Sales Order Free item and Credit Limit Checking

Hiii Guys,
need your help,
How to release Sales Order free item when credit limit exceeded ?
Here some info :
Customer : ABC
Credit limit : 50,000.00
Credit Exposure : 52,000.00
Risk Category : 003 High Risk
My user want to create sales order for free item for customer ABC, the customer abc credit limit already exceeded .and the item in sales order not contain any value, it should past the sales order creation. how to allow Free item past the credit limit checking ?

To reslove this issue,
I. you can create a new sales order type. for which you make the credit control de-active.
2. If you can't create a new order type and this cotrol should happen at item category level.
then try config at the IMG>Sales & Distribution>Basic function>creditmanagement>credit management/riskmanagement setting>Determine Active Receivables Per Item Category.
Regards/Rakesh Jindal

Similar Messages

Sales Order released even though Credit limit exceeded VKM1

Hi,
I have got a scenario where a Sales order has been released(Delivery,Invoicing has taken place) even though the credit limit of the Customer has exceeded.
Steps:
The user check the order from VKM1 (push button check and save), but he didn´t release it, then checking the order changes we found that it was released by his user number.
The order at the begining was blocked but after running just the check it was released automaticly.
Checking from OVAK the document type has Automatic credit control.
On OVA8 the static check is activaded and also the open orders and open deliveries
What could be the reasons as to release of Sales order even after exceeding Credit limit????
Thanks

Hi Randall,
From your description it is clear that the sales order was released by the user unknowingly, so when ever you release sales order all the sudsequent documents (deliveries&billing) would be relesased. There is no fault with the process, the user would be hidding some facts, so there is no way out. If you want to block the order again, you make some changes at the delivery level or sale order level and save it, the sale order will be blocked again. Next time see that the release strategy should be restricted for the limited users only. This can be done by BASIS consultant.
regards
prasad

VA01 Sales order (line items) and different Cost center assignment

Hello gurus,
im searching for solutions how to assign different cost center to sales order line items, but only thing that i found is the substitution (Using Substitution (GGB1) to change Cost Center assigned in (OKB9))
Trying to do this i was unable to create something that could work, since there was no Logistic.
Could somebody explain me the Line item in SO assignment to Different cost centers?
I know alot about OKB9, VKOA and other transactions, but still cant find anything suitable to solve this issue
Best regards
Laurynas

What i mean is that, on the end of every month we are gathering information for Statistical Key Figures (from Controlling) entering as CO document and then distributing the costs using KSV5 TC on Internal Orders according those entered statistical key figures.
i.e. we got INCOME 1000000 from 10 internal order, which we distribute on even percentage parts like 10 cost center, each getting 10% of the income.
I tried to create the SO, but the Profit center field, after i entered a number, was changed automatically into another.
And the posting didnt reach Controlling and the assigned Cost center. I think it is a lack of configuration.
Regards
Laurynas

Free Goods Sales Order for Charities with Credit Limit

Dear All
I have a scenario where POS (Point of Sales) has been implemented,the process of POS is ok,but the requirement of the client is they are giving some goods to charity,when ever a person comes with a special card (Issued by the company) the outlet will create a sales order for the same without any charges with a credit limit of 1000 SAR (saudi arabian riyal).
Requirement
1) Creation of sales order with delivering goods but without any charges.(should have effect in Stock)
2)These charities is been treated as Customer with a credit limit of SAR 1000 (whenever the credit limit exceeds system should block the order)
how this scenario can be mapped in SD,
Thanks in advance
Malik

Dear Malik
keep the process regular, which will help in blocking the charity customer when reached 1000 SAr at order level itself.
As customer need to be shown that he is not charged.
you can work on changing the display of output determination .
You can take the help of Ababer and display what ever client is asking for.
I think this may solve your query without disturbing you regular business process.
Regards
Pavan Kumar

Sales order is blocking while credit limit is exceeded ...

Dear Friends ,
Client issue regarding credit management ,
all customers are defined under low risk category ,
in OVA8 transaction code we activated
i) For Static credit check : reaction D & status Block checked & open orders , open deliveries are blocked
ii) For Oldest open items : reaction D & status Block checked & days oldest item 10 days
Issue is ,
while creating a sales order pop-showing credit limit is exceeded but it is not blocking the sales order , some not blocking the delivery . It is showing only pop-up for when it is in periods from 10-60 days in F.31 transaction code . requirement is it should be blocked .
Please respond asap ...
thanks in advance ...

