Sale set,prepack and display

Hi,
Can anyone tell me about the difference between display,sale set and prepack in IS retail.
would appreciate if some practical examples are given

Hi,
Article comprising several components structured as a bill of material / article called as Structured Articles, namely; Sets, Prepacks and Display.
Sets: Sets are usually handled in one of the following ways:
(a) As sales sets: The components are packaged together and can often also be sold individually.
Example: Toothpast with Tooth Brush
(b) As price sets: Price sets are formed only by the assignment of a joint sales price. This price is normally lower than the total sales price of each of the components which can always also be sold individually. The components are not packaged together.
Example: Hamper / Three pieces of Soaps / Biscut Packet
Display:Group of single articles or variants of one or more generic articles that is purchased as a separate article and as such has an article number, a purchase price, and purchase price conditions. The components are grouped together by the manufacturer or vendor.
In the wholesale trade, displays are purchased and sold, whereas in the retail trade, only the components are sold. For this reason, stock is managed at display level at the distribution center, and at component level at the store.
Example: Candy bars and Pantyhose displays
Prepacks: Group of variants of one or more generic articles that is purchased as a separate article and as such has an article number, a purchase price, and purchase price conditions. Unlike a display, the components must belong to the same merchandise category as the prepack itself. They can be grouped together by the retailer as well as by the manufacturer or vendor.
In the wholesale trade, prepacks are purchased and sold, whereas in the retail trade, only the components are sold. For this reason, stock is managed at prepack level at the distribution center, and at component level at the store
Example: Shoe Prepack
Bye,
Muralidhara

Similar Messages

Display Pop up message when changing and displaying sales orders?

Hi Friends,
My client requirement is to display text popup during change sales order VA02 , and Display sales order VA03.
Pls find me a answer for this , Thanks.
Nina.T

Hello Nina...
Hope you are aware of the configurations you need to maintain for the Text determination.Anyway, herewith are the steps that may help you to accomplish your requirement.
Text Determination procedure for sales document header:
Text can be determined at sales document header level or it can be imported from customer master. The process is...
Define Text types: Path: Imgsales and distributionbasic functionstext controldefine text types
Select sales document header. click on text types go to new entries and define text types. For Eg:Z1
Define Access sequence:
Select sales document header
Click on change icon
Click on access sequence control button under dialog structure
Go to new entries and define access sequence number with description.Ex: 55
Save it and exit
Define text determination procedure:
Go to new entries
Define text determination procedure.Ex: ZX save it and exit
Assign text id's to text determination procedure:
Select your text determination procedure(ZX)
click on text id's in text procedure control button under dialog structure
go to new entries and maintain entries. Text id:assign text id (Z1) that we defined in the previous step
Specify sequence No-10
Check Reference: this indicator specify that the text is reference or copies from preceding object
Text in obligatory: text will be displayed during copying. the value of this field specifies whether text is obligatory or not and if it is obligatory the how it is to be displayed
Apart from this... you also have to maintain the text in the Customer master as mentioned in the previous mail..
Thanks,
Safeer Rahman

Problem with Sales Set in ECC 6.0

Hai Guys,
I am having a problem on having a Sales Set. We have two company codes.
I am creating the sales set by the following steps.
1. Create an article, (type: Sales set instead of single article) and in the Basic Data, click the components button, in the subsequent screen entered the component articles and the qty.
2. After listing that Sales set article to the desired sites, I am creating the sales set article using the movement type 317 in tcode mb1b.
3. In my inventory, the component's stocks are reduced and the stock of the Sales set article is increased.
4. Once the Sales is made for the Sales set article, and PGI is done, the system reduces the stock of the Sales stock and no changes is made to the remaining component article stocks.
Here is where I encounter the issue.
In one of the company code, this is working fine.
But in the another company code's sites, when I do the PGI for Sales Set article, the stock of the Sales Set remains the same but the component articles' stocks are reducing.
I am startled to find the unusual behavior. Does it has anything to do with the site profile or any other MM customizations?
Had anybody come across this kind of issues previously? Can anybody help me in this aspect?
Regards,
Maheshwaran. I

no replies still.. so closing

Sales Set

Hai Guys,
I am having a problem on having a Sales Set. We have two company codes.
I am creating the sales set by the following steps.
1. Create an article, (type: Sales set instead of single article) and in the Basic Data, click the components button, in the subsequent screen entered the component articles and the qty.
2. After listing that Sales set article to the desired sites, I am creating the sales set article using the movement type 317 in tcode mb1b.
3. In my inventory, the component's stocks are reduced and the stock of the Sales set article is increased.
4. Once the Sales is made for the Sales set article, and PGI is done, the system reduces the stock of the Sales stock and no changes is made to the remaining component article stocks.
Here is where I encounter the issue.
In one of the company code, this is working fine.
But in the another company code's sites, when I do the PGI for Sales Set article, the stock of the Sales Set remains the same but the component articles' stocks are reducing.
I am startled to find the unusual behavior. Does it has anything to do with the site profile or any other MM customizations?
Had anybody come across this kind of issues previously? Can anybody help me in this aspect?
Regards,
Maheshwaran. I

