SAP GUI 7.10 problems

I already encountered this problem in version 6.40, that's why I installed 7.10 (patchlevel 3). It runs on a laptop with Windows XP Professional SR2.
I may have several sessions open connected to 1 or more different SAP instances (all 4.6C). Very often when I switch between sessions either via the task bar or using alt-Tab I all of a sudden loose all my sessions and I have to connect all over again. The Sap Logon Icon remains visible in the System tray until you hover the mouse over it, then it disappears too.
Does anyone recognize this problem and hopefully has a solution for it?
Any help is mych appreciated!!
Ton Teuns

You try install path 32
go to: https://forums.sdn.sap.com/click.jspa?searchID=19954340&messageID=6264618
or
you back to the version old
t-code se38 -- UtilitiesSettings changed the radiobutton to Front End editor (old), because your version of SAP GUI path < 32 you obtain dump if you select the Front End editor (new)
I hope that this it help you
Cordial greetings.

Similar Messages

Transaction iView - SAP GUI for HTML - Problem while hiding menu bar

Hello all,
I am trying to hide the OKcode field and the Menu button in a Transaction iView of type SAP GUI for HTML. I am following the SAP note 1010519. However, nothing seems to change, even after adding the parameter ~webgui_simple_toolbar = 0 or any other value.
I added the parameter to the service: default_host ->sap -> bc -> gui ->sap -> its -><b>webgui</b>
After going through few posts relating to this issue, I figured out that passing application parameters would not work. Also, using IAC is not an option for me.
Can someone help? How can I hide the OKCode field and Menu bar?
Thanks and Regards,
Reena

Hello Reena,
Maintaining the parameter
~WEBTRANSACTIONTYPE EWT
will solve your problem. You can also create an IAC iview. Here is a document for the same.
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/_d-f/Displaying%20SAP%20Transaction%20as%20Internet%20Application%20in%20Portal.pdf">How to diplay a transaction as IAC iview</a>
Also remove the parameter ~noheaderOkCode.
Hope that helps.
Regards
Deb

SAP GUI for Java - Problem

Hi!
When I try to open a new mode in SAP GUI for Java (Release 7.10 rev 4 with Java Version 1.5.0_15-b04), I receive the following error:
Error when starting "gmux server"!
JniGmuxManager status = -1
Has anybody got an idea how to fix this?
Regards
Thomas

Hello Thomas,
that could have many reasons like incomplete installation of SAP GUI for Java, unresolved dependencies (to dynamically linked libraries like C/C++ runtimes) etc.
What platform?
Is there any output on the console?
I suggest to file a bugreport on http://service.sap.com/message and add a trace according to [note 683960|https://service.sap.com/sap/support/notes/683960].
Best regards
Rolf-Martin

ALV Not Fix a Column for specific SAP GUI

Hello Team.
we have a little problem when We try Fix a Column.
We create an ALV report, for user with the SAP GUI 7.20
ls_dispo-FIX_COLUMN = 'X'.
Some user has the Patch Level 4 and the fix column work Fine.
Other has the Patch Level 7, and when the user move the scroll bar, the fixed column not work.
I think Some Difference in parameter configuration in SAP GUI is the problem,
Can you help me.
Best Regards

Hi David
I am not sure this might be a solution if you have mentioned all the parameters programatically but you can try if this works
You can compare the Options between the users GUI
Goto ->Customize Local Layout ( Alt + F12 ) on your Logon Screen-> Options
and check if there is any change between these two Patch Levels.
Thanks
Dev