Dear,
Oldest open Item check works as follows.
Say, you have set the Oldest Open Item indicator with D and Block (activated) and Days oldestItem as 1.
Then, the system will check if there are any any open accounting documents (billing documents which accounting document is created and not cleared) - and will consider the bill due date too, and will validate, if there are any open items which has crossed the billing due date, and that cross count is greater than the one mentioned in OVA8.. If any such document is there, then it will block the sales document..
say: Billing date: 10/10/ 2011
Payment terms: due in 10 days
Then, this will be treated as oldest open item after 20/10/2011..
If you are creating document on 22/11/2011, the system will block the new order as this document exceeds the count (count in OVA8 is 1; whereas, this document is older than 2 days)..
Hope this clarifies about oldest open item and when the system will block the sales order..
Check in FD10n, this will show you all details clearly..
If the credit block is set, still you are able to create delivery, check any seasonal factor or checks in financial A/R summary is maintained (if anything)..
thank you
Venkatesh

Report for Sales orders with the consumed credit limit value

Dear Gurus,
In my company, the credit check is at sales order level. We want a report which shows up the credit value consumed from the credit master by Sales order.
Going into the details, Say Credit limt is setup for a customer at Credit master for 10000 $.
I want a report showing Sales order 59235 has consumed 500 $, Sales order 59277 has consumed 1500 $, Sales order 59333 has consumed 2500 $.
Is their a report in standard SAP for the above functionality. If not, any ideas of how to achieve it?
Thank you for your responses.
Regards,

Hi,
Try the following transaction codes
S_ALR_87012218
FDK43
F.31
But if you want to a report like what you explained in thread i think in standard not available we need to develop a customized one.
Regards

Due to deleted Sales order line items and Archived Sales order is still showing as Incomplete in BW as Open Order reports because of Incorrect SAP R/3 Rejection Status("A") in VBUP table.

In a archived saler Order user had deleted Line Item and completed overall sales order. Now this sales order is archived, but it is stll appearing in BW report as open order because of deleted item with rejection Status is maintained as “A” (Not yet Processed).
We want to change this status from "A" (Not yet Processed) to "C" as completed.
I have tried to reload Archive data but due to some limitation I was not able to do it. Also I feel this will like this s not the proper way to do it.
Could you please help me to correct way to do it???
Thanks in advance....

Hi Vaibhav,
If you can get the list of Sales orders which has deleted line items and force completion status. You can manage them in BI via lookup or navigation attribute.
Just my views I am sharing .
Thanks,
KDJ

Sales Order released even though Credit limit exceeded

Hi experts,
We have here a question about credit management.
Our credit management functions very normal( That means customizing should be no problem ). But when we run background job with program 'RVKRED06'( in Saturday, it's Non-working day) . The credit blocked data will be automatically released.
Is there any reasonable explanataion for this change?
Thanks a lot in advance for your help.
Prince
Edited by: Chih-Ming Lin on Nov 21, 2011 11:21 AM

Hi,
The report is started in the background and should run after the incoming payments programs. It should release the documents when that due to an incoming payment is not required to be credit blcoked anymore.
But you probably already know this.
When you think the program is releasing documents which it should not release, you probably have an error in the program RVKRED06. Probably debugging this in a test environment, will make this more clear.
It is also worthwhile to check your customizing settings, like documents unchecked or dynamic settings of the risk category.
Kind regards, Friso

Sales order to be blocked based on customer payment terms and credit limit

Hello Gurus,
We have some requirement of credit management : Client want sales order to blocked based on payment terms if customer doesn't pay previous dues as per the payment terms mentioned customer master ,sales order , irrespective of customer credit limit credit
(i.e Even in the case of credit limit is not exceded for that praticular customer)
Looking for your inputs
Thanks inadvance
Regards
Venkat

Dear Venkata Chalapathi,
Following is the logic for your requirement.
If the check is on the basis of payment terms of pending billing documents alone, then
check DYNAMIC with Reaction C/D and Status 'checked'
Then maintain the same settings against OLDEST OPEN ITEM with Days oldestItem = 0
Now, make a sales order and system will trigger the credit check message (assuming there are uncleared documents )
Ask your abaper to find an Exit/Enhancement in this message spot and you can write a logic to check the
billing documents in BSEG by fetching the document types with 'RV' (assuming we are considering only the billing documents)
and in the VBRK get the billing date and we can get the payment term in vbrk-zterm and its corresponding date in T052-ZTAG1
If the billing date + T052-ZTAG1 value is greater than SYSTEM date , then you have to trigger the credit check message in the sales order. Else allow the sales order.
Check and revert back if there is any doubt/additional requirements.
Thanks & Regards,
Hegal K Charles

Credit Limit check on Delivery:: Sales order blocked

Dear Friends,
We have implemented credit limit check with delivery Block option in Sales order. After revising Credit limit, while user is creating Delivery again, system prompts for Delivery Block in Sales order i.e, reson for Block is Credit limit in Sales Order. then user removes resason and proceeds further.
Is there any way by which system doesn't put reason for rejection in sales order and just not allow to create delivery in system. i.e. we want to remove the step of removing reason from sales order.
Regards Krishan Raheja

