Sales order confirmation based on Consignment stock only.

Hi All,
i have a requirement at my client.
they want the SO to be confirmed based on the consignment stock only (no other stock like unrestriected etc).
i tried my best ans waiting for response from your side.
i tried to create a requirement class with 'stock type" K but was not succesfull. if someone know how to do that let me know.
Regards,
Pravin M
TCS canada

Pravin,
Let me see if I understand the requirements of your client. They want to confirm sales orders, to allow them to sell parts that don't belong to them (vendor consignment)? I can't imagine that this could be done in standard SAP. From a financial perspective, I would think they would first have to transfer the parts to their ownership "somehow" and create some kind of payable to the vendor, before confirming.
Anyhow, if the business users insist on this functionality, I believe you are facing some kind of custom programming that will modify the 'standard' workings of the ATP check.
Best Regards,
DB49

Similar Messages

It still shows confirmed quantity at sales order in case of no stock

Hi,
I have the availability check configuration, but my requirement for 0 confirmed quantities at sales order in case of no stock is not working. That is- It still shows confirmed quantity at sales order in case of no stock. Please suggest.
All the setting for availability check is done. I have set the accumulation as 3 in checking group. But still not working.
Thanks
Mauryan

Dear Mauryan,
ATP check will work if you have already turned on ATP check in the following 3 transactions:
OVZ2
OVZG
OVZ8
You need to turn on ATP at your checking group, requirement class, and schedule line category. If one of them is off, then ATP check will not work. See note 547512, Q1.
Claire

Sales Order Confirmed qty set to zero even without credit check at SO level

Hi
Credit management is implemented and dynamic credit limit check has been assigned only for delivery doc types for blockig PGI.
There is no credit limit check assigned to sales order types as per the customers requirement.
However, we came across a scenario where, the confirmed quanties in a sales order were set to zero even though stock was available for the materials and no credit block at SO level.
The issue was however resolved by going into change mode of sales order>edit> check availability. The schedule lines for all the materials were confirmed.
Unable to figure out why the schedule lines were not confirmed even though stock available.
Checked the routiine 101 in OVB8 but it only applies if credit limit check active at sales order level.
Also checked 'conf.block' for 01-credit limit check in OVZ7 but even this applies if credit limit active at sales order level.
Note: This happened only once. The same scenario was tested in Quality system and there the schedule lines were confirmed even when the customer exceeded the credit limit.
Please let me know if I hav overlooked anything that needs to be checked.
What could be the reson for the items not being confirmed when the order was created?
Regards
Madhu
Edited by: Madhu Naidu on Jul 12, 2011 2:05 PM
Edited by: Madhu Naidu on Jul 12, 2011 2:06 PM

Hi Vinayak
Thanks for your response.
As you said it migt be bcos of the conf block at OVZ7, but the F1 help for that says that it applies when there is a credit limit check related delivery block in the sales order.
However, in my case, there is no credit check assigned at sales order level.
And also when I tried to recreate the scenario by creating an order for a customer who had exceeded the credit limit, it didnt delete the confirmed qty from the schd lines even after saving.
ANy possible reasons other than credit check conf block that could have led to schd lines not being confirmed inspite of sufficient stock??
Regards
Madhu

Why we dont have a sales order in case of Intercompany Stock Transfer?

Hi,
Why we don't have a sales order in case of Intercompany Stock Transfer?

HI,
It is up to the client requirement business scenarios..
U can do stock transfer with so many ways..
1. one step process
In this just stock transfer between two plants but no goods reiceipt only goods issue
2. two step process
In this both goods issue and goods receipt docuements
3. stock transfer with out delviery
Here purchage order NB with goods issue and goods reciept
4. stock transfer with delviery and billing..
In this Purchage order, goods issue, migo, miro and inter company invoice..
Regards
sankar

Changing the status of the sales order item based on reason for rejection

Hi All,
When a Sales order item is rejected then the status at the item level is changed as 'TECO'.When the reason for rejection is removed the status 'Teco' is reset.This status change can be achieved using the user exit 'MV45AFZZ'.But the exit does not allow re-atp calculation whenver a blocked item is release.I have use the exit 'MV45AFZB' ,through this the status change as well as re-atp calculation takes place.But the status changed(Based on reason of rejection) does not appear in the same screen.The change gets reflected only when the sakes order is saved and i open it again.
I want the status change to appear in the same screen.I am doing my code in the form 'userexit_check_vbap' of the exit 'MV45AFZB'. Please let me know if there are any user exits or BADI's available for the same(Changing the status of the sales order item based on reason for rejection ).
Regards,
S.Subasree

