Same part number one with valuation and another without valuation

Hi
I would like to know the below on inventory:
We buy sapare parts for the project1 , but some still left in the store, lets say 30pcs.
we would like to use these 30 spare parts with zero value,becuase we already paid for this spare parts.
Now we buy the same part number (spare parts) for the project 2 with price $5 .
how do we differentiate these old and new spares when choosing in daily transactions.
Please explain we to handle this.
and also we are trying to assign global code for all materials, in this case how do we assign same number for the spareparts with value and without value.
Please let me know if you still need clarifications to give the correct idea and answer. Thanks in advance.
Thanks
Udaya

Hi,
Is it possible to put quantity with Zero price ?, please advise
For example : if matain our stock in two batches with the follwoing prices is it possible ?
Value Batch1:     40 x 4.00 = 160.00
Value Batch2:     60 x 0.00 = 0.00
Total value:     = 160.00
Average price:     160.00 / 100 = 1.60
If we use Batch 1 material the price will be 4.00/pc
If we use Batch2 material the price will be 0.0/pc
is this correct. apprciate if you confirm this scenario. thanks.
Thanks
Udaya

Similar Messages

Setting 2 counters - one with FiniteSamps and another with ContSamps

I am trying to use 2 counters on the USB-6229 (or USB-6259), where one counter has FiniteSamps and another has ContSamps. I have the following code:
ErrChk DAQmxCreateCOPulseChanTicks(hCnt0, "Dev1/ctr0", "", "20MHzTimebase", DAQmx_Val_Low, 0, 400, 400);
ErrChk DAQmxCfgImplicitTiming(hCnt0, DAQmx_Val_FiniteSamps, 100);
ErrChk DAQmxCreateCOPulseChanTicks(hCnt1, "Dev1/ctr1", "", "20MHzTimebase", DAQmx_Val_Low, 0, 400, 400);
ErrChk DAQmxCfgImplicitTiming(hCnt1, DAQmx_Val_ContSamps, 2);
When I run it, I get a run-error 50103 "The specified resource is reserved". If I change the FiniteSamps to ContSamps on the first counter, everything works fine.
If I use only one counter with FiniteSamps, everything also works fine.
Is this a bug in DAQmx or the dual counter use on M-series devices is limited to ContSamps?
Vic
Solved!
Go to Solution.

Hi Vicpik,
What you are seeing is not a bug, the issue here is that finite pulse train generation actually requires two counters for a single task. The details are outlined quite well in the following KB:
How Many Counters Does Each Type of Counter Input or Output Task Take?
If you need to do both task you may need an additional DAQ card, or you could try our new X series cards, that have 4 available counters.
Let us know if you need any further assistance.
Thanks
Scott M.
Applications Engineer
National Instruments

I have two problems. One with LTE and another with iCloud terms and conditions.

I haven't had some of the bigger problems with the 6 as some. But I am having two issues that are getting annoying. One is a pop up every 5-10 minutes that says I cannot use icloud without accepting terms and conditions. However it won't let me accept any. The other is lte is not working on my phone, but is fine with my husbands. Any ideas? Thanks!

klawson88 wrote:
I have 3 classes fully defined: GameWindow(extends JFrame...parameter: FileLoader f) NumberOfPlayersDialog (extends JDialog and implements ActionListener...parameter: GameWindow g), PlayerRollDialog(extends JDialog and implements ActionListener...parameters: GameWindow g and NumberOfPlayersDialog n).Word of advice: avoid having your GUI classes implement Listener interfaces as this makes for the creation of [low cohesion classes,|http://en.wikipedia.org/wiki/Cohesion_%28computer_science%29] and this is a "Bad Thing".
PlayerRollDialog has one button that has an action listener. The user rolls dice for several player objects by pressing the button and the result (which player object has the highest roll) is displayed on the screen. At that point, the button text changes to "Start Game!". What I WANT to do is have a subsequent click on the button close the dialog (to reveal the gameWin underneath). Is it possible to do this? Wouldn't this require two actionPerformed for one event? No, you could do this with a single ActionListener. You will change the button's text and possibly its actionCommand String. Simply query the button for its text and perform the appropriate action based on this.
How can I implement a second actionPerformed for the same event?Again, you don't need to do this.
My second problem is that I want to be able to close the entire program if the user exits out of either dialog without performing an action (clicking on the X button). I try specifying EXIT_ON_CLOSE as their default close operations, but it can't compile. It gives me:Yeah, you can't do that. You can give the classes that hold the dialog a state, say exitOK, and initialize it to false. If the proper buttons were pressed you would change exitOK to true. Then after the dialogs have closed you could then use a public getter, isExitOK(), to check this state and then have your GUI behave accordingly. These dialogs are model, correct?

