Samsung External Drive Not Working After Upgrade to 10.9

Hi,
I upgraded to Mavericks (10.9) on Friday and now my external drive does not show up when I connect it to my Macbook Air (2GHz Intel Core i7, 4 GB 1600 MHz DDR3).
My external drive is a 1 TB Samsung S2 Portable Drive.
I am attaching how it appears in Disk Utility now.
Please please can you help me? I'm nervous that I have lost all my personal data.
Thanks,
Emmett

The drive may have some software on it that is incompatible with Mavericks. Not your files that are on the drive, but something from the manufacturer of the drive.
There may be some software on your mac, also from the drive manufacturer, that is usually used for accessing the drive, and this may be incompatible with Mavericks.
Or your drive may just have taken a very inopportune time to die.
I'd try:
a different USB or firewire cable
It would help to give us more information about your computer. If you can, use EtreCheck Etresoft: EtreCheck to generate a system report and paste it in a response here.
Try a safe boot (restart, hold down shift until you see the Apple logo). Then try to mount the drive. If this works, then you know the problem is with some 3rd party software on your mac, probably some utility from the drive manufacturer. Mac OS X: What is Safe Boot, Safe Mode?
TechTool may be able to repair the drive so that you could mount it. Techtool Pro 7
Look on the drive manufacturer's website for an update to the software.
If you have another computer with Mountain Lion on it, perhaps you can use this computer to copy the files, then erase the drive, and then put the files back, without the incompatible software.
Maybe the drive will mount in target mode on your mac or another mac, and you could transfer the files. How to use and troubleshoot FireWire target disk mode

Similar Messages

Dvd drive not working after upgrade to osx10.9

Since my Macbook upgraded to 10.9 the DVD drive no longer works.
Putting in either a pre-recorded disc or a blank to burn results in the disc being ejected after spinning for a few seconds.
The SD card reader also stopped working but I was able to correct that problem.

Same problem here on a mid-2010 21.5" iMac. Will read CDs and 1 out of 100 DVDs (1 kids' DVD, weird) but generally nothing in DVD format.
I tried all the solves listed (change prefs, reset EMC and both PRAMs, boot from internet disks, even an Endust cleaning CD). Nada. I then set up a Joint Venture call and they diagnosed the drive as faulty after repeating all of the above. They say it's very possible that dying Superdrives can read CDs and even burn disks but not read DVDs. They said it'd be about $150 to replace the drive at a Genius Bar.
Here's where I try to be helpful.
If you're found this thread and you're not under warranty, don't waste ANY time testing it or trying to fix. Certainly don't roll back to previous software versions -- wasting hours of time and eliminating software features you may like or introducing incompatibilities. Just hop on over to Amazon and buy a $30 (not kidding) Amazon Basics external DVD drive. I ordered one w/ my cleaning disk knowing I'd prob need it and prob wouldn't want to pay Apple to fix my 3-year old machine. Works like an absolute charm for me. Faster ripping CDs than the Superdrive, plays DVDs through DVD Player, VLC, or XBMC instantly.
So my advice (ignore it if you like, it's worth what you paid for it) is to ignore any conspiracy theories about whether Apple planned this. IMHO, it doesn't matter for $30. Your time is worth more than $30. Just buy an external and get on with your life. You can even use it with your drive-less Air when you get one, if you don't have one already. How often can you solve a complex computer problem instantly, and be better off in the end, for $30? Just do it. End of advice.
HTH.

External Monitor Not Working After Upgrade

Hello friends.
I upgraded computer and software (Production Premium CS5.5). I use an external deck that is connected through Firewire. Premiere Pro sees the deck but does not output the image/video to it. I even managed to capture from the deck into Premiere without a problem. No matter what I've tried Premiere won't export to the NTSC monitor. It did in Production Studio Premium. With the Premiere software I had before it would export any SD NTSC image or video. I produce a weekly television show and my external NTSC monitor is a must for color calibration. Any help would be greatly appreciated.
CS5.5 Production Premium
Dual DVI monitors
Quadro 2000 video card
Windows pro 7 - 64bit
i7 with 16 gigs ram

>reply below
If you are talking about a different message, saying see "below" or "above" will have zero meaning just as soon as someone posts another message
Post the link to the message... this message is http://forums.adobe.com/thread/960405

USB Flash drive not working after upgrade.

