SAM on x86

Hi!
System Requirements for SAM (SPARC Architectural Model) consist a
SPARC CPU based system with Solaris 9 or Solaris 10 Operating System.
Can be eat an opportunity to start SAM on x86 if no how can i buy an SPARC CPU processor?

May be QEMU ( http://qemu.org/ ) help me?

Similar Messages

Why do I get this error when I try to install Reader XI in Windows 8.1?

"Error 1303. The installer has insufficient privileges to access this directory: C:\Program Files (X86)\Adobe\Reader 11.0\Reader. The installation cannot continue. Log on as an administrator or contact your system administrator."
This is my personal home computer. I have no administrator to contact. I have gone through all the trouble-shooting suggestions provided by Adobe but I still get this message trying to download Reader XI or X. I previously had Reader on this computer but it started failing so I uninstalled it and now I'm trying to re-install it. My antivirus system is Webroot SecureAnywhere and it says there are no problems with my computer. I'm using a 6 month old Dell computer and System Mechanic also says there are no problems with my computer.
Any suggestions will be appreciated.

I have the exact same problems as reported by Vector at the start of this thread. Running Windows 8, Reader stopped responding, so I uninstalled and tried to reinstall XI, I get Error 1303, with the issue being permissions on that same directory (x86\Adobe\Reader 11.0\Reader). If I open Explorer and try to navigate to that folder, I see it there under the Reader 11.0 folder, but if I double-click I cannot even open it, I get an "is not accessible. Access is denied" error. I checked the Security settings on the Reader 11.0 folder, SYSTEM, Administrators, Users, and TrustedInstaller all have Full Control. When I go into Advanced and check the box for "Replace all child permission entries with inheritable permission entries from this object" and click Apply, I get an error for the \Reader folder (Failed to enumerate objects in the container. Access is denied"). I tried deleting the Adobe folder on down, hoping I could just start fresh with the re-install, but it does not allow me to. Completely stuck. Any ideas?

Acrobat 9 Portfolio can't be printed by Reader 9

I have addressed this issue with Adobe Support and have either received references to KB documents that are totally unrelated, or have been told to just uninstall Reader 9 and install Reader 8, since Reader 8 works ok. In my opinion that answer is unacceptable, and I wanted to find out whether any one here can help me further.
Our company has a number of PDF Portfolio documents created in Acrobat Pro 9. When they are opened by Acrobat Reader 9, in certain situations there is a problem printing the document. When there is a problem, the user will see the Adobe warning "For the best experience, open this PDF Portfolio in Acrobat 9 or Acrobat Reader 9, or later." in the preview window prior to printing. (Remember, we are opening it with Reader 9.) If the job is sent to the printer, that warning message is all that prints. This problem is universal in our company (to my knowledge) regardless of the computer used or the username used to login. I have addressed the specific scenarios below.
I have attached a PDF Portfolio which has this problem, as well as a PDF of what prints (or previews) when one of the following scenarios occurs:
- Portfolio PDF opened in browser, XP x86 and x64 (Reader 9 installed), attempting print from File menu
- Portfolio PDF opened in browser, XP x64 only (Reader 9), attempting print from toolbar print button
- Portfolio PDF saved to local disk and opened in Acrobat Reader 9.1.3 directly, XP x64 only, attempting print from toolbar or File menu
Any other scenario (non portfolio, portfolio opened directly in Acrobat on x86 systems, print from right-click context menu, print from "Print Form" button added to PDF document, etc) yields a successful print. Also, opening document on system with Acrobat Reader 8 the user will see the warning when first opening the portfolio, but the individual documents are accessible, readable, and printable with no problems.

I didn't realize XP x64 was unsupported. Thanks for that info. The problem in XP x64 is the same as x86 until update 9.1.3, so for now I might just back them back down to 9.0.0 and turn off automatic updates.
On the x86 machines, some of them may have been upgraded from 8 to 9, but I have tested for this problem on a machine that has only had Acrobat Reader 9.0.0 installed since Windows XP was installed, and the problem still exists.

