SAP 6.0 installation with MCOD

Hi,
Has there been wide spread adoption of MCOD?
Is a SAP deploment with MCOD significantly more challenging and cumbersome to maintain?
Thanks
Gaurav

Hi Gaurav,
Chk the link below:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50a1b7a6-8307-2a10-05bc-d4388cbd4201&overridelayout=true
Rgds,
vishnu

Similar Messages

  • SAP ECC6.0 installation with Oracle RAC

    Hi Expert,
    Current we working on SAP ECC6.0 installation with Oracle 10G RAC on AIX 5.3. The RAC are running on two nodes (servers). And we are using GPFS filesystem (not running on HACMP).
    Overall we had completed the Oracle RAC installation (CRS+RDBMS) and tested the oracle failover and it work find. Now we want to start with the SAP installation (with HA). In the SAP installation documentation, it did request to create a virtual hostname on the node and execute the sapinst scripts with below command line.
    #./sapinst SAPINST_USE_HOSTNAME=ascs00
    But if we are running on Oracle RAC + GPFS do we need to specify the virtual hostname? If not, which hostname i should use to install the HA for SAP?  Please advice.
    Regards.

    And then I'd continue with the documentation at:
    SAP on Oracle => SAP on Oracle Real Application Clusters (RAC) 
    There you can find several installation guides for windows/UNIX/Linux

  • SAP EHP5 MSCS installation with IBM DB2 9.7 on windows 2008 R2

    Dear Sir
    i am installing SAP EHP5 high availability with IBM DB2 9.7 on windows 2008 R2
    first cluster node installation is completed,
    now i am going to install database instance, before that i am configuring the database for MSCS as per installation guide,
    but the database group is note creating in Failover cluster manager.
    if you have any solution please reply
    regards
    gourishankar baikerikar

    HI,
    Thats a printing mistake in installation guide..
    copy db2mscs.ese file to db2mscs.cfg ...
    Remove all the unwanted stuff like explination of parameter paragraphs
    Confgure required parameters like  below and make sure there are no unwanted spaces in the txt file.
    #Global section
    DB2_INSTANCE = DB2SID
    DB2_LOGON_USERNAME = XXXXXX\db2sid
    DB2_LOGON_PASSWORD = password
    CLUSTER_NAME = GXXXXX
    MSCS Group for Node 0
    GROUP_NAME = DB2 SID Group
    DB2_NODE = 0
    #IP_NAME = DB2 IP SID
    #IP_ADDRESS=192.168.0.xx
    #IP_SUBNET=255.255.255.0
    #IP_NETWORK=Ethernet(3)
    NETNAME_NAME =  DB2 NetName SID
    NETNAME_VALUE = DB2SID
    #NETNAME_DEPENDENCY = DB2 IP SID
    Open you cluster console and select NODE A there you should be able to identify the disks for DB clustering,
    Copy that name and paste it here for  DISK_NAME
    DISK_NAME = DATABASE_CD2                  
    DISK_NAME = DBLOGS_CD4
    #INSTPROF_DISK = Disk M:
    #TARGET_DRVMAP_DISK = Disk M:
    With the above process you should be able to cluster your DB.
    2) Please provide all the steps that you were identified to install , that would give more clarity to reply back where ever required.
    Thanks,
    Rahul

  • SAP GUI 710 installation with BW 3.5 addon - BW Browser has disappeared

    Dear all,
    I hope someone can help with a BW 3.50 add-on problem following SAP GUI patching.
    I'm doing a local installation of SAP GUI 710 Compilation 3.
    I have selected the following three options:
    1. SAP GUI for Windows 7.10 (Compilation 3)
    2. BW 3.50 Add-On for SAP GUI 7.10
    3. Business Explorer
    (We require both BW add-ons for version reasons.)
    Following this I have applied the SAP GUI Level 13 Patch (gui710_13-10002995.exe).
    Up to this point, everything works as expected and I can still see the BW Browser at Start --> Programs --> Business Explorer --> Business Explorer (SAP BW 3.x) --> Browser (SAP BW 3.x)
    However, when I apply the BW 3.50 Add-On Level 6 Patch (bw350gui710_6-10004473.exe) the Browser disappears from the menu and I can't locate it anywhere. A reboot wasn't required although I did this anyway with no visible effect.
    I did try uninstalling everything and attempted the same process, but with SAP GUI Patch Level 12, and combinations with BW 3.50 Add-On Patch Level 4 but with the same result.
    Has anyone else come across this issue, or know what has happened?
    Thanks.

    We have a similar setup, utilizing all 3 as you do.
    Since we are currently at Browser patch 4, eventually headed to patch 6, I threw your situation into our VM enviroment and tested the installation of Browser patch 6.  Interesting enough, a clean install of Windows XP, Office 2003, and then GUI 7.10 with patch 13 and Browser 3.5 sp4 works as normal.  Once I applied SP6 for the Browser, I still have the icon under the Start menu but the wdbbapp.exe is gone. 
    Thanks to the VM test enviroment, I was able to recreate the scenario in a few moments and this time prior to installing the patch 6 for the Browser, I set it up to catch all the changes the SAP installer makes when applying sp6.
    The installation performed the following activity:
    13 files added
    4 files deleted
    141 files updated
    363 registry entries added
    522 registry entries deleted
    129 registry entries updated
    Of the 4 files deleted, one of them is the BEx Browser (wdbbapp.exe) - which is why my shortcut won't work
    Of the 13 added, none of them are the file being replaced. 
    Of the 141 modified, none are this file either.
    I am still going through the log but have not seen anywhere it will make a difference if the file is not there.
    Again, I am not saying there is a problem, perhaps they changed the way it is accessed, I am not fully up on the process of the BEx Browser.  SAP may have something mentioned about it on their GUI/BEx site or a note, this is just my preliminary findings.
    Regards,
    Zecher

  • SAP R-3 IDES 4.71 installation with Oracle9i

    Hello
    I am having problems installing SAP R-3 IDES 4.71 installation with Oracle9i on windows 2003 Server. The log file comes up with this erorr
    INFO 2008-05-14 22:50:30
    Changed working directory to C:\SAPinst ORACLE SAPINST.
    INFO 2008-05-14 22:53:59
    See 'C:\usr\sap\DEV\SYS\exe\run/startsap name=DEV nr=00 SAPDIAHOST=bw2003' output in 'C:\SAPinst ORACLE SAPINST\startsap.log'.
    TRACE
    ProgramReturnCode='-1' means error.
    ERROR 2030-05-14 22:53:59
    MOS-01012  PROBLEM: 'C:\usr\sap\DEV\SYS\exe\run/startsap name=DEV nr=00 SAPDIAHOST=bw2003' returned with '-1' which is not a defined as a success code.
    Windows 2003 Server
    AMD 2GH Dual core
    2GB Ram
    250GB HDD
    Computer name: bw2003
    Central instance: DEV
    I checked the host file system32/drivers/etc the IP adress and the host name is there.
    I am hoping  that someone could help me with the installation  thanks in advance.
    waiting .....

