Sales Order Stock (For Repair Returns) - Valuated & Non-Valuated

Greetings All,
We are currently using sales order stock as quantity only for customer returns for repair (RMA Sales Order). As long as we do not give a credit to our customer, this is working. My problem is that some of our customers are requesting credit... This requires that the inventory now be valuated. I want to keep the link with the sales order (RMA). Is there a way to do this?
Thanks for reading!

Thanks for your quick response Ajay.
I am aware that I can move it to unrestricted stock but I would lose my link to the RMA sales order. Correct?
We currently are not using split valuation.
Any other suggestions?

Similar Messages

Valuated sales order stock for configured material

Hi All!
I have a small problem : I created a new type of material (OMS2) - a configurable one, managed on quantity and value basis. I work with valuated sales order stock for configurable materials but the account in the purchase requisition is determined by means of event key GBB insted of event key BSX.
Where is my error?
Any idea would be appreciated.
Florina C

Hi
I think you are talking about Special Stock "E"...ie) Sale Order Stock...
If my understanding is correct then,
If you go and see the Table T156....For the
Movement Type: 101,
Special stock Indicator : E,
Qty. Updation Checked,
Val. Updation Checked,
Movement Indicator : Against PO,
Consumption Indicator: Sales Order Stock.....combination....the transaction Event Key....GBB only has been Assigned....these settings you cannot change...
This linkage you can view in OLMW-----> Account Determination -
> Acc. Determination W/O Wizard -
>Account Grouping....also
Reward if useful
Regards
S.Baskaran
Edited by: baskaran srinivasan on Dec 20, 2007 12:18 PM

Valuated Sales Order stock for Semi-Finished Products

Dear Gurus,
One of my client faced the issue that the semi-finished products is valuated-sales order. We are in Mill Industries, downstream (steel processing). The situation is:
1. We use configuration material for both finished and semi-finished products. Both are valuated at standard costs with valuated sales order stock.
2. Once the sales order is created, the cost estimates are created for both Finished, and semi-finished products.
3. The production orders is created for the semi-finished products. During production, several semi-fg and fg can be manufactured at the same time. We are using the co-products feature to cover that.
4. During the goods receipt of semi-finished products, instead of using the standard costs in sales order cost estimate, it use the planned costs in production orders which against our design.
I tried to use the user exit COPC002 and influence the standard costs. But it seems that the routine is not called for semi-fg at all. Anyone has any light on this?
Regards,

Hi
I think you are talking about Special Stock "E"...ie) Sale Order Stock...
If my understanding is correct then,
If you go and see the Table T156....For the
Movement Type: 101,
Special stock Indicator : E,
Qty. Updation Checked,
Val. Updation Checked,
Movement Indicator : Against PO,
Consumption Indicator: Sales Order Stock.....combination....the transaction Event Key....GBB only has been Assigned....these settings you cannot change...
This linkage you can view in OLMW-----> Account Determination -
> Acc. Determination W/O Wizard -
>Account Grouping....also
Reward if useful
Regards
S.Baskaran
Edited by: baskaran srinivasan on Dec 20, 2007 12:18 PM

Issue with sales order stock that is referencing a non-existing sales order

We have an issue with sale order stock.
Due to user error we have ended up with a negative quant of sales order stock in a bin. Further the error was due to mis-keying of sales order number. Hence this negative quant is referencing a sales order that does not exist.
We need to get rid of this quant.
I thought of cycling this quant off as a solution. And hence replicated the scenario in the test system. I was able to create a TO to cycle it off but cannot clear the differences from 999 . The error I get while trying to do this is "SD document not in database or has been archived" . This error is true since the sales order actually does not exist. So cycling it off did not work.
Can anyone suggest how we can get rid of this negative quant of sales order stock ?
Thanks