Office 2010 standard and MS Project office365 pro install

Dear all
I have a laptop with Win7 ent 64bit
and office 2010 standard edition.
I bought the online subscription of Project Pro for Office 365
i am able to download the installer
start the installer but the installation is not possible, i got the message that I have the beta version etc whcih is not true.
I found few fix advices like
1. making the fix option for the office 2010 package.
2. applied special FIX it patch
and still the same
can you please advice ?
bests
PP

What version of Office 2010 do you have installed? 32 or 64 bit? You must install the same version (x86 or 64bit) as the version of Office - even though you have the 64 bit version of Windows 7.

Syslogd Consuming more CPU utilization in Solaris 10

Hi All,
The Syslogd process consuming more CPU utilization in Solaris 10. Kindly help how to reduce this cpu utilization.
Regards
Siva

Hi Robert,
Both are same architecture. x86
The following is the prstat o/p from the affected server. Pls note that one of the mount point in this server is in ZFS.
prstat -l
PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/LWPID
26092 root 3933M 3930M cpu1 60 0 29:00:43 22% syslogd/56
26092 root 3933M 3930M run 30 0 289:47:33 12% syslogd/18
26092 root 3933M 3930M run 40 0 272:31:05 11% syslogd/22
26092 root 3933M 3930M run 22 0 14:47:16 9.7% syslogd/65
26092 root 3933M 3930M run 42 0 14:43:46 9.7% syslogd/63
26092 root 3933M 3930M run 31 0 14:40:42 9.6% syslogd/66
26092 root 3933M 3930M sleep 40 0 152:45:42 5.9% syslogd/21
26092 root 3933M 3930M cpu0 53 0 6:41:58 4.1% syslogd/58
26092 root 3933M 3930M run 52 0 6:23:13 4.0% syslogd/57
26092 root 3933M 3930M sleep 43 0 6:29:21 3.9% syslogd/59
26092 root 3933M 3930M sleep 52 0 5:55:14 3.6% syslogd/71
More over we are continuously receiving the below error message in the /var/adm/messages, we don't know, from where the error arises from the syslog server.
syslogd: malloc failed: dropping message from remote: Not enough space
PRIVILEGE :[4] 'NONE'
Edited by: Siva_Systems on Mar 29, 2010 5:06 AM
Edited by: Siva_Systems on Mar 29, 2010 8:18 AM

Lightroom 2.1 will not display images.

I use previous versions of Lightroom 1.3, 1.4, 2 Beta and they work fine. Now I upgraded to Lightroom 2.1 and Masters Collection CS4 and Lightroom 2.1 will not display images. All the images I import are just a shade of gray.
When I adjust the parameters of the image the histogram is changing but the image is blank.
I have a Vista machine.
Thank you

I have a Vista Home Premium, I am on Vista X86 and I just installed LR 1.4 and is working. Also LR2 Beta was working.
So on the same Vista X86 machine LR 1.4 is working LR 2.1 is not displaying the images.
This is the sysinfo:
Lightroom version: 2.1 [512205]
Operating system: Windows Vista Home Edition Service Pack 1 (Build 6001)
Version: 6.0 [6001]
Application architecture: x86
System architecture: x86
Physical processor count: 4
Processor speed: 2.4 GHz
Built-in memory: 3069.7 MB
Real memory available to Lightroom: 716.8 MB
Real memory used by Lightroom: 99.9 MB (13.9%)
Virtual memory used by Lightroom: 75.2 MB
Memory cache size: 65.9 MB
Serial Number: 116040017170941123477699
Application folder: C:\Program Files\Adobe\Adobe Photoshop Lightroom 2
Library Path: C:\Users\Alex\Pictures\Lightroom\Lightroom 2 Catalog.lrcat

