Sales order has a PO attached to it
Hi,
I need to delete a sales order with a PO attached to it. I have deleted all the line items in the purchase order but when i try to reject the line items in the SO it doesnt let me and refers me back to the PO. I know we cannot delete the PO document entirely but is there another way around this. Please explain. Thank you.
Hi,
After deleting the PO line items, you need to delete the PR line items also.
Thanks
Krishna
Similar Messages
-
How to re-trigger BA00 after sales order has been rescheduled
Dear Gurus,
Could you please kindly advise how I could re-trigger BA00 after sales order has been rescheduled?
The scenario is following:
When the sales order was completed, the order confirmation output has been sent to the customer. But later, when the ATP confirmed quantity was changed or order was rescheduled, the committed delivery date has been changed. It caused confusion, because in the order confirmation letter we sent to customer, there is a different date.
I'd like to also trigger BA00 to resend the order confirmation, but I checked the output routine, it only checks if the order is completed or not. Shall I ask ABAPer to add additional logic in the routine or there is other easier way to re-trigger BA00?
Many thanks in advance!Have you allowed multiple issue for BA00 output type? In that case, you can manually trigger it from VA02. If you are trying to have it sent automatically, then add the logic into the routine.
-
Sales order has 52 line items but in vbep some are not available
Hi,
what could be the reason for the problem;
Sales order has 52 line items but in vbep some are not available...
and some has 2 etenr as '0001' and '0002', why 2 lines in vbep for 1 posnr of order.
Thanks.
deniz.Hi,
It is possible when some of them dont have valid Schedule lines.
If they have valid schedule lines some confirmed qty should be available.otherwise we cant find them in VBEP table.
Pls check by going to sales order whether Sch.lines are valid or not.
This you can check Thru
VA03-->provide Sales Order number -->Select any line Item-->Menu item Goto-->Item-->Schedule Lines
Thanks
Parvathi -
Hi Experts,
Please help.
I am PP consultant. I have created sales order and now I am creating production order against that sales order but system shows following error.
Sales order has no CO object
Diagnosis
The production order should be settled on the sales order.
The requirements type of the sales order, however, refers to an account assignment category that does not allow settlement using the sales order (key consumption posting).
Procedure
1. Check which requirements type in entered in the relevant sales order item
Display sales order
2. Check the settings for this requirements type in Customizing
(See Control sales order-related production).
How to solve. Please help................
Regards,
Raja SDear Raja
Apart from the suggestion given already, you also need to check in OKB9 whether the cost element is maintained for your company code. Also in KA02.
thanks
G. Lakshmipathi -
Error - Sales order has no CO object "
Dear all
the sales order is made in VA01. While converting the Sales Order to Production Order via T.code CO08 an Error Message is displayed " Sales order has no CO object "
here strategy = 30 i.e Make to Stock
Please send the answer urgently
Thanks in advance
Regards - PaulHi
CO Object is added for G/L account in T.Code: FS00. Normally in Sales, Revenue account are not assigned to CO Object. You require to consult FI-CO consultant & ask the consultant to do the necessary changes.
Even, we can go & add CO Object, but it is difficult to analyse the financial implication. -
Sales order has no CO object Message no. CO323
Dear expats,
Sales order has no CO object
Message no. CO323
Diagnosis
The production order should be settled on the sales order.
The requirements type of the sales order, however, refers to an account assignment category that does not allow settlement using the sales order (key consumption posting).
Procedure
1. Check which requirements type in entered in the relevant sales order item
Display sales order
2. Check the settings for this requirements type in Customizing
(See Control sales order-related production).
i did the all required settings of
*1.KE and Requirement Class 040 in OVZH
2.OVZG whether Account Assingment Categoery-E
3.SPRO---Controlling--- Product Cost Controlling- -
Cost Object controlling- -
Product Cost by SO- ---Control of SO Related Production- Acct. Assignment Categories(E)*
But i am getting this error Sales order has no CO object Message no. CO323
please tel me how to solve the problem
Thanks&Regards,
venkatCheck the following links for the similar issues.
Sales order has no CO object
Sales order has no CO object
Regards,
Divraj -
ABAP OO sales order object - how to attach link to VA03
I'm trying to build workflow using ABAP Objects instead of BOR. I created custom object for sales order according to blog "Getting started with ABAP OO for Workflow using the IF_WORKFLOW interface". It works correctly in my workflow but I would like to attach link to "browse sales order" (VA03) to workflow step. When using BOR I can attach link my binding BOR objest to AdhocObjest step container element. The same way does not work for ABAP OO object. The error message is "The object categories 'CL' (source) and 'BO' (target) are not compatible".
Is there any way to add this link to attachments when sales order object is OO not BOR?At least make sure that you have a default method 'browse' in your class. I mean that make a method for "displaying" or "browsing" or whatever you want to happen when you click the object, and make it default. OR actually if I remember correctly there is a default method existing already, but put your code to there.
