Sales order(VA01) discount not calculated

Hello Gurus,
As Iam creating Sales order i.e VA01 in our business scenario the discount should be calculated but here the discount is not calculated. It was adding the discount value i.e 100+2=102,but it should be 100-2=98.I have checked the pricing procedure also.
Please find below I have attached the screen shot.
So please give me solution Asap.
Regards,
Sukdev
Message was edited by: Olaf Seidel

Hi Sukdev,
In T code V/06, please check the condition type ZDIP-->In field plus/minus the value should be X

Similar Messages

Sales order(VA01) discount value not calculated

Hello Gurus,
As Iam creating Sales order i.e(VA01). In my sales order Cash discount is not deducting .It was adding the discount value for example(100+10=100). but it should be (100-10=90).I have checked the Pricing procedure also.
Apart from that can we used two condition type for same order
Please find below I have attached the screen shot also.
Regards,
Sukdev.

Dear Neel,
As I already maintain that Condition type in Pricing properly as to told in the above point.So then also it was not updated in my sales order.
Regards,
Sukdev.

Free goods Not determine in Sales order(VA01)

Hello Gurus,
As Iam Creating Sales Order(VA01). In the back end I have done each and every configuration regarding free good determination then also the system is not determine the free goods
Apart from that Iam going through Exclusive free goods.
So please give me the Solution where Iam missing.
Regards,
Sukdev.

Hello Gurus,
As Iam Creating Sales Order(VA01). In the back end I have done each and every configuration regarding free good determination then also the system is not determine the free goods
Apart from that Iam going through Exclusive free goods.
So please give me the Solution where Iam missing.
Regards,
Sukdev.

Changes in Netprice(KOMP-NETWR) While Creation Sales Order(VA01)

Hi expert ,
My issues while creating sales order(Va01) is :
i have added two conditions types namely YVAT and YNBT in Condition , while calculating netprice (NETWR) its picking both values for YVAT and YNBT , i want only netprice excluding YVAT and YNBT , for example
NETPRICE is 3000.00
YVAT      is      50.00
YNBT      is       30.00
NET         is       3080.00
but i want to display only 3000.00 in NET(KOMP-NETWR)
please suggest is there any user exit to do this calculations.

Hi,
I'm not sure if you need to update ADRC table - the address number is usually the the customer's address and is picked automatically.
Also the transport zone is picked automatically based on the customers address or on the shipping conditions in the Sales Order.
Transportation Zone (LZONE) also exists in the partner function (VBPA) and the shipping partner (VTPA) - in case you need to suggest a different route for shipping other than the one determined automatically.
To change this - change both the internal tables table xvbpa and xvtpa (after reading with sales order and item from structures vbak and xvbap) in USER_SAVE_DOCUMENT_PREPARE in the include MV45AFZZ.
But, I'm not sure if the Address Number (determining the shipping point) would be independent of the Transp Zone, though it's changed in the exit.
Regards,
Anil.

Sales order with discount

Dear All,
I need to create sales order with discount (30%) , based on the volume, if total sales is over $5million per annum.
I like your help , if you could kindly indicate complete Prerequisites and Process flow, for this sales order.
Thanks.
Naz

Hi
i want to clear u about the difference between discount & rebate.
Discount is always calculated in the sales order where as rebate is at Billing document.
If u want to give a discount then u have to give it in sales order level.....
u said that u want to give discount of 30% if the annual sale will reach $ 5 millon.
u will not process all the sales order for a year at a single point of time.
in that case u will not give any discount....since u r processing the sales order through out the year.
u can make a rebate agreement for that, in which u can maintain 30% rebate.. rebate amount will accrued and when ur customer reached $5million mark u can go for partial settlement or in the end of the year u can go for final settlement through credit memo.
so instead of discount u have to maintain rebate agreement.
I hope it will help u.
Regards
Dibya

Sale Order VA01

I trying to create sale order VA01 with reference of contract but contract not showing when I search.Can you guys help me to find out how to assign the contract to a sale order.
Thanks

