Sansung LCD Monitor mirroring

I have a new HP Pavilion M6-1045dx laptop using Window 7/64-bit. My 8-yr old widescreen Samsung Syncmaster 226cw monitor will not "mirror" the laptop display. The monitor is connected via an adapter which is a DVI-I female-to-VGA Male video converter. The female end is connected to the monitor and male end to laptop. How do I enable this monitor to work with this laptop so that I can choose to use both displays at the same time or choose just the monitor(preferred)? I am not using a wireless setup. I need step-by-step detailed instructions. I feel it must be a simple fix but I am not sure. This is my first post on this excellent forum. Thanks in advance!

TrailTrim wrote:
My iMac 24 LCD screen is damaged to the point where it is basically worthless. I have attached an external monitor via a VGA adaptor. Problem...since I cannot see the screen, I cannot get into system preferences to select "detect displays". Is there any way for the computer to detect the external monitor automatically?
The last message of this thread may help:
http://discussions.apple.com/thread.jspa?messageID=6909570

Similar Messages

External LCD Monitor Connection - Unacceptable Quality

Hello,
I have recently purchased a Mac, hoping that I would be able to connect to my external LCD monitor (19" Samsung SyncMaster 920NW - only VGA connection).
I have easily hooked up my monitor to my Mac. However, what I see is of unacceptable quality. When compared to Macbook display, the display on the external monitor is darker and the text looks horrible. I have played with few settings but nothing good.
I have read other threads where people complain about similar things. But, I thought Samsung's monitors would be of higher quality. Mine is a relatively cheap LCD but not this cheap
I am just willing to confirm that I am not missing anything. I simply can't believe that the display quality could be this bad. In the worst case, I will have to buy a new LCD.
Many thanks in advance.

Hello stedman1,
Thank you for your quick reply.
Unfortunately, it is not running in the Mirror mode. The display with the mirror mode was even worse! But after reading the posts in the forum, I have learned how to change it to the extended display. It is better than the mirror mode, but still not good enough.
Maybe I am making a mistake comparing the external monitor with the MacBook's monitor?? There is a huge gap between the two. It is a lot darker, and the text quality is way worse.
Someone with a similar monitor having solved this issues?
Thanks,
Guven.

External LCD monitors with DVI PowerBook: Banding Issues

I have a DVI PB and would like to attach an external LCD monitor. I've looked at both Samsung 20 inch and ViewSonic 19 inch versions but whenever I attach them, I get "banding" around the edges of the external monitor. Tonight, I went to CompUSA to look at the Samsung 204B 20 inch. Taking my PB with me, I hooked up and set the resolution to 1600 x 1200 and the Samsung had huge, fat black banding all around the monitor. If you don't know - banding looks like a large, black border going around the screen. The sales guy pushed some auto-set buttons (which is said always work to remove the banding) but it didn't fix the issue. Any suggestions? Is there some secret that I'm not aware of on how to attach and use an external LCD monitor with the PB? One note: I did set the resolution down to 1280 x 1024, which worked fine to remove the banding but it monitor looked horrible. Not the best resolution for a large monitor.
Thanks,
B. Rose
TiBook 800 & iBook SE Mac OS X (10.4.6)

Hi, Bill. I can't speak to whatever happened with the Viewsonic monitor, since you didn't tell us about that, but it sounds as though the Samsung was in display mirroring mode rather than extended-desktop mode. The F7 key on your Powerbook's keyboard toggles an external monitor between the two modes. In mirror mode, the external monitor displays exactly the same thing as the built-in display. In extended-desktop mode, it functions as a separate portion of your desktop, and you can drag things (windows, icons) from one monitor onto the other. If you're going to use both displays, extended-desktop mode is probably what you'll want: why keep two copies of the same thing in front of you?
In mirrored mode, the fact that your Powerbook's display has a maximum resolution of 1280 x 854 means that only 1280 x 854 pixels of the external monitor can be used — leaving wide black borders of untapped pixels around the copy of your PB's display that's centered on the external monitor. In extended-desktop mode, the external display's native resolution of 1600 x 1200 can all be used, provided that your 32MB of VRAM is sufficient to drive the total of (1280 x 854) + (1600 x 1200) = 3,013,120 pixels, at the bit depth you've selected. (You might have to use the extended-desktop mode in Thousands of colors, rather than Millions.)
Another issue that comes into play with display mirroring is that the 4:3 aspect ratio of the 1600 x 1200 Samsung is different from the 3:2 aspect ratio of the Powerbook's display. If you set the Samsung's resolution to 1280 x 1024 to match the pixel width of the PB display, the top and bottom of the Samsung will be black bands, because the PB isn't manufacturing any pixels to fill those bands. And it will be blurry, because the Samsung has to interpolate to make 1600 pixels look (sort of) like 1280 pixels. Unlike a CRT display, the actual number of pixels in an LCD is fixed. When you change resolution settings on an LCD from its native (maximum) resolution to anything less, the image is always blurred. Only the native resolution can be really sharp.