SAP GUI 730 PL8 Installation Problems

Hi all!
We are facing a problem with the following software product:
Information NwSapSetupAdmin.exe:
SAP GUI for Windows 7.30 (Compilation 3)
Component ID: 1460620d-c8bc-44c2-86ec-e632e0986b01
Version: 27625
Latest Patch Level: 8
SAP Automatic Workstation Update
Component ID: 40d11884-3906-4e67-8a96-91035ca09814
Version: 900.42
Latest Patch Level: 45 Version 9.0.45.0
Information SAP Logon:
Release: 730 Final Release
Dateiversion: 7300.3.8.1084
Build: 1478436
Patch-Level: 8
Within the SAP GUI Installation (NwSapSetup.log) the following error occurs:
16:25:13 NwSapsAtlC 1   Executing script action...
16:25:13 NwSapsAtlC 1   Script-action: Checking reboot condition.
16:25:13 NwSapsAtlC 1   Script-action: NwEngine.Context.Reboot = 1
16:25:13 NwSapsAtlC 1E Microsoft VBScript runtime error: Error message: Unknown error 0x800A01B6. Error code 0x800a01b6.
                         Object doesn't support this property or method: 'NwEngine.Context.Args' (Line 4, Col. 5)
                         The setup script contains the error listed above. Please contact your system administrator and provide this information, for example by sending him a screenshot of this message box (Press Alt+PrtScrn to create the screenshot and copy it to the clipboard).
16:25:13 NwSapsAtlC 1E Failed to run script:
                              ----+----1----+----2----+----3----+----4----+----5----+----6----+----7----+----8
                           1: NwEngine.Context.Log.Write "Script-action: Checking reboot condition."
                           2:             NwEngine.Context.Log.Write "Script-action: NwEngine.Context.Reboot = " & NwEngine.Context.Reboot
                           3:             If NwEngine.Context.Reboot = 1 Then
                           4:                 If NwEngine.Context.Args("SuppressReboot") <> "" Then
                           5:                     NwEngine.Context.Reboot = 0    'Setting Flag for no Reboot
                           6:                     NwEngine.Context.Log.WriteWarning "Script-action: Reboot suppressed by the user. NwEngine.Context.Reboot = " & NwEngine.Context.Reboot
                           7:                 ElseIf NwEngine.Context.Args("DelayReboot") <> "" Then
                           8:                     NwEngine.Context.Reboot = 1    'Setting Flag for delayed Reboot
                           9:                     NwEngine.Context.Log.WriteWarning "Script-action: Reboot delayed by the user. NwEngine.Context.Reboot = " & NwEngine.Context.Reboot
                          10:                 Else
                          11:                     NwEngine.Context.Reboot = 2    'Setting Flag for immediate Reboot
                          12:                     NwEngine.Context.Log.Write "Script-action: Enforce immediate reboot."
                          13:                 End If
                          14:             End If
                              ----+----1----+----2----+----3----+----4----+----5----+----6----+----7----+----8
                         Error message: Unknown error 0x80020101. Error code 0x80020101.
16:25:13 NwSapsAtlC 1E Failed to parse script. Error message: Unknown error 0x80020101. Error code 0x80020101.
16:25:13 NwSapsAtlC 1E While processing Component '$MS System Files' with Id '{F270A214-3AD3-4235-9C74-F4D323B54976}' 1 error(s) have been registered.
16:25:13 NwSapsAtlC 1   CompAct.:Installed Component '$MS System Files' with Id '{F270A214-3AD3-4235-9C74-F4D323B54976}'
With this the NwSapSetup.log ends with:
16:26:23 NwSapSetup 1 Return-Code: 145
In the next logical step within our environment a uninstallation of the SAP GUI gets started:
   Commandline:
'"C:\Program Files (x86)\SAP\SapSetup\Setup\NWSapSetup.exe" /Silent /Uninstall /Package=PEACY'
This operation gets done with:
12:35:47 NwSapSetup 1 Return-Code: 0
After that the installation of the SAP GUI gets started again with:
   Commandline:        '"C:\peacy.sys\source\SAPGUI730PL8\source\setup\NwSapSetup.exe" /noDLG /norestart /Package=PEACY'
Now the Installation gets done with:
12:52:12 NwSapSetup 1 Return-Code: 0
Every first installation of SAP GUI 7.30 PL8 is affected. This is a cross-platform issue (Windows 7 and Windows 8.1). If there was our older package version (SAP GUI 7.30 PL4) installed, the installation of SAP GUI 7.30 PL8 gets done without problems.
Every new client with the SAP GUI 7.30 PL8 assigned or the re-installation of it, and every first installation of the package on a client without SAP GUI leads to the mentioned issue - package gets installed with the mentioned error, afterwards the uninstallation gets started by our environment and finally the installation gets done with the second try. This is not a practicable method for our support staff.
Are there any hints how to resolve this issue. (A upgrade to the newest patch level of SAP GUI is not a practicable solution)
Thanks in advance!
Best regards
Christian

Hello Christian,
For older releases of the SAP GUI client a good approach is to create package for uninstalling old SAP GUI. Depending on the state of the old SAP GUI's you're upgrading those may not be "clean" enough to warrant upgrading in place.
The older GUI's have component's no longer provided with the newer releases so most recommendations are to uninstall completely an do a fresh installation.
I credit Matt Fraser for this information and suggest reading his documentation. The last 4 articles are germane to you're situation. I hope this helps you.
http://scn.sap.com/thread/3620515
http://scn.sap.com/docs/DOC-55477
http://scn.sap.com/docs/DOC-55574
http://scn.sap.com/docs/DOC-55575
http://scn.sap.com/docs/DOC-55633
http://scn.sap.com/docs/DOC-55634
http://scn.sap.com/docs/DOC-55674
Cheers,
Dan Mead

Performance problems with SAP GUI 7.10 and BEx 3.5 Patch 400?