Hello Maheshwaran,
Did you check the standard sales set explosion configuration in Logistics-General -> Material Master -> Retail-Specific Settings -> Settings for Structured Materials -> Structured Article in Logistics Process? Maybe in here, for the other company code's plants, the settings are maintained differently.
Thanks and Sincere Regards,
Amitabha

Prepack vs Display in SAP retail

Hi guys,
I am still struggling to understand the difference between prepack and Display in SAP retail.
Anyone has a good understanding of that?
Cheers
Julien

Hi
Prepack:
Variant from different generic articles belongs to same merchandise category grouped together as component and created with article category 11.
Prepacks are used in Fashion retail where merchant wants to order specific variants (color and size) rather than ordering all the variants from generic articles.
Vendor ship prepack articles and received in DC as prepack articles whereas it will be sold at component level in Store.
Display
Variant from different generic articles belongs to different merchandise category grouped together as component and created with article category 12.
Vendor ship as display articles, stocks are maintained at DC as display articles but sold in store at component level.
Display articles are used in FMCG sectors mostly and to some extend it is used in Fashion as well. These articles generally kept at billing counters and customer will pick the components as they like it.
Best Regards
Swami

How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

I learned that the Dock is positioned at the chosen edge of whatever Display is positioned farthest to that side. E.g. for the Dock to be positioned on the right side of the Cinema Display (instead of the right side of the MacBook), the Cinema Display must be oriented (by dragging) to the right of the MacBook monitor on the "Arrangement" tab of the Displays Preference Panel.

Is there a way to set up multiple displays to show different DeskTops and/or multiple Full-Screen apps independently?

Hello Apple users/ develpers.....
I have been thinking about this long and hard and it seems like there should be some way to display separate Full-Screen Apps and/or mulitple Desktops.
This would be a key feature that would make Lion surprisingly more efficient than any of its predicessors. However, I have gone into System Preferences>Displays and could find no way to page through and get different desktops to display. I always could extend the desktop, but why do that when I can simply use multiple Desktops and assign them to specific displays.
(For example While on the MacBook Pro I could be doing a project in FinalCut while External Display 1 could be displaying iTunes and Display number 2 could be displaying MS Word. And between each I can switch between each app without changing the monitor display.)
I could also seeing this being extremely helpful in DJ and/or PowerPoint presentations. In a PowerPoint presentation I could use the projector/display to show the individual Slides, while on the computer/laptop I could control other materials.
Or in a DJ situation, I could be controlling iTunes from the computer, displaying a set of animations that I created in Flash/ToonBoom or another animation program, while still being able to work off of an independent display to do my homework or major project.
The whole purpose of multiple displays would be to have multiple access to each of those. And so if there's another APP I need to control them, or if there is a setup command I don't know about, I'd like to know right away.
Also, if Apple hasn't really implimented this (and their OS is designed to have these features) then I guess this'd be my first recomendation to them as something that they need to fix. This alone could be the key to crippling PC. Don't let Windows 8 have a back door!

Not available, why not suggest it here.

Sales set in Retail and BOM explosion in sales order

Greetings.
I configured a sales set that contains variants of generic articles and also unique articles as follows:
Sales set: distinct code, LUMF - item category group, gets TAQ item categ in SO; it contains:
- Var 1 of article X, distinct code, NORM, gets TAE in SO and mat. nr. and HL item is greyed out in SO
- Var 1 of article Y, distinct code, NORM, gets TAE in SO and mat. nr. and HL item is greyed out in SO
- unique article Z, distinct code, NORM, gets TAE in SO and mat. nr. and HL item are NOT greyed out in SO
as a result changing Z with whatever different article is possible.
Also the individual quantities for the components are editable: I was expecting to be able to modify ONLY the set's quantity and see the components multiply accordingly but iti is not the case.
You can download a picture from [HERE|http://fbx.ro/5j87odrxexs3s7it]
My question is: what settings are needed to have inactive/grayed out quantity, material number and HL item for the components of the sales set and why do I get a different behavior between a unique material compared with a variant ?
Thank you in advance.
Best regards.
Edited by: Enache Catalin on Jan 21, 2009 4:25 PM - add picture