WDS Install Image missing HAL details

I have a Win2008 R2 WDS server that has been up and running for quite some time. I have a Windows 7 x86 image that is hosted on that server.
I recently updated the Win7 image, syspreped, and uploaded to my WDS server as a new (v2) image. In the past this has always been quite simple, but for some reason i cannot get the new v2 image to display at the WDS client image selection screen.
The WDS server allowed me to add the new v2 image to my install image group, and says its online and working properly.
The WDS Client will only display the old v1 image and not the newly updated v2 image.
Both images were created on the SAME computer, x86, acpi multiprocessor. I am using the SAME computer to test/deploy the image.
The source of the problem seems to be from the install image missing the HAL details
If i use the WDS console and drill down to my old and new install images, right click and look at the properties this is what i get:
v1 Image: HAL Type ACPIAPIC
v2 Image: HAL Type (ITS F"N BLANK!!!!)
I get the same results looking at the <HAL> </HAL> parmeters using ImageX /info blah.wim
SO, Why the HELL does WDS/Sysprep not recognize my HAL type of my new v2 image???? I have tried 3 different computers to generate/capture the install image and ALL are missing the HAL type.
Anyone have a clue why the WDS/SYSPREP process does not identify the HAL type and leaves me with a blank string - and hence a useless image?
I have previously tried this KB with no change:
"An ACPI APIC UP HAL operating system image cannot be deployed if a Windows 7 boot image or a Windows Server 2008 R2 boot image is used in the deployment process
http://support.microsoft.com/kb/980711"
me

I cant post that online. Its from a secure network. So this is hand typed...
v1 Image that works:
<WIM>
<TOTALBYTES>3465086</TOTALBYTES>
<IMAGE INDEX=1>
<NAME> WINDOWS 7 V1 </NAME>
<DESCRIPTION> THIS IS MY DESCRIPTION </DESCRIPTION>
<WINDOWS>
<ARCH>0</ARCH>
<PRODUCTNAME> Microsoft Windows Operating System </PRODUCTNAME>
<EDITIONID>PROFESSIONAL</EDITIONID>
<INSTALLATIONTYPE>Client</INSTALLATIONTYPE>
<HAL>acpiapic</HAL>
<PRODUCTTYPE>WinNT</PRODUCTTYPE>
<PRODUCTSUITE>Terminal server</PRODUCTSUITE>
<LANGUAGES>
<LANGUAGE>en-US</LANGUAGE>
<DEFAULT>en-US</DEFAULT>
</LANGUAGES>
<VERSION>
<MAJOR>6</MAJOR>
<MINOR>1</MINOR>
<BUILD>7601</BUILD>
<SPBUILD>18229</SPBUILD>
<SPLEVEL>0</SPLEVEL>
</VERSION>
<SYSTEMROOT>WINDOWS</SYSTEMROOT>
</WINDOWS>
v2 Image that does NOT work:
<WIM>
<TOTALBYTES>3510306</TOTALBYTES>
<IMAGE INDEX=1>
<NAME> WINDOWS 7 V2 </NAME>
<DESCRIPTION> THIS IS MY DESCRIPTION </DESCRIPTION>
<WINDOWS>
<ARCH>0</ARCH>
<PRODUCTNAME> Microsoft Windows Operating System </PRODUCTNAME>
<EDITIONID>PROFESSIONAL</EDITIONID>
<INSTALLATIONTYPE>Client</INSTALLATIONTYPE>
<VERSION>
<MAJOR>6</MAJOR>
<MINOR>1</MINOR>
<BUILD>7601</BUILD>
<SPBUILD>18229</SPBUILD>
<SPLEVEL>0</SPLEVEL>
</VERSION>
<SYSTEMROOT>WINDOWS</SYSTEMROOT>
</WINDOWS>
Notice that the v2 image is missing the following from the xml:
<HAL>acpiapic</HAL>
<PRODUCTTYPE>WinNT</PRODUCTTYPE>
<PRODUCTSUITE>Terminal server</PRODUCTSUITE>
<LANGUAGES>
<LANGUAGE>en-US</LANGUAGE>
<DEFAULT>en-US</DEFAULT>
</LANGUAGES>
Im lost as what to try next. Anyone have any ideas why my new v2 image is missing information from the .wim file?
me

Config Manager 2012 client upgrade (via package with batch commands)