Hi everybody,
we installed SAP GUI 7.10 and BEx 3.5 Patch 400 and detected hugh performance problems with this version in comparison to the SAP GUI 6.40 and BEx 3.5 or BEx 7.0 Patch 800.
Does anybody detect the same problems?
Best regards,
Ulli

Most important question when you are talking about performance-issues:
which OC are you working on and which excel version?
ciao
Joke

In case of problems with SAP GUI for Java ...

Hello all,
in case of having problems (errors, ABAP dumps etc.) with SAP GUI for Java, please create an OSS message on component BC-FES-JAV with information described in OSS note 326558
http://www.service.sap.com/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700010521522001.
This makes sure our official support channels get aware of your problem.
Thanks and best regards
Rolf-Martin

Hello Rolf-Martin,
i don't have access to this website to view the note.
The version of the Suse libc is:
GNU C Library stable release version 2.3.2, by Roland McGrath et al.
Copyright (C) 2003 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
Compiled by GNU CC version 3.3 20030226 (prerelease) (SuSE Linux).
Compiled on a Linux 2.4.20 system on 2003-03-13.
Best Regards,
Piotr Brostovski

SAP GUI 7.10p15 weird problem on FB70

Hi all,
We upgraded SAP GUI 7.10 to patch level 15 from patch level 14 using the install server on our Windows XP machines. A weird problem seems to appear since then on FB70. You press once or twice the ENTER key, without filling any field on the screen and the GUI stays on a busy state forever (trying to constantly redraw the screen as to show an error message on missing account number). It results to 100% CPU usage on the client (Windows XP machines, tried on Windows 7 also with same result) and seems to also stress the SAP system a bit. The only way to stop that behavior is to use the Windows task manager and kill the busy window. I have not seen this behavior before and can't reproduce it in any other transaction until now.
I got access on a machine that was still on patch level 14 and works just fine. I did the upgrade and the same behaviour (busy, 100% CPU) instantly appears. Oddly enough, this behavior does not occur if I run FB70 throught the debugger (/h) in any case.
Have you seen something like this or do you have any clue why that weird behavior might appear?
Thank you very much in advance for any insight

Hello Artemios,
Yes, this seems to be a know issue with Patch 15. Please open a ticket on BC-FES-GUI to get a fix for that or wait until Patch 16 is released.
Kind regards,
Martin

Problem while printing from SAP GUI for HTML

Hello,
We are trying to print a delivery confirmation from the portal using SAP GUI for HTML. We have followed note 771683 to do this. However we are facing the following problems:
1) The print action(PDF creation) is not triggered until the user performs some action
2) the PDF that is created is corrupted(does not open)
In order to correct this we tried to implement note 957292. However, the changes to the object FRONTEND_PRINTPOLL_FRONT_REQUEST.HTM mentioned in this note created problems. So we decided to do the changes to this object manually. But we see that the SAP note doesn't contain any information on changes that should be implemented for this object.
Question:
Is the note 957292 only way to solve the printing(PDF) problem? If not, how can we trigger the automatic creation of the PDF and remove the error from the PDF file?
If yes, any idea what is causing the problem during the note implementation?
We are on NW2004s - EP7.0 SP10
ITS 7.0
Thanks in advance.
Regards,
Reena

Hi,
configure printer in SPAD , no setting for JAVA GUI
check note
605467:SAPscript/Smart Forms: Print preview in SAP GUI for Java
634158 SAPscript/Smart Forms: Print preview in SAP GUI for Java (2)
1024624 SAPscript/Smart Forms: Print preview in SAP GUI for Java (3)
regards,
kaushal
regards,
kaushal

Display problem in some t code in SAP gui 710

Hello experts
we are using SAP gui 710,
some users facing display problem when they run some t code like CS11/MB51 etc.
the data grid show some rows in disordered manner, however if we download this into excel
its shows perfect data.
if user scroll the report as they appear than also many rows goes disturb.
i can't understand why this happen.
this is occurring on many front end system or on many tcods.
plz help me to resolve this.
Best Regards
Deepak Singh

Hi,
You can check the screen resolution of the user desktop. I feel this could be a reason.
Regards,
Deepak Kori

Problem with SAP GUI for HTML

Hi SDN
I am creating a SAP transaction iView with SAP GUI for HTML. I have give the Transaction code VA01 but when i execute the the iView it is displaying the SAP Easy Access screen in html. Can any one suggest me how to rectify this error and display the required transaction in html.
Thanks in advance.
Regards
Basha

