SAP HR Placement ( Urgent )
Hi ,
I have several years of IT experience in SAP HR Modules and am new to United States of America and am looking for new projects here .do you know anybody who can placed me very quickly.
I am hoping my sap business and management knowledge in multinational environments will help me to achieve the goals of US Companys and prove to be a valuable asset.
Thank you for your time and consideration. I will be eagerly waiting for your response.
Very Respectfully,
Sameer.
click on my name u will get my mail id
and any way may
[email protected]
Similar Messages
-
Unable to find the software in SAP Market Place
Hi,
I am unable to find the following software in SAP Market Place.
1. SAP BusinessObjects Live Office XI 3.1 Service Pack 3
2. SAP BusinessObjects BI Widgets XI 3.1 Service Pack 3
3. Life Cycle Manager Service Pack 3
4. SAP BusinessObjects Data Services XI 3.2 Service Pack 1
If anyone is aware of where I can get these software in SAP market place, please let me know the way to get these software.
Thanks in advance.
Regards,
Krishna.Go to http://service.sap.com/patches and navigate to Browse our download catalog->SAP BusinessObjects portfolio
The patches for LiveOffice and BI Widgets can then be found under SAP BusinessObjects Business Intelligence platform (SBOP Enterprise)->BOBJ ENTERPRISE XI 3.1
The patches for LifeCycle Manager can be found under SBOP LIFECYCLE MANAGER
The patches for Data Services can be found under SBOP DATA SERVICES->BOBJ DATA SERVICES XI 3.2
Hope this helps.
Regards,
Stratos -
Hi,
I hope I've selected the right forum for posting a few queries on SAP Market place
Please help me with the below:
Presently, we have an S-User id that is being used by 2 people. Is there any settings or possibility to get / send an email / SMS intimation to both the users every time an OSS message is raised? Alternatively, if another S-user under the same customer ID raises an OSS message, can an email intimation be sent to the Super user?
(At present, I believe an email intimation is being sent once we get a reply from SAP)
RegardsI'm afraid this space focuses on supporting SCN members and their interactions in the community.
There is this document SAP Service Marketplace Overview and FAQ that also contains links to where you can get support for SAP Service Marketplace. -
Hi Frnds,
What is SAP Market place Adapter, when i refer the doc in help.sap.com, i dint get any idea, in which scenarios we will use SAP Market place.....
Regards,
rajHi
You use a marketplace adapter to connect the Integration Server to marketplaces. It enables messages to be exchanged by converting the XI message format to the marketplace format MarketSet Markup Language (MML) and the other way around.
You configure the adapter in the configuration part of the Integration Server when you define a communication channel.
To be able to send messages from marketplaces to the Integration Server, you must first configure the sender marketplace adapter.
· To be able to send messages from the Integration Server to marketplaces, you must first configure the receiver marketplace adapter. The receiver adapter supports system acknowledgments but not application acknowledgments.
· The marketplace adapter takes existing attachments into account and forwards them on.
Configuring the Receiver Marketplace Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/3b/059afabd164c4789075c9810911c14/content.htm
Configuring the Sender Marketplace Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/01/cdd3c885f29247b0bb88d4f9df0b38/content.htm
Thanks
Saiyog -
Hi Gurus,
Can anyone tell me what is SAP Market Place and who can access it and what is the basic use of SAP Market Place.
Regards.Dear,
To acces in the www.service.sap.com (SAP Market place) you will need Use ID and Password. User ID and Password are given to SAP Customers, Implementation partners and Certified Consultants.
If you want upgraded patches, SAP Notes and like you will have to visit SAP Serivce place.
Regards,
Chintan Joshi -
How to Fix the row in sap script, its urgent......
Hi Experts,
first i explain my sap script, i have print void check in my script client give readymade format means box are there, lines are there. i have to fix in box and line data form database table. everthing is working fine. i got all data. i have total 6 window in my script .but i have one issue In my sap script in header window total five rows... like below
Check voucher no:8888
check No: 1234
Date:1/28/2007
Bank:xyz
Batch no: 5678
now sometime check voucher is balnk....
Check voucher no: BLANK/NULL
check No: 1234
Date:1/28/2007
Bank:xyz
Batch no: 5678
because of that all rows are move up side and all window also move up side and so script not fix to the box and line all data are seen not perfectly... so guru`s how to fix the row and window in script....
its urgent...
Waiting for ur reply
Thanks & regards
JigarHi,
Follow the below steps . Definately your issue will bve resolved.