Samsung lcd monitor

Can
anyone please help,
Since I got a new Samsung 2032BW LCD monitor (widescreen), I need to change the Pixel Aspect Ratio or else the place where I take my pics
cant print it. I need to open one photo in photoshop change the PAR to square and save it. This I have to do with all photo's!!!
Please help

Mirroring means exactly the same thing will be on each screen. They both must run at the same format to mirror one another.
If you turn mirroring off, then the two screens can be set independently to their optimum resolution.
As far as your second question goes, I'm not sure. Are you saying that even when in mirror mode the second screen goes blank? In that case, I guess that means the game is taking control of the settings and turning mirroring off to free up maximum amounts of VRAM for the game. It's probably best that is happening because the game would no doubt experience a graphics slow down with less video memory at its disposal.

LCD monitor with Premiere Elem. 8

I'm investigating for the best replacement of my Premiere 6.5 / Matrox RT.X100 video editing system and actually testing Premiere Elements 8.
For previewing, I can only connect my external Samsung 2333 LCD monitor through my Sony DHR-1000NP cassette recorder, which seems crazy to me. Is it possible, and what are the settings, to connect the monitor directly to my PC using the DVI cable (graphics card is Nvidia GTS50)? And is it possible to have preview on both the desktop preview window AND on the external monitor? Or do I need again additional hardware? Thanks for advice.

Welcome to the discussions!
You should be able to see it in the full 1920 x 1080 resolution. You can use either mirrored or extended desktop, but not both at the same time. It is an "either/or" proposition.
Does this new display have a DVI port? I would use that if possible. I understand that HDMI is digital, but you will not get a better picture by using it over standard DVI. HDMI is DVI plus audio.

External 1080p LCD Monitor with Intel iMac

I have a 17" Intel iMAC. I would like to connect it to a new 40" 1080p LCD Monitor/TV. With the mini-DVI cable, and DVI to HDMI cable, will I be able to view 1920X1080 resolution on the external monitor? Will I be able to use both mirror and extended display modes? I am aware the internal graphic card can support up to 1920X1200 resolution.
Thanks.
iMAC Intel Dual Core Mac OS X (10.4.8)

Welcome to the discussions!
You should be able to see it in the full 1920 x 1080 resolution. You can use either mirrored or extended desktop, but not both at the same time. It is an "either/or" proposition.
Does this new display have a DVI port? I would use that if possible. I understand that HDMI is digital, but you will not get a better picture by using it over standard DVI. HDMI is DVI plus audio.

Connecting 2 LCD monitors to my Macbook?

Hello Everyone.
Ok, before I go poking around and stuff something up, can someone please answer my following questions. I am wanting to connect two LCD 22inch monitors to my Macbook Pro.
1. How do I do this?
2. Instead of buying Apple screens, are there any other good LCD monitors that will do just a good a job?
Please help.
Thanks....I love my MAC

1. http://www.matrox.com/graphics/en/corpo/products/home.php
check graphic expansion modules
2. for serious work I would strongly recommend eizo monitors. current apple displays simply cant compete with them. They are very outdated and therefore overpriced. they have poor adjusting possibilities..in both picture and stands.
tutmir

I just bought a recertified Mac Mini, and I wonder if anyone here knows if it's possible to hook up my Mac flat screen LCD monitor to it using what adapters? I currently have a DVI to ADC adapter connected to my G4 Powermac.

I just bought a recertified Mac Mini core duo - it's not the newer model-, and I wonder if anyone here knows if it's possible to hook up my Mac flat screen LCD monitor to it and using what adapters? I currently have a DVI to ADC adapter connected to my G4 Powermac.
The company I bought it from is not Apple, and I may regret that. It was in my price range, though.
This is the first time I've used this community, and I've been a Mac owner since 2000. Thanks in advance!

when you say "Mac flat screen LCD", do you mean this:
http://www.ares-woo.com/christmas2005/images/pc_cine.jpg
if it is, you might wanna try this:
http://store.apple.com/us/product/MB570Z/A?mco=MTY3ODQ5OTY

LCD Monitor with B&W G3 Tower

Hello, I am looking to replace my 17" Apple Studio Display CRT on my G3 B&W Tower with an LCD monitor. My questions are: 1) Will my computer (VGA port) accept any current LCD screens on the market, or do I have to stay with Apple's LCD monitors? 2) There are several Apple Studio LCD Displays offered on eBay. They mention DVI and ADC connections. How do I know which models will work with my B&W G3? Forgot to mention that I have upgraded the processor with a Sonnet G4 500Mhz. Thanks.