I recently bought Lightroom and installed on one of my computes. I wanted to instal the program on another computer I have, using the same serial number I already bought and I'm not alowed as it says that the SN is not valid. What shall I do?

I recently bought Lightroom and installed on one of my computes. I wanted to instal the program on another computer I have, using the same serial number I already bought and I'm not alowed as it says that the SN is not valid. What shall I do?

It is possible that you downloaded the Creative Cloud trial of Lightroom. The perpetual license key will not work. Uninstall the version on the second computer, this will not interfere with your catalog, preferences and personal files.
Download the appropriate version from the link below and install, your license key will be accepted and everything will be fine.
Product updates

I had an iphone 4s and it worked nice with facetime and imessage using my phone number but it was stolen on December so I buy a new iphone 4s using the same cellphone number but now imessage and facetime does not work with my number, it only works with

I had an iphone 4s and it worked nice with facetime and imessage using my phone number but it was stolen on December so I buy a new iphone 4s using the same cellphone number but now imessage and facetime does not work with my number, it only works with my apple ID. Please Help me I speak Spanish so if my English is not ok I´m sorry about it.
Do you think that apple has to reset in their database of the old serial number attached with my phone number and that’s why I can´t activate imessage and facetime with my number in the new iphone 4s??

I understand all of this Meg; that is why I bought an Iphone; but never expected my phone not even give a at least a 24 or even 12 hours....I work 12 hour shifts and also would expect to have to charge each night but not twice a day or more. I am not always somewhere I can charge my phone.
Your points are true; however it doesn't help me......

I have a Windows 7 laptop using I tunes 64 and all my music files are on an external disc. I rarely use I tunes and at one point moved all my files (including the music files) from one external disc to another without considering what affect this wou

I have a Windows 7 laptop using I tunes 64 and all my music files are
on an external disc. I rarely use I tunes and at one point moved all my files
(including the music files) from one external disc to another without
considering what affect this would have on the I tunes library. When I eventually
attempted to use I tunes, every selected a song from the library resulted in a
message stating that the file couldn't be located. After following some of the procedures
explained in this community I was able to reconnect the library back to where
the associated music files are presently stored. However, there are still 2
problems that need to be corrected. 1) Every song file now has a duplicate. One
file works and the other file will result in the same message stating that the
file couldn't be located. Before there were 4,000 songs in the library, now
there are 8,000 songs. I need to eliminate the 4,000 dead song files. 2) All
the playlists are still associated with the dead song files which makes the
playlists unusable. Can the playlists be reconnected to the usable files
without manually having to recreate them? Thanks in advance for the help.
sdkr

So am I understanding correctly?
You used your iPod as a hard drive (drag and drop) instead of having iTunes install the music?
If you used drag and drop your choices are different than if you used iTunes to transfer.
Good luck!

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either.

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either. I have an iphone 4 that will not connect to 5ghz.
thank you!

Your AirPort Express is already providing two separate 2.4 GHz and 5 GHz bands, but each band is using the same wireless network name.
This is the default setup for the AirPort Express, which is recommended for most users. The theory here is that devices will automatically connect to the best quality signal based on their capabilities and distance in relation to the AirPort Express.
It is possible to assign a different name to the 5 GHz band, and then "point" devices at that network to connect. Some users swear by this option.....(I am not one of them).... but you might want to give it a try to see how it works for you.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Express
Click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window
Click Wireless Options near the bottom of the next window
Enter a check mark next to 5 GHz Name.....which will automatically add "5 GHz" to the network name....so you can identify it
Click Save, then click Update and wait a full minute for the Express to restart
Now you will need to "point" your 5 GHz capable devices at the 5 GHz network name. 2.4 GHz devices will connect to your "other" network name.