Thank you for your patience.
The link would have revealed that there is no visible difference between SO's made with ERLA and LUMF header material , in both the user can modify quantities, item category, plant for ALL subitems and measurment unit plus Higher Level Item ONLY for unique items(why? that was my secondary question).
Nevertheless I tried to follow your steps and forth is what I found:
- working in Retail I didn't use CS01 for creating the BOM; instead I defined the structure(mat. codes and quantities) directly in header material (sales set - 10 material category - in my case). I could however open with CS02 the right BOM for my sales set but only if I don't mention the plant.
- further I used CS01 and added the delivering plant this time-> no result, the subitems can still be modified as described above...
I must add that I tried to use for sales set both KMAT and TRGO articles...and it happens the same.
Best regards.
Catalin.

In Keynote09, if i set custom presenter display settings (large presenter notes), and i save the file, will i see my notes in the same way on another computer? Are the presenter display setting saved in the file?

In Keynote09, if i set custom presenter display settings (large presenter notes), and i save the file, will i see my notes in the same way on another computer?
Are the presenter display setting saved in the file?
Thanks for your help!

it wont.
Presenter note display is set per machine.
Surprising nobody in this community knew this.

How to decode a set of datas received from serial port and display image on a canvas based on CVI ?

Hi !
I have received a set of datas via rs232 and it contains picture messages. I have to decode the datas first and then display them on a canvas.
I have known several functions that may be used . Such as
int SetBitmapData (int bitmapID, int bytesPerRow, int pixelDepth, int colorTable[], unsigned char bits[], unsigned char mask[]);
int CanvasDrawBitmap (int panelHandle, int controlID, int bitmapID, Rect sourceRectangle, Rect destinationRectangle);
However,I don't know how to set the following parameters according to the actual pixel values and color values.
int bytesPerRow, int pixelDepth, int colorTable[], unsigned char bits[], unsigned char mask[]
What's more,I have no idea how to decode the datas.
The attachment is a incomplete project. I will be very appreciated if anyone could help me .
Best regards.
xiepei
I wouldn't care success or failure,for I will only struggle ahead as long as I have been destined to the distance.
Attachments:
Decode and display image.zip ‏212 KB

Well, things are getting a bit clearer now.
1. Your image is actually 240x240 pixel (not 320x240 as you told before). The size of image data is 57600 bytes which corresponds to that frmat (I was puzzled by such a data size compared with larger image dimensions!)
2. The image is a 8-bits-per-pixel one; this means that you must provide a color palette to create the bitmap
3. You cannot simply copy image data into bitmap fields in CVI: CreateBitmap always produce an image with pixeldepth matched with display colour depth (normally 24 or 32 bpp)
All that means that you must:
1. Create the appropriate color palette with 256 colors: it may be a grayscale or color palette depending on camera characteristics. Grayscale palette can be found in my sample project, while sample colour palettes can be found here (here the description of a "standard" 8-bpp color palette)
2. Create the bits array correctly dimensioned for the color depth of your monitor
3. Get each pixel value from the camera, lookup in the color palette for the appropriate colour and create the RGB informations into the bits array in memory
4. Display the bitmap on the canvas
As a first step, I would configure my system for 256-color display setting, create a bitmap and simply copy image data into it: you should be able to get the correct image back to your screen.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Concept of Bom and Sales Set

Hi Gurus ,
Pls tell me concept of sales set and bom .
I Wanna to know the complete process about it .
Thanks and Regards ,
Raj Bajoria ( Raja)

Hi,
After creating the BOM, the SD people could create the Sales order. or use the sales BOM also.(I think tr.code:CS61)
pls go through these links.
http://www.sap-img.com/production/discrete-manufacturing-the-made-to-order-cycle.htm
http://www.sap-img.com/production/discrete-manufacturing-the-made-to-stock-cycle.htm
regards

I am having problems to run logic pro 9, there is an error display that says I need to set bonjour and that this app serial number has been used by another red user, could anybody guide me?

I am having problems to run logic pro 9, there is an error display that says I need to set bonjour and that this app serial number has been used by another red user, could anybody guide me? actually, my computer can't start since three days ago, could it be the same problem?

Logic is the APPlication (program, app) that you are having the problem with.
Logic Pro can take advantage of other computers on your local (home or work) network to help it do "heavy lifting" data chores by using Bonjour and a feature called Nodes. It seems that Logic is attempting to find and connect to another machine on your network.
Do you have Logic installed on another computer there? That may be the source of the confilict.
You might want to post this question in the Logic Pro Community.
Be sure to indicate the version of Logic Pro that you are using. I'm sure the folks there can help you out.