Also try this:
-Create a container element of type 'sales order' into your task
-Bind the sales order object from workflow to the the task
Regards,
Karri -
Hello Expert,
I would like to know if is there any possibility to display invoice print (PDF) in sales order (Credit/Debit note) as attachment.
Issue: Customer raise the credit note with the reference of invoice, sometimes user don't explain the reason for credit and don't attach any reference document in sales order(credit request).
Customer requirement: Customer want to display reference invoice print (PDF)in sales order(Credit request) for validator so validator can cross check with invoice and validate the credit note.
Could you suggest the best solution?
I am thinking to give mandatory text box (Text determination)at sales order(Credit request)
VipinHi,
You can enable Document Management System (DMS)
Please refer below links for details:
http://scn.sap.com/thread/459101
http://scn.sap.com/thread/2096563 -
Adding one specification sheet after sales order has been generated
Hi Experts,
Our client is asking to introduce one specification sheet to have the review on the particular after getting sales order,
How can we introduce the specification / review sheet, they want to have this before MRP run,
Please suggest the method,
ThanksYes it has been answered
-
Send sales order as mail - pdf attachement - print data
hi folk,
When receiving a Sales Order as PDF document, the name of the document is called "Print data.PDF".
Is it possible to change this name to e.g. sales order number or something else.
Best regards
Linghi,
when I'am receiving the sales order as PDF file the "Subject" of the mail is shown the e.g. sales order number retrieved from the output communication method --> Cover page text --> "Sales order &XNAST-KSCHL&.
But my question is, how I can change the name of the PDF file which is now called "Print data.PDF" .
Best regards.
Ling -
How to attach a MS Word document to Quotation/Sales Order?
Hi all
Can somebody let me know how to attach MS Word documents in Quotation (VA 21) or Sales Order (VA01) screensHi,
Please use the "Services for Object" Icon just below the menu bar in the Sales order overview screen for attaching any document into the sales order. Once you get into the drop down, select Create - Create Attachment" option.
The attachment can be viewed from the same icon! In the drop down, select Attachment list!
Hope, this helps!
Thanks
Siva
Sorry,when I opened the message for replying, no one had replied till then. ***
Message was edited by:
Sivasubramanian Senguttuvan -
Condition Type to be excluded whil creating Return sales Order from invoice
Hi Frnds,
I have the following requirement.
Sales order order is created and its delivered and invoiced too. This sales order has some freight pricing condition types (RCD1, RCD2...)included since its shipped to customer.
When the customer wants to return the goods, there is a return sales order is created with reference to the invoice created above. Now, the RCD1 and RCD2... should not get copied to return sales order.
How do i achieve this? Please let me know any user exit, BAdi or Enhancement spot where i can add code to avoide these condition types from being picked up.
SAP system is ECC 6.0
Regards.,
Karthick CIt can be achieved by implementing a custom requirement routine. If you go to the the transaction VOFM, you will find "requirement" in MENU. You select 'Pricing' on drilling-down it. Following document may help you in creating requirement routine..
http://saptechsolutions.com/pdf/VOFMCopyRequirementRoutines.pdf
All requirement routines has similar pattern of writing... Your code may look like as follows:
FORM KOBED_901.
sy-subrc = 4. "By deault condition is false.
If NOT XKOMK-AUART = 'RE'. "RE is returing order type.
sy-subrc = 0. "This means For other than returning orders all others condition is true.
endif.
ENDFORM
Once you activate routine, ask functional consultant to attach this to the Condition RCD1 and RCD2. Then, You'll not get RCD1 and RCD2 for Return sales Order.
Please check and confirm and revert back if you want further details..
Edited by: Pikle Audumbar on Oct 17, 2009 1:09 AM -
Link DMS document to Sales Order
Hello -
Currenlty, our Quality Department manually opens each applicable sales order and manually attaches a required document via the "Extras/Documents" path from within VA02 menu bar. It is extremely time consuming.
I want to know if it is possible to automatically attach a "linked document" to a sales order after it has been saved? I'd like to create/run a batch job that loops through these sales orders, and if applicable, attaches the "linked document". DMS is setup and working and the document that I need to attach is ready. I don't know where I need to put the record of this "link". I can see all of the "links" via CV03N (Object Links/Sales Document Item), but I don't know how they get there.
Any advice or link to documentation would be greatly appreciated.
Thanks,
BryanBenakaraj ES -
A few more questions with BAPI_DOCUMENT_CREATE2.
Here is the FM. Can you assist in helping me establish which parameters I need to provide?
Example:
Sales Order: 2142342 with one line item.