    ok here you go
    dev_disp
    trc file: "dev_disp", trc level: 1, release: "620"
    Sat May 18 00:27:08 2030
    kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
    length of sys_adm_ext is 304 bytes
    systemid   560 (PC with Windows NT)
    relno      6200
    patchlevel 0
    patchno    674
    intno      20020600
    pid        2276
    ***LOG Q00=> DpSapEnvInit, DPStart (00 2276) [dpxxdisp.c   978]
         shared lib "dw_xml.dll" version 674 successfully loaded
         shared lib "dw_xtc.dll" version 674 successfully loaded
         shared lib "dw_stl.dll" version 674 successfully loaded
    MtxInit: -2 0 0
    DpShMCreate: sizeof(wp_adm)          9776     (752)
    DpShMCreate: sizeof(tm_adm)          1690816     (8412)
    DpShMCreate: sizeof(wp_ca_adm)     18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpShMCreate: sizeof(comm_adm)     192000     (384)
    DpShMCreate: sizeof(wall_adm)     (22440/34344/56/100)
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 042F0040, size: 1974816)
    DpShMCreate: allocated sys_adm at 042F0040
    DpShMCreate: allocated wp_adm at 042F0560
    DpShMCreate: allocated tm_adm_list at 042F2B90
    DpShMCreate: allocated tm_adm at 042F2BB8
    DpShMCreate: allocated wp_ca_adm at 0448F878
    DpShMCreate: allocated appc_ca_adm at 04493EC8
    DpShMCreate: allocated comm_adm_list at 04495638
    DpShMCreate: allocated comm_adm at 04495650
    DpShMCreate: allocated ca_info at 044C4450
    DpShMCreate: allocated wall_adm at 044C4458
    MBUF state OFF
    Sat May 18 00:27:09 2030
    EmInit: MmSetImplementation( 2 ).
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation std
    <EsNT> Memory Reset enabled as NT default
    <EsNT> EsIUnamFileMapInit: Initialize the memory 307 MB
    <ES> 306 blocks reserved for free list.
    ES initialized.
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, NiPServToNo ( sapmsDEV) [nixxi.c      2599]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    ***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c   1451]
    Sat May 18 00:27:18 2030
    CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
    Sat May 18 00:27:32 2030
    CCMS: start to initalize 3.X shared alert area (first segment).
    Sat May 18 00:27:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    Sat May 18 00:27:50 2030
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:28:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:28:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:28:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:29:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    ERROR => W0 (pid 2328) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W0
    ERROR => W11 (pid 2416) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W11
    my types changed after wp death/restart 0xbf --> 0xaf
    ERROR => MsIModTypes: not_attached [msxxi.c      1567]
    Sat May 18 00:29:30 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    ERROR => W5 (pid 2368) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W5
    ERROR => W6 (pid 2376) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W6
    ERROR => W7 (pid 2384) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W7
    my types changed after wp death/restart 0xaf --> 0xad
    ERROR => MsIModTypes: not_attached [msxxi.c      1567]
    Sat May 18 00:29:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    ERROR => W2 (pid 2344) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W2
    ERROR => W8 (pid 2392) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W8
    ERROR => W10 (pid 2408) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W10
    ERROR => W12 (pid 2424) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W12
    my types changed after wp death/restart 0xad --> 0x89
    ERROR => MsIModTypes: not_attached [msxxi.c      1567]
    Sat May 18 00:30:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    ERROR => W1 (pid 2336) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W1
    Sat May 18 00:30:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:30:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:31:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:31:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:31:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:32:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    ERROR => W3 (pid 2352) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W3
    ERROR => W4 (pid 2360) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W4
    ERROR => W9 (pid 2400) died [dpxxdisp.c   11523]
    force unlock of wp_adm mutex W9
    Sat May 18 00:32:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:32:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:32:51 2030
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   3885]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   3966]
    Sat May 18 00:33:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:33:11 2030
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   3885]
    Sat May 18 00:33:13 2030
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   3885]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   3966]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   3966]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   3885]
    Sat May 18 00:33:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:33:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:34:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:34:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:34:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:35:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:35:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:35:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:36:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:36:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:36:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:37:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:37:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:37:33 2030
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   3885]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   3966]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c   3885]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   3966]
    ERROR => MsISnd2: not_attached [msxxi.c      1139]
    ***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c   3966]
    Sat May 18 00:37:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:38:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:38:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:38:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:39:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:39:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:39:49 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:40:09 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:40:29 2030
    ***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
    ***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c      2580]
    ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c      545]
    Sat May 18 00:40:30 2030
    caught signal 2
    Sat May 18 00:40:42 2030
    ***LOG Q05=> DpHalt, DPStop ( 2276) [dpxxdisp.c   7883]
    dev_w0
    trc file: "dev_w0", trc level: 1, release: "620"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, M
    B 
    B Sat May 18 00:27:19 2030
    B  create_con (con_name=R/3)
    B  Loading DB library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
    B  Library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' loaded
    B  Version of 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' is "620.02", patchlevel (0.549)
    B  New connection 0 created
    M  systemid   560 (PC with Windows NT)
    M  relno      6200
    M  patchlevel 0
    M  patchno    674
    M  intno      20020600
    M  pid        2328
    M 
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2328) [dpxxdisp.c   1028]
    I  MtxInit: -2 0 0
    M 
    M Sat May 18 00:27:24 2030
    M  DpShMCreate: sizeof(wp_adm)          9776     (752)
    M  DpShMCreate: sizeof(tm_adm)          1690816     (8412)
    M  DpShMCreate: sizeof(wp_ca_adm)     18000     (60)
    M  DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    M  DpShMCreate: sizeof(comm_adm)     192000     (384)
    M  DpShMCreate: sizeof(wall_adm)     (22440/34344/56/100)
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 04AF0040, size: 1974816)
    M  DpShMCreate: allocated sys_adm at 04AF0040
    M  DpShMCreate: allocated wp_adm at 04AF0560
    M  DpShMCreate: allocated tm_adm_list at 04AF2B90
    M  DpShMCreate: allocated tm_adm at 04AF2BB8
    M  DpShMCreate: allocated wp_ca_adm at 04C8F878
    M  DpShMCreate: allocated appc_ca_adm at 04C93EC8
    M  DpShMCreate: allocated comm_adm_list at 04C95638
    M  DpShMCreate: allocated comm_adm at 04C95650
    M  DpShMCreate: allocated ca_info at 04CC4450
    M  DpShMCreate: allocated wall_adm at 04CC4458
    X 
    X Sat May 18 00:27:28 2030
    X  EmInit: MmSetImplementation( 2 ).
    X  <ES> client 0 initializing ....
    X  Using implementation std
    M  <EsNT> Memory Reset enabled as NT default
    X  ES initialized.
    M 
