Same SKU with different names in 2 systems
Hello All,
I am wokring on a SNP scenario. We have a finished sku A and its sub component sku C.
<b>A (FERT) ---> C (RM)</b>
We have forecast on sku A and want to find dependent demand in sku C thru SNP
<b>Forecast A -
> Find Dependent Demand C</b>
<b>sku A maintained in ERP1 R/3 system as FERT
sku C maintained in ERP 1 R/3 system with different name sku B as Raw material
sku C maintained in ERP2 R/3 system as FERT</b>
Now product A is maintained in one R/3 system and product C is in another R/3 system. Both these R/3 systems are connected to APO and both these materials are also in APO now.
After heuristic planning in SNP, we want to pass the dependent demand to ERP2 system as Sales Order.
My concern is if sku C has different name in 2 systems, how should I pass the demand to other system?
Please advice.
Thanks,
Sanju
Message was edited by:
Sanju
Maybe you can create SKU D in APO (and R3) which is lined through PPMs or PDS to SKU B from ERP1 and SKU C from ERP2 and aggregate the dependent demand generated during Heuristics to SKU D
then you can only transfer only SKU D to ERP2? Am not sure how important it is for you to hav the link between SKU D and SKU c in ERP2
Alternately
Dont transfer SKU C from ERP2 to APO. Only create Dependent demand for SKU C from ERP1 and transfer it to ERP2. You can run MRP again in ERP1 for the aggregated requirement (unless you want some APO specific functionality, the result must be close to what you will get in APO)
Similar Messages
-
Install many executable on the same PC with different names
Hello,
I'm trying to install several executables with different names in the same computer but at the end of install process the message is : "an higher or existing version is already installed in this computer"
I create the Executable and Setup with LabVIEW Application Builder and install the executable in the same Program Files root directory with a different sub-directory for each executable as this : Program Files-->MyProject-->SubProjet1 with exe1/SubProject2 with exe2 etc...
My OS is WinXP pro SP2 and I work with LabVIEW 8.5.
Thanks and regards,
Armindo PINTOHi Armindo,
Thank you for using the NI forums!
From what I understand, you are trying to create multiple executables of a vi project to co-exist on the same PC. Any time you re-use the LabView 8.x project file, it will generate
install package with the same product ID number. That means, if the
deployed PC has the previous version installed, which had been
generated from the same project file, the new install package will
remove the previous version and overwrite it with the new version. Or as in your case, not allow you to install lower versions of the executable. That
means, the previous version will be no longer available on the deployed
PC. If you are creating an upgraded version to the product this is
fine.
However, if you need to re-use the LabView 8.x project
file and generate a new product, which can potentially co-exist with
the previous on the end user PC, you need to generate a new installer
with a different product ID number. One of the way to do it:
Copy existing project file (e.g. "name1.lvproj") under a different name (e.g. "name2.lvproj")
Open the new instance of the project
Expand the "Build Specifications"
Right click on the installer specification, e.g. "name1 Installer"
Select "Duplicate" from the menu
You can now delete the instance "name1 Installer" and rename the "Copy of name1 Installer" to a suitable name, e.g. "name2 Installer"
Make changes that are needed between the two versions, for example:
Select a new source VI
Build a new exe file
Reflect the new exe file in the "name2 Installer"
Make
any other changes needed in "name2 Installer", for example different
documentation files included in install, change in the target install
directories, changes in the start menu shortcuts. etc.
Build the install.
Please let me know if this solves the issue, and let me know how you get on.
Kind regards,
Ashish Naik
Field Sales Engineer
National Instruments UK -
Backup and restore the wss_content db to the same server with different name
Hi,
I want to restore the content db of 80 port in my sp 2013 web appln to a different web appl. is this possible?