Let us suppose you are printing following fields
PH &v_text&
PH &v_text1&
PH &v_text2&
you will get the output as you expected.
and if you have any conditions for these fileds
/: if v_text is not initial.
PH &v_text&
/: endif
PH &v_text1&
PH &v_text2&
if you have data in each field then you will get output as expected .
But when v_text is initial.
the data will be moved up wnhich is happening in your case.
so what you need to do is?
/: if v_text is not initial.
PH &v_text&
/: else
PH (Here you need to mention empty line with same paragraph format
/: endif.
PH &v_text1&
PH &v_text2&
Reward points if useful
Regards,
Nageswar -
Email Sales order link from SAP Work Place
Dear SAP Gurus,
Well guys i have to mail the sales order link through the work place but its not working for the sales order. but its working for delivery order and billing document...so i want to know that why its not working?
Regards,
MohsinDear All,
Can u please help me on this situation? I will be very thankful to u....
Regards,
Mohsin -
Currency Decimal Places - Urgent
Hi all of you..
When earlier stage in my project , client has not told us to change the decimal places in Foreign Currency - USD.
Now client is asking to change the decimal places for 4 digits..
( Earlier 2 decimals )
Now in Global settings t.code OY06 , we are trying to change for 4 decimals , but system is changing the entire existed transaction values regd USD as for 4 decimals , data inconsistency is coming.
Is there any procedure to change the decimal places from now onwards...
Or else is there any procedure to get 4 decimals in PO..
Plss help me it is very urgent to me ..we are trying to shoot from 10 days..
Thanks & Regards
RamkiPlease read OSS note 434349 - Change of decimal places of currencies
it has instructions for your case -
Hi,
I'am working on the Hierarchical Tree structure which should have three levels, I need to have a check box in the place of the icon & if i select a node that node & the child nodes should get selected.
After this when i say move selected ( i'am trying to use picklist class also) the entire checked tree has to move to the display area to the right & should display as tree structure & after this if i save then the checked records which are moved to another text area should get saved!!
How to achieve this? I have the tree structure ready but the check box part is the worrying factor! & then moving the checked records to the right using picklist class is the second problem & finally saving records to database.
Any help in this regard will be deeply appreciated:)
If check box is not possible then i will have to look at other methods, will the tree structure allow checkboxes????
Thanks
MaheshNo the tree will not allow checkboxes
-
Error during data transfer from Lotus Notes to SAP via JCO - Urgent Help Required
Dear SAP Expert:
I need your help! Recently getting error during data transfer to SAP. I need your suggestion!
I am transferring Lotus Notes data to SAP via JCO, recently getting the below error msg, could you pls tell me what could be the reason?
Please suggest me how to fix that kind of issue.
"com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Error in ABAP/4 statement when processing an internal table. table.
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeExecute(Native Method)
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.execute(MiddlewareRFC.java:1244)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3842)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3287)
at SAPAdapter.execute(Unknown Source)
at JavaAgent.fillBapiAndWriteBackToNotes(Unknown Source)
at JavaAgent.NotesMain(Unknown Source)
at lotus.domino.AgentBase.runNotes(Unknown Source)
at lotus.domino.NotesThread.run(NotesThread.java:249)
Thanks in advance! Your help would be highly appreciated! Thanks again!error is clear, check your abap code.
-
Hi,
This is important and urgent.
I have created a benifit health plan for IT0167. The entry for this is through T-Code <b>HRBEN0001 </b>.
When I go to PA30 and make an entry by selecting the IT0167, it works fine. But this is not appearing in Enrollment (HRBEN0001). Can any one tell me how do I add the plan in here? Is there any config node that I have missed?
Please reply ASAP.
Thanks,
Vivek.
Points shall be rewarded!!!Hi Vivek
PA30 should not be used for benefits administration. Please refer to the following information from note 124934:
The eligibility rules are not checked when the user enrolls an employee to a plan using the transaction 'Maintain Personal Administration' (PA30).
Solution
Generally we distinguish between 'Plan data' and 'Administrative data'.
With plan data all information about a plan itself is meant, e.g. plan
type, cost or contribution limits, while administrative data means all
information about the EE participation in a plan (eligibility,
enrollment, programs). If persons are enrolled via PA90 (Release 3.x) or
HRBEN0000 (Releases 4.x), the consistency of both the plan and the
administrative data is checked, and e.g. enrollment is forbidden for a
person which is not eligible. However, transaction PA30 cannot exploit
the full functionality of the administrative side of the benefits
module, so that in general we do not recommend using PA30 at all. If
PA30 is used, however, we only perform the plan data check with error
messages since in this transaction only the plan data is fully and
consistently available.
