SAP console and scanner!!

Hi
I Have a req here ..where in two diff types of scanner are attached to diff shipping point and based on the scanner, i need to display a selection screen and hence the output....but the problem is these selection screen needs to be displayed on the scanner screen and SAP console comes into picture....
How to go abt this req?
Regards
Gunjan

Hi Gunjan,
Any doubts regarding SAP CONSOLE would be solved refering these threads
Your job would be typically done with the help of SAPConsole.
Check this link very carefully.It has a very useful description as in how to integrate bar-code data into SAP R/3 using RF Programming and SAPConsole.
http://www.enowa-consulting.com/download/SCM-Dec-Garg-v1.pdf
I am again mentioning the links from the previous reply
For achieving this you need to install SAP console on your PC and a Telnet Server for integration.
1.chk the following links regading sap console installation and configuration,which I suppose is your basic requirement .
RFID
Regarding RFID
Regarding RFID Design
Probably yow will also be required to do RF screen programming.
Check the following link for that,
Re: RF screens development
RF Transaction Programming -
Regarding RF transaction LM19
I suppose this should solve your query
Regards,
Pawan.

Similar Messages

Sap console bdc

Dear All,
We have developed some customized z-transactions related to standard MIGO
transaction for our Barcode Implementation project so that they can
run on Hand held terminals(HHT) as HHT doesnot Support SAP GUI (for ex : table controls, Tab strips etc.,)
The HHT is connected to SAP console via Telnet.
And we have used some BDCs which are developed using recording (SHDB) in these
customised transactions.
Transactions along with BDC's are working absolutely fine when running on SAP GUI (Desktop computers) .
But when we run these transactions on SAP console and while executing BDC's, it shows
the follwing Message and BDC's doesn't work on sap console.
Message Type - A
Message ID    - CNDP
Message No    - 003
Message       - Function DP_PUT_CLIENT_TABLE45A is not available
Message status- TO is not created
regards,
Rahul Shukla

Hello
The link you have provided is not working. And Have identical problem in completely different context.
I'm trying to use GUILIB.DLL to command GUI from Visual Basic.
To do it I had to write a DLL whish is changing the call covention to VB one. The DLL is just wrapping all exports.
Everyting works fine with Z-transactions and e.g. VD51 but
in VA01 or VD02, after filling the first screen with data sending the Event I get this error (DP_PUT_CLIENT_TABLE45A not available) after calling It_GetEvent.
DO you know any remedy (my patch level is 57 on 6.20 GUI)
thanks in advance for help
Stefan

SAP console goods receipt purchase order

Hi all,
I'm new at SAP console, and I need it to make goods reception from a purchase order with a mobile device (PDA).
Is there any way to make it without performing a Warehouse Management customizing in SAP ERP system??? I've seen a goods receipt menu with several reception options which seems to be WM options (transport orders, etc), but I didn't see the option to make a goods reception with reference to a purchase order (like in MIGO transaction)
Thanks in advance
Regards

OK, thanks a lot, that was very helpful. Now I know how to focus the problem I've some doubts.
I'm going to customize a basic WM to work with the SAP console.
My idea is to do a process similar to the next one:
1) The purchase order is created inn SAP R3 with confirmation type 0004 (for inbound deliveries).
2) Create in SAP R3 the inbound deliveries corresponding to the previous purchase orders.
3) Create in SAP R3 the Transport Orders corresponding to the previous inbound deliveries.
4) Confirm de Transport Orders/Inbound deliveries from the SAP console mobile device.
5) Post the goods receipt for the confirmed inbound deliveries in SAP R3.
Is there any way to avoid steps 2 and 3? I mean:
- Can the inbound deliveries be automatically generated when the purchase order is saved?
- Can the TO's be automatically generated when the inbound delivery is created?
Right now, I'm doing these 2 steps with collective transactions, but if it is possible I'd like to do it automatically.
Thanks a lot.
Best regards

SSHv2 supported by SAP Console?

Does SSHv2 (secure Telnet) work with the SAP console and does SAP support this?

Yes, you can secure the connection between your wireless devices and the server where your SAPConsole is installed by using a SSHv2 server. I assume here you want to use wireless devices running windows CE or Pocket PCs or Windows Mobile 5.0). You would have to install a SSHv2 client on each of the devices and a SSHv2 server software on the computer where the SAPConsole is installed. We use a complete solution including client and server software from [Georgia SoftWorks|http://www.georgiasoftworks.com/prod_ssh2/ssh2_server.htm]. We are very pleased with the performance we see and the peace of mind that our data is point-to-point encrypted using the strongest possible SSHv2 encryption. The solution is very easy to install, originally we were very worried about the nightmare of having to provide and maintain Private Key Infrastructure (PKI) certificates but this product allows you to completely avoid this issue. Conceptually the system works sort of like a telnet-based solution but over a secured connection.
Hope this helps,
Rodney

What is difference between Web Console and Web SAPConsole

Hello,
What is the difference between Web Console and Web SAPConsole.
Thanks,
Milind M.