By default wss_content is pointing to the 80 port. so if i wanna take the backup of this content db and restore it in the same machine as a different content db name, is this achievable?
if this is achieved, i want to mount this newly restored content db to a new web appln.Hi Benjamin,
you could restore database with new name using below script
RESTORE
DATABASEWSS_Content_NewFROMDISK='C:\Program
Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Backup\WSS_Content.bak'
WITH
MOVE'WSS_Content'TO'C:\Program
Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\WSS_Content_New.mdf',
MOVE'WSS_Content_log'TO'C:\Program
Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\WSS_Content_Newt_log.ldf'
Regards,
Regards, <b>Khalil Kothia, PMP </b>
Blog -
Attempting to restore database to same server with different name.
I have just restored my production database to an earlier backup to recover from a major application error.
I now need to reatore a second copy of the database to recover some data which was lost as a result of the restore. The only place I can do this is on the same server.
I can't use duplicate database because the time I want is before the resetlogs time of the current version.
I don't think I can use recover using backup controlfile because restoring the control file will have the old database name. Can I restore the control file, rename the database and still use the rman backups of the original database?
If so how?
Can use set incarnation to get round the resetlogs issue without affecting the current database?
10gR2
Windows 2008 64-bit
Edited by: Jim Smith on Oct 27, 2011 8:54 PMHi
Database name can be the same ORACLE_SID must be unique on the machine and in specific ORACLE_HOME.
So effectively you can have 2 databases with the same name but instance names must be unique.
Paul -
How do Illstrator recognize if same plug-in will place with different name.
Hi All,
We are developing an Illutrator CS4 plug-in. we have source code of the plug-in. we need to add some extra features to that plug-in and build with new name. older one will work as it was. and newer one will work with new features. So both plug will resides same place with different name. the problem is, when I compile older soruce code and change the plug-in name. I'm getting error while loading plug-in it looks "older and newer version get conflict while name is different.
Is Illustrator maintain any unique ID for each plug-in. if so, then where should i look for in my code?
How do Illstrator recognize if same plug-in will place with different name?
Any help would be appriciated.
Thanks in advance,
JohirulI don't believe Illustrator has anything like a UID for plugins. If you want them to co-exist, either make them named differently or put them in different sub-folders.
On a related note, you CAN optionally set a plugin's name. You could then iterate over the plugin list at start up (before you set your name) and see if there's already a plugin with the same name. We do this to *prevent* our plugin from loading twice, but you don't seem to want that. I only mention this because this is about as close to 'unique identifiers' that AI gets, and frankly nothing stops you from having multiple plugins with the same name. -
SAPScript: export print form and import with different name?
Hi!
I need to export print form from one system and import it with different name to other system.
For this I run RSTXSCRP but the problem is that when I spefify different name for a form while importing, it gives an error...
I tried to edit exported file before importing changing form name inside a file, but this not helped...
Any ideas?
Will reward,
Mindaugasthanks for input, but I probably do not understand what you mean...
here is what I need:
for example: if I have ZNEWFORM in system1, then I need to export it from system1 and to import to system2 with form name ZNEWFORM_ZZ... is it possible?
thanks again,
M. -
Unable to copy database with different name in the same instance
I had a huge database and wanted to try some change optimization changes.
So wanted to make a copy of the database along with data in the same instance.
I have tried copy database wizard several times but always see the error as in attachment.
Can someone let me know how to troubleshoot further?
If this is not the correct way please suggest how do i copy a database with different name in the same instance along with data.Hi Nandu,
From the screenshot, the error 1813 happens when corrupt database log is attempted to attach to the SQL Server. To work around this issue, please preform the following steps, for more details, please review this
blog.
1. Create a new database with same name which you want to recover. Make sure that the MDF file and LDF file have same name with previous database data and log file.
2. Stop SQL Server. Move original MDF file from old location to new location by replacing just created MDF file. Delete the LDF file of new location just created.
3. Start SQL Server. At this point, the database is in suspect status.
4. Make sure that system tables of Master database allows to update the values. Please note that you will be performing this in query window.