Hi,
You said that your user mistyped the SO number and it resulted in a -quant. In which transaction was it possible? If I give a non existing no. SAP doesn't allow me to book.
If I were you I would check both in WM & IM what the user had done...step-by-step...
Negative quant comes to existance in interim storage type if we book e.g. a GI. It should have started in IM...how was your user be able to do that??? If it was possible cannot you reverse the IM booking?
(...if all else fails...cannot you create a SO document with external number assignment with the same number?...)
BR
Csaba
Edited by: Csaba Szommer on Jun 24, 2008 8:31 PM

Reserving the sales order stock for a customer

Hello SAP gurus !!
My client is wants to Reserve the stocks once the order is placed or confirmed by the Customers.
For Example; --
If 10 c/s are available in the plant and a customer has ordered 10 c/s... next time .. if someone is creating order for the same Material, system should not confirme sales Order as this particular stock has already booked by the customer.
Can we MAP this scanario in creating DUMMY sales order??
I have also tried to move the sales order stock to Reserved Stock by creating Reservations (Tcode MB21) using movement type 412 E.
but i m not sure whether i m on the right way or wrong??
Please help me on this particular issue. Points will be rewarded for Helpful answers.
Thanks in advance.
Regards,
MAYANK

Hi Ravi
Actually we have started this particular issue with Product Allocation only.... but the problem with product allocation is : you can not reserve/block the stocks even if it has been allocated to other customers.
If some other user is creating the sales Order for some other customer, system will confirm and you can do the delivery also.
Basically Client want to first allocate( here allocation could be through creation of Dummy Sales Order also) then also want to BLOCK /RESERVE for those customers... so that nobody should be allowed to use those Stocks.
We have Already tried with:--
1. Product Allocation
2. OVZ9 ( checking Group 02/ Sales Order Combination)
3. MB21 ( creating Reservation with Movement Type 412 E)
4. Consignment Process
& some other Options but exact requirement has not been met.
Now we are trying to solve this Issue using some scenarios Other than Prod Alloc.
I hope i have clearly explained the requirement still you have any doubts, please revert back.
Thanks in advance
Warm Regards,
MAYANK

Prevent Third Party / Sales order stock for blocked vendors

Hi Experts.
We have scenarios for Third party processing and Sales order stock. We have a scenario of a fixed vendor for a material. The purchasing function frequently does block vendors for purchasing.
However, we find that this does not prevent creation of a third party / sales order stock item in the sales order and a PR is generated. It is only found during the PR --> PO conversion that the vendor is blocked at which time someone has to manually reject the line items.
Is there a way to prevent the system from being able to generate a PR for a blocked vendor ? I guess one possibility is to enhance the requirement routine for PR creation. Is there any other approach ?
Appreciate your help
Regards
Rohit Zalani

Hi
In MK05, block vendor for all Purchasing org and Select Block Function = 03 Block quot. req., order, goods receipt
If you do this setting then user will get error message that "Vendor is blocked" and "Purchase requisition could not be generated for component".

Sales order Stock for Subcontracting operation

Hi
I have MTO Scenario.
I have created Production order with external operation and component will be sent to vendor.
This component is sales order specific (Indiviidual).
But after MRP system generate normal PR with no account assignment for component.
Please explain why it is not creating sales order specific PR for that material.?
Is any config is missing?

Hi Vivek
Special stock indicator is available in production order for that component. Then also system is creating PR without sales order account asignment.
Opeeration to which this component is attached is sub-contracting operation and material will be sent to vendor.
Iam getting MRP element with SUBREQ

Non valuated sales order stock vs valuated

When we went live in 1999 we used non-valuated sales order stock for our MTO process.
I really need to create and save cost estimates for configurable material (an average build) using CK51n. It does not work with non-valuated stock.
Does any know if I can some new part numbers be valuated while the standard process stays non-valuated? A new material type with new rules??
I wasn't here in '99 so I don't know what was involved in setting it up, nor in changing it

Following different option

Non valuated sales order stock explanation

Dear All,
Can anybody explain me Non valuated Sales order stock briefly.
I know some of the basics about this scenario but i would like to know more about this scenario.
appreciate your explanation.
Regards,
kishore.