Hi,
your B&W (like mine) should be equipped with a standard VGA output on your video card, which should accept any monitor with a VGA connection.
I tried a couple of LCD (a Samsung and a Hewlett Packard) which worked flawlessly and did not give me any problems.
I am not sure whether you can connect any of the current generation Apple flat screens due to the different interface, but you surely can take advantage of any VGA equipped LCD.
cheers

Two 24" LCD Monitors with FCP / Motion

I have a Mac Pro (early 2009) with the new ATI Radeon 4890 dual DVI video card and one Apple 24" LCD monitor. I'm using this setup for primarily FCP/Motion work. Question:
- Can the ATI Radeon 4890 handle two 24" LCD monitors, or do I need to purchase a second video card?
- Can FCP / Motion handle two video cards?
Thanks!
lance

Can the ATI Radeon 4890 handle two 24" LCD monitors
ABSOLUTELY. There are two monitor connections on the card. One DVI, the other the Apple connector.
Can FCP / Motion handle two video cards?
Yup. Most FCP workstations I have been on, and personally own, are two monitor setups. That is a fairly typical setup.
Shane

External 1920 x 900 LCD Monitor on MBP

I am wondering if I connect an LCD monitor that has a 1920x900 native resolution, if I can get that resolution when it is connected to my MBP?

Yes. The MacBook's video card can drive an external monitor up to 2560x1600.

Hyundai LCD monitor won't work with OS9

New Hyundai LCD monitor -dual input. Works fine with Windows XP, & with OS 10 but when I boot into OS9 the screen goes black, & the screen's menu button won't work. Have started os9 in safe mode but cannot find how to change the display/resolution/refresh settings. Where do I look to change these settings? And what settings should I try?

Have posted more on this in thread in "older hardware".
http://discussions.apple.com/thread.jspa?messageID=6115403#6115403. I hope this is the right link, thought I shouldn't duplicate postings.
Would very much welcome any more suggestions you might have
It's ATY rage 128 pro, VRAM 16MB
1024x768@60HZ, 32 bit colour

32" LCD Monitor - Best Resolution???

Hello all -
I just bought an Olevia LT32HVE LCD monitor to use with my G5. I'm wanting to find the best resolution setting so that it won't be horizontally whacky, yet still a good amount of real estate on the screen. At the recommendation of a friend who has a 42" monitor, I downloaded Display ConfigX so that I could change the default settings. After registering and installing, I changed the resolution from 1280x1024 to 1280x720 as my friend suggested. The resolution now LOOKs OK, but it's a bit large for my taste. I'd like to get a bit more real estate on the screen by making the overall image more condensed. The LCD manual says that it's highest resolution is 1366x768, but when I tried that, the monitor blanks out (to blue) and says the rate is not supported. Probably has something to do with the refresh rate as well? I then have to hook up a second monitor just to get the large one to come back (viewing-wise).
Any suggestions on some resolutions that this LCD monitor will be able to use? Or am I missing a key factor?
Thanks -
G5 Dual 2.0Gig Mac OS X (10.3.9)

I was able to get the monitor to work at 1360x768 @ 60hz, but it looked a little rough around edges. Looks better at 1280x720 in terms of clarity and sharpness. But it's still the exact same size (at least, viewing-wise) as 1280x720.
Is there any way to get more real estate happening? Even though it's not horizontally crazy now, it's overall still very large.
Thanks -

DVI.I to VGA LCD monitor

Hi Everyone
Is there anything to gain by using the DVI connection on my MSI FX5900XT graphics card
to the VGA port on a DELL 19" LCD Monitor ?
I was just wondering as the card came with an adaptor DVI/VGA so I can use either output on the card.
At the moment I am connected VGA to VGA
cheers
riggie

Apple didn't ship a 2.4GHz MacBook until February of 2008. If that's the model you have, or an earlier model, it has a mini-DVI port which would take the mini-DVI to VGA adapter. To confirm, run System Profiler, click on the Hardware heading at the very top of the left-side list, and tell us what the Model Identifier reports.
Regards.

What connects do I need to hook up a 2nd LCD monitor to my p7-1380t HP computer?

My current monitor is a Samsung Starlight LCD monitor hooked up to my p7--1380t (approx 23 inches). I want to set up a 2nd monitor which is a DELL LCD (unable to find monitor model #).
Can you advise me which ports to use on the back of my computer and which cable type I should get for the Dell monitor?

Okrafarmboy, welcome to the forum.
We don't have information on Dell monitors. However, I believe that it will be either VGA or DVI (D or I). It depends on the age of the monitor.
Here is a guide to help you connect the two monitors to the computer.
Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Sansung LCD Monitor mirroring

Similar Messages

Maybe you are looking for