    M Sat May 18 00:27:33 2030
    M  calling db_connect ...
    C  Got ORACLE_HOME=C:\oracle\ora92 from environment
    C 
    C Sat May 18 00:28:05 2030
    C  Client NLS settings: AMERICAN_AMERICA.WE8DEC
    C 
    C Sat May 18 00:28:06 2030
    C  Logon as OPS$-user to get SAPDEV's password
    C  Connecting as /@DEV on connection 0 ...
    C  Attaching to DB Server DEV (con_hdl=0,svchp=062414CC,svrhp=06243724)
    C 
    C Sat May 18 00:28:17 2030
    C  Starting user session (con_hdl=0,svchp=062414CC,srvhp=06243724,usrhp=0624BEFC)
    C 
    C Sat May 18 00:28:33 2030
    C  Now I'm connected to ORACLE
    C  Got SAPDEV's password from table SAPUSER
    C  Got SAPDEV's password from OPS$-user
    C  Disconnecting from connection 0 ...
    C 
    C Sat May 18 00:28:34 2030
    C  Closing user session (con_hdl=0,svchp=062414CC,usrhp=0624BEFC)
    C  Now I'm disconnected from ORACLE
    C  Connecting as SAPDEV/<pwd>@DEV on connection 0 ...
    C  Starting user session (con_hdl=0,svchp=062414CC,srvhp=06243724,usrhp=0624BEFC)
    C  Now I'm connected to ORACLE
    C  Database NLS settings: AMERICAN_AMERICA.WE8DEC
    C  Database instance dev is running on BW2003 with ORACLE version 9.2.0.2.1 since 20300518
    B 
    B Sat May 18 00:28:35 2030
    B  Connection 0 opened
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT Date     Time   DBHost
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  20300518 002733 BW2003
    M 
    M Sat May 18 00:28:36 2030
    M  db_connect o.k.
    I 
    I Sat May 18 00:29:01 2030
    I  MtxInit: 0 0 0
    X 
    X Sat May 18 00:29:02 2030
    X  EmInit: MmSetImplementation( 2 ).
    X  <ES> client 0 initializing ....
    X  Using implementation std
    X  ES initialized.
    B  db_con_shm_ini:  WP_ID = 0, WP_CNT = 13
    B  dbtbxbuf: Buffer TABL  (addr: 0C2000C8, size: 30000000, end: 0DE9C448)
    B  dbtbxbuf: Buffer TABLP (addr: 0DEA00C8, size: 10240000, end: 0E8640C8)
    B  Layout of EIBUF buffer shared memory:
    B  0: 1 * 4 = 4
    B  1: 1 * 276 = 276
    B  2: 13 * 20 = 260
    B  3: 4001 * 40 = 160040
    B  4: 2000 * 128 = 256000
    B  5: 4001 * 4 = 16004
    B  6: 1 * 100 = 100
    B  7: 65 * 4 = 260
    B  8: 29385 * 128 = 3761280
    B  Tracing = 0, Shm Protection = 0, Force checks = 0
    I  *** ERROR => [CreateOsShm] CreateFileMapping(54,4096 KB) failed with Err=1455
                  ERROR_COMMITMENT_LIMIT: The paging file is too small for this operation to complete.  [shmnt.c      2055]
    I  *** ERROR => ShmCreate: Create (54,4194384,1) failed [shmnt.c      469]
    Memory diagnostic                                 *
    Systeminformation
    Processor-Typ             : Intel unknown
    Processor-Count           : 1
    Operating System          : NT 5.2, Build 3790
    Service Pack              : Service Pack 1
    NT Pagefile Informations
    Config. minimum size      : 589824 K
    Config. maximum size      : 1179648 K
    Avail.  maximum size      : 1179648 K
    Num
    Pagefile
    Min.Size
    Max.Size
    Avail.Max
    Curr.Size
    1
    C:\pagefile.sys
    589824 K
    1179648 K
    1179648 K
    1178900 K
    NT Task Manager Informations
    Total Handles             :        0
    Total Threads             :        0
    Total Processes           :        0
    Commit Charge Total       :  1670224 K
    Commit Charge Limit       :  1676596 K
    Commit Charge Peak        :  1670376 K
    Phys.Memory Total         :        0 K
    Phys.Memory Available     :        0 K
    File Cache                :        0 K
    Kernel Memory Total       :        0 K
    Kernel Memory Paged       :        0 K
    Kernel Memory Nonpaged    :        0 K
    Memory usage of current process
    Total virt.address space  :  2097024 K
    Avail.virt.address space  :  1133576 K
    Private Pages             :        0 K
    Total heap size           :    10729 K
    Virtual memory regions    :        0 K
    Uncommitted heap memory   :     4108 K
    Allocated heap memory     :     4406 K
    Moveable heap memory      :       24 K
    DDE shared heap memory    :        0 K
    Memory usage of all processes
    PID
    Image
    Instance
    Work.Set
    WS Peak
    Priv.Pages
    PP Peak
    Pg Fault
    4
    72 K
    2100 K
    0 K
    0 K
    3
    352
    smss.exe
    212 K
    448 K
    144 K
    160 K
    0
    424
    winlogon.exe
    996 K
    9048 K
    6188 K
    6580 K
    3
    468
    services.exe
    1276 K
    3136 K
    1436 K
    1564 K
    0
    480
    lsass.exe
    2148 K
    6544 K
    7048 K
    7048 K
    1
    676
    svchost.exe
    552 K
    2508 K
    832 K
    832 K
    0
    848
    svchost.exe
    4840 K
    22520 K
    13348 K
    19208 K
    9
    972
    spoolsv.exe
    712 K
    4060 K
    3220 K
    3228 K
    1
    1124
    svchost.exe
    392 K
    1956 K
    476 K
    476 K
    0
    1176
    agntsrvc.exe
    948 K
    7720 K
    9128 K
    9128 K
    1
    1196
    TNSLSNR.exe
    2432 K
    5720 K
    5764 K
    5776 K
    1
    1212
    cmd.exe
    384 K
    1572 K
    1488 K
    1488 K
    0
    1228
    ORACLE.EXE
    122564 K
    135924 K
    203080 K
    205256 K
    38
    1324
    SAPSTARTSRV.EXE
    2520 K
    13364 K
    14828 K
    14828 K
    3
    1420
    VMwareService.exe
    928 K
    2164 K
    604 K
    604 K
    0
    1528
    dbsnmp.exe
    2240 K
    11312 K
    13608 K
    39264 K
    3
    1816
    Explorer.EXE
    2928 K
    15120 K
    10200 K
    10332 K
    13
    1864
    jusched.exe
    252 K
    1764 K
    432 K
    432 K
    0
    1872
    VMwareTray.exe
    724 K
    3144 K
    852 K
    888 K
    0
    1880
    VMwareUser.exe
    1376 K
    3284 K
    1032 K
    1048 K
    0
    1996
    svchost.exe
    488 K
    3740 K
    1440 K
    21664 K
    1
    216
    svchost.exe
    800 K
    3708 K
    2788 K
    2788 K
    0
    2080
    sapinst.exe
    82868 K
    105272 K
    84324 K
    105292 K
    41
    2088
    javaw.exe
    6944 K
    21272 K
    20396 K
    20896 K
    6
    2200
    startsap.exe
    460 K
    1772 K
    748 K
    748 K
    0
    2212
    sapstart.exe
    1244 K
    3176 K
    1188 K
    1188 K
    0
    2276
    disp+work.exe
    [DP] DEV_00
    26740 K
    42464 K
    30176 K
    30176 K
    10
    2312
    gwrd.EXE
    [GW] DEV_00
    1852 K
    6116 K
    3936 K
    8208 K
    1
    2320
    icman.EXE
    56440 K
    60192 K
    75880 K
    75880 K
    17
    2328
    disp+work.EXE
    [WP] DEV_00
    10700 K
    11516 K
    43684 K
    43788 K
    7
    2336
    disp+work.EXE
    [WP] DEV_00
    6696 K
    13084 K
    42180 K
    42180 K
    6
    2344
    disp+work.EXE
    [WP] DEV_00
    10896 K
    14092 K
    42180 K
    42180 K
    6
    2352
    disp+work.EXE
    [WP] DEV_00
    10088 K
    14588 K
    42176 K
    42176 K
    6
    2360
    disp+work.EXE
    [WP] DEV_00
    9320 K
    12960 K
    42184 K
    42184 K
    6
    2368
    disp+work.EXE
    [WP] DEV_00
    9480 K
    13076 K
    42184 K
    42184 K
    6
    2376
    disp+work.EXE
    [WP] DEV_00
    10060 K
    13220 K
    42180 K
    42180 K
    6
    2384
    disp+work.EXE
    [WP] DEV_00
    10024 K
    15128 K
    42184 K
    42184 K
    6
    2392
    disp+work.EXE
    [WP] DEV_00
    6576 K
    14752 K
    42180 K
    42180 K
    6
    2400
    disp+work.EXE
    [WP] DEV_00
    8812 K
    13436 K
    42184 K
    42184 K
    6
    2408
    disp+work.EXE
    [WP] DEV_00
    8552 K
    16140 K
    42180 K
    42180 K
    6
    2416
    disp+work.EXE
    25744 K
    25972 K
    41644 K
    43788 K
    10
    2424
    disp+work.EXE
    [WP] DEV_00
    6848 K
    11060 K
    42180 K
    42180 K
    6
    Sum
    460128 K
    1063904 K
    B  dbexpbuf[0]: Shm 54: create failed
    B  ***LOG BBF=> internal error in export/import buffer: object buf init fail   [dbexpbuf#4 @ 2611] [dbexpbuf2611 ]
    B  dbexpbuf: return code (sap_rc): 4
    B  Buffer 0 will not be available
    B  Unexpected returncode from db_exp_init(EXP_ATP) : 4
    B  db_objinit failed
    M  *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c  237]
    M  *** ERROR => ThIPCInit: hook failed [thxxhead.c   1656]
    M  ***LOG R19=> tskh_init, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c   1159]
    M  in_ThErrHandle: 1
    M  *** ERROR => tskh_init: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c   8437]
    M 
    M  Info for wp 0
    M 
    M    stat = 4
    M    reqtype = 1
    M    act_reqtype = -1
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = -1
    M    rq_source = 255
    M    last_tid = 0
    M    last_mode = 0
    M    rfc_req = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server bw2003_DEV_00 on host bw2003 (wp 0)
    M  *  ERROR       tskh_init: ThIPCInit
    M  *
    M  *  TIME        Sat May 18 00:29:02 2030
    M  *  RELEASE     620
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          17
    M  *  MODULE      thxxhead.c
    M  *  LINE        8569
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   672]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  237]
    M  Entering ThSetStatError
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 2328) [dpnttool.c   346]
    M  SemCleanup: Reset blocking on semaphore (Key:4/Slot:3)
    Thanks buddy
    waiting...