Hello all,
I would like to kindly ask for your help with my question regarding a SCCM 2012 R2 client upgrade (from RTM to R2)
Recently, we have upgraded from RTM version of SCCM2012 to R2 (with the PXE hotfix applied)
During the process, I have choose not to upgrade clients when the SP1 was applied and go straight for the R2, which is not a problem I believe.
My question is regarding the pre-created packages, that are showing up in the console. I believe, that they are the easiest way to upgrade clients via packages in SCCM. (we can't push the installation due network policy)
This hotfix is stored here: \\"FQDN_site_server"\SMS_TSP\hotfix\KB2905002\Client\x64 (in case of x64 version, x86 is the same but x86 in the end)
The executed file from this path is this with this command following:
msiexec.exe /p configmgr2012ac-r2-kb2905002-x64.msp /L*v %TEMP%\configmgr2012ac-r2-kb2905002-x64.msp.LOG /q REINSTALL=ALL REINSTALLMODE=mous
Anyway, when we install the clients when we deploy it for the first on a machine, that has no client or we reinstall it, we do it with help of this batch command:
set curdir=%~dp0
%curdir%ccmsetup.exe SMSSITECODE=TSP /NoCRLCheck /UsePKIcert /forceinstall SMSMP=HTTPS://CML.LTSPRAGUE.CZ CCMHOSTNAME=CML.LTSPRAGUE.CZ
I just need to know, if I can use the prepared package from the console in our case and if it will keep the settings when the package is deployed.
I belive I have found a similar questin here on the forums:
http://social.technet.microsoft.com/Forums/en-US/c9b40687-1843-44c7-b61b-fd26d53ab90b/cumulative-update-3-and-agent-upgrade?forum=configmanagerdeployment
The second answer might the answer I'm looking for, but can you explain that to me like I'm five years old? :)
Please, let me know.
The IT guys from LukOIL

I'm not sure, because of my short time at the company, but there are historical security reasons for setting the push installation off.
Second reason are strict firewall rules used here. SCCM Agent may contact site server through HTTPS - that is a one way communication, so push installation isn't possible.
Don't mix "client push" and "automatic client update". See
http://blogs.technet.com/b/configmgr_geek_speak/archive/2013/09/09/using-configuration-manager-automatic-client-upgrade-to-upgrade-to-the-latest-system-center-endpoint-protection-client.aspx for further details. (And yes, the article talks about SCEP, but
it also tells details about the entire process)
Torsten Meringer | http://www.mssccmfaq.de
Thank you for the article and your, but I find it easier to deploy packages right now.
I have found out, that there is a folder named "ClientUpgrade" in ConfigMgr installation folder.
I used this and made a package out of it. Deployment went fine as well as the installation of the upgrade for the client, but there is a problem now, that I don't see any software in the "Software Center" in "Available Software" - and there should be, since
I have may SW pointed to me and the list was populated before I have done the upgrade to the new version.
This may be a simple problem, but I really don't know what's wrong.
The IT guys from LukOIL