Hello Milind,
I am not sure that there is any difference between Web console and Web SAP Console.
But of course, there is a lot difference between SAP Console and SAP Webconsole.
Using SAP console you can use mobile data entery with Character support where as with the help of SAP webconsole you can use web supported mobile data entry in which you can use touch screen device.
Hope this helps.
Regards
Arif Mansuri

Services in SAP management console and related window services and process

hai
can u please any one of you can send me the services in SAP management console and related window services(in adminstrator/services) and process in task manager.
thanks in advance.
Naga Laxmi

Hi Naga,
Please refer to this article for the processes relevant to the Java Instance:
http://help.sap.com/saphelp_nw04/helpdata/en/62/1bf03eae11e16be10000000a114084/frameset.htm
Except the processes of the Java instance you can find several processes of the IGS server and the ABAP disp+work processes.
You can easily find the relevant services by their SAP prefix.
Hope this helps.
Best Regards
Vyara

SAP Management Console and Services

Good morning everyone,
I am trying to understand more about the services used by the SAP System, the order in which they are / need to be started.
First I have a precise question regarding what appears to be, to me, as a discrepancy between the SAP Management Console and The Services Console.
At the moment I have a Server with the SAP System stopped. It shows the correct information in the SAP Management Console but when I look at the Services Console the following services show as started:
SAPOsCol, SAPPRD_00 & SAPPRD_01
SAPCCMSR.01 & SAPCCMSR.11 are set to manual
Has anyone got an explanation on why different info are displayed in both console?
Also, is there a way of checking if the SAP Services are running without going through any interface (Management Console)?
Finally,
In the Services Console the SAPOsCol, SAPPRD_00 & SAPPRD_01 services are set to automatic but when we restart the Server the services do not restart automatically even so they show as starter. Can anyone give me direction on what I need to check or change for these to start properly?
Thank you
Corinne

Corinne,
The Services SAPOsCol, SAPPRD_00 & SAPPRD_01 started doesnot mean that SAP is up. So even if you stop SAP through MMC it will show these services as started. These Services denote whether the Instance PRD_00 and PRD_01 are enabled in MMC. So if you stop these services, you wont be able to start SAP through MMC.
SAPCCMSR.01 & SAPCCMSR.11 are set to manual -- These are optional CCMS Agents , so they are set to manual. If you need them you can change them to Automatic
SAPOsCol, SAPPRD_00 & SAPPRD_01 are set to automatic. This should mean that they get strated with the start of OS during a reboot. If they are not getting started there is some issue.
Hope this helps!
Reward points if useful!!!
Cheers!
Bidwan

Difference between SAP SLD and SAP Management console

Hello,
It seems that both System landscape directory and SAP management console have some overlapping features. The services can be started or stopped in both. Is it true? Does anyone know the difference between these 2 and where does Solution manager fit in?
Thanks
Shailik

Hi,
SAP SLD is the central information provider in a system landscape.this contains both Component information and Landscape description.COMPONENT Info in sense all the sap products and components along with their versions, And also third party products also.LANDSCAPE desc in sense the description of all the systems in particular landscape.
Example:This can shows exact idea for you.Components like CAF,Webdynpo(WD-java),BPM etc info.And the host names,Message server ports etc.Here we dont have start/stop functionality.
SAP MC provides a common framework for centralized system management. It allows you to monitor and perform basic administration tasks on the SAP system centrally, thus simplifying system administration. Using the SAP MC you can
1.Monitor and control (start, stop, or restart) the SAP system and its instances with a single tool
2.Monitor system alerts
3.Display the list of all access points to an SAP system etc.
We can see difference by looking into http://<host name>:<port>/index.html
Look and feel are also differ.
For more info you can go through these links of sap help.
For SAP SLD:http://help.sap.com/saphelp_nw04/helpdata/en/fe/39ae3d47afd652e10000000a114084/frameset.htm
For SAP MC:http://help.sap.com/saphelp_nwce10/helpdata/en/44/c707c053550f2ce10000000a1553f7/frameset.htm
Thanks,
Murthy.

BarTender and SAP Console

Hi All,
We are working on SAP Console,
we are posting the document using the RF Guns and it is posting well,document is creating in SAP.
after posting the document,label should be printed in ZEBRA printer.
We designed label using bartender software,this label contains barcodes as well.
we downloaded the bartender .ITF file into SAP Script using SO10 txn.
but it is printing only text and value are not printing.
Please can any one tell how to print the label using the RF Guns or RFID.
This is urgent and solutions are highly appreciated.
Thanks,
Srinivas.

Hi there. Have you tested printing barcodes from the BarTender software itself before upload to SAP? If the barcode still does not come out from the software itself then the software is not sending the correct printer controls to your ZEBRA printer. My guess is that it still won't come out even if you print from BarTender.
If the field being printed as a text rather than a barcode then it's most definitely the printer control. I'm not familiar with BarTender as we are using E-Bizco's barcode dll's and PCL barcode server.
If all else fails you could try to create the form using Smartforms. Please see sap help for "New Barcode Technology". With this technology smartforms can print the barcode for you without the need for a separate software like BarTender. So that for me would be a better solution as less things could go wrong. However, this will only work in Smartforms and not for Sapscript.
Please update me on the results then we can continue.