  • SAP ECC 6.0 EHP4 installation with ABAP+JAVA stack

    Hi,
    I need to install SAP ECC6.0 EHP4 with ABAP+JAVA stack on windiws server 2008 with oracle.
    I have read that for this, we need to install ECC 6.0 EHP4 ready and then upgrade to EHP4 using ehpi installer.
    I have found the documents seperately for ABAP and JAVA stack and not for ABAP+JAVA.
    I need clarifications on these.
    1.Do we need to install ABAP and JAVA instances seperately with EHP4 and then upgrade(In that case I have to install both instances on single host)?
    2.Should we give seperate <SID> for both instances and create seperate databases?
    3.Hard disk requirement for this set up.(We have 150 GB including C drive)
    4.Steps to perform after installing ECC6.0 EHP4 ready
    5.Please send me the doc. if anyone has
    Anyhelp would be highly appreciated.
    Regards,
    Surya

    > 1.In the installation document for EHP4 ready for SAP ERP 6.0 ABAP.It is mentioned that this installation contains only basic EHP4 for ERP 6.0 and we need to install additional EHP4  functionality in the SAP ERP 6.0 -EHP4 ready system.
    > It states that atleast Support pacakge stack (SPS) 1 of SHP4 needs to be installed.So If I install this stack using EHPi installer in the post installation activities my SAP ERP 6.0 EHP4 will be in place?Please confirm.
    Yes..
    >
    > 2.Can I install SAP SR3 with dual stack and upgaradte it directly to EHP4 at a time?
    Yes you can do it.....as SAP still supports dual stack ERP systems to EHP4
    >
    > Any solutions or suggestions from others also welcome.
    Why do u want a dual stack ECC ystem?? any specific requirement???
    Regards,
    Nirmal.K
    Edited by: nirmal konchada on Feb 2, 2011 12:16 PM

  • Problem in SAP Server installation with Oracle DB

    Hi,
    We are working in SAP Server installation with Oracle DB. After some steps in our Process it is asking for a DVD called RDBMS DVD CLIENT ORACLE. We are trying  to download in Service market place. But we could not  get the Correct DVD for the installation. Please help in this issue. Where do we get the DVD to continue our SAP Server installation.
    We are struck with our SAP Server installation. Please consider this issue as very urgent.
    thanks in advance.
    Regards,
    Mohankumar.G

    Hello Mohan,
    Please specify which installation your are doing otherwise it is difficult to provide you
    the correct path.
    For eg if you are doing NW04's installation then path will be
    downloads->entry by application group->Installations and Upgrades->SAP NetWeaver-> SAP NETWEAVER-> SAP NETWEAVER 2004S->according to OS/DB (there is oracle client cd)select the cd.
    hope it helps..
    Regards,
    Jafer

  • Delete SAP Installation with SAPMaxDB under Windows2003

    Hi,
    The SAP ID "DEC" with SAPMaxDB is now only bringing in the status Offline or Admin but not in status Online.
    Now I have a time problem.
    I will delete this SAP Instanz manuelly and after then I will start a "new" installation with the same SAP SID and DB ID (DEC). But witch entry in the Windows I must delete. I don't know.
    Thank you for your help.
    Regards
    Richard

    > The SAP ID "DEC" with SAPMaxDB is now only bringing in the status Offline or Admin but not in status Online.
    Did you try to figure why it is failing? Logs (knldiag? KnlMsg)?
    > Now I have a time problem.
    > I will delete this SAP Instanz manuelly and after then I will start a "new" installation with the same SAP SID and DB ID (DEC). But witch entry in the Windows I must delete. I don't know.
    What application is that? you can use sapinst to uninstall.
    Markus

