SAP BPC NW 10 - Restore InfoArea /CPMB/ENVIRONMENTSHELL

Hello Experts,
We are facing a problem with Environmentshell and in order to try to resolve it I've followed note 1858372 - Failed to activate ENVIRONMENTSHELL - BPC 10NW .
The problem is that now I don't have InfoArea /CPMB/ENVIRONMENTSHELL created and so I have all the infobjects under "not assigned" node.
How can I have infoarea /CPMB/ENVIRONMENTSHELL created again? I have run program UJS_ACTIVATE_CONTENT with success but nothing happened.
Can you help me?
Thanks,
Nadine

Hello Jeff,
Please see the mesage after executing the program:
It means it worked ok, is that correct?
Thanks,
Nadine

Similar Messages

SAP BPC 7 APPSet Restore SQL 2005

Hi Everyone,
I have SAP BPC 7 setup in a multi-server environment, and it's working well. I created a dev environment, installed SAP in the same fashion, and now when I try to restore an app set through server manager in dev, it keeps putting the SQL DB on C instead of where it should go on I:\ .
The original app set was using this same drive configuration, and that backup/restore works fine -
I've gotten this to work before, but I can't seem to get the restore to go somewhere else this time...
Any thoughts appreciated -
Edward

Hi,
More testing today so let's share
There is 3 registry key in SQL Server 2005 :
HKLM\SOFTWARE\Microsoft\Microsoft SQL Server\<Instance Name>\MSSQLServer\DefaultData
HKLM\SOFTWARE\Microsoft\Microsoft SQL Server\<Instance Name>\MSSQLServer\DefaultLog
HKLM\SOFTWARE\Microsoft\Microsoft SQL Server\<Instance Name>\Setup\SQLDataRoot
Key #1 and key #2 are the one you configure in SQL server Manager and they correspond to the *.MDF directory and *.LDF directory.
Key #3 is the one you configure during SQL Server installation.
SAP Server manager will use key #3 when you restore an appset and also during the installation process of the ApShell.
Key #1 and Key #2 are used by BPC setup to create the AppServer database.
So to conclude : Even if you change Key #3 value in order to change the directory where you want to create your DB files, you will not be able to put *.MDF files on a different folder (directory) thant *.LDF files. Which means that after each AppSet restoration you will have to manually move at least the *.LDF or *.MDF file. I think this can be scripted with a T-SQL command... But you will have to do it.
On a side note, i tried to delete Key #3 (was hoping that it will use key #1 and #2) => This is not working. The AppSet restore will fail (in fact this is SQL Server who will throw an error).
Will ask my customer to open a case on SAP support, maybe it could be "fixed" one day.

Restore the components as they were before in a Migration (SAP BPC) - DOC

Hello,
I am going to do a Migration from Outlooksoft 5.0 SP2 to a SAP BPC 5.1 SP6 in a productive instance (Cluster system) with 2 front-end & 2 back-ends and I wan to know if someone knows is there a way to do a good backup incase it turns out to be a failure in the migration, I want to have a restore document incase.
Does someone has this document. Does SAP has this document to restore the components as they were before?
Best regards...
Pablo Mortera.

HI Pablo,
Actually you are not performing a migration you are performing an upgrade.
You have to do backup of your appset.
You have to upgrade just one application server and to shut down the second and to see if it is working find everything after the upgrade.
If it is not then you have tu uninstall this server and to install again the old version 5.0.
Restore the appset and you will have again the system up and running with old version.
Regards
Sorin

Upgrade to SAP BPC 7.0 with cluster system (Front-End & Back-End)

Hello,
I have to do an upgrade document about an outlooksoft 5.0 SP2 to SAP BPC 7.0 SP4 in a cluster system.
It has 2 front-ends (IIS cluster windows) & 2 back-ends (SQL Cluster).
We are going to do first the migration in 1 node, and then in another. The first upgrade in the first node I understand. I uninstall outlookdoft 5.0, install SAP BPC 7.0 SP4 and then restore the backup of the Appset, and do the posts upgrade action of the Dimension TIME.
But in the second, what do we do??? I uninstall outlookdoft 5.0, install SAP BPC 7.0 SP4 and then what??? Do I have to restore the backup of the Appset again???
I need help.
Best regards.
Pablo Mortera.