ERROR WHILE OPENING SAP CONSOLE MANAGER

Hello Experts,
i am unable to login to SAP console manager, i see errors in event viewer
could you please guide me how can i remove this errors from event viewer.
when i am opening the windows, i get a pop up message saying, one or move events not closed properly....
IN system log under SAP console i see event viewer errors created...
please help, so that i can start my SAP training at the earliest....
Best Regards.....

Hello
Investigate via the system and/or application logs. Restart the system (cold restart) hardware to clear shared memory.
Regards.

What is the T.code in SAP R/3 for SAP console applications

sequence picking in Hall 52. Batch number 0017137168 was assigned to 2 associates.
One associate was assigned to the picks and the other associate confirmed the TO'S
This is requirement by client
What is the T.code in SAP R/3 for SAP console applications

hall 52

Idocs are not prosessing even after ALE settings in SAP XI and ECC

Hi Experts!,
<b>I have a system which has SAP ECC and SAP XI 3.0 installed with 2 instances on the same operating system. ( In MMC you can see ECC and XI under the same SAP console tree ).
I have made many times all possible ALE settings between ECC and XI and I was unable to deliver the IDOC [ Idoc scenario- unable to get the IDOC in the receiver side (R3)]
Could any one please let me know how to solve this issue.
Useful answers will be rewarded.
</b>
Thanks in advance!,
Sunil

Hi Martens,
I appreciate your kind reply, error : Unable to convert ALE logical system.., this is the error message I am getting, while I do File to IDOC scenario. So what may be the wrong thing in this configuration, Have done ALE settings ( Log sys, assign log sys, partner profile, port and RFC connection from R3 to XI).
So could you please let me know the solution.
regards,
Sunil

Problem in SAP Console connection - yellow only

Hi Guys
i change the password of SAPC11 at SQL> prompt, alter user sapc11 identified by 123xyz, when i come back and connect the SAP Console, its not work its become yellow. i think i got some authentication problem due to change of password in Oracle, is there any body help me out, how to set the password at the console again
thanx in advance

Hello,
It is not always safe to change sap schema id password via sql.As this password has to be stored in SAPUSER table where from the work process makes a SELECT against the SAPUSER table and reads the password of SAP<SCHEMA-ID>. Then the work process connects with username SAP<SCHEMA-ID> and the password retrieved from the table SAPUSER. In case of any deviation connection cannot be established and the work process stops with an error.This causes u the prob.
Try resetting the password again via brtools.
In the sap server run BRTOLS from cmd prompt then proceed as follows
Brtools----->Choose Additional Functions--->Choose Change Password of DB user
Enter choice 2(Database User/Password)
In user prompt give sapc11 and in password prompt put the password u had changed earlier ie abc123.
Then enter c (for continue) u will be prompted for the new password
When u put the new password it wont be displayed in the prompt just type
Complete the entire guided process.
Hope this resolves your prob.
Dont forget to award points if resolved.
Regards

Error HTTP Status 500 after installing DS Management Console and IPS Services on BI Enterprise Server

The following error
HTTP Status 500 - while trying to invoke the method java.util.Properties.entrySet() of an object loaded from local variable 'globalProperties'
occurred after installing DS Management Console and IPS Services on BI Enterprise Server
BI Enterprise Edition 4.1 SP1 and BODS 4.1 SP1

Hi,
If you can't see the login screen of the CMC then it's a problem of webapps and not EIM services.
Try cleaning the Tomcat cache for the BOE webapps and let Tomcat re cache it. Often it does the job.
- Stop Tomcat
- Rename the BOE folder to BOE-OLD in C:\Program Files (x86)\SAP BusinessObjects\tomcat\work\Catalina\localhost\
- Start Tomcat
When the Tomcat process in task manager is done working (it can take 10-20 min+) then try again.
When you're done, you can delete the BOE-OLD folder.
Let me know!

1 SAP Console for 2 clients (on the same system)

Hi,
We are merging two business units on 1 SAP system. In the beginning they will both have their own client on the same system.
Within both BU's SAP Console is being used. Can we use one SAP Console for both clients?
Or are separate SAP Consoles needed?
If it is possible to use 1 SAP Console, please let me know how (what to do).
Thanks in advance for your help.
Cheers,
Thomas.

Instead of read-only access to each other's iTunes directories, I followed instructions posted elsewhere on this forum and have ITunes in both accounts pointing to the same physical file. From my account, I can see all the songs, both the ones loaded from CDs and the ones downloaded from ITunes (using my ITunes account). From her account, she can see the songs I loaded from CD, but not any of the songs I've downloaded.
If I share my ITunes library, then she can open the shared file and see all of the songs, downloaded as well as those from CDs. However, if she selects any of the downloaded songs, she cannot put them into playlists or otherwise copy them to her IPod.
She doesn't have an ITunes account. Her ITunes is set up to use my account and is one of the two authorized "Computers" for my account. I thought that going into ITunes and authorizing my ITunes-account would have solved the problem, but it doesn't.
I'm running the latest ITunes (Macintosh) software, version 7.0 (7.0).

SAP console and scanner!!

Similar Messages

Maybe you are looking for