  • SAP Installation with DB2/LINEX  ,User creation error

    Dear All,
       I have started sap installation with DB2/lLinex at the moment i am struggling in step 2:Creating user for sap system
    Error:Invalid password DIAGNOSIS .The password you specified for user db2ec1 is wrong .(CJS -20004 :Invalid password DIAGNOSIS)
    Solution:Enter the correct password .
    Please advice how to correct the issue ..
    Thanks,
    Rajmohan .s

    Hi Dinesh Sadasivan,
    While doing the sap installation please avoid using special character in password. Use the simple password like password123.
    One more thing is that also cross check the password policy from your os admin, like complexity lenth etc. If its there then tell him to temporary disable the policy.
    Regards,
    Kamal

  • Steps to install SAP 4.7 EE with MS SQL 2000: URGENT

    Hi all Basis Guru's
    We are planning to install SAP 4.7 EE with DB: MS SQL 2000 on our new IBM server, we are already running a SAP server on our OLD SERVER and we just want to install the same in the NEW IBM SERVER for which i am seeking some expert help.
    I wanted a document which can show me the steps to install SAP 4.7 and also MS SQL 2000,
    I have pdfs released by SAP which i got from service market place under instguides section, but they are not soo helpful as i am a jr consultant the termninology used by them is not in my understanding..
    So i request all, to send in a document which can easily assist me in installing SAP 4.7 and Ms SQL 2000 in step by step process
    Also is it neessary for me to install the SP3 for Ms SQL 2000.
    Reward points for sure...
    Plz do help me in this as,  this task has to be completed by 03-08-07 EOD.
    Million Thanks in Advance
    Regards
    Hari Haran.V

    Hi Juan,
    I have done all the pre-installation steps accoring to the SAP released doc from the service market place...
    but i get an error during the installation of the CI...(this is happening at the time of  <i><b>EXTRA SAP SYSTEM KERNAL ARCHIVES</b></i>)
    Here is the detailed LOG of the error.....
    INFO 2007-08-02 18:50:39
    Processing of host operation t_HostInfo_SHARED succeeded.
    INFO 2007-08-02 18:50:47
    The 'saploc' share exists at directory 'C:\usr\sap'. Choosing drive C: as SAP System drive.
    INFO 2007-08-02 18:51:13
    Successfully connected to PDPLMAIN\PDPLMAIN
    INFO 2007-08-02 18:51:13
    Executing check Product Version ...
    INFO 2007-08-02 18:51:13
    Script "Product Version" successfully executed
    INFO 2007-08-02 18:51:13
    Executing check Product Patch ...
    INFO 2007-08-02 18:51:13
    Script "Product Patch" successfully executed
    INFO 2007-08-02 18:51:13
    Executing check Product Edition ...
    INFO 2007-08-02 18:51:13
    Script "Product Edition" successfully executed
    INFO 2007-08-02 18:51:13
    Executing check Collation ...
    INFO 2007-08-02 18:51:13
    Script "Collation" successfully executed
    INFO 2007-08-02 18:51:13
    Executing check SysAdmin Rights ...
    INFO 2007-08-02 18:51:13
    Script "SysAdmin Rights" successfully executed
    INFO 2007-08-02 18:51:13
    Successfully connected to PDPLMAIN\PDPLMAIN
    INFO 2007-08-02 18:51:13
    Executing check Database existance ...
    INFO 2007-08-02 18:51:13
    Script "Database existance" successfully executed
    INFO[E] 2007-08-02 18:51:36
    Account group="pdplmain\SAP_LDAP" does not exist. <#1>
    INFO[E] 2007-08-02 18:51:37
    Account group="ORA_PD0_DBA" does not exist. <#1>
    INFO[E] 2007-08-02 18:51:37
    Account group="ORA_PD0_OPER" does not exist. <#1>
    INFO[E] 2007-08-02 18:51:49
    Account group="pdplmain\dbpd0ctl" does not exist. <#1>
    PHASE 2007-08-02 18:57:16
    SAP Web Application Server
    PHASE 2007-08-02 18:57:16
    Request common parameters of SAP System
    PHASE 2007-08-02 18:57:17
    Collecting information on database configuration
    PHASE 2007-08-02 18:57:17
    Create operating system accounts
    INFO 2007-08-02 18:57:17
    Copying file C:/SAPinst MSSQL SAPINST/keydb.xml to: C:/SAPinst MSSQL SAPINST/keydb.1.xml.
    INFO 2007-08-02 18:57:17
    Creating file C:\SAPinst MSSQL SAPINST\keydb.1.xml.
    INFO 2007-08-02 18:57:18
    Copying file C:/SAPinst MSSQL SAPINST/product.xml to: C:/SAPinst MSSQL SAPINST/product.1.xml.
    INFO 2007-08-02 18:57:18
    Creating file C:\SAPinst MSSQL SAPINST\product.1.xml.
    PHASE 2007-08-02 18:57:33
    Preparing OS account for MCOD installation
    PHASE 2007-08-02 18:57:33
    Request operating system user information
    PHASE 2007-08-02 18:57:33
    Request operating system user information
    PHASE 2007-08-02 18:57:33
    Request operating system user information
    PHASE 2007-08-02 18:57:33
    Request operating system user information
    PHASE 2007-08-02 18:57:33
    Request operating system user information
    PHASE 2007-08-02 18:57:33
    Request operating system user information
    PHASE 2007-08-02 18:57:33
    Request operating system user information
    PHASE 2007-08-02 18:57:33
    Request operating system user information
    PHASE 2007-08-02 18:57:33
    Request operating system user information
    PHASE 2007-08-02 18:57:33
    Request operating system user information
    PHASE 2007-08-02 18:57:33
    Request operating system user information
    PHASE 2007-08-02 18:57:33
    Request operating system user information
    PHASE 2007-08-02 18:57:33
    Request operating system user information
    PHASE 2007-08-02 18:57:33
    Request operating system user information
    PHASE 2007-08-02 18:57:34
    Request operating system user information
    PHASE 2007-08-02 18:57:34
    Request operating system user information
    PHASE 2007-08-02 18:57:34
    Request operating system user information
    PHASE 2007-08-02 18:57:34
    Request operating system user information
    INFO 2007-08-02 18:57:35
    Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1801674531-606747145-839522115-500' on host 'pdplmain'!
    INFO 2007-08-02 18:57:35
    Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1801674531-606747145-839522115-500' on host 'pdplmain'!
    INFO 2007-08-02 18:57:35
    Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1801674531-606747145-839522115-500' on host 'pdplmain'!
    INFO 2007-08-02 18:57:36
    Evaluating all 'tNT_RegistryEntries' table rows succeeded.
    PHASE 2007-08-02 18:57:38
    Preparing DBMS-specific environment variables
    WARNING 2007-08-02 18:57:38
    Error 1332 (No mapping between account names and security IDs was done.
    ) in execution of a 'SetEntriesInAcl' function, line (661), with parameter ().
    INFO 2007-08-02 18:57:38
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:39
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:41
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:42
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:44
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:45
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:46
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:47
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:48
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:49
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:50
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:51
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:51
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:52
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:53
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:53
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:54
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    INFO 2007-08-02 18:57:55
    Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
    PHASE 2007-08-02 18:57:55
    Adapt filesystem
    PHASE 2007-08-02 18:57:55
    Prepare check/adapt SAP instance filesystem
    INFO 2007-08-02 18:57:55
    Processing of all file system node operations of table t_SAPComponent_Filesystem_Action_SHARED succeeded.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/prfclog exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0 exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/DVEBMGS00 exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/DVEBMGS00/data exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/DVEBMGS00/data/cache exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/DVEBMGS00/exe exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/DVEBMGS00/log exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/DVEBMGS00/sec exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/DVEBMGS00/work exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/SYS exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/SYS/exe exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/SYS/exe/opt exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/SYS/exe/dbg exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/SYS/exe/run exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/SYS/gen exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/SYS/gen/dbg exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/SYS/gen/opt exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/SYS/global exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/SYS/profile exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/PD0/SYS/src exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap/tmp exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap\trans exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap\trans/tmp exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap\trans/EPS exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap\trans/EPS/in exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap\trans/EPS/out exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap\trans/EPS/log exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap\trans/bin exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap\trans/buffer exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap\trans/cofiles exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap\trans/data exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap\trans/etc exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap\trans/log exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    File system node C:\usr\sap\trans/sapnames exists already. Nothing to do.
    INFO 2007-08-02 18:57:56
    Copying file H:/sapinst_mssql/NT/I386/UNINSAP.EXE to: C:\usr\sap\PD0\SYS\exe\run\..\UNINSTSAP.EXE.
    INFO 2007-08-02 18:57:56
    Copying file system node H:/sapinst_mssql\NT\I386\UNINSAP.EXE with type NODE to C:\usr\sap\PD0\SYS\exe\run\..\UNINSTSAP.EXE succeeded.
    INFO 2007-08-02 18:57:56
    Processing of all file system node operations of table t_SAPComponent_Filesystem_Action_SHARED succeeded.
    INFO 2007-08-02 18:57:57
    Processing of all file system node operations of table t_SAPComponent_Filesystem_Action_SHARED succeeded.
    INFO 2007-08-02 18:57:58
    Creating of all NT shares while processing the table 'tNT_SHARE' succeeded.
    INFO 2007-08-02 18:57:58
    Creating of all NT shares while processing the table 'tNT_SHARE' succeeded.
    WARNING 2007-08-02 18:57:59
    The specified service does not exist as an installed service.
    ! Error in execution of a 'OpenService' function, line (286), with parameter(s) (SAPPD0_00).
    WARNING 2007-08-02 18:57:59
    The specified service does not exist as an installed service.
    ! Error in execution of a 'OpenService' function, line (286), with parameter(s) (SAPOsCol).
    PHASE 2007-08-02 18:57:59
    Extract archives
    INFO 2007-08-02 18:58:00
    Processing of all file system node operations of table t_SAPComponent_Archives_FORMS_SHARED succeeded.
    PHASE 2007-08-02 18:58:01
    Extract SAP System kernel archives
    INFO 2007-08-02 18:58:01
    Creating file C:\SAPinst MSSQL SAPINST\SAPEXE.SAR.log.
    ERROR 2007-08-02 18:58:01
    MOS-01021  PROBLEM: .\sapcar.exe -xvgf H:\SAP_KERNEL_MSSQL_IA64/NT/I386/SAPEXE.SAR, -R C:\usr\sap\PD0\SYS\exe\run returned with '29'. CAUSE: See output './SAPEXE.SAR.log'. SOLUTION: Solve the CAUSE and retry.
    ERROR 2007-08-02 18:58:01
    FJS-00012  Error when executing script.
    Waiting to hear from at the earliest
    Regards
    Hari haran.v