Hello,
On the second cluster node, you have only to install the software, nothing related to the appset. If you alreay run the migration stepts for the appset, all the information are into daatbase and file server.
However, the normal behaviour is to make the installation on the both nodes, make the basic tests to validate the installation and then proceed with the appset migration.
Best regards,
Mihaela

Transport Control in SAP BPC 7.0 M

Hi,
We are an IT company with more than 250 reporting units. We intend to implement SAP BPC 7.0 M in our organisation to unify our forecating and reporting process across reporting units. I gather that there is no transport tool available in BPC to transport from development to quality to production. I am curious to know if SAP has provided a best practice for controlling changes to production. What is the best method to ensure that an administrator or a developer does not incorrectly make changes in the production system?
Also how do we convince our internal infra guys that changes have to be made directly in production? We have a central team for remote hosting all our systems and they have raised some following questions related to the security/disaster recovery aspects.
a. What is the backup and recovery procedure in case something happens to the production system.
b. Is there a best practice that I could refer to with respect to transports to convince them.
I am trying to prepare a document to convince them. I have got come inputs from sdn but I would really like an authoritative source to better understand this. Any answers/help would be highly appreciated!
Rgds
Shivram.

Hi Shivram,
for diaster recovery, you can just use the backup/restore functionality in BPC server manager. Where an admin can schedule it. Even you can use the SQL backup functionality, but if you use this you need to manually backup the fileshare folder.
Regarding Transports, yes when the project is already in production, it is a bit dangerous to use the backup/restore functionality as we will loss the production system data. So need to use the dev/QA system to develop and test it and later do the changes manually in production system. Before take a backup of production system, then you will be safe.
regards,
Sreedhar

SAP BPC 7.5: Master Data and Hierachiy Load from InfoObject

Hallo Forum Participants,
I am going to load Master Data from a "Clarity" Reporting Tool in BW to SAP BPC 7.5 via Process Chains (/CPMB/IMPORT_IOBJ_MASTER, /CPMB/IMPORT_IOBJ_HIER) delivered from SAP.
These Process Chains load the Master Data and Hierarchies from an InfoObject. To find out more about Ticking of BPC I have performed a following test. So, on BPC Admin Interface I have duplicated the Dimension u201CAu201D and called it as Dimension u201CBu201D (in BW site InfoObject u201CAu201D and u201CBu201D). In the Member Sheet of Dimension u201CBu201D I have implemented the several changes und tried to load Master Data from BW namely from infoObject u201CBu201D into BPC Dimension u201CAu201D. Therefor I created a transformation file and mapped one for one IDu2019s. The data Manager started these chains, but resulted nothing (Status: red X).
What are the features of BPC InfoObjects in Comparision with regular InfoObject?
How can I load Hierarchies into InfoObject?
What else I must take into account?
Why does not work this simple test?
Regards.
Alisher
Edited by: Alisher Babaev on Jan 6, 2012 1:59 PM

Hallo pkrishna,
so it is successed with master data load, but without hierachiies.
My Master Data Properties on Dimension Sheet are:
-ID
-EVDESCRIPTION
-PARENTH1
-CURRENCY
I have mapped as below:
ID=ID
CURRENCY=/CPMB/CURR
/CPMB/CURR- my technical id in BW.
In the Note you advised transformation file has been mapped like below:
-NODENAME=NODENAME
-HIER_NAME=HIER_NAME
-PARENT=PARENT
-ORDER=ORDER
After executing of package i get whether rejected list or log file. No data can be retirieved from InfoObject.
Have you any Idea?
regards