In general, we advise all customers to use the Benefit transactions PA90
(Releases 3.x) / HRBEN0000 (Releases 4.x) instead of transaction PA30,
because the administrational plan data (Eligibility, Co- and
Pre-requisites, Permissions) are NOT checked in PA30.
There are two reasons why the administrative data is not checked when
using PA30:
1.) Not all Administrative Data is available in PA30. For example, it
will not be possible, anyway, to configure co-requisite plans in
PA30, because these plans cannot be created simultaneously in
PA30.
2.) Some customers may want to have a possibility to circumvent
administrative (such as eligibility) rules for enrollment
of certain employees in some special cases (e.g. an employee
with a special contract shall be allowed to participate in a
plan prior to the expiration of the eligibility waiting period).
This is not possible to be realized in the Benefit transaction,
but using PA30.
This problem may arise when the customer wants to create or update many
Benefit infotypes via Batch Input. This is only possible using PA30, so
that customers probably cannot circumvent using PA30. A possible
solution of this issue could be to remove the illegal records out of the
batch file, either by performing the checks already on creation of the
batch files or by modifying the files with a customer specific report.
Hope it is helpful
Regards,
Jun -
Confused concerning SAP XI Installation (Urgent!)
Hi,
well i am planning to install SAP XI on a client Server. But which kind of precondition is needed?!
Sure u have to install the Web AS for ABAP and Java-Stack - and for sure u need a database. But i have no clue which kind of software-package my client has. So what does he need to install SAP XI on a Linux-Server.
Do these Links give me the answer?! i didn't understand what is contained in the SR's - everything which is mentioned?! <a href="https://websmp207.sap-ag.de/~sapidb/011000358700005531212005E.pdf">Technical Guide NetWeaver 2004s</a>
To make it clear: I only have the SAP XI Software, what does my client need to install beforehand to make sure SAP XI will run and be installed properly?!
And for my understanding: if my clients has the NetWeaver2004s Package, is the Web AS, Oracle DB and SAP XI included?!
Best regards, JensHi Jens,
<i>if my clients has the NetWeaver2004s Package, is the Web AS, Oracle DB and SAP XI included</i> -Yes, NW2004s package includes Web AS, Oracle DB and SAP XI.....Just make sure that your client has the complete NW2004s package...
Thanks,
Rajeev Gupta
Message was edited by:
RAJEEV GUPTA -
How to read SAP Work place Inbox (Tcode SBWP )
Hi
I want to read the user inbox have like Documents,workflow items,deadline messages ,incorrect entries , after reading all those from inbox i want to forward to another user , Could any body tell me how to read info from Workplace Inbox and how we can forward to another user , do we have any Bapis or Functions to do this .
I appreciate you all if you could provide me information .
ThanksHi Pradeep,
you can get the workitems which is sitting in SAP users workflow Inbox through the following function module.
CALL FUNCTION 'RH_MULTIPLE_OBJ_WI_SELECT'
EXPORTING
ACT_OTYPE = 'US'
ACT_OBJID = usr_list_rs-usrid " This variable should contain user id of * the user
SEARCH_WEGID = 'US_TASKS'
SEARCH_DATE = SY-DATUM
TABLES
WI_LIST = wi_list_temp .
For ur 2nd query, take all users id from user master table & put it in Iternal table.
Next, Put the above FM inside the loop of this iternal table. For ur convenience, Pls see the below code, definitely you will get clear picture.
data: wi_list_cons like HRWFWI_L occurs 0 with header line.
data: wi_list_temp like wi_list_cons occurs 0 with header line.
loop at usr_list_rs.
CALL FUNCTION 'RH_MULTIPLE_OBJ_WI_SELECT'
EXPORTING
ACT_OTYPE = 'US'
ACT_OBJID = usr_list_rs-usrid
SEARCH_WEGID = 'US_TASKS'
SEARCH_DATE = SY-DATUM
TABLES
WI_LIST = wi_list_temp .
if wi_list_temp[] is NOT initial.
loop at wi_list_temp.
wi_list_cons = wi_list_temp.
wi_list_cons-OBJID = usr_list_rs-usrid.
append: wi_list_cons.
clear: wi_list_cons.
endloop.
clear: wi_list_temp.
refresh: wi_list_temp[].
endif. "if wi_list_temp[] is NOT initial.
endloop.
sort wi_list_cons by wi_id.