Dear Krishan,
As per my understanding you require just a credit check in the sales order level, which can be implemented using credit management in sales order level . In that case system will automatically block the sales order if the credit limit is exceeded.
So you do not need a DELIVERY BLOCK reason assigned to your SALES ORDER TYPE in VOV8.
Please clarify, whether you need to block the sales order and delivery due to credit limit...
or is it just sales order which need to be blocked ?
you can get the detailed configuration steps in SDN or the same is as follows.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SDBFCM/SDBFCM.pdf
Thanks & Regards,
Hegal K Charles

Re-Cost (CK55) Marked Sales Order Line Items

My current client resets standards each quarter. They have requested to re-cost open CTO Sales Order line items and update the valuated sales order cost (EK01). I have reviewed the options available in CK55 - Mass Costing and find the processing log retrurns the following message:
   Cost estimate with status VO exists. See long text
   Message no. CK_MCSO014
   Diagnosis
   A cost estimate with the status VO already exists. This cost estimate will not be overwritten.
   System Response
   Processing continues with the next item.
   Note
   You can remove this message from the log with the customizing transaction User-Defined Error Management for Mass Costing of
   Sales Documents. The item will still not be costed, however.
Short of manually re-costing each open sales order line item. Is there a way to re-cost open CTO Sales Order Line items?
Regards,
Dewayne Wesley

I didn't realize there was a MASS Cost transaction.
Is there a MASS delete Sales order Cost estimat transaction? That would help.

Profit center derivation from sales order line item - R/3 4.7

Hi,my scenario is below
FI document generated from billing is as
DR:GL1 - its not customer AR,because i post amount to one GL instead customer (profit center is dummy)
CR:GL2 (profit center is correct)
i can see profit center in sales order line item and billing line item,why that profit center not copy to GL1?can someone advise,thanks
Best regards
renhua

Hi phaneendra Reddy ,
The substitution rule is to determine profit center in sales order line item,not for FI document.right?
because i can see correct profit center in sales order.
i know if i post debit site to customer AR,will execute a periodic run to transfer AR to profit center,but now i post debit site to a GL,dont know how to get profit center

Field added in Aditional data tab of sales order line item at screen 8459

Hi all,
My problem is .
I have appended one field in VBAP table, given it a name "WBS ELEMENT"
The field is getting displayed in VA23 as well as VA02 Transaction.
when i create sales order with the quotation reference,
the "WBS Element" of line item of quotation should get updated in "WBS Eleement " of sales order line item
This i am doing by triggering user exit.
Problem is:
Once Quotation line item get copied to the sales order line item
and the screen is in front of you with those details,
before saving sales order .
if you go at the sales order line item withou saving the document
The field i have created in the screen 8459 i.e WBS Element ,doesnt get displayed.
how could i retain the field Ihave created on screen 8459
while creating the sales order from quotation before saving that sales order.
Pleas help .

Hi Vikram,
It seems as it has been coded only to save the values into the new field that you have appended to VBAP. But before saving if the user wants to see the field, it is blank. You can try coding in PBO (process before output) of the relevant screen as follows:
1. Get the reference of the quotation. Something like XVBAP-VGBEL will give this number.
2. Get the value of Z field in VBAP by passing this quotation.
3. Copy the above value to the corresponding Z field in XVBAP (or any internal table which holds VBAP data before saving)
Please reward if helpful.
Regards,
Krishna

User Exit to make changes in sales order line item data.

Hi All,
I need to know about user exit by whcih I can make changes in sales order line item details --> Account assignment tab --> Sales order no and line item no.
I want to make changes so as to bring the active maintenance contract no and line item no here instead of sales order no and line item no. So whenever ( Va02 or Va03) we go to sales order line item and se the account assignment tab I should see the contract no there.
Just let me know the USER EXIT to do the above changes.
Points will be awarded.
Regards,
Satish.

Hi,
Please have a look at the following user exits...
1. user exit_ save_document
2. user exit_save_document_prepare
Regards
sankar

Sales order line item delete error for MTO sales order

Dear Experts
iam facing below error for MTO sales order line item deletion
"For reasons of cost management, item 000040 cannot
be deleted"
Please help
Regards,
KEdar

It looks you try to delete the sales order line item and you get this error message.
Try to put reason for rejection for the line item and save the order. This is equal to deleting the line item.
You can also refer the OSS note 14097 - Order item cannot be deleted/overwritten for further information.
Regards,

Sales Order Free item and Credit Limit Checking

Similar Messages

Maybe you are looking for