Sales Reprsentative not updating in Profitability Analysis document !

Hi All,
Sale Representative is not updating in accounting in Profitability analysis
Sales Rep is flowing from customer master -> sale order -> Delivery - > Billing but not updating in profitability analysis...its is getting updated everywhere but not in PA.
Can any body guide me on this...its urgent
Thanks & Rgds
Naveen

ok ! so.... reward !
ps: you have to extend the structure PAPARTNER (serch for this term in OSS)

Similar Messages

Profitability Analysis document

Dear All,
At the time reversal of Sales delivery system is not generating Profitability analyses document.
Scenario is like this
At the time of delivery to customer the standard price is 10, but at the time of reversing the delivery the Standard price is 12.the difference 2 system is posting to variance G/L Account.
For variance cost element we activated the PA Segment posting in OKB9.
but for variances system is creating only controlling document, it is not creating Profitability analysis document.
pls help me, issue is urgent.
Advance
Message was edited by: Nalluri Surendra

which CO document does the system creates : CCA document ?
on which cost centre ? PCA document ?
What is the CE category of the CE used for posting the variance ?

Exchange Rate in Profitability Analysis Document

How is the exchange rate populated in profitability analysis document?
We have couple of scenarios:
Scenario 1: Credit memo request created without any reference and credit memo is created successfully. Exchange rate populated in the profitability analysis document is the exchange rate which applicable to current date.
Scenario 2: Credit memo request created with reference to customer invoice document and credit memo is created successfully. Exchange rate populated in the profitability analysis document is the exchange rate which applicable to the past date. We dont know how the system picked the exchange rate which does not applicable to the current date.
Any poiniters to this issue?

HI,
try SAPNET note 429517.
Best regards, Christian

Order value fields by field label in the profitability analysis document

Hello,
I am displaying a profitability analysis document and I want to order the value fields by their technical name (VV001, VV002, VV003...) instead of in alphabetical order (the system orders them by the field label).
Is it possible?
Thank you very much
Bea

Hello,
Check in KE4M whether sd condition type FKLMG is mapped corresponding value field in COPA.As you are getting the value for other company codes, this setting should be there.
You can also try checking simulation of billing document transfer through KE4ST. Check the details analysis
thanks
Hari

Referance material document of 103 is not updating in 105 material document

Dear All,
I have created a Good Receipt through MIGO using 103 movement. Later I have created 105 movement with respect to 103 movement reference through release blocked stock.
After creation of documents, when checked the document created through 105 movement there is no reference number of 103 document number found in the document number of 105 movement.
In the table MSEG field LFBNR is supposed to get updated with the reference number of the document created through 103 movement.
In this case, this reference number is not updated in the table MSEG-LFBNR.
What is the reason for Referance material document of 103 is not updating in 105 material document at item level in Purchase order Tab.
Regards,
Vinay

Hi,
I was faced this issue yesterday and finally find it caused by the check box ' Based-GR IV' in the PO.
Twig Chan

Characteristic and value field in profitability analysis document

hi,
1 in VF03, when i click the accounting button, i got the profitability analysis document.
when i click on it, it shows display line items with tabs like characteristic and value fields.
may i know where i can see the characteristic and value fields defined where each time when i click on profitability analysis document, i get the list of characteristic and value field.
2 also if open FB03, can see the profit segment. the characteristic and value defined in where?
any tcode or spro that can show how the characteristic and value defined in profit segment.
thanks

Hi
Pleaase go through the below mentioned links. It will give you a better insight on the topic you want information about.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/7a/4c38334a0111d1894c0000e829fbbd/content.htm
http://help.sap.com/saphelp_erp60_sp/helpdata/en/7a/4c388e4a0111d1894c0000e829fbbd/content.htm
http://help.sap.com/saphelp_erp60_sp/helpdata/en/7a/4c389b4a0111d1894c0000e829fbbd/content.htm
Hope this helps. Let me know if you have any questions.
Karthik

Condition value is not updating in shipment cost documents.

We are creating a shipment cost document and condition value is not updating automatically when we enter the amount.
Regards,
Jagadeesh

Dears,
The material master of the material is not maintained with gross weight and net weight, hence automatic updation for condition value is not taking place, i resolved the issue.
Thanks,
Jagadeesh

Configuration data on sales order not update with idoc ORDERS05

Hi All,
I'm trying to post Inbound ORDERS05 to create a sales order with configuration data. In particular i'm using the messsage type ORDERS, process code J3AA (identification J_4A_IDOC_INPUT_ORDERS).
On the IDOC tree, segments E1CUREF,E1CUCFG,E1CUINS,E1CUVAL are correctly valorized.
It is creating the order but not updating the configuration data, can someone please let me know if there are other fields/Segments that need to be populated in order to get the config updated in the sales order ?
Thanks
Piergiorgio

Hi ,
I am facing similar issue ( Configuring data in orders idoc )
Please give your inputs if your successfully
Thanks,
Raghu..