Error when creating a business activity in SAP BPC 10.1

Hi Experts,
I am failing to save a new business activity in SAP BPC 10.1 when setting up a new business process flow. I can validate the the activity successfully, however when I try to save the activity i receive the following message " Saving the workspace failed because of a missing root folder; contact your system administrator"
Please can anyone help me with why I am receiving this message?
Thanks so much

Hi Kudzai,
The error you're getting in BPC 10.1 is because the environments were migrated from BPC 10.0 or older version using transaction UJBR and it was not migrated to 10.1 after the restore.
SAP Note 2052538 provides resolution for this. Please follow the instructions of Upgrade Guide for BPC NW 10.1:
Execute migration program UJT_MIGRATE_100_TO_101 to migrate 10.0 data to 10.1 if the restored environment was backed up from a BPC NW 10.0 system
Execute migration program UJT_MIGRATE_75_TO_101 to migrate 7.5 data to 10.1 if the restored environment was backed up from a BPC NW 7.5 system
Thanks
Rajesh

Enabling Journals in a Model in SAP BPC 10.0 MS

Hi,
Where does one enable journals functionality in SAP BPC 10.0 MS?
Here's the background:
I created a new Environment from EnvironmentShell
Worked on dimensions, member sheets etc. in the Consolidation Model
In the SAP Web Administration, Consolidation Monitor, I get the error Initialization Failed when clicking on the Journal item in the TreeView on the left. Clicking on the See Details, I get the error JOURNAL_NOT_ENABLED.
In the Planning and Consolidation Administration Client, I get a similar error when clicking on Define Journal Validation Rules or Define Journal Translation Rules. (Journal in not enabled in Consolidation)
I then thought I would be clever and modified the column 'Journal' in the table dbo.tblApp by putting a '1' there.
Refreshing the Planning and Consolidation Administration Client, I see that for the Consolidation Model, the Journals are specified as 'in use'. However, returning to the SAP Web Administration and clicking on the Journal option, the error I now get is 'Invalid object name dbo.jrnAddedItems', probably because my backdoor hack circumvented some code.
Where does one enable journals in a Model on the MS 10.0 platform? For the life of me, I can't find it. This despite much searching. Clearly I am missing something obvious.
Kind Regards
Nick

Hi Arnold,
Thanks. Yip, that's it. (I knew I was missing something remarkably obvious - it's just that I could not find it for some strange reason.)
Again, many thanks.
Kind Regards
Nick

MDX Statement error in sap bpc 10.1 admin when opening a report

I have restored a previously created environment that was built on the sap bpc 10.1 platform and am receiving the following errors when accessing my reports and clicking refresh. I also received an error when restoring the environment that says "Error occurred in expanding member formula". I don't believe these would be related but I am unable to access the member formulas in the model. I am however able to access all dimensions, etc. I am not able to create any new reports though. Any ideas on a solution.

Hi Kudzai,
The error you're getting in BPC 10.1 is because the environments were migrated from BPC 10.0 or older version using transaction UJBR and it was not migrated to 10.1 after the restore.
SAP Note 2052538 provides resolution for this. Please follow the instructions of Upgrade Guide for BPC NW 10.1:
Execute migration program UJT_MIGRATE_100_TO_101 to migrate 10.0 data to 10.1 if the restored environment was backed up from a BPC NW 10.0 system
Execute migration program UJT_MIGRATE_75_TO_101 to migrate 7.5 data to 10.1 if the restored environment was backed up from a BPC NW 7.5 system
Thanks
Rajesh

Send parameter from one script logic to another. SAP BPC 7.5 NW.