  • Diagnostics Agent Installation in MCOD enabled systems

    Hi Experts,
    We are connecting MCOD anabled managed systems to Solution Mamager 7.1 SPS10.
    But little confused with Dagnostics agent strategy; whether Agent-On-the-fly feature can be used in this case or not?
    I am following SAP Note 1365123 - Installation of Diagnostics Agents.
    Our MCOD structure is as below:
    All Development systems on one physical host
    All Quality systems on one physical host and
    no MCOD enabled for Productive systems.
    Thanks in advance,
    Rahul

    Hi Alexander,
    Thank you for the quick reply. Can you clarify below:
    MCOD database host is having 3 DB instances (of development systems) and all the 3 instances are connecting to single solution Manager system.
    Does each DB instance require seperate Diag. agent or single Diag. agent will work for all the 3 instance to connect with solution manager?
    Thanks in advance,
    Regards,
    Rahul

  • SAP Ecc6.0 Installation error during ABAP Import Phase 20 of 24

    While I am installing SAP ECC 6.0 with Original DVD. I am getting some Issues.
    I had finished upto 4 stpes .  and after that IMPORT ABAP, showing error in " Log files are written to C: Program files:sapinst......"
    Please Retry , View Log & Stop.
    I am clicking Retry again it will be come same issue. Please Let me know.
    Log Files Name - "ABAP Processors of Instances SID\DVEMGS00"

    Still I am getting same problem in mine SAP ECC6.0 Installation.
    In Abap Instance Phase 20 of 24.  Error in ABAP Instance. I check the mmc.
    Disp+work is in Gray Color. Remainiing Server Green Color. After Few minutes it will stopped in Work Process.
    Still Going Installation for same Process.
    Let me know.

  • SAP SRM 7.0 with ECC EHP 4 components to execute scenario

    Hi All,
    I am new to SAP SRM 7.0.Could you please let me know that what are all the components needs to be in place to execute the technical scenarios and business scenarios.I had an hands on experience on SAP SRM 5.0 with ECC 6.0 backend.
    Some where i read that there are lot of configuration  changes when we integrate SRM 7 with ECC EHP 4.Do we need to have PI 7  for executing Centralized contract and plan driven procurement scenario?Please guide me to have some exposure towards higher version.Thank you in advance.
    Best Regards,
    praveen

    Hello,
    You can refer the INSTALLATION AND UPGRADE INFORMATION , Master guides etc maintained at the below mentioned location which will answer all your query's here.
    Goto URL http://service.sap.com/srm-inst and then navigate to SAP SRM --> SAP SRM Server 7.0 .
    Best Regards,
    Rahul

  • Install SAP ERP 6.0 with EHP7 - Inst Master ???