Its a SanDisk 8GB USB memory stick with the U3 filesystem on it. It works fine on Windows machines and on 10.5, but won't show up as a useable volume in Finder when inserted into my MBP.
Oddly enough, it does show up when I run Parallels - but only in the windows VM. It also shows in Parallels in the list of attached USB devices.
It just won't mount as a volume.
Any ideas?

Hi,
copy anything on your drive to your desktop in parallels then reformat the drive.
There's a good article Here on how to format a drive for Mac and Windows.
Regards

Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)

Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)
what cAN i do to make it work?please help

Hi:
If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1

Super drive issue not working after upgrade of Maverick or Mountain Liont

Super drive issue not working after upgrade of Maverick or Mountain Liont
try this commands , it will wrk and respond after few trys
go to APPS - Utiltiy - Terminal
Put these commands in
drutil status
drutil info
drutil getconfig
drutil eject
it will keep ejecting for bit or sign of life in it and after couple try in 5 mins it will wrk. and dont waste ur money to buy new one .

Super drive issue not working after upgrade of Maverick or Mountain Liont
try this commands , it will wrk and respond after few trys
go to APPS - Utiltiy - Terminal
Put these commands in
drutil status
drutil info
drutil getconfig
drutil eject
it will keep ejecting for bit or sign of life in it and after couple try in 5 mins it will wrk. and dont waste ur money to buy new one .

Iphone 4 Home button not working after upgrade to OS 4.3.5

Iphone 4 Home button not working after upgrade to OS 4.3.5.Please help!!!!!!!!

It seems that settings of mail accounts have something to do with it. I've delete my gmail account and am now using Microsoft Exchange. It seems better, yet not perfect. The issue is definitely due to OS 4.3.1
Apple answer is - no answer. It is a shame that the quality of their products, in terms of design and concept, is not match by a care for customers. It is not normal that I, as a customer, have to spend hours reading Apple Discussions forum to try to understand what the problem is. A little more respect for a customer that spend big $$$ buying their products wouldn't hurt.

File- Export not working after upgrade from 11i to R12

Hi,
File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
Thanks and Regards,
Jagadeesha

Enabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
In Argument 1 - Type: String Value: global.frd_debug
Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
In Argument 0 - Type: Integer Value: 196613
In Argument 1 - Type: Number Value: 54
Out Argument 0 - Type: String Value: 12
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing FIND_MENU_ITEM Built-in:
In Argument 0 - Type: String Value: FILE.EXPORT
Out Argument 0 - Type: Integer Value: 19
Executing GET_MENU_ITEM_PROPERTY Built-in:
In Argument 0 - Type: Integer Value: 19
In Argument 1 - Type: Number Value: 79
Out Argument 0 - Type: String Value: TRUE
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing COPY Built-in:
In Argument 0 - Type: String Value: NULL
In Argument 1 - Type: String Value: GLOBAL.OUT
Executing USER_EXIT Built-in:
In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.OUT
Out Argument 0 - Type: String Value: N
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing GET_APPLICATION_PROPERTY Built-in:
In Argument 0 - Type: Number Value: 75
Out Argument 0 - Type: String Value: IHR40P
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
# 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
# 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3

Ipohone 4 hotspot not working after upgrading to ios7.1 ?

my ipohone 4 hotspot not working after upgrading to ios7.1 but my some friends having iphone 4s its works fine and those having iphone 4 it's not working although we all have same operator and same operating system (i.e ios 7.1).I think this is problem only with iphone 4 users with ios 7.1 , so apple plz fix it in ur next update.