With non-valued sales order stock you must also enable the sales order as a cost collector. All costs and revenues can then be assigned to the sales order. Goods movements for the finished good are performed and quantities tracked, however, the goods movement have no value and no financial impact.
For example, you manufacture a product and all the cost to manufacture the product are assigned to a production order. You do a goods receipt to record the produced quantity and the inventory quantity of the sale order stock is increased. In a valuated sales order environment, this transaction would debit inventory and credit expense. In the non-valued sales order environment, no financial posting is made and the costs remain on the production order.
When the goods are later sold, the quantity is removed from sales order stock, but again no finacial posting is made to account for the inventory since it is non-valued. The only financial posting would be to charge the revenue amount to the sales order with an offset to A/R. So at the end of these transactions all the cost and revenue are residing on the production and sales orders. You do have the option of settling those amounts to COPA.
thanks,

Cost of Inventory for Special Stock- (Sales Order Stock)

Dear All,
We manufactures "x" materail under Make to Stock and Make to Order Scenarios. We carried the standard cost estimate through CK11N and released through CK24N. There is a value of "X". Also we carried the sales order cost estimate that is value "Y". But we have observed the inventory value updated during confirmation of the production is at "Z" value. We have identified this Z value is the value of special stock previous periods.
I would like to know the procedure of valuation of inventory under scenarios
Regards
Anilkumar

Hi,
thanks for your info.
Can i say the changes will be done for those special stock.?
Actually my problem is related to a Return Sales order process where we need to change the MAP before DO and GI, otherwise the Material document would not capture the correct MAP during GI.
and the solution from the senior is select the variance "special stock -Sales order" and enter the sales doc# in MR21.
The problem that we are not yet having any special stock for this return Sales order, but this MR21 works for us and after that, the material document is able to capture the correct MAP.
Any idea what or where the MR21 is updating for the "Special Stock-Sales order" if we don't have any Sales order stock for the paticular sales document?

Valuated Sales order stock with CO Production Order

Dear All,
Our clinet is manifatcuring cables and having 2 plants, for one plant we have configured PP module so we are arriving valuated sales order stock, for another plant we didnt configured PP module so we planned CO production order, but where as we are not meeting our ultimate goal i.e; valuated sales order stock.
So please guide me how to arrive valuated sales order stock with CO Production Order.
Thanks & Regards
Narasimham T

Valuated sales order stock is not dependent on PP, so you should be able to still to use it. The requirements class associated with the sales order item determines whether the item is valuated sales order stock and it also determines the valuation method. If you do not have Boms and routings in this plant you can still value the line item based on the material valuation in the material master. You can also value it based on a unit cost estimate that can be created seperately for the sales order item. Justt make the desired settings in the requirement class.
thanks,

Stock determination for sales order stock

Hi all,
for our SAP retail solution - we have requirements for moving Consignment stock to Sales order stock for home delivery . Then Sales order stock needs to be withdrawn for inter company 643 movement . The stock determination is maintained as K first & then F with relevent settings in SPRO & article master, for consignment article -when sales order stock exist & delivery is created for intercompany PO with sales order on account assignment to transfer stock from Store to DC, SAP error message is not allowing to post Goods issue.
What settings do we need to maintain for this to happen to withdraw from Sales order stock for consignment article ? Any help or information is highly appreciable.
Thanks
Krish

This is the error message :-
After calling stock determination, a quantity of 1.000 EA remains open
Message no. WRF_CONS013
Diagnosis
During consignment processing in SAP Retail, the system called stock determination in order to decide which stock category should be used to take material 000000001000009740. However, the stock determination routine did not find enough stock in the relevant stock categories (as defined in the strategy). A quantity of 1.000 EA remains open.
Please note that stock determination ignores the Negative Stocks Allowed setting.
Procedure
Check your stocks and settings for stock determination for material 000000001000009740 in plant 3001. Post stock transfers if necessary