    Hi All,
             I've downloaded all necessary files need for EHP7 FOR SAP ERP 6.0 IDES Version.
    The downloaded files are listed below.
    NW 7.0 Presentation - 7.30 Compilation 3
    NW 7.0 Presentation - Adobe LiveCycle Designer 9.0
    RDBMS MSSQLSRV 2012 SP01 CU7 1/8
    RDBMS MSSQLSRV 2012 SP01 CU7 2/8
    RDBMS MSSQLSRV 2012 SP01 CU7 3/8
    RDBMS MSSQLSRV 2012 SP01 CU7 4/8
    RDBMS MSSQLSRV 2012 SP01 CU7 5/8
    RDBMS MSSQLSRV 2012 SP01 CU7 6/8
    RDBMS MSSQLSRV 2012 SP01 CU7 7/8
    RDBMS MSSQLSRV 2012 SP01 CU7 8/8
    SAP Kernel 7.41 Windows Server on x64 64bit
    IDES SAP ERP 6.0 EHP7 Inst. Export 1/14
    IDES SAP ERP 6.0 EHP7 Inst. Export 2/14
    IDES SAP ERP 6.0 EHP7 Inst. Export 3/14
    IDES SAP ERP 6.0 EHP7 Inst. Export 4/14
    IDES SAP ERP 6.0 EHP7 Inst. Export 5/14
    IDES SAP ERP 6.0 EHP7 Inst. Export 6/14
    IDES SAP ERP 6.0 EHP7 Inst. Export 7/14
    IDES SAP ERP 6.0 EHP7 Inst. Export 8/14
    IDES SAP ERP 6.0 EHP7 Inst. Export 9/14
    IDES SAP ERP 6.0 EHP7 Inst. Export 10/14
    IDES SAP ERP 6.0 EHP7 Inst. Export 11/14
    IDES SAP ERP 6.0 EHP7 Inst. Export 12/14
    IDES SAP ERP 6.0 EHP7 Inst. Export 13/14
    IDES SAP ERP 6.0 EHP7 Inst. Export 14/14
    I don't find Inst.Master which is required to start up the installation. Where to download it and what specific version I need to download for EHP7 for SAP ERP 6.0 IDES ?
    Are there any JAVA COMPONENTS that I need to download before starting installation like Java Component BS2005SR3 or Java Component NW 7.0 SR3 ?? and SAP ERP 6.0 SR3 Components for EHP3 do we have similar components for EHP7 ?
    Can anyone tell me what type of collation I need to select when installing the MSSQL Server 2012 and which Operating system is best suitable for SAP IDES 6.0 with EHP7 on MSSQL Server 2012 ?
    I have JAVA from Oracle version 1.4.2 and policy file or whcih version of JAVA is suitable for installation ? Is it possible to do the install with latest JRE available ?
    Will appreciate rewards for best support.
    Regards,
    Gowri Shankar

    Hi Tomas,
    Good day, as per you advice. I manage to go thru the IDES installation but its stuck on 19 of 34 (Import ABAP) with error code 2.
    Below are the text written in ECC Message Box.
    An error occurred while processing option SAP Business Suite 7i 2013 Support Release 1 > EHP7 for SAP ERP 6.0 ABAP Support Release 1 > Oracle > SAP Systems > Application Server ABAP > Standard System > Standard System( Last error reported by the step: Process call 'D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.). You can now:
    Choose Retry
    to repeat the current step.
    Choose Log Files
    to get more information about the error.
    Stop the option and continue later.
    Log files are written to C:\Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP.
    Below are the logs from R3load.exe:-
    sapparam: sapargv(argc, argv) has not been called!
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20141006062234
    D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/741_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
    D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: version R7.40/V1.8 [UNICODE]
    Compiled Nov 23 2013 13:31:32
    -------------------- Start of patch information ------------------------
    patchinfo (patches.h): (0.009) Support for SUM/ZDM and DMO (note 1778564)
    DBSL patchinfo (patches.h): (0.011) DBSL error corrections in 7.41: (4) LOBs (note 1928526)
    --------------------- End of patch information -------------------------
    process id 4612
    DbSl Trace: Connect via SAPUSER not supported for kernel >= 740.
    (DB) ERROR: db_connect rc = 256
    DbSl Trace: Connect via SAPUSER not supported for kernel >= 740.
    (DB) ERROR: DbSlErrorMsg rc = 29
    D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
    D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20141006062234
    I've created new thread for this issue at Error in SAP installation in phase 19 of 34 - Import ABAP
    Looking forward for your reply.
    Regards,
    Jay
    -96-
    Message was edited by: Jay Jay