Hello Sunil,
Contracts can be created in Tcode- VA41, Enter the document type according to your requirement. There are many kind of contracts such as quantity contract- QC, general value contract- WK1, Material related contract- WK2, Service contract - SC, Rental contract- RC or QP and master contract- GK.
Key in the required details and save the document. Create the sales order in VA01, click select with reference, you will find the pop up window where you will get six tabs, amonst em click on contract and enter the selection criteria and you will find your saved contract. If you want to change the quantity or value click on item selection which lets you to change the detail or else click on copy button.
This how it works. Let me know if you have any doubt.
Regards,
Jay

How to create a Contract with reference to a Sales-Order(VA01) with a BAPI

Hi,
my name is Wadim and i need help.
My problem:
I am creating a sales-order(VA01) with the BAPI 'BAPI_SALESORDER_CREATEFROMDAT2'.
After that i have to create a contract(VA41) with reference to this order. I found the BAPI "BAPI_CONTRACT_CREATEFROMDATA" and it has the same interfaceparameters like the salesorder-bapi. but there are no parameters to get a connection to the sales-order.
Is it even possible to get a connection to a sales-order with a bapi???
thanks for help
regards mark
Edited by: Krapp Wadim on May 20, 2010 9:19 PM

Hi Wadim,
I have a similar requirement to create order lines in an existing contract with reference using BAPI_CUSTOMERCONTRACT_CHANGE. The order lines get created in the contract. However, the condition types from the order line which i'm referencing are not getting referenced and are not getting added in the Contract's line after referencing.
Did you come across any such issue ? If yes , could you suggest the solution ?
Regards,
Venkat.

Sales Order (VA01)- Addtional Data Tab B Request

Hi All,,
This is sales order(VA01) relevant and I have added the new "ZZFIELD" field in the "Additional data B" which i kept screen painter attributes check box chosen "Input Field" and Input "required".
When i am creating sales order(VA01), the moment click on "addtional data B" ZZfield become mandatory input field able to save sales order sucessfully after keying data. But user want's, after enter line item data which is material & qty , then cursor required to go additional data B which is mandatory field ZZFIELD. Right now, user enters line item material , qty and he is able to save it Sales order and cursor is not going or waiting at ZZFIELD in addtional data B Tab(unless and unitl he press Additional data B Tab) .
Is there any solution after user enter material and qty after clicking enter cursor should go "Additional data B" wait at "ZZFIELD"(as this mandatory field before sales order save) ?
If we dont go the Additional data B and save the document , it's not giving the message "Make an Entry required fields and it is directly saving the document.?
Any help is highly approciate ....
Below code written already:
Program:SAPMV45A screen :8459 put PBO code as per below:
Loop at Screen.
If screen-name = 'VBAP-ZZFIELD'.
if SY-TCODE = 'VA01' AND ORDERTYPE = 'ZSS'
    SCREEN-INPUT = 1.
   MODIFY SCREEN.
ENDIF.
ENDIF.
Best Regards
Kushal

Hi   Abdul ,
You dont have to do ny extra coding for the scroll bar once the no of fields increase with respect to the tsb screen area it will automatically have a scroll bar in it .
Hope it helps
Regards
Swapnil

Create Sales Order - VA01

Hi!
I'm trying to create a sales order VA01 with reference to a quotation QT, I get the error "Version 0 is not defined for the fiscal year 2011.
Thanks
Sunny

Hi,
Goto the T.Code "OKEV".
Enter the Controlling area.
Choose Append.Select "Version".Enter.
Enter Controlling area and version "0" and enter.
Choose item and double-click on "Settings for each fiscal year".
Choose last year item and press key F6.Copy.
Change the fiscal year.Enter.
Save.
Regards,
Krishna.

Open Sale Order Value (FD33) not getting diminished even after closing SO?

Hi,
Upon Executing FD33 and clicking the status view for a Customer say XYZ , and then choosing EXTRAS-Open Sale Order . Say the value of open sale orders being shown is 75000. Even after closing the open sale orders (By Selecting VA05 and Putting reason for Rejection), and then also the Open Sales Order value is not getting diminished.
What could be the reason ?
Pls help.
Regrds,
Binayak

Hi Binayak,
As mentioned by you, running of Credit re-org program 'RVKRED77' is the only solution for this problem and it is known problem in SAP.
Some precautions
1. Always run the program in background by scheduling a job.
2. The idle time is around midnight when no user is working on SAP.
3. Some time the job fails as some other program may be updating same tables as this program. In such cases re-schedule the job at different time.
4. You may run the program 'RVKRED88' which will simulate without actual updation of credit values.
Hope this clarifies..
Regards,
Madhu.