Hi subburamaiah
If you want the report you can create a separate SIS report . In that take the input field as a Reason for rejection.. and ask for the output the list of sales orders .Now when you check this user defined report you will give the reason for rejection and check what all orders got rejected on that reason for rejection.
Regards
Srinath

Printing sales order confirmation if order changes

Hi all,
I have to implement some changes in output control to achieve a particular requirement.
Business wants sales order confirmations to get re-printed if and only if some changes in the sales order were cought.
For example if the quanity of a position changes then, the sales order confirmation must be re-printed.
I was thinking to use requirement routine for sales order confirmation but in the structure komkbv1 and kompbv1 there are not all the fields i need to understands if in the sales order, any changes have been performed.
Another way would be the user exit save_document_prepare in which i can use xvbak and yvbak in order to gather info about the changes in the sales order, but i am not sure this is the right way to achieve what business has asked to me.
Do you have any ideas? Please, any suggestion is welcome!
Regards,
Fabrizio

Hi gurus,
My idea is:
-user exit save_document_prepare: check chenges in SO using xvbak, yvbak etc.. If a change occurs i will set a particular parameter using "SET PARAMETER".
-user exit USEREXIT_KOMKBV1_FILL: i will fill the communication structure with respect of the instruction of "GET PARAMETER"
- requirement routine for sales order (vofm): checking of the communication structure to understand if sales order confirmation has to be re-processed or not.
What do you think about this solution?
Thanks,
Fabrizio

BA00 - Sales Order Confirmation Output

Hi, can anyone advise why the std 'BA00' sales order confirmation output is not proposed automatically when i changed the item category of one of the sales order line to 'TAB' 'Individual PO'? It was there initially when the item category is 'TAN'.
Thanks
PP

Dear.
I found the confirmation status(header, item) is appeared when the item category from TAB is used.
The confirmation status is set to 'Not yet confirmed' when automatic purchase requisiton has been created. After creating PO based on the purchase requisition the confirmation status is changed to 'All items confirmed', then the output determination will be activated.
SAP IMG control data for 'Maintain Output Determination Procedure', requirement 2(order confirmation) is used. Belows are source code for requirement 2.
The variable KOMKBV1-COSTA is set 'A' when PR is created, so the ouptput determination procedure can't be executed. After PO is created the value is set to 'C', ouptput determination procedure is executed.
Hope this will hlep.
   FORM KOBED_002.
* If the sales document is complete, then the output should be created.
SY-SUBRC = 0.
IF KOMKBV1-UVALL NE 'C'.
    SY-SUBRC = 4.
    EXIT.
ENDIF.
IF KOMKBV1-COSTA NE SPACE AND
     KOMKBV1-COSTA NE 'C'.
    SY-SUBRC = 4.
    EXIT.
ENDIF.
IF NOT KOMKBV1-LIFSK IS INITIAL.
    IF KOMKBV1-LIFSK NE TVLS-LIFSP.
      SELECT SINGLE * FROM TVLS WHERE LIFSP = KOMKBV1-LIFSK.
    ENDIF.
    IF SY-SUBRC = 0 AND
       TVLS-SPEDR NE SPACE.
      SY-SUBRC = 4.
      EXIT.
    ENDIF.
ENDIF.
* Kein Druck, wenn Kreditsperre sitzt
* No output if the credit block is set.
IF   KOMKBV1-CMGST CA 'BC'.
    SY-SUBRC = 4.
    EXIT.
ENDIF.
ENDFORM.

Sales Order confirmed date in work days

Is there a way to change configuration so a Saler Order will confirm based on the Factory Calendar??
I created a new Order Type (VOV8) but see no option to change from calendar days to work days.
Bascially, I need the sales order confirmation date to be based on work days and not calendar days.
Is this possible???