Formatting a number element with commas and decimals.

I have a dataset with numbers. I already set the column type to "number".
I want to format the number data with commas and decimals. I found a way to add decimals, but I'm still very confused how to do commas and to combine that with the decimal formatting.
Also, how do I apply that to a repeat region in my spry region?
Any help would be appreciated. Thank you very much.

I found this on one of the forum questions.
Excel dont preserve the trailing zeros.
try opening the xcel and type 5.0000 and tab out, it wont preserve the trailing zeros after decimal.
try finding out how to disable the option in excel. if you do that, you will see what you send out from the report.
But you can try to convert the number into a text by trying to append a space at the beginning. See if that would work.
Thanks
Swarna

How do I select texte discontinuouly : one word here and another there

How do I select texte discontinuouly : one word here and another there, etc.

Use Pages '09.
Feature has been removed from Pages 5, along with 100+ others.
Peter

I have two iTunes accounts, one for music and another for audiobooks. I want to merge them and maintain only one iTunes account. How do I do it?

I have two iTunes accounts, one for music and another for audiobooks. I want to merge them and maintain only one iTunes account. How do I do it?

You cannot.

HT4527 how can i transfer my purchases from one windows pc to another without having access to the pc with the music on as it is broken

how do i transfer my purchases from one windows pc to another without having access to the pc with the music on it , as it is broken ?

on new pc - open itunes. sign into your account. go to settings. authorise the pc you are now using. go to account in itunes store. download purchases. simples.

Hello. It can be a iPhone4 accessories for the one with pictures and other things are transferred wirelessly to a TV? Thank you

Hello. It can be a iPhone4 accessories for the one with pictures and other things are transferred wirelessly to a TV? Thank you

You need an Apple TV to be able to wirelessly send pictures etc. from iPhone.
However you can buy an adapter if you want to connect to a TV
http://store.apple.com/us/product/MC953

I try to import pictures from aperture in to a new themed project in iMovie (the one with voyages) and it won't let me

I try to import pictures from aperture in to a new themed project in iMovie (the one with voyages) and it won't let me. Any ideea?

A wag at this. A port issue?
"Apple Push Notification network setup
When MDM servers and iOS devices are behind a firewall, some network configuration may need to take place in order for the MDM service to function properly. To send notifications from an MDM server to Apple Push Notification service, TCP port 2195 needs to be open. To reach the feedback service, TCP port 2196 will need to be open as well. For devices connecting to the push service over Wi-Fi, TCP port 5223 should
be open."
http://www.google.com/url?sa=t&rct=j&q=ports%20ios%20configure%20ipad&source=web &cd=1&ved=0CC0QFjAA&url=http%3A%2F%2Fimages.apple.com%2Fipad%2Fbusiness%2Fdocs%2 FiOS_MDM.pdf&ei=5lXGUPCcJMXx0gH2wYG4BA&usg=AFQjCNFzINvs7ktT-6o6Q_l4Qk2HkpjtCA&ca d=rja
google: ports ios configure ipad
Try it on your home network where there isn't a lot of 'controls' -- network filtering , firewalls, etc.
Robert

I just purchased an ibook for my mac for the first time and it started with two pages then switched to one with notes and i can't change it back. Anyone else having this problem?

I just purchased an ibook for my mac for the first time and it started with two pages then switched to one with notes and i can't change it back. Anyone else having this problem?

Up the top where the three buttons are (red yellow green) are three images. Click on the third image that looks like a notepad (not the first which is a library book), and that should get rid of 'Notes'. To read using two pages make the window bigger.

Updated my ipad yesterday and today can't connect to the internet by wifi or cellular. Have tried on 2 different wifi routers, one by Verizon and another by Comcast. updated 2 iphone 5S and ipad mini today and all 3 work fine. Any suggestions?

Updated ipad yesterday to 7.0.6 and now can't connect to internet. Tried cellular, Verizon and Comcast. Updated 2 iphone 5S and ipad mini today and all work fine. Any suggestions?

Has the unit EVER been jailbroke?
If "No," first try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

Same part number one with valuation and another without valuation

Similar Messages

Maybe you are looking for