Document:
TYPE: ZQN (DRAW-DOKAR)
DOC: QZ6 (DRAW-DOKNR)
PART: 000 (DRAW-DOKTL)
VER: 00 (DRAW-DOKVR)
CALL FUNCTION 'BAPI_DOCUMENT_CREATE2'
EXPORTING
documentdata = ls_doc
HOSTNAME =
DOCBOMCHANGENUMBER =
DOCBOMVALIDFROM =
DOCBOMREVISIONLEVEL =
CAD_MODE = ' '
PF_FTP_DEST = ' '
PF_HTTP_DEST = ' '
IMPORTING
documenttype = lf_doctype
documentnumber = lf_docnumber
documentpart = lf_docpart
documentversion = lf_docversion
return = ls_return
TABLES
CHARACTERISTICVALUES =
CLASSALLOCATIONS =
DOCUMENTDESCRIPTIONS =
OBJECTLINKS = lt_drad
DOCUMENTSTRUCTURE =
DOCUMENTFILES =
LONGTEXTS =
COMPONENTS =
I see that there is an objectlinks table which I assume is used to create the link between the document and VA02/VA03. The underlying structure for the objectlinks table is BAPI_DOC_DRAD. I'm not clear on what values I need to add to this table when calling the BAPI_DOCUMENT_CREATE2. FM.??
Any advice on how to fill stucture BAPI_DOC_DRAD?
Also, I don't want to create any documents. The document already exists. I just want to establish a link. Can I do that without creating a document that already exists?
Thanks,
Bryan -
Regarding: table having block stock field sales order wise
Hi,
I am working on report in which i have to display the block stock sales order wise ,i had used to tcode MB52 and MMBE and i was first using table MCHB and MARD ,it displays only the bocked stock ,but when i click on special stocks icon in tcode MB52 n execute it the qty displayed in that is not being able to be displayed in the tables MARD n MCHB.
right now i am using table MSKA and varifying it with MB52 tcode.
PLZZ HELP ME OUT BY telling me which table to be used for displaying the block sales order wise.
Edited by: ric .s on Mar 6, 2008 11:19 AMHi,
Try out this.
DATA: is_object TYPE sibflporb,
it_relation_options TYPE obl_t_relt,
is_relation_options TYPE obl_s_rolt,
gt_links TYPE obl_t_link.
is_object-instid = <sales order number with leading zeros>.
is_object-typeid = 'BUS2032'.
is_object-catid = 'BO'.
*u201Ddocument relation
is_relation_options-sign = 'I'.
is_relation_options-option = 'EQ'.
is_relation_options-low = 'ATTA'.
APPEND is_relation_options TO it_relation_options.
TRY.
CALL METHOD cl_binary_relation=>read_links
EXPORTING
is_object = is_object
it_relation_options = it_relation_options
IMPORTING
et_links = gt_links.
ENDTRY.
GT_LINKS should be filled if sales order has attachment.
Regards,
Sudhakar -
Two Purchase Requisitions created on MRP for one Sales Order
Hi,
A Sales Order has been created with one schedule line and one delivery date. When MRP is run it creates 2 Purchase Requisitions. The material in the Sales Order is a Prepack Material and has a component attached in the BOM. Please advice as to why the order is splitting when MRP is run and also why 2 PR's are created.
Thank you for your help.Please check in OVZG................assembly type........if u maintained .3 or 4. It may be the reason
Dynamic assembly order ---SAP HELP DOCUMENT
If you create a sales order for a material with the 'assembly processing' technique, the system carries out an availability check for the components needed for the assembly. Depending on the results of the availability check, either one or several procurement elements are created. The quantity for a one-time delivery and/or the next possible deadline for a full delivery and/or a delivery proposal with then ext possible deadline are displayed on the availabililty control screen.
Maybe you are looking for
-
Scaning issue using iPhone AiO Remote app v4.3
Following 4.3 update on iOS, scaning is no longer working using tray, the app conects to the scanner, it initiates the document feeder to scan, pages get scanned trough, but the application reports failure and displays message to check printers contr
-
Is it possible for the JDBC Lookup in PI 7.1 to read other user's table?
Hi, I have the requirement of using the standard JDBC Lookup in PI 7.1. The user setup in the receiver JDBC adapter is only a service user that has a read access on some tables that are owned by another user or schema. When I am trying to do the impo
-
How to syncronise with my mobile (ericson, nokia etc.) on MacOSX
hi there anybody outthere who knows how to syncronise with OraCal and a mobile (without a palm or handheld), such as ericson, nokia, siemens etc.? I've read about OracleSyncServer? Where is this SyncServer for download, are there howto's. Does it nee
-
Osx lion hangs when installing
Downloaded osx Lion yesterday and tried to install it on macbook pro 15" bought in Jan, and the progress bar hangs at the start and stayed all night without installation, although i have updated to the latest Snow Leopard etc...and followed all the s
-
Using existing c code for usb-hid communicat​ion in labview
Hello, I want to write a simple temperatrue logger using labview and a external hardware which communicates over usb-hid. The external hardware uses an ATMEL 90USB162 µC and DS18B20 sensors. Link to the hardware: http://www.diamex.de/dxshop/USB-Tempe