Hello!
Before i start, want to apologize for my English.
We work on SAP BPC 7.5 for NetWeaver.
In general, we want to send parameter from one Script logic file to another script logic file.
I will explain why :
1. We have parametr like %C_CATEGORY_SET% (and another four parameter, like groups, currency and etc.) that work on one script(next, i will named it A_Script).
       We will send this parametr from BPC EXCEL (we will create button, then use command MNU_eData_SelectPackage(we also set parameters) and run package that we need, also before we set script for this package by the SAP Guide. We send some data, and this A_Script work good. Everything that we want from this script work correctly. )
2. Next we create another script(B_Script) , and we want use %C_CATEGORY_SET%, but we don't know how use this parametr, if we will just write this parametr on Script Logic, apears error ("C_CATEGORYDATAVALUE" is not assigned to the Data Administrator). We try to solve this problem by using System_Constants.lgf, but we get error.
Code:
*DIM C_CATEGORY          WHAT=%C_CATEGORY_SET%;             WHERE=<<<;                   USING=<<<;    TOTAL=<<<
*DIM C_ENTITY                 WHAT=%ENTITYSET%;                         WHERE=<<<;                  USING=<<<;      TOTAL=<<<
*DIM GROUPS                   WHAT=%GROUPS_SET%;                    WHERE=<<<;                  USING=<<<;     TOTAL=<<<
*DIM RPTCURRENCY         WHAT=%RPTCURRENCY_SET%;         WHERE=<<<;                  USING=<<<;      TOTAL=<<<
*DIM TIME                          WHAT=%TIME_SET%;                          WHERE=<<<;                  USING=<<<;     TOTAL=<<<
If we will change %C_CATEGORY_SET% for ACTUAL, and also change another parameters, script will work, package will run correctly. But we need using parameters, because we didn't exactly what will choose our client.
Our question have BPC Script Logic some kind of Globar Parameter(Variable), that we will set in A_Script, and then use them on B_Script?
How can we define parameter from another script logic, maybe we should send it?
Should we use System_Constants for solving this problem, if yes, how?
Any help will be appreciated
Best Regards,
Erlan Kadraliev
Edited by: Erlan Kadraliev on Feb 8, 2011 4:50 PM
Edited by: Erlan Kadraliev on Feb 8, 2011 4:58 PM
Edited by: Erlan Kadraliev on Feb 8, 2011 4:59 PM

Hi Ethan Jewett
1. About %ENTITYSET% it is normal. Before this line i write :
*SELECT(%ENTITYSET%, "ENTITY", GROUPS, "[ID]=%GROUPS_SET%")
So it is not this problem. %ENTITYSET% just parameter, that i used.
2. Are you running the scripts using the same data manager package? I am running two different package for 2 different Script.
For example aPackage for aScript, and bPackage for bScript.
My questions was how can i send parametr from one script to another, for example i can run another script by using BADi command Runlogic, but how can send parameter that i need to used on another script. I have for example parameter %GROUPS_SET% (CG001) on aScript, but i can't get this parameter on another script, if i write %GROUPS_SET% i will get error ("GROUPSDATAVALUE" is not assigned to the Data Administrator)
OR
Maybe if you will answer for next question, i will be able solve problem , How can i send parameter CG001 (this is %GROUPS_SET%, for example it stay in EXCEL in cell A5) from excel to script logic by running package. Maybe i can get cell value on Dynamic Script Data Management?
My Dynamic Script on bPackage
PROMPT(RADIOBUTTON,%CHECKLCK%,"u0412u044Bu0431u043Eu0440 u0431u0430u0437u043Eu0432u043Eu0433u043E u043Fu043Eu043Au0430u0437u0430u0442u0435u043Bu044F.",1,{"u0412u0441u0435u0433u043E u0410u043Au0442u0438u0432u044B","u0421u043Eu0431u0441u0442u0432u0435u043Du043Du044Bu0439 u043Au0430u043Fu0438u0442u0430u043B","u0412u044Bu0440u0443u0447u043Au0430 u043Eu0442 u0440u0435u0430u043Bu0438u0437u0430u0446u0438u0438","u0414u043Eu0445u043Eu0434 u0434u043E u043Du0430u043Bu043Eu0433u043Eu0431u043Bu0430u0436u0435u043Du0438u044F u043Eu0442 u043Fu0440u043Eu0434u043Eu043Bu0436u0430u044Eu0449u0435u0439 u0434u0435u044Fu0442u0435u043Bu044Cu043Du043Eu0441u0442u0438"},{"BPAST_ALL","BPEQ","BPPROCE","BPOPIN_GO"})
INFO
(%EQU%,=)
INFO
(%TAB%,;)
TASK
(/CPMB/DEFAULT_FORMULAS_LOGIC,SUSER,%USER%)
TASK
(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPPSET,%APPSET%)
TASK
(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPP,%APP%)
TASK
(/CPMB/DEFAULT_FORMULAS_LOGIC,REPLACEPARAM,CHECKLCK%EQU%%CHECKLCK%%TAB%)
TASK
(/CPMB/DEFAULT_FORMULAS_LOGIC,LOGICFILENAME,MYTEST_145.LGF)
Best Regards,
Kadraliev Erlan