MDT TS not joining domain

Hi,
I'm experiencing something weird. my MDT 2010 U1 TS doesn't join HP Compaq 6200 & ProBook 6460b to the domain when I deploy Win 7 x64. It works for x86.
I'm using drivers packages and my WinPE have all drivers (same version x86 and x64). I didn't enter my domain informations in the CS.ini, I only use the "Apply Network Settings step for the domain. It's configured correctly with the SCCM account to use to join
the domain. My computers account are created manually in a OU before do the OSD (not a container). I did F8 during the TS and the computer have an IP and I'm able to ping it all the time during
Here is the log in advertisement status in SCCM:
Severity   Type   Site code   Date / Time   System   Component   Message ID   Description
Information   Milestone   CTX   07/06/2012 9:30:05 AM   COMPVALERIE   Task Sequence Engine   11134   The task sequence execution engine successfully
completed the action (Apply Network Settings) in the group (PostInstall) with exit code 0 Action output: ==============================[ OSDNetSettings.exe ]=========================== Command line: "osdnetsettings.exe" configure Setting %SystemRoot%
to "D:\Windows" Loading existing answer file "D:\Windows\panther\unattend\unattend.xml" Configuring global network settings Join type: 0 Joining domain: sa.domain.com Getting namespace "Microsoft-Windows-UnattendedJoin" for architecture "amd64" DNS domain:
DNS domain search order: IP filter sec enabled: false No adapters found in environment. Performing global configuration only. Writing configuration information to D:\Windows\panther\unattend\unattend.xml Successfully saved configuration information
to D:\Windows\panther\unattend\unattend.xml Configuring "OSDNetSettings.exe finalize" to run on first boot OSDNetSettings finished: 0x00000000.
For some others computers able to join the domain, I have the same results in the advertisment status log file.
Here is some log from the BDD.log:
Loaded D:\Windows\panther\unattend\unattend.xml   zticonfigure   07/06/2012 9:30:06 AM   0 (0x0000)
Merge specified, but D:\_SMSTaskSequence\WDPackage\Control\\Unattend.xml wasn't found, unable to merge   zticonfigure   07/06/2012 9:30:06 AM   0 (0x0000)
Property UPGRADE is now = false   zticonfigure   07/06/2012 9:30:06 AM   0 (0x0000)
Property ComputerName is now = COMPVALERIE   zticonfigure   07/06/2012 9:30:06 AM   0 (0x0000)
No value found for FullName   zticonfigure   07/06/2012 9:30:06 AM   0 (0x0000)
No value found for OrgName   zticonfigure   07/06/2012 9:30:06 AM   0 (0x0000)
No value found for ProductKey   zticonfigure   07/06/2012 9:30:06 AM   0 (0x0000)
No value found for JoinDomain   zticonfigure   07/06/2012 9:30:06 AM   0 (0x0000)
No value found for MachineObjectOU   zticonfigure   07/06/2012 9:30:06 AM   0 (0x0000)
No value found for JoinWorkgroup   zticonfigure   07/06/2012 9:30:06 AM   0 (0x0000)
No value found for DomainAdmin   zticonfigure   07/06/2012 9:30:06 AM   0 (0x0000)
Here is the netsetup.log file:
ï»¿06/01/2012 09:53:29:714 -----------------------------------------------------------------
06/01/2012 09:53:29:714 NetpDoDomainJoin
06/01/2012 09:53:29:714 NetpMachineValidToJoin: 'COMPVALERIE'
06/01/2012 09:53:29:714    OS Version: 6.1
06/01/2012 09:53:29:714    Build number: 7601 (7601.win7sp1_gdr.110622-1506)
06/01/2012 09:53:29:714    ServicePack: Service Pack 1
06/01/2012 09:53:29:807    SKU: Windows 7 Enterprise
06/01/2012 09:53:29:807 NetpGetLsaPrimaryDomain: status: 0x0
06/01/2012 09:53:29:807 NetpMachineValidToJoin: status: 0x0
06/01/2012 09:53:29:807 NetpJoinWorkgroup: joining computer 'COMPVALERIE' to workgroup 'WORKGROUP'
06/01/2012 09:53:29:807 NetpValidateName: checking to see if 'WORKGROUP' is valid as type 2 name
06/01/2012 09:53:29:838 NetpCheckNetBiosNameNotInUse for 'WORKGROUP' [ Workgroup as MACHINE] returned 0x0
06/01/2012 09:53:29:838 NetpValidateName: name 'WORKGROUP' is valid for type 2
06/01/2012 09:53:29:979 NetpSetLsaPrimaryDomain: for 'WORKGROUP' status: 0x0
06/01/2012 09:53:30:057 NetpJoinWorkgroup: status: 0x0
06/01/2012 09:53:30:057 NetpDoDomainJoin: status: 0x0
Now the thing weird is the smsts.log file:
Found network adapter "Bluetooth Device (Personal Area Network)" with IP Address 0.0.0.0.   TSMBootstrap   07/06/2012 9:45:23 AM   2292 (0x08F4)
Found network adapter "Intel(R) Centrino(R) Advanced-N 6205" with IP Address 0.0.0.0.   TSMBootstrap   07/06/2012 9:45:23 AM   2292 (0x08F4)
Found network adapter "Intel(R) 82579LM Gigabit Network Connection" with IP Address 0.0.0.0.   TSMBootstrap   07/06/2012 9:45:23 AM   2292 (0x08F4)
During the TS a I did F8 and it get a IP address and I'm able to ping the servers but why in the log I don't see an IP ? What do I need to fix this ?
And Why the netsetup.log file see WORKGROUP instead of the domain ?