HT204023 I am not able to set my Personal Hotspot setting, if I try to set it massage displayed "To enable Personal Hotspot for this account, contact carrier " I am in Oman and using Nawras service for data plan. Plz help me

I am not able to set my Personal Hotspot setting, if I try to set it massage displayed "To enable Personal Hotspot for this account, contact carrier " I am in Oman and using Nawras service for data plan. Plz help me. Before I was using this service but now facing problem.

Md Asad wrote:
Yes but they told mobile co mean Device 'iPhone co'
Sorry but that makes no sense in English. Only your mobile phone company (i.e. "carrier") can enable the Personal Hotspot feature.

Remote Call to Blazeds and displaying the result set in grid

Hi,
I want to call a remote method using Flex application from Blazeds and display the values in DataGrid. Can anyone help in this ?
-- I am using AMFChannel
-- The method to be called is PolicyApnVO.getPoliciesApn()
-- Please advice any correction if required
Here is the mxml code :
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
                creationComplete="initApp()" viewSourceURL="srcview/index.html">
    
    <mx:Script>
        <![CDATA[
            import mx.messaging.ChannelSet;
            import mx.messaging.channels.AMFChannel;
            import mx.rpc.remoting.mxml.RemoteObject;
            [Bindable]
            public var srv:RemoteObject;
            public function initApp():void
                var channel:AMFChannel = new AMFChannel("my-amf", "http://192.168.102.208:8400/policyAnalytics/messagebroker/amf");
                var channelSet:ChannelSet = new ChannelSet();
                channelSet.addChannel(channel);
                srv = new RemoteObject();
                srv.destination="runtime-policy";
                srv.channelSet = channelSet;
                srv.PolicyApnVO.getPoliciesApn();
        ]]>
    </mx:Script>
    <mx:Panel title="Policy Details" width="100%" height="100%">
        <mx:DataGrid width="100%" height="100%" dataProvider="{srv.PolicyApnVO.getPoliciesApn.lastResult.data.result}"
                     showDataTips="true">
            <mx:columns>
                <mx:DataGridColumn headerText="APN Id" dataField="apnId"/>
                <mx:DataGridColumn headerText="APN Name" dataField="apnName"/>
                <mx:DataGridColumn headerText="Policy ID" dataField="policyId"/>
                <mx:DataGridColumn headerText="Policy Name" dataField="policyName"/>
            </mx:columns>
        </mx:DataGrid>
    </mx:Panel>
</mx:Application>

There may be other ways to do this but here's what I would do:
1) add a results method to the remote object:
src.result="onResult(event.result)";
2) add the callback method: private function onResult(event : * = null)
:void{
                                                     if(event is
ArrayCollection)
                                                            myData =
ArrayCollection(event);
3) add the variable: private var myData:ArrayCollection;
4) make the dataProvider for the grid use the my data :
dataProvider=""
You can probably avoid all this by adjusting your dataProvider. I am just
not sure what it would be without experimenting. But definitely not what
you have. Maybe just {svc.result}.

How to trigger an Idoc from Sales order creation and change

We are trying to trigger Idoc from sales order creation and change we have done following setting mentioned below:
Follow the below steps:
1. Go to NACE transaction
2. Select V1 application and select OUTPUT TYPES
3. Select the required output type and double click on Processing routines.
4. Enter Medium as DISTRIBUTION ALE, Program as RSNASTED and Routine as ALE_PROCESSING.
5. Save it.
message type ORDERSP in the distribution model (BD64).
Follow the below steps to configure the condition records:
1. Go to NACE
2. Select V1 application and select CONDITION RECORDS
3. Select the requred output type and click on Condition records
4. Selection screen will be displayed.
5. Go for execution. In that screen enter the selection criteria. For eg Condition record is based on Sales document type. Then
Sales doc type = OR
Funt = SP
Partner = blank. It means there is no restriction on partner numbers.
Medium = A
date/time = 4
Lan = EN.
Note: partner is left blank means, the sales order of type OR can be send to all partners.
6. Save it.
We also done ALE configuration.
We are facing problem that from VA02 "No output has been selected for printing Message no. V1102"
Kindly suggest the solution.
Regards,
Sharad Dixit

Hi ,
Please check the total error description and diagnosis as below :
InVa02 enter SO go to extras->output->Header->edit.You can find a table with all the triggered output types. Choose the output type BA00 with medium Distribution ALE and go for 'Processing log'. It will show you the error description.
Please paste the diagnosis .
Thanks and Regards,
P.Bharadwaj

Sale set,prepack and display

Similar Messages

Maybe you are looking for