Data Manager Package Error in SAP BPC 10

Hi All,
I am getting below error message while running the Data manager package /CPMB/LOAD_INFOPROVIDER in SAP BPC 10. Screenshot is attached for your reference. Please help in solving this issue.
Thanks & Regards,
Ramesh.

Hi Vadim,
Please find the Advanced DM Script of Copy Package.
PROMPT(RADIOBUTTON,%TARGETMODE%,"Handling of records",0,{"Copy records with match key","Copy by replacing data in same data region of Entity, Category, Time and Audit ID"},{"0","2"})
PROMPT(RADIOBUTTON,%CHECKLCK%,"Select whether to check work status settings when importing data.",1,{"Yes, check for work status settings before importing","No, do not check work status settings"},{"1","0"})
PROMPT(COPYMOVEINPUT,%SELECTION%,%TOSELECTION%,"Select the members to COPY and where to",%DIMS%,0)
INFO(%TEMPNO1%,%INCREASENO%)
INFO(%ACTNO%,%INCREASENO%)
TASK(/CPMB/CM_CONVERT,OUTPUTNO,%TEMPNO1%)
TASK(/CPMB/CM_CONVERT,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/CM_CONVERT,SAPPSET,%APPSET%)
TASK(/CPMB/CM_CONVERT,SAPP,%APP%)
TASK(/CPMB/CM_CONVERT,SELECTION,%SELECTION%)
TASK(/CPMB/CM_CONVERT,TOSELECTION,%TOSELECTION%)
TASK(/CPMB/CM_CONVERT,KEYDATE,%SELECTION_KEYDATE%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,CHECKLCK,%CHECKLCK%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,SELECTION,%TOSELECTION%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,KEYDATE,%SELECTION_KEYDATE%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,DUMPLOADMODE,3)
TASK(/CPMB/APPEND_LOAD,PREPROCESSMODE,0)
TASK(/CPMB/APPEND_LOAD,TARGETMODE,%TARGETMODE%)
TASK(/CPMB/APPEND_LOAD,INPUTNO,%TEMPNO1%)
TASK(/CPMB/APPEND_LOAD,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/APPEND_LOAD,RUNLOGIC,%RUNLOGIC%)
TASK(/CPMB/APPEND_LOAD,CHECKLCK,%CHECKLCK%)
TASK(/CPMB/APPEND_LOAD,KEYDATE,%SELECTION_KEYDATE%)
Thanks & Regards,
Ramesh.