From Work Order Functional area not Updating in MM & FI Documents During GI

Hi All
In work order functional area is getting updated in additional data tab from functional location. In functional location we have the work center and this work center is assigned to cost center. In this cost center we maintain the functional area & profit center.
from there it is updating in the work order. But in MM & FI documents the functional area is showing as blank we are facing this issue for only one work order for other work orders the functional area is updating in MM & FI documents.
Thanks & Regards
VIshvesh Saodekar
Edited by: Vishvesh Saodekar on Nov 8, 2010 12:43 PM

I have posted thread in PLM forum

Sales Value not updated in credit check

Hai Guys,
I am facing an important issue in the Credit check. The Sales value (SO / Dly made but not delivered / billed) is not reflecting in the credit check.
1. I created a step in the pricing procedure and assigned its 'subtotal' to A (KOMP-CMPRE) - so that it can be taken for credit update.
2. I had activated the update of LIS S066 - for Sales Order credit
3. In the automatic credit control, I have checked the Open SO & Deliveries
Still my credit check is not checking the open SO & Dly.
Can somebody help me in this regard.
Regards,
Maheshwaran. I

Hi
Check whether you have entered the credit control area to that customer in XD02.
Use the Update group 000012
o   Sales order
      -   Increases open order value from delivery-relevant schedule lines
o   Delivery
      -   Reduces open order value from delivery-relevant schedule lines
      -   Increases open delivery value
o   Billing document
Reduces open delivery value
Increases open billing document value
Financial accounting document
Reduces open billing document value
regards
Edited by: Prashanth on Jun 10, 2009 2:52 PM

Sales employee not update in COPA

Dear All
Can anyone tell me how to make order update for changes made to Sales Orders after the fact.
For Example:
An order was entered but had the wrong Sales Group and Sales Employee. We made the change in the order header but it does not profitability segment of every item. How can I make this update?
Best Regards
Adit

Hello,
One option is in VA05, Edit header tab, mass chnages, you can check the options there,
individual chnages in each line item else you may write a LSMW or a BDc for the chnages based on the documets affected
hope this helps
Thanks
Akasha

Sales value not updating

Hi,
One customer has risk category as medium and in OVA8 like as below
                                                                                No credit check 0
Deviation in % 0
Item check                           X
                                                                                Static               C        Open orders       Open deliveries
Dynamic      X              Horizon                0    T
Document value    B    Max.doc.value     3,000,000.00
Critical fields      A
NextReview date         Number of days    0
Open items     A           Max.open.item %    1   NoDays openI 1
OldestOpenItem >       Days oldestItem   0
now my question is if i make any changes in any open sales order or partial deliverd order or being processed sales orders..
system is not showing impact in variation of sales value or credit exposure value in FD32.
plz advise , how to solve this issue?
Thanks in Advance..
Mk

Hiii
in Transaction OVA8, there is one option there under Released document still unchecked "Number of Days" make it 0.
Hope it will solve your problem.
Regards
Shambhu Sarkar

Check number not updated in the payment Document

Hi,
In transaction code F110, we have created one proposal and do the payment run, System is creating the payment document but the check number not getting updated in the document.
Kindly revert back.
Thanks,
Samir Bhatt

Go to transaction SE38 and run program RFCHKU00. This will update the assignment field of the document with the check numbers.

Sales Order not updated in MD04

Dear Gurus
Sales order is not getting updated in MD 04 for few Materials and those materials are not relevant for MRP.
Kindly help me in this regard
Thnx
MK

This may be due to schedule line category in the sales order ->item level.
In t.code VA03, enter the sales order number. Then highlight line item and click on schedule lines for items button on the bottom. Find the schedule line category derived for the item under schedule line category column.
Then go to t.code VOV6. Select the schedule line that you found in the sales order and click on details button. Under transaction flow, you will find Req/Assembly field, which may NOT be checked in your case. If this field is not checked, then the requirement will not be passed to MRP.
If this is checked and still you dont see the details in MD04, then run report SDRQCR21 in SA38 and check again.
Regards,

Credit Management Check - Sales Value not updated in FD33

Hi,
We have configured Credit Management checks in our system.
When we create a Sales Order that has exceeded the Credit Amount for a Customer we get a pop up saying "Credit Limit Exceeded by XXX amount. We proceed to save the sales order.
By my understanding this amount XXX should get get updated in Transaction FD33 - Customer Credit management Display Status in the column "Sales Value". But this does not happen. The value remains as zero.
What could be wrong here. Should this field not be updated with the credit value that the customer has exceeded?
Thanks and Regards,
Ashwin

The Sales Value in FD33 transaction is the value of open sales orders as of that point. Now in your case if you are creating the first sales order and the value of that order is going beyond the allowed credit limit then and as per setting if system is blocking that order for credit faliure in this case system does not consider this order as open untill it blocked for credit.
Check if the order is blocked for credit. Also see the status of the order in VBUK (status table).
Hope this helps.

Sales Reprsentative not updating in Profitability Analysis document !

Similar Messages

Maybe you are looking for