Hi,
Have been struggling with this is issue for months! Have only just this minute got it to work. Thought I would share how I got it to work, just in case other people may find it helpful.
We here use SCCM 2012 R2, and deploy images using SCCM Task Sequences. For months now we have not been able to get our HP Probook 6560b's to finish installing and join to the domain. The task sequence would finish and show a Windows 7 login screen for a
local account.
Having tried a matter of many different ways it has worked using the driver, as mentioned above by Olivierdsm2 and MattGrimley.
First I downloaded the HP Driver pack for the Probook 6560b. I made them all into folders corresponding to Driver Category, Audio, Chipset, Network. Making sure any EXE's are unzipped to show raw INF form if applicable. I then made sure the Network driver
was removed and replaced with the one mentioned by Olivierdsm2 and MattGrimley. The Intel(R) 82579LM Gigabit Network Connection v11.15.16.0.
I created a new Virtual Machine on our Hyper-V server, with a clean Windows 7 image. I installed all software required for the image such as Office 2010, and then completed Windows updates. I then used Sysprep to generalize the image and make it OOBE. I
added the WinPE iso to the CD Tray in Hyper-V and as the VM shut down it booted into WinPE. I then used DiskPart to list the volumes, just so I could see which Drive letter corresponds to each partition, as I will need these details for next command lines.
I then exited Diskpart and entered into Image X to capture the WIM. I captured the WIM to local drive and then copied over to my computer where I used DISM to mount the WIM and then to apply the HP drivers from the folder location mentioned above. Making
sure to use the Recurse switch so it adds drivers from within the folders. It imported successfully and then commited the changes so the WIM was unmounted.
I then copied the WIM to my SCCM server and imported it to the Operating System Images section. making sure I distributed the content. I added the WIM to my Task Sequence and named it so it was specific to the Probook 6560b. I changed the task sequence by
deleting auto install or apply drivers, as these are now in the image itself. So I will only install this task sequence to Probook 6560b's.
Having done all the steps I then made the task sequence available to PXE and Media and ran the installation on the Probook laptop, and it actually FAILED!!
The network driver didn't actually install from DISM. Logged into Laptop and on Device Manager the network driver wasn't installed. I then installed the Network Driver "The Intel(R) 82579LM Gigabit Network Connection v11.15.16.0 " manually from the laptop
and it then installed ok. I followed the same steps above to Sysprep, and capture image with ImageX. Then once I added the image to SCCM and to the task sequence, I ran the installing again to the laptop and IT WORKED!!! The laptop came on, and it was joined
to the domain!
I did this from Hyper-V as I read that this will create an image that doesn't have too many drivers from the reference image device. I don't know if this still would work capturing straight from the laptop itself, but when I did try this before I logged
in locally to check the driver version and it was always an up to date driver, which must be why it never worked before. I think our drivers and driver packages from SCCM must have the newer drivers as to why this didn't work from there. But I'm just happy
this now works and we can save time not having to do things manually.
Hopefully this may help anyone with similar issue who is in difficulty with this. Would never have got it to work if I hadn't come across this forum entry. Even if it is for MDT. Could not find any other site that helped with this issue.
thanks,
Don