VBA problem with SAP BPC report

Hello
I have an EVDRE() SAP BPC report where one of the member id selection is derived using a VBA script. The problem I'm having is when I click on expand and refresh icon, the member id changes to #Value and the expansion and refresh fails as #Value is not a member id.
I would really appreciate any help on understanding why on expansion my VBA selected member id is replaced with #Value and how I can fix this if that is possible.
Many thanks
Hina

Thank you for your help with this problem which is now resolved.
Just to clarify we are on SAP BPC version 5.1
How it was resolved....
We had to use BEFORE_EXPAND as advised and also fix the calculation reference and finally also use AFTER_REFRESH.
We used VBA code to remember the dropdown lists option
and
copy the calculated member id into the pagekey dimension cell.
The AFTER_REFRESH restored the dropdown list option selected.
Not sure if the code is helpful but this is what we used....
Dim intRegionChoice As Integer
Dim intSegmentChoice As Integer
Dim intCountryChoice As Integer
Function BEFORE_EXPAND(Argument As String)
'Range(MCC_NodeToUse).Formula = Range(MCC_NodeToUse)
'Sheets("MCC").Select
'Sheets("MCC").Calculate
intRegionChoice = Range("AnswerRegion").Value
intSegmentChoice = Range("AnswerSegment").Value
intCountryChoice = Range("AnswerCountry").Value
Range("PickUpUserSelection").Value = Range("MCC_NodeToUse").Value
End Function
Function AFTER_REFRESH(Argument As String)
'MsgBox "After something"
Range("AnswerRegion").Value = intRegionChoice
Range("AnswerSegment").Value = intSegmentChoice
Range("AnswerCountry").Value = intCountryChoice
End Function
Thank you for all your help.
Hina

Refresh/Copy of SAP BPC/HANA Environment

Hi experts,
We are running SAP BPC on HANA with BW as our EDW. We would like to refresh our Regression environment with Production. However, i understand that with HANA technology the refresh may not be as simple as just a copy exercise.
Could you please advise on what are the steps or procedures that we need to take note of when undertaking such an exercise?
Thank you.
Kind regards,
TL

Hi TL,
What kind of refresh you are talking about: is it BPC Backup & Restore or system backup and restore?
If it's BPC tool then you shouldn't see any difference from similar procedure on another DB.
If it's HANA backup and restore then it's a completely different thing depending if your HANA box is co-habituated or not.
Please clarify.
Regards,
Gersh

SAP BPC installation - Errors during setup in the create database step

Hi! I have a real big problem installing SAP BPC. It's a Microsoft multi-server installation.
I've got two servers: 1) the database server with the SQL Database and Analysis Server 2) the application server with all the rest.
I log on and I installed everything on the servers with a specific domain user: this user is administrator on both servers and even on SQL Server.
My problem occours when I execute the "SAP BPC setup" on the application server: during the "create database" step I receive two errors:
first error pop-up:
Error ([SQL-DMO]This cache contains no result sets, or the current result set contains no rows.)
second error pop-up:
System.Data.SqlClient.SqlException: Cannot open database "ApShell" requested by the login. The login failed. Login failed for user MyDomain\MyUser
After the SAP BPC setup:
- in the SQL Database Engine the ApShell database was created
- nothing for ApShell was created in Analysis Sever
- in the Even Viewer of the database server I've got this error: Login failed for user 'MyDomain\MyUser'.
It's very strange because if from the application server, using "SQL Server Management Studio" (always with 'MyDomain\MyUser'), I connect to the database server: I can login, create and delete databases on the SQL Database Engine and even on Analysis Server without any sort of problem.
To complete my status, I can say you Analysis Sever is on the default port. I use SQL Server 2005 and I even tryed to reinstall it and SAP BPC but nothing change.
At this point I checked these two topics on this forum:
Mulit-Server Install - Installation fails while creating AppServer Database
Problem during BPC installation
1) At first I tryied this solution:
Into multiserver installation guide is specified that actually in case of multiserver environment you have to copy apshell.db9 file from installation kit into db server. Into a drive from where SQL server is able to read when you are doing restore with Management Studio.
During the installation you have to go into advance options and to specified the path (local path from db server where you did the copy of apshell.db9).
but nothing change: the "SAP BPC setup" problem I have still persists.
2) Then I tryed this workaround:
If so, you can try a "restore appset" from server manager. Rename the Apshell.db9 file (or copy it) and name it Apshell.bak
During server manager restore, point only to the Apshell.bak file. Server Manager will tell you that webfolders and filedb files are missing, but it found the webfolders and filedb (again, only if the original bpc installation successfully created those folders)- and then it will try to restore Apshell.
That may work in spite of whatever problem is keeping the installation program from performing the same tasks.
but the "restore database" fails > I've got the error written in red: OLAP database - fail
What can I do to solve the problem? If it is necessary, I can reinstall SQL Server and SAP BPC but I need to know the way to solve the setup error.
Thanx very much in advance for your kindness if you can help me.