Use Master
go
sp_configure 'allow updates',1
reconfigure with override
go
5. Change database mode to emergency mode.
SELECT *
FROM sysdatabases
WHERE name = 'DatabaseName'
BEGIN
UPDATE sysdatabases
SET status = 32768
WHERE name = ' DatabaseName '
COMMIT TRAN
6. Restart SQL Server. Then execute the following DBCC command in query window to create new log file.
DBCC TRACEON (3604)
DBCC REBUILD_LOG(databasename,'c:\yourdatabasename_log.ldf')
GO
7. Reset the database status using following command.
sp_RESETSTATUS yourdatabasename
GO
8. Turn off the update to system tables of Master database running following script.
USE MASTER
GO
sp_CONFIGURE 'allow updates',0
RECONFIGURE WITH OVERRIDE
GO
9. Reset the database status to previous status.
BEGIN
UPDATE sysdatabases
SET status = (value retrieved in first query of step 5)
WHERE name = 'DatabaseName‘
COMMIT TRAN
GO
Make sure that you have done all the steps in order and restarted SQL Server where it is mentioned. Also run SQL Server Management Studio as administrator.(Right click-> Run as Administrator)
Thanks,
Lydia Zhang -
Hi All, I am using iphone in UAE and ipad in India usinging same apple id. Earlier I could do imessage to my Ipad with different name but with software update,I am unable to do, as signing id for the iphone and ipad is same.How to restore back
I believe because you migrated from a Nokia to an iPhone you need to register the Bn phone number with your Apple ID so it can be used for iMessage. The Pn number seems to be the only one registered
Go here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Manage your Apple ID and see if that does the trick
Hope that helps -
To create multiple files with same content but with different names
Hi SapAll.
here i have got a tricky situation on Idoc to File Scenario.
in my interface of an Idoc to file ,there is requirement to create multiple files with different file names but with same content based on one Idoc Segment.
which means there will be one Zsegment with two fields in the idoc,where one field with (content refers to the name which file name should start with .so lets say if this segment is repeated for 3 times then PI should create 3 files in the same directory with same content but with different file names (from the filed).
so here for now iam using one reciever file communication channel.
can any body give me the quick answer.
regards.
VarmaWhat do you mean by different names?
when i make proper setting in the Receiver Channel....on how to create the filename (what to append) like add Timestamp, counter, date, messageid.....even in this case you will ahve file with different names and that too from same File channel.
You can perform multi-mapping in XI/ PI and then your File channel will place the files in the target folder with relevant names. You cannot use Dynamic Configuration with Multi-Mapping!
If you intend to use different File channels, then do the configuration as required (normal)...even over here you can follow multi-mapping.
Do not use a BPM!
Regards,
Abhishek. -
HELP!! Authorization in the same laptop with different operation systems
My BF installed Win 7 operation system on his laptop yesterday and re-authorized it when he used iTunes. However, when he finished authorization, a dialog block showing that "*Including this one, you have authorised two computers out of your available 5*" appeared; what's worse, when he connected his iPhone to the laptop, it deleted all the bought apps in the iPhone, instead of synchronizating.
I also want to install Win 7 operation system, but I'm afraid that the same thing would happen again (to my iTouch).
We're quite confused that why the authorization in the same laptop with different operation systems is counted as two times. Friends who know please tell us whether this is the case.. If not, please tell us how to deal with it as we frequently re-install operation system for quicker operation.
Message was edited by: Shiwen
Message was edited by: ShiwenIt's the *operating system* that is authorised, not the particular user profile or the hardware. Before upgrading/reinstalling deauthorise and you won't run out...
tt2 -
Can you have 2 ipods on the same accounts with different play list?
Can I have 2 ipods on the same accounts with different plalists?
Sure. Each iPod is identified in iTunes with its own name and you configure each one as you wish:
-
Same sqlID with different execution plan and Elapsed Time (s), Executions time
Hello All,
The AWR reports for two days with same sqlID with different execution plan and Elapsed Time (s), Executions time please help me to find out what is reason for this change.
