tbetter to use BAPI Function module ,
see the below example for capturing the order # using bdcmsgcoll structure
CALL TRANSACTION c_va01 USING t_bdcdata MODE C_N
update 'S'
MESSAGES INTO t_bdcmsg.
REFRESH t_tcdata.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
v2 = sy-msgv2
IMPORTING
msg = g_vbeln
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF sy-subrc = 0.
g_vbeln = sy-msgv2.
ENDIF.
Reward Points if it is helpful
Thanks
Seshu -
Sales order number not showin in ATP sccreen
Hello All
Can you please answer my quesiton regarding ATP, i created a sales order, system performed ATP check and saved.
In MD04 screen, i see the sales order number as a demand, but when i navigate to ATP quantities screen from MD04, there i see Totals record demand demand for the sales order, but i can't see the sales order number even when i click on Details of total records, also i am not able to create a delivery for this sales order, can you please tell me how to fix this?
Thanks
manjuPlease see the date the Schedule line has been confirmed. Delivery can be created only the material availablility date seen in the shipping tab in Schedule line. or the transportation planning date seen in the shipping tab of schedule line.
In case if you still have have issues, please reply.
Regards,
vasim.
Maybe you are looking for
-
Not able to install studio + controller on windows server 2012 r2
Hi, i have installed windows server 2012 R2, now i want to install windows HCK 2.1 with controller + studio option but i am not able to install because that option is grey. what additional settings i have to do in order to successfully installation
-
How to use the windows API GetCaretPos with FireFox? It works with IE
I want to get caret position from a windows desktop application using the Windows API GetCaretPos. It works in any windows Application and in IE. It worked also in FireFox for some minutes in version 3.6.8 but than it stopped working. Can anyone tell
-
Stylus RMX on MPB 2.2 ghz 4 GB RAM???
Hi all, I'm thinking of getting Stylus RMX for use in Logic 8. I'm running a Macbook Pro 2.2 ghz with 4 GB RAM. On a typical song, I have about 5 or 6 audio tracks with effects, 1 or 2 soft synths running (UB, EXS24), and 4 aux busses with verbs and
-
can anyone help, my late 2010 MBA's - OS X Lion 10.7.5 wifi won't turn on after a deep sleep.. thanks..!
-
Hi Experts, iam executing a query on multiprovider, below is the errors im getting.. so my requirement is to save the query as local, in production system..... Error i gt: 1. Infoprovider was changed or activated at runtime 2.