Duplicate vs Standby -- What To Do Without Data Guard

WHAT WE HAVE
Three 10.2.0.3.0 databases in production on the same Linux x86 server (Red Hat OS). An identical Linux x86 server (with same OS) is available for housing a corresponding backup instance (either duplicate or physical standby).
THE ASSIGNMENT
Develop a plan that, in the event of a loss of our prod server, provides the shortest time before substitute databases are up and running on the backup server. WE CANNOT USE DATA GUARD (due to server licensing issues). It isn't necessarily a high priority to apply archive logs to duplicates or standbys on a regular basis, but I realize the more up-to-date a backup database is, the less recovery time would be needed if and when it's pressed into service. (BTW: We take weekly incremental level 0 and daily incremental level 1 backups of our prod databases with RMAN and keep them for 28 days.)
QUESTIONS
1. Does our 'no Data Guard' rule eliminate using standbys - even if I could use OS processes to transfer archive logs between servers and manually apply redo? (I'm not quite sure what exactly constitutes Data Guard.)
2. If I'm allowed to create standbys, I'll create them using RMAN. Since the scenario being planned for is a loss of the production server, I figure I'm worried about failover and not switchover. Thus, once standbys are created, in addition to manually transferring and applying archives and creating redo files for them, what other action(s) would I need to take before they could be activated, if that's ever needed? Would the redo files I would have to create be of type STANDBY or ONLINE?
3. Can a standby be opened in read/write mode without being activated?
4. If I can only use duplicates and if the production server were to go down one day, could the most recent valid RMAN backup(s) for the prod databases be used in recovering the duplicates?
I'd prefer the backup instances have the SAME SID (db_name) as the corresponding one in prod, if possible.
Thanks.

Hi
1. Does our 'no Data Guard' rule eliminate using standbys - even if I could use OS processes to transfer archive logs between servers and manually apply redo? (I'm not quite sure what exactly constitutes Data Guard.)
Ans:- yes if you are able to transfer archivelog to standby destination ,you also have to register archivelogs in controlfile manually,then only you can recover standby with archivelogs.
2. If I'm allowed to create standbys, I'll create them using RMAN. Since the scenario being planned for is a loss of the production server, I figure I'm worried about failover and not switchover. Thus, once standbys are created, in addition to manually transferring and applying archives and creating redo files for them, what other action(s) would I need to take before they could be activated, if that's ever needed? Would the redo files I would have to create be of type STANDBY or ONLINE?
Ans:- Yes you can use RMAN to create standby database.you need to activate standby only with the case of failover.Standby logfile is needed if you use Real Time redo apply .In your case you are not enabling Data Guard to transport logs ,so it is not possible to Real Time apply.
3. Can a standby be opened in read/write mode without being activated ?
Ans:- Yes,If you do switchover/failover to open for read/write.Without switchover/failover you can open only in read only mode.
4. If I can only use duplicates and if the production server were to go down one day, could the most recent valid RMAN backup(s) for the prod databases be used in recovering the duplicates?
Ans:- IF you make duplicate database then it will not accept any log from primary database.
Hope this will help you.
Regards
Tinku

Itunes was working fine. Tries to install latest upgrade and get error message about an invalid character in the path "Program Files (x86)". PC, Win7, nothing else appears to be having same issue.

Itunes was working fine. Tried to install latest upgrade and get error message about an invalid character in the path "Program Files (x86)". PC, Win7, nothing else appears to be having same issue. Program still works, simply cannor upgrade.

Thanks b noir,
I tried this solution without success. After FixIt ran and didn't find a problem, either in looking for issues with "software upgrade" or "iTunes" it kindly offered to help me uninstall iTunes. I had thought of this as a possibilty but it seems to me that if you do that you lose a lot of "non-native-to-Apple" information you might have entered. I did this once and recovery was painfull. Is there a way to uninstall iTunes without losing all of that sort of thing? Any help would be appreciated.

The last itunes update has failed - getting error program C:/program files (x86)\itunes\itunes.exe - R6034 attemp tp load C runtime library incorrectlly. I have tried to repair and reinstall. getting same error - can ayone help

the last itunes update failed - getting error R6034 attemp to load C runtime library incorrectly. Program reference - Program C;/prgram files (x86)\tunes\itunes.exe - can anyone help. I tried to use epir and did an uninstall and reinstall and still geting same error

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

SQL job running DTEXEC.EXE via PowerShell step produces wrong characters in result tables. Running the same DTEXEC.EXE in PowerShell x86 window produces correct results.