Sale order no . can not be displayed in md04

HI ALL
sale order no . can not be displayed in md04
Surendra

Hi
What ever line items displayed in MD04 are relevent for MRP.
If yoursales order is not displayed , it is not relevent for MRP. Pl. coordinate with your SD collegue for configuration of sales order .In that pl. chk schedule line category.
Pl. chk these items.
Regards
YMREDDY

Why some times delivery will created through vl10c even sale order stock is not available?

Hi,
why some times delivery will created through vl10c in batchmode even sale order stock is not available?
Thanks,
Kalyan.

the correct english name is : Replenishment leadtime
Check with Replenishment lead time - Supply Chain Management (SCM) - SCN Wiki

Sales Order number is not showing in MD04

Hi Gurus ,
I have got one case where Sales order number is not showing in MD04 screen . This sales order , line item has already delivered , PGI & billing document also been generated . Moreover accounting document is also been created .As cheeked & found that it is not shwoing in MD04 screen because at the time sales order creation availability check “01” was maintained which has sum up all the requirement in one particular day ( Also as
per SAP note -70408) .
Now because all the subsequent document has been generated for sales order so we can not mark it for “Rejection for rejection “ & to create new sales order with availability check “02” in material master .
Please let me know the possible solution for the same or if any sap note would be required to get the sales order number in MD04 .
Thanks ,
Aman

Hi Kiran ,
Actually before running the report in “SDRQCR21” in PRD I wanted to run it in “Quality “ .
In quality I am not able to simulate the same .
Please refer below points related to my testing result .
1.Mainatined availability check group “01” .
2 . Created Sales order
3. Check in MD04 screen & as expected sales order was coming blank with negative Qty .
4. Run the MRP which generated PR
5. PR converted to PO & GRN was done which updated the stock
6. Created delivery & checked the same in MD04 . It was also coming blank . No delivery document numbe was showing in screen but it was coming with negative Qty .
7. Done the PGI & blank delivery document number was removed & it become normal .
In PRD .
There are 3 sales order
One sales order is already marked reason for rejection & two sales order delivery , PGI has been done .
But still it is showing blank sales order with negative Qty & after MRP run it is generating the PR also .
I don't why it was showing with negative values .
Please refer attacehed screen shot .
Thanks,
Regards ,
Aman

In Sales order plant is not allowing to change

Hi Guru's
In Sales order plant is not allowing to change it's showing gray but some materials it's allowing to change plant. What is the reason for this error can any one please help me.
dnr

Hi friend,
I suppose you cannot change the plant at order level if the material is created to a particular plant.
As you say for few materials you are able to change, may be due to the fact that the material is extended to the other plants. You need to extend the material to the other plant in MM01 enter tha material and enter the industry sector and Material type and give the same material as the copy from material. A screen will pop up asking for the plant details. Here you can enter the other plant and tha material is extended to the other plant.
Regards

Error in Sales order - Consumption account not found

Hi Gurus,
I am facing an error in Sales order - 'Consumption account not found'. The scenario is third party. In sales order, it says 'Consumption account not found'. the item category is TAS and scedule line category has general modification key 'VKA'. And as it is third party, thr is no movement type for the schedule line category. The valuation class of the material is 3334 (software services). I was thinking In OBYC, under GBB key, this combination of my val. grping code+ 3334 + VKA and relevant GLs shud exist.
But in my development client, i dont get any error for the same material. And in thr also, thr is no mention of entry like above combination in OBYC. So its making me think that its not config error. But its an issue of master data or GL data.
Please help me . This is critical.
-Prashant

Hi,
Your observation is perfectly write, the possible errors are
1. Check the combination of Account modifier of Purchase order account assignmnet or PR. Based on the modifier and check the relevent combination in OBYC
Valuation ClassAccount ModifierIf Groups is there + Transaction Event Key + Gl Accounts
2. If GL Account is available then check the GL Master through FS00 for validation of mandatory consumption is required and i feel there is no issue with material master.
Rewards if it helps
Regards
Goutham

Sales order(VA01) discount not calculated

Similar Messages

Maybe you are looking for