Hi Basha,
Try this in the browser:
http://<host>:<port>/sap/bc/gui/sap/its/va01?sap-client=100(XXX)
1) It will ask for the username and password
2) Enter the credentials and it should directly take you to the VA01 transaction
If it fails again, try this:
http://<host>:<port>/sap/bc/gui/sap/its/vl31w?sap-client=100(XXX)
This should display the "Create Inbound Delivery NotificationTitle Create Inbound Delivery Notification " sreen."
If it faisl again, there is some problem with the way the ITS has set up. Check with your basis.
Thanks,
Sathya

Problems installing SAP GUI 7.1 patch level 4 for Bex Analyzer

Hi all,
I have a problem installing the SAP GUI for BW - running office 2003, have tried to install without success. The old Bex tools seem to work, but not the new ones and when opening any of the tools report designer or web application designer I get the error : System configured incorrectly. The new functionality in Bex Analyzer do not respond when clicking on the icons.
Thanks,
Dirko

Hello
please download the compialtion 3 cd of sapgui 710.
http://service.sap.com/installations
Entry by Application Group
SAP Frontend Components
SAP GUI FOR WINDOWS
SAP GUI FOR WINDOWS 7.10 CORE
Installation
Compilation 3 cd is delivered with the sapgui patch level 11!
Also the sapgui patche you can find in
http://service.sap.com/patches
Best Regards
Sven

Problem with 'SAPGUI_PROGRESS_INDICATOR' in SAP GUI 7.10

Hi!
We have a problem with SAP GUI 7.10 PL 11. When running this little code snipet, the SAP GUI crashes and SM21 mentions a broken pipe while calling writev in niuxi.c
DATA: lv_i type i,
      lv_string type string.
DO 50000 TIMES.
lv_i = lv_i + 1.
lv_string = lv_i.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
   EXPORTING
*     PERCENTAGE       = 0
     text             = lv_string.
ENDDO.
Can anyone confirm this problem or is it solved with a higher patch level ?
Thank you,
Markus

Hello Markus,
this code snippet would be perfect to be added to an official bug report created at http://service.sap.com/message on component BC-FES-GUI.
Best regards
Rolf-Martin

Problem in Transactional iView with SAP GUI Type

Hi,
I've one Transactional iView in which I'm opening one SAP report. This report can be downloaded using option Local File. Once I click on this option, one popup appear where format can be selected and afterward file can be downloaded.
Problem: Once I choose SAP GUI Type in Transactional iView is SAP GUI for HTML then it wouldn't allow me to download file and just hanged, once I click on popup download.
But same is working once I choose SAP GUI Type = SAP GUI for Windows.
Can someone suggest me, what is the problem exactly?
Thanks,
Vikas

Yeah Michael, you are absolutely right, it seems same problem, I'm getting some applet loading exception.
But, I already have JVM installed version j2se1.6, same as colleague have.
I couldn't understand solution properly suggested in Note, can you brief me, would be really great.
The error I'm getting is..
load: class Query.class not found.
java.lang.ClassNotFoundException: Query.class
     at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.net.SocketException: Network is unreachable: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(Unknown Source)
     at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
     at java.net.PlainSocketImpl.connect(Unknown Source)
     at java.net.SocksSocketImpl.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at sun.net.NetworkClient.doConnect(Unknown Source)
     at sun.net.www.http.HttpClient.openServer(Unknown Source)
     at sun.net.www.http.HttpClient.openServer(Unknown Source)
     at sun.net.www.http.HttpClient.<init>(Unknown Source)
     at sun.net.www.http.HttpClient.New(Unknown Source)
     at sun.net.www.http.HttpClient.New(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.plainConnect(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.connect(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at java.net.HttpURLConnection.getResponseCode(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader.getBytes(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader.access$000(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 7 more
Exception: java.lang.ClassNotFoundException: Query.class
Please suggest.
Thanks,
Vikas

Problem With SAP GUI for HTML iView

Hi All,
I have created a transaction iView(SAP GUI for HTML) for the T code SE12, when I view the iview, it get loaded for the first time and if I log out and when i again login to the portal and view the transaction iview it is not getting loaded. If I clear the cache(By pressing Ctrl+F5) the same iview get loaded.
Could any one help me in solving this problem
Regards
Sivaprasath

Hi Shiva,
For SAP transaction iViews better to use SAP GUi for Windows option instead of SAP GUI for HTML.
Hope it helps for you..
Cheers
Phani

SAP GUI 7.10 problems

Similar Messages

Maybe you are looking for