Please find the below detail 17th day my process are very slow as compare to 18th
17th Oct 18th Oct
221,808,602
21
2tc2d3u52rppt
213,170,100
72,495,618
9c8wqzz7kyf37
209,239,059
71,477,888
9c8wqzz7kyf37
139,331,777
1
7b0kzmf0pfpzn
144,813,295
1
0cqc3bxxd1yqy
102,045,818
1
8vp1ap3af0ma5
128,892,787
16,673,829
84cqfur5na6fg
89,485,065
1
5kk8nd3uzkw13
127,467,250
16,642,939
1uz87xssm312g
67,520,695
8,058,820
a9n705a9gfb71
104,490,582
12,443,376
a9n705a9gfb71
62,627,205
1
ctwjy8cs6vng2
101,677,382
15,147,771
3p8q3q0scmr2k
57,965,892
268,353
akp7vwtyfmuas
98,000,414
1
0ybdwg85v9v6m
57,519,802
53
1kn9bv63xvjtc
87,293,909
1
5kk8nd3uzkw13
52,690,398
0
9btkg0axsk114
77,786,274
74
1kn9bv63xvjtc
34,767,882
1,003
bdgma0tn8ajz9
Not only queries are different but also the number of blocks read by top 10 queries are much higher on 17th than 18th.
The other big difference is the average read time on two days
Tablespace IO Stats
17th Oct
Tablespace
Reads
Av Reads/s
Av Rd(ms)
Av Blks/Rd
Writes
Av Writes/s
Buffer Waits
Av Buf Wt(ms)
INDUS_TRN_DATA01
947,766
59
4.24
4.86
185,084
11
2,887
6.42
UNDOTBS2
517,609
32
4.27
1.00
112,070
7
108
11.85
INDUS_MST_DATA01
288,994
18
8.63
8.38
52,541
3
23,490
7.45
INDUS_TRN_INDX01
223,581
14
11.50
2.03
59,882
4
533
4.26
TEMP
198,936
12
2.77
17.88
11,179
1
732
2.13
INDUS_LOG_DATA01
45,838
3
4.81
14.36
348
0
1
0.00
INDUS_TMP_DATA01
44,020
3
4.41
16.55
244
0
1,587
4.79
SYSAUX
19,373
1
19.81
1.05
14,489
1
0
0.00
INDUS_LOG_INDX01
17,559
1
4.75
1.96
2,837
0
2
0.00
SYSTEM
7,881
0
12.15
1.04
1,361
0
109
7.71
INDUS_TMP_INDX01
1,873
0
11.48
13.62
231
0
0
0.00
INDUS_MST_INDX01
256
0
13.09
1.04
194
0
2
10.00
UNDOTBS1
70
0
1.86
1.00
60
0
0
0.00
STG_DATA01
63
0
1.27
1.00
60
0
0
0.00
USERS
63
0
0.32
1.00
60
0
0
0.00
INDUS_LOB_DATA01
62
0
0.32
1.00
60
0
0
0.00
TS_AUDIT
62
0
0.48
1.00
60
0
0
0.00
18th Oct
Tablespace
Reads
Av Reads/s
Av Rd(ms)
Av Blks/Rd
Writes
Av Writes/s
Buffer Waits
Av Buf Wt(ms)
INDUS_TRN_DATA01
980,283
91
1.40
4.74The AWR reports for two days with same sqlID with different execution plan and Elapsed Time (s), Executions time please help me to find out what is reason for this change.
Please find the below detail 17th day my process are very slow as compare to 18th
You wrote with different execution plan, I think, you saw plans. It is very difficult, you get old plan.
I think Execution plans is not changed in different days, if you not added index or ...
What say ADDM report about this script?
As you know, It is normally, different Elapsed Time for same statement in different day.
It is depend your database workload.
It think you must use SQL Access and SQl Tuning advisor for this script.