You don't like the answer?
Again it's not a bug, use a supported carrier if you want Personal Hotspot.
Read the list one more time, if carrier is not on the list, IOS7.1 patch the loophole.
Message was edited by: ckuan

Web Service is not working after Upgrade SAP EHP6

Hi ,
Recently we upgraded SAP ECC 6.0 to EHP 6.
We have a custom web service which is consumed in .NET Application to get the Sold To from Sales Order.
the service is working perfectly before upgrade and it is not working after upgrade to EHP6.
When I tested the Service in WS Navigator in SAP, it is working fine.
We raised a message to SAP and SAP analyze the Traces and confirm that the HTTP Request Header coming from .NET application is not having User ID and Password , so it is throwing exception from SAP as unauthorized.
But in service it is configuration as basic authentication and log on using user id and password and .NET application is calling service by passing user ID & Password.
Customer is not happy as it is working before Upgrade and SAP confirmed every thing fine in SAP, but the service is not working.
we did the below steps.
Regenerated the configuration
Re imported the Certificates
Activated the service in SICF.
Please let me know if anybody have same problem or if any steps we are missing.
thanks.
Uma

after changing the .NET Application , Service is working fine.

TS1702 My app store, Apple ID, safari, and most other apps do not work after upgrading to iSO 6, How do i solve this problem?

My app store, Apple ID, safari, and most other apps do not work after upgrading to iSO 6, How do i solve this problem? Can somebody help me please?

The App store is a problem for many and I have not seen a solution.
What is "wrong" with your Apple ID?
Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.

IPhone 4's WIFI has been not working after upgraded to 6.1.3(10B329)

     My IPhone 4 was working fine with its WIFI when it is running in default IOS version, I believe it was 5.x.x version, however after I upgraded to 6.1.3(10B329) then WIFI got very aweired issues again and again.starting from then I never get my WIFI working again:
1. Sometimes I can connect to my home's network and keep alive for 1-2 minutes then WIFI will not work on IPone, my home's router is not working either, I need to restart my home's router manually;
2. I can connect to my office's network and keep alive 5-10 minutes then WIFI is not working, however my office router is not affected; however the following days then I can't connect WIFI to office's network any more.
3. I tried to connect to other public area's free network via WIFI, however never joined in.
     I called Apple's service centre couple of times they have no clues, they said they never met this problem before for WIFI not working after upgraded to IOS 6.1.3 and no suggestions from them at all, every time I called them they gave me the same suggestion, such as restore-re-install, check your own router etc, nothing help, however my friend bought a brand new IPhone 4 with default IOS version 6.1.3 which is working perfectly without any issues on its WIFI then I believe this is a completely software issue.
     I know this is a general issue for Apple users and I refuse to upgrade to higher version as I am not sure the higher version can fix this issue however I am pretty sure the newer version of IOS did bring a lot of new bugs, anyone can provide me any suggestions guys ? THANKS A LOTTTTTTTT!!!!!!!!!!!!!!!!
Terrence

I have fixed this issue after upgraded my router's firmware finally, this is a completely compatibility issue between Apple and other third party manufactures, hopefully we can get compabitlity list for each future IOS version ahead of time which can potentially avoid such kind of embarrassing situations moving forward, thanks !

IMessage does not work after upgrade to iOS 8.1.3 to my iPad 4

iMessage does not work after upgrade to iOS 8.1.3 on my iPad 4

I Fixed it by trying to sign in with a different ID and canceling when it asked For a password and then signed in with my ID and it works! No more error message. I got this idea from another discussion. Thank you for replying though.

My built in camera is not working after upgrading to a new Skype version

my built in camera is not working after upgrading to a new Skype version

See this thread:
https://discussions.apple.com/thread/5306216?tstart=0
FIX:
1. You need Time Machine
2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
4. Go to Time machine in date that skype work fine.
5. Change AppleCamera.plugin with file from Time Machine
6. Restart system, Now skype need to work with camera.
If that doesnt pass,
Suggest looking here, much success has been found:
http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4

ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite.

ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite. any salutation!!

Follow these steps:
go to system preferences.. Open Network..
CONFIGURATION: DEFAULT
TELEPHONE NUMBER : #99*
leave account name and password columns blank
Now go to ADVANCED
IN MODEM MENU
VENDOR : GENERIC
MODEL : GPRS / 3G
Press ok
Then CONNECT.. Enjoy.

Samsung External Drive Not Working After Upgrade to 10.9

Similar Messages

Maybe you are looking for