Stock determnation for sales order stock

Hi all,
for our SAP retail solution - we have requirements for moving Consignment stock to Sales order stock for home delivery . Then Sales order stock needs to be withdrawn for inter company 643 movement . The stock determination is maintained as K first & then F with relevent settings in SPRO & article master, for consignment article -when sales order stock exist & delivery is created for intercompany PO with sales order on account assignment to transfer stock from Store to DC, SAP error message is not allowing to post Goods issue.
What settings do we need to maintain for this to happen to withdraw from Sales order stock for consignment article ? Any help or information is highly appreciable.
Thanks
Krish

Hi,
It seems in delivery in picking tab automatic storage location not determined.
If not determined Please do settings in SPRO>Logistics Execution>Shipping>Determine Picking Location>Assign Picking Locations.
Before doing above step whether the item category is relevant for picking or not ?
Hope this would help.
Regards,
JS

Standar report to see the sale order stock collectively

Dear Gurus,
Is there any standard report available to see the sales order stock collectively.
I can see the sale order stock in MMBE. But disadvantage is, at a time i can see a single material only.
I would like to see the sale order stock for more than 1 materials.
For example MB52- Collective inventory stock can be seen

Dear,
You could check sales order stock using MB52. Tick Also Select Special Stock and fill special stock indicator ='E'
You can check in MMBE t.code by enter material and execute....& see ur slaes order stock in On-order stock segment also try in CO09
Regards,
R.Brahmankar

Make to Order - where is Sale Order Stock

Hi All
I have a Configurable Product, say Book. The Customer places the Order say for 1000 Books but does not give the details of the Ship-to parties. The Order is taken into Production and the Ship-to particulars are available one day prior to the despatch. The requirement is that the User has to create multiple Ship-tos in 1 Sales Order (Costing, Wastage calculation etc., is done Sales Order-wise) and will enter the Quantities for the Ship-to parties only when he receives the despatch instructions from his Customer.
The Sales Order initially is created for 1000 Nos with no Ship-to Party being entered at the Item level (Item No: 10, Material # Book; the Classification editor contains the required Characterstics when the Order for 1000Nos is entered for the first time). The Order is produced and the Stock is available as Sale Order Stock for 1000 Nos. When the despatch details are received, the Ship-to parties are entered in the Sales Order {Sales Order entry will now look as: Item # 10, Book, 700 Nos for Ship-to # 1 and Item # 20, Book, 300 Nos for Ship-to # 2}. When the 2nd Line Item is entered in the Sales Order, the Classification Editor opens once again, though this is ignored and no values are set.
Issue:
a) Delivery could not be handled through VL10; it had to be done through VL01N.
Delivery could be created and PGI done for Ship-to # 1 only but unable to do PGI for 300 Nos for Ship-to # 2. The error I get is that there is no Sales Order Stock (1000 Nos have been produced initially and after doing PGI the balance of 300 Nos (meant for Ship-to # 2) is getting displayed in MMBE but is appearing as Item # 10. The Requirement Class is shown as KEM in the Sales Order.
b) When the 2nd Line Item (Item # 20) is entered in the Sales Order, the Schedule Line shows about 7 days into the future although Sale Order Stock is available.
Have I missed something?
Regards
Ramana ND

Manoj
The so-called 2nd Line item is nothing but the same Material and this Quantityis already available in Sale Ordertock (part of 1000 Nos); this had to be shown as a 2nd Line Item coz there is a different Ship-to party. Btw... the requirement Class type in the Procurement Tab in VA01 for both the Line Items shows KEM...
My question is: why is the so-called 2nd Line Item is being treated separately? The Order is for 1000 Nos and all I am doing is splitting the Quantity between the 2 Ship-to.. The Sales OrderStock clearly shows 1000 Nos which I am not able to Ship-to #2 coz Item # 20 does not show Stock in MMBE ... Only Item # 10 has Stock of 3000 Nos ...
Regards
Ramana ND

Sales Order Stock (For Repair Returns) - Valuated & Non-Valuated

Similar Messages

Maybe you are looking for