You can get solution for slow running problem.
Regards
Mahir M. Quluzade -
Copying a script name with different name
Hi,
I want to copy my script form which has name zform1. Now i want to copy the same script form with different name i.e zform2 in the same client.
in my se71 window i do not have a copy icon on the toolbar.
pls. help me on how to do this.
Thanks,
Rose.Hi,
Please follow the steps below :-
1. Create a SCRIPT with the new name and just save it ( No need of defining any windows, just shot description is enough).
2. Open the newly created script in change mode and go to the tab 'Form' and press 'Copy from..' .
3. A small wondow will pop up, wherein you need to enter your previous SCRIPT name.
4.Once done, your script will be copied.
Please reward points if helpful. -
Must I define abstract interfaces with different names for BPM?
Must I define abstract interfaces with different names for BPM?
When interface appeared several times with different values and usage.
Of course they are the same message type.Hi,
Check this
RFC Scenario using BPM --Starter Kit
Regards
Seshagiri -
Identical pages with different names on website
Hi, I've recently put up a new website which completely
replaces the old one. I'm about to delete all the old pages off the
server, but I notice they're still coming up on google. Is it bad
practise to replace the old pages with my new ones, and leave two
copies of the page on the server but with different names? Eg, the
new page about restaurants and entertainment is called
"restaurants_entertainment.html" but the old page is just called
"restaurants.html". So I was thinking I could save my new page as
'restaurants.html' and put it onto the server as well, so that when
users click on the search results they get taken to the new
restaurant page and not the old one. I'm thinking this is not a
good thing to do? just wanting confirmation from the
experts...It's best, whenever possible, to give your new pages the same
filename as
your old pages -- so that basically, you're just replacing
the content on
each page.
If that's not possible, you need to 301 redirect from the old
pages to the
new pages, e.g., redirect from restaurants.html to
restaurants_entertainment.html, so that when people click on
the "old page"
in Google, or from their bookmarks, or in a link on another
site, they will
end up at your new page.
Sonjay
On 11/9/08 7:44 PM, "just_carly" wrote:
> Hi, I've recently put up a new website which completely
replaces the old one.
> I'm about to delete all the old pages off the server,
but I notice they're
> still coming up on google. Is it bad practise to replace
the old pages with
> my
> new ones, and leave two copies of the page on the server
but with different
> names? Eg, the new page about restaurants and
entertainment is called
> "restaurants_entertainment.html" but the old page is
just called
> "restaurants.html". So I was thinking I could save my
new page as
> 'restaurants.html' and put it onto the server as well,
so that when users
> click
> on the search results they get taken to the new
restaurant page and not the
> old
> one. I'm thinking this is not a good thing to do? just
wanting confirmation
> from the experts...
>
Maybe you are looking for
-
Any way to theme the dock in Mountain Lion
I've been using Dock Library for the past few versions of osx to theme my dock with a dark glass background, I find it much easier to see the icons with my choice of wallpapers if there is a dark contrast behind the icons. Is there any way to do this
-
Report to show hours booked against a project
Hi all, Does anyone know if there is there a report that will show the number of hours booked for labour against a project and that also shows a breakdown of the labour costs? Many thanks.
-
Hard drive failure (why can't I start up with boot disk)?
Running OS 10.4.6. I was getting flashing question mark at startup. Tried starting with Disk Warrior holding down "C" key. Got Apple logo, but then screen frooze with horizontal lines across screen. Rebooted, held mouse to eject disk. Tried TechTool
-
I want to restrict the display of F4 values in the standard tcode
In the standard tcode F-22 , for the customer display(F4 help values) ,i dont want to display a group or set of customers to be displayed. Which is the best way of doing this? Thanks . Edited by: peter k on Jan 19, 2009 7:27 AM
-
HT1338 i have i mac 7,1 with os x 10.5.8 how i can i update it?
I have I mac 7,1 with OS x 10.5.8 how I can I update it?