Now iternal table wi_list_cons will contain both workitem Id & user Id. Now you can easily find out that which workitem is sitting in which users SAP workflow inbox.
Please let me know if you need any further assistance regarding this.
Note:-
Please don't forget to reward points.
Thanks & Regards,
S. Manikanda. -
By mistake I ran Windows Backup/Restore with SAP services on URGENT
Dear all
What I did by mistake I ran Windows Backup/Restore with SAP services on (I stopped win sql services and SAP instance).
After restore under same circumstances I could not start istance (actually it started but after connect with saplogon dispetcher stopped).
When trying to restore 2nd time(with deleted AFGDATA1,AFGDATA2, AFGDATA3 , AFGLOG and usr under c:\ I realized I can not delete C:/usr directory (with subdrectories) as SAP services were locking some files. (i stopped services and deleted those files I have them in rcycle bin),
Can I somehow restore the systemHello Tina,
- what is the status of SAP service? can you start it? If not, what is written in application event log?
- If service can be started, are you able to start SAP system? If not, what is written in sapstartsrv.log, dev_disp and dev_w0, could you put output of them?
- which files exactly have you deleted?
I afraid that the locked files were not backup and they will not be restored in this case. Further steps depend on what the files you have deleted. -
Customer service (sap - sd) very urgent
hi sap gurus,
i would like to know the customer service process.Could any one send the material for customer service?
Points would be rewarded....
Thanks in advance...Dear Nagesh,
Building Block Guide for Customer Service:
http://help.sap.com/bp_bblibrary/500/html/J13_CSPM_EN_IN.htm
General Settings for CS
Maintenance planning plant
Maintenance planning plant to maintenance plant
Values for component item categories
Value for current date as basic date
Values for units for operation
Value categories
Cost elements to value categories
Cost key figures
Version for cost estimates for orders
Employees responsible for work centers
Warranty types
Warranty counters
Material groups
Account groups and field selection for customer
Master Data
Characteristic warranty period
Warranty
Work center
Maintenance strategy
Material
Customer Service enables you to plan and manage a wide range of service scenarios. It includes functions for processing:
Service notifications
Warranties
Service orders
Service contracts
Service quotations
Repair orders
http://help.sap.com/saphelp_erp2005/helpdata/en/3b/02953401024735e10000009b38f83b/frameset.htm
Customer Service (CS) draws on functionality from different SAP application components, in particular Plant Maintenance (PM) and Sales and Distribution (SD). For example, CS involves the planning and processing of external services, such as contracts for the maintenance and repair of equipment that a customer has either bought or rented. Maintenance planning and servicing is managed in PM; in SD you can create and maintain the relevant service contracts. Contract-related charges that are incurred in PM are passed on in the form of requests for billing in SD.
In Returns and Repairs Processing, you will find a diagram showing the typical events in the day-to-day world of customer service. It also illustrates the interplay within Customer Service of SD and PM functions.
In the following sections, you will find information on the Customer Service functions in Sales and Distribution.
Do not post duplicate threads.
Regards,
Naveen.
Maybe you are looking for
-
Looking for a DVD Player with same functionality as CyberPro Power DVD
I have just converted from PC to Mac, and love it, but have a special requirement and need some guidance. I work in TV and need to be able to preview footage shot on site that has been converted onto a DVD. On my old PC using Power DVD, after hitting
-
Is it possible to make my project exe
dear members my project is composed of 30 fmx file in addition to 60 rdf file my question is is it possible to make my project executable package (setup file that runs under winows98 or xp) and how?
-
Critique my JAXB object wrapper.
Hello Ladies and Gents, I have a question on wrapping a jaxb created class and would really like to hear your inputs. My xsd looks a bit like: <ComplexService> <ComplexObject1> <Element1></Element1> <Parameter></Parameter> </ComplexObject1> <ComplexO
-
BI content for IS-U: 0UC_DEVICE mapped to EQUNR?
Hi all, We're using the BI content data flow to load Device data from source tables EGERH and EGERS to the InfoObject 0UC_DEVICE. In this flow, the key field of both tables (EQUNR) is mapped to 0UC_DEVICE. The InfoObject 0EQUIPMENT and accompanying B
-
Cannot open form with a button
Hi folks, I'm new to Developer, so apologies. I am opening a form xxx by attaching a smart trigger of WHEN-BUTTON-PRESSED to a button by call_form('xxx'); It compiles fine, but when I evesute the form, it says errer 400010 cannot read form. Any ideas