  • Error during sap r/3 installation  at update databse statistics

    Hi friends,
    I am getting an error during sap r/3 installation almost at the last stage.
    the error is  at update database statistics.
    my configuration is
    os: windows 2000 server.
    d/b: oracle 9i.
    erp: sap 4.7 ee
    During oracle installation stage the oui is asking for create a database, i am chechking it ok. Is that a problem ?.
    I am sending the log file. Please can anybody help me, where i am going wrong-
    The log file----
    Click Browse and give location of export1, as shown in the bellow figure
    INFO 2007-02-04 21:46:32
    Creating directory D:\oracle\DRS\sapdata4\drs620_5.
    INFO 2007-02-04 21:46:32
    Creating file system node D:\oracle\DRS/sapdata4\drs620_5 with type DIRECTORY succeeded.
    INFO 2007-02-04 21:46:32
    Creating directory D:\oracle\DRS\sapdata5\drs620_6.
    INFO 2007-02-04 21:46:32
    Creating file system node D:\oracle\DRS/sapdata5\drs620_6 with type DIRECTORY succeeded.
    INFO 2007-02-04 21:46:32
    Creating directory D:\oracle\DRS\sapdata5\drs620_7.
    INFO 2007-02-04 21:46:32
    Creating file system node D:\oracle\DRS/sapdata5\drs620_7 with type DIRECTORY succeeded.
    INFO 2007-02-04 21:46:32
    Creating directory D:\oracle\DRS\sapdata6\drs620_8.
    INFO 2007-02-04 21:46:32
    Creating file system node D:\oracle\DRS/sapdata6\drs620_8 with type DIRECTORY succeeded.
    INFO 2007-02-04 21:46:32
    Creating directory D:\oracle\DRS\sapdata6\drs620_9.
    INFO 2007-02-04 21:46:32
    Creating file system node D:\oracle\DRS/sapdata6\drs620_9 with type DIRECTORY succeeded.
    INFO 2007-02-04 21:46:32
    Creating directory D:\oracle\DRS\sapdata6\drsusr_1.
    INFO 2007-02-04 21:46:32
    Creating file system node D:\oracle\DRS/sapdata6\drsusr_1 with type DIRECTORY succeeded.
    INFO 2007-02-04 21:46:32
    Creating directory D:\oracle\DRS\sapdata2\roll_1.
    INFO 2007-02-04 21:46:32
    Creating file system node D:\oracle\DRS/sapdata2\roll_1 with type DIRECTORY succeeded.
    INFO 2007-02-04 21:46:32
    Creating directory D:\oracle\DRS\sapdata3\temp_1.
    INFO 2007-02-04 21:46:32
    Creating file system node D:\oracle\DRS/sapdata3\temp_1 with type DIRECTORY succeeded.
    INFO 2007-02-04 21:46:32
    Creating directory D:\oracle\DRS\sapdata1\system_1.
    INFO 2007-02-04 21:46:32
    Creating file system node D:\oracle\DRS/sapdata1\system_1 with type DIRECTORY succeeded.
    INFO 2007-02-04 21:46:32
    Processing of all file system node operations of table tORA_SapdataNodes succeeded.
    INFO 2007-02-04 21:46:33
    Processing of all file system node operations of table tORA_DatabaseServerNodes succeeded.
    INFO 2007-02-04 21:46:34
    Processing of all file system node operations of table tORA_SapdataNodes succeeded.
    INFO 2007-02-04 21:46:35
    Creating file c:\oracle\ora90\database\initDRS.ora.
    INFO 2007-02-04 21:46:36
    Creating file C:\oracle\ora90\database\initDRS.sap.
    INFO 2007-02-04 21:46:37
    Copying file F:/sap4.7/ker/NT/COMMON/INSTALL/INITSID.DBA to: c:\oracle\ora90/database/initDRS.dba.
    INFO 2007-02-04 21:46:37
    Creating file c:\oracle\ora90\database\initDRS.dba.
    INFO 2007-02-04 21:46:38
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 21:46:39
    Moving file c:/oracle/ora90/database/initDRS.ora to: orig_init_ora_tmp.txt.
    INFO 2007-02-04 21:46:39
    Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: c:\oracle\ora90\database\initDRS.ora.
    INFO 2007-02-04 21:46:39
    Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
    INFO 2007-02-04 21:46:40
    Creating file C:\SAPinst ORACLE KERNEL\oradim.log.
    INFO 2007-02-04 21:46:45
    See 'c:\oracle\ora90/bin/oradim -new -sid DRS -STARTMODE auto' output in 'C:\SAPinst ORACLE KERNEL\oradim.log'.
    INFO 2007-02-04 21:46:45
    'c:\oracle\ora90/bin/oradim -new -sid DRS -STARTMODE auto' returned with '0'.
    INFO 2007-02-04 21:46:46
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 21:46:49
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 21:59:57
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:00:00
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:00:44
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:00:46
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:01:31
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:01:34
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:02:18
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:02:20
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:03:06
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:03:09
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:03:55
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:03:57
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:04:44
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:04:46
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:05:32
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:05:35
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:06:21
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:06:23
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:07:10
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:07:12
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:07:58
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:08:01
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:08:48
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:08:50
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:09:38
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:09:40
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:09:44
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:09:46
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:10:06
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:10:09
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:10:39
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:10:41
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:10:44
    Moving file c:/oracle/ora90/database/initDRS.ora to: orig_init_ora_tmp.txt.
    INFO 2007-02-04 22:10:44
    Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: c:\oracle\ora90\database\initDRS.ora.
    INFO 2007-02-04 22:10:44
    Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
    INFO 2007-02-04 22:10:45
    Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
    INFO 2007-02-04 22:10:46
    See 'c:\oracle\ora90/bin/lsnrctl stat' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
    INFO 2007-02-04 22:10:46
    'c:\oracle\ora90/bin/lsnrctl stat' returned with '3'.
    INFO 2007-02-04 22:10:46
    Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
    INFO 2007-02-04 22:10:48
    See 'c:\oracle\ora90/bin/lsnrctl start' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
    INFO 2007-02-04 22:10:48
    'c:\oracle\ora90/bin/lsnrctl start' returned with '0'.
    INFO 2007-02-04 22:10:48
    Copying file F:/sap4.7/ker/NT/COMMON/INSTALL/ORADBUSR.SQL to: ./oradbusr.sql.
    INFO 2007-02-04 22:10:48
    Creating file C:\SAPinst ORACLE KERNEL\oradbusr.sql.
    INFO 2007-02-04 22:10:49
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:10:52
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    PHASE 2007-02-04 22:10:54
    Database Load
    INFO 2007-02-04 22:10:58
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:10:59
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:11:00
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:11:01
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:11:01
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:11:01
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:11:01
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:11:01
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:11:01
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:11:01
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:11:01
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:11:01
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:11:01
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:11:01
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:11:01
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:11:02
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:11:02
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:11:02
    Task files created
    INFO 2007-02-04 22:11:03
    Command files created
    INFO 2007-02-04 22:11:05
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:11:05
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-04 22:11:05
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-05 00:06:44
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-05 03:43:19
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-05 04:55:23
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-05 05:17:24
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-05 05:39:25
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-05 05:45:25
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-05 05:57:26
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-05 06:00:26
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-05 06:03:26
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-05 06:05:26
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-05 06:07:26
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-05 06:08:27
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-05 06:09:28
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-05 06:24:46
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-05 06:24:46
    Processes finished successfully
    INFO 2007-02-05 06:26:23
    Creating file C:\SAPinst ORACLE KERNEL\ddicora.sql.
    INFO 2007-02-05 06:26:25
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-05 06:26:30
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-05 06:26:32
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-05 06:26:43
    Moving file c:/oracle/ora90/database/initDRS.ora to: orig_init_ora_tmp.txt.
    INFO 2007-02-05 06:26:43
    Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: c:\oracle\ora90\database\initDRS.ora.
    INFO 2007-02-05 06:26:43
    Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
    INFO 2007-02-05 06:26:43
    Moving file c:/oracle/ora90/database/initDRS.ora to: orig_init_ora_tmp.txt.
    INFO 2007-02-05 06:26:43
    Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: c:\oracle\ora90\database\initDRS.ora.
    INFO 2007-02-05 06:26:43
    Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
    INFO 2007-02-05 06:26:43
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-05 06:26:45
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-05 06:26:48
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-05 06:26:52
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-05 06:26:55
    Creating file C:\SAPinst ORACLE KERNEL\brconnect.log.
    INFO 2007-02-05 06:26:55
    Changed working directory to C:\SAPinst ORACLE KERNEL.
    INFO 2007-02-05 06:26:55
    See 'D:\usr\sap\DRS\SYS\exe\run/brconnect -c -f crsyn -o SAPDRS' output in 'C:\SAPinst ORACLE KERNEL\brconnect.log'.
    ERROR 2007-02-05 06:26:55
    MOS-01012  PROBLEM: 'D:\usr\sap\DRS\SYS\exe\run/brconnect -c -f crsyn -o SAPDRS' returned with '128' which is not a defined as a success code.
    ERROR 2007-02-05 06:26:55
    FJS-00012  Error when executing script.
    kindly help me where i am going wrong.
    Yours friendly,
    Bharath.

    Hi Andreas,
    many thanks to you for the timely help.
    a.)I want to know why there is an error at brconnect ? why is it returning an error code (128) at UPDATE DATABASE STATISTICS stage.
    I have read in this forum itself that the UPDATE STATISTICS need not be suceesfully completed and we can edit database.r3s
    " ..on the other hand you can easily invoke the update statistics after the installation has ended (succesfully!)...edit DATABASE.R3S (or the appropriate template file you are using) by changing the status=ERROR to status=OK...this will let you finish the installation..-GreetZ, AH."
    I have searched for this file (database.r3s) in my system in vain Where can i find this file database.r3s?.
    Have i done any configuration mistake at the pre-installation stage. I have installed Oracle 9.0 using setup.exe of oracle. should i use sapserver.cmd to install oracle?.I havent applied any patch for Oracle 9.0
    Should I apply any patch just the same way we do for Oracle 8.1.x ?.  If so, where can i get the patch for Oracle 9.0 .?.
    b.) You said there should not be any spaces in file path (ex: C:/SAPinst ORACLE KERNEL/) . But I havent specified file path, the r/3 setup itself has created the directory path.
    c.) I want to know one thing- should we create a database before installing r/3. When we are installing Oracle 8/9. x what are the components that we are installing?
    Your friend,
    Bharath.

Maybe you are looking for