Thanx very much to everyone for the kind support. Unfortunatly, my problem persists.
- SQL server is EE.
- I installed SQL server (including SSAS) using MyDomain\MyUser.
- MyDomain\MyUser is windows administrator on both servers.
- MyDomain\MyUser is SQL Server and SSAS administrator.
- SSAS service is running under the same service account than the SQL Service.
- All my MSSQL services runs as Local System.
- I'm installing SAP BPC using MyDomain\MyUser.
- I also checked the SSAS service account specific rights to the SSAS data folders.
SAP BPC installation still fails exactly as above (popup errors during SAP BPC setup, no ApShell etc. etc).
In the database server, windows event viewer errors after the unsuccessful installation are:
1) SOURCE: MSSQLSERVER
Failure Audit: Login failed for user MyDomain\MyUser
2) SOURCE: MSSQLSERVER
BackupDiskFile::OpenMedia: Backup device 'MyPath' failed to open. Operating system error 5(Access is denied.).
As regard as point 1: The Failure Audit error into the event viewer happens only during SAP BPC installation. Otherwise it is always Success Audit.
Also, as I told you, if from the application server I connect with SQL Server console to SSAS, located on the database server, using MyDomain\MyUser: I can create delete SSAS dbs without any sort of problem.
For point 2:
I tried 4 differents SAP BPC installations as follows:
- to go into advance options and to specified the path (local path from db server where I did the copy of apshell.db9).
- to go into advance options and to specified the path (local path from application server where is the copy of apshell.db9).
- to go into advance options and to specified the path (network path of a share folder with apshell.db9 and permissions to everyone)
- to don't go into advance options and to don't specify the path.
but every time nothing change: the "SAP BPC setup" problem I have during my initial post still persists. In the same way I written at the beginning of the topic.
I don't know how to solve it.
Edited by: Francesco Andolfi on Jan 5, 2011 6:37 PM

Hi Do we have tables for SAP BPC EPM Comments ? if we have what are they could you please explain some one.

Hi Do we have tables for SAP BPC EPM Comments ? if we have what are they could you please explain some one.

Hi Narahari,
Yes, we have tables for SAP BPC EPM comments and it is stored in backend BW.
Please follow the below steps to see it -
1. Go to RSA1 and find the infoprovider name for the application/cube that contains the comments For example, the infoprovider name is /CPMB/VZIKG4O
2. Then Go to SE16 and enter the comment table name. The comment tables are generated tables. You can determine there name by using the following rules:
a. The table name always starts with '/1CPMB/'
b. The rest of the name is derived from the infoprovider name - it is the first two characters after the second '/' + the fourth, fifth and sixth characters + CMT (for comments) or CMTA (for archived comments). In my case the comments table name would be "/1CPMB/VZKG4CMT" and the archived comments table would be "/1CPMB/VZKG4CMTA".
3. Hit 'F7' or click the table contents button.
4. Enter the criteria for the comments you wish to export.
Hope this helps.

SAP BPC NW 10 - Restore InfoArea /CPMB/ENVIRONMENTSHELL

Similar Messages

Maybe you are looking for