Hi,
Sales Order is created for particular Sales Area i.e. SO + DC + Div. And Sales Org. is the highest org unit in SD.
At Sales Organizational level you maintain Sales Org calendar and not factory calendar.
Factory Calendar is basically used at plant level which comes under MM module.
So, by SAP std practice i dont think it will be possible..............
Or you can do one thing that is,........maintain the same sales org calendar as factory calendar..........so i think it will help you....
But can you elaborate you point so that we can understand properly.............
regards,
Sagar

Tcodes for Sales order confirmation, Adv shipping notification, del note?

i wanna know where do we create sales docs like shipping notification, delivery schedule, invoice or billing document, po confirmation , sales order confirmation etc etc. which are not the regular sales documents like the sales order(va01), delivery (vl01n), billing (vf01) which have their regular Tcodes. so i wanna are there tcodes which can create the above documents . i guess not. so how do we create these and send them to our customers
thanks
n. bhardwaj
SD

Hi Neha,
Just look in table TSTC and TSTCT for the transactions. In these tables you can search based on the description.
Regards,
Atish

Need adobe print program for sales order confirmation

Hello folks, anybody an idea about a sap standard print program and form for adobe forms concerning the sales order confirmation. can't believe that the old sap script RVADOR01 or ...01 ist still the standard. thanx for help
YES i searched the forums before posting a thread, and i didn't find relevant articles

The Adobe PDF-based forms for sales are available since Enhancement Package 2 for release ECC 6.0.
Order confirmation (SD_SDOC_FORM01)
Print programs - check package VD_PDF or package interface VDPDF_REL.

How to tigger SISCSO01 Idoc for sales order confirmation

Hello Experts,
I have a requirement where in I need to send the sales order confirmation as an IDoc. I need to use SISCSO01 IDoc type for that.
Can any please tell me how to configure SAP to trigger this IDoc when ever a sales order is confirmed.
In which T-Code is this sales order confirmation is done? and how to trigger the IDoc?
Thanks,
Suma

Hi Suma,
We need to maintan BD64 and WE20 with the Idoc SISCSO01 type. This is will automatically trigger the Idoc when we create a sales order.
You need to matain NACE for tiggering the IDoc. For that use BA00 in output types and configure program RSNASTED, from rotine as ALE_PROCESSING. In default values give transmission medium as ALE and parter function as SP.
Then come back to NACE-Condtion records and maintain meduim as A and date as 4.
Please reward if helpfull.
Thanks,
Srikanth

Releasing credit sales order confirmation

Hi
We are using credit limit check. If the customer has credit issues, the sales order will get retained and the confirmation is lock. The issue is that after the released of the sales order the confirmation is not being unlock and the sales order is not taken into account by the filter of the backorder process.
Where should I verify that the sales order confirmation field is unlock at the moment of the credit release process?
Thanks a lot.

Two places you can check in the sales order, click on the document flow button on the top. Then click on status button, expand the header status. Here you can see the credit status. The other place is go to menu Goto -> Header ->status. Here you can see the credit status field carries relevant information.
Regards,

Block sales order creation based on material qty

Hi,
In my scenario i want to block the sales order creation based on material qty , how i can do this?
Example:
Material qty below 100 = able to create sales order
Material qty above 100 = not able to create SO
Thanks,
Arun

Hi
For restricting the order if it is less than a specified qty, you can maintain the 'min order qty' in material master.
But your requirement is the other way round - Restrict order if it is more than specified qty.
In this case, you need to use the following sales order exit in progran MV45AFZZ
u2022 USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
Hope this helps.
Regards
Madhu

How to get sales order number based on purchase order

hi,
what is the transaction code to find the sales order number based on the purchase order number
Regards,
Murali

Hi,
Go to Se16 (data browser), see the table VBKD, enter the PO number, if any, execute.
Prase

How to send IDoc(Sales Order Confirmation) without Message control

Hi,
I need to send Sales Order confirmation,Delivery and Invoice through ALE (IDoc's). I am asked not to use MESSAGE CONTROL or CUSTOM IDoc to send confimation.
I dont need to send a instant confirmation but i can do it at a specified time intervals.
Do we have any other possiblity other than the both?
Can you please give the steps to do, if possible?
Thank you in advance,
Gangolu.

Hi
This link may be useful
Re: Re-open EDI - ORDCHG for outbound sales order

Sales order confirmation based on Consignment stock only.

Similar Messages

Maybe you are looking for