I've created a package in SSDT (Visual Studio 2012) to import DBF tables into MSSQL 2014 via a wizard.
Source DBF files contain tables with Russian (Cyrillic) characters in records fields.
Created package works fine, produces correct results (imports Cyrillic characters as needed) while:
•debugging in VS2012
•deploying package in SSISDB and running the package via PowerShell x86:
&"c:\Program Files (x86)\Microsoft SQL Server\120\DTS\Binn\DTExec.exe" /Server "server\mssql2014" /ISServer "\SSISDB\import\Integration Services Project16\Package1.dtsx";
But when I create a SQL Agent job with a single PowerShell step that contains the same command and run the job it produces wrong characters in resulting tables. So, the problem is in wrong code page (or encoding). The correct tables with records are
produced and job runs without errors.
I tried
chcp 1251; # 855, 866 -- all of them
&"c:\Program Files (x86)\Microsoft SQL Server\120\DTS\Binn\DTExec.exe" /Server "server\mssql2014" /ISServer "\SSISDB\import\Integration Services Project16\Package1.dtsx";
in SQL Agent PowerShell step, but with no positive result.
Anyone encountered such a behavior? How to fix it?
v

What if you run this package without PowerShell?
Arthur My Blog

Errors x86 and x64 reinstalling MS Office 2010. Same problem with Trial MS Office 2013

Hi. I lost MS Office 2010 3 weeks ago, after I tried to rename my Owner username in the registry, following steps I found online. I have not been able to restore MS Office at all. I received Office I have attempted to uninstall
and reinstall several times, and then attempted to download MS Office 2013 trial version. Nothing works. MS Office does not show as an installed program in my Control Panel. There are Microsoft Files on my computer. Please advise.
I have Windows 7 Home Premium 64-bit Operating System, Service Pack 1.
First Pop up is Single Image permission to run. Then...
Second pop-up is MS Office 2010 Extracting Files, please wait...
Third pop-up is Setup Errors. Setup is unable to proceed due to the following errors: To install and use this product, you must be running one of the following operating systems:
x86 platform Windows 7, Windows Vista SP1, Windows XP SP3, Windows Server 2003
x64 platform Windows 7, Windows Vista SP1, Windows Server 2008
Correct the errors listed above and re-run setup

Hello,
This issue occurs when one of the following conditions is true:
The operating system on which you are trying to install Office 2010 does not meet the system requirements for the product.
The Office 2010 Setup program (Setup.exe) is configured to run in compatibility mode.
Please check your environment to see if it meets the system requirements for Office 2010 or the Setup.exe is happen configured to run in compatibility mode.
Detailed steps, please refer to this page:
http://support.microsoft.com/kb/2267642/en-us
Thanks,
Ethan Hua CHN
TechNet Community Support

I have firefox installed in the program files (x86) directory and nightly installed in the program files directory. When I double click on the nightly icon, firefox starts up. I have gone directly to the program folder with the same results.

I am running win 7 ultimate 64 w/8g mem
This happens in the reverse also. Can't open firefox if nightly is open. nightly is 11.0a1 (2011-11-17)
firefox is 8.0

Hi Scott,
Help #1: I don't understan the concept of Step 1, Step2 and Step 3 to do XML Schema, XSD.exe, and XML Schema Collection in the SQL Server 2012!!?? I just have the SQL Server 2012 Management Studio (SSMS2012) in my PC.
Step1 and Step2 not that related to SQL Server, you can get the XSD from a given XML with an online XSD generator.
Google search: XSD generator
Help #2: How can I execute the xsd.exe in my C:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A\Bin\ folder?
Please see the link in the #1
Help #3: I just learned the basic things of creating XML SCHEMA COLLECTIONS in my SSMS2012 directly. Is the MSss2012P348.sql (I created and presented above) right for the task? How can I use clipboard to create the XML Schema Collection in
my ScottChangDB database?
See the syntax and example in
create XML schema collection
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support

SAM on x86

Similar Messages

Maybe you are looking for