SAP IDM 7.1 ACCESS DENIED accessing the IDM interface

Hello,
I have finished configuring my IDM 7.1 . But when i try to access to the IDM webpage it gives me
ACCESS DENIED
SERVICE IS DOWN .
And this happens despite I have gave to the user all the authorizations of the installation guide.
I tried even the function ADD USER into the identity store but still no success.
Someone of you experienced the same issue?
Kind Regards

Hello,
however your input was useful . My problem was related to the JDBC configuration . I have deleted and recreated completely the jdbc connection .
After that the error went away. I faced another error telling me " No identity stores defined for workflow" .
I used this link creating another Identity Store and everything went good.
For the ones tha could face the same problem here is the link :
http://wiki.sdn.sap.com/wiki/display/Security/NWIDM7.0-WorkingwithWorkflowsPartI

Similar Messages

Error in the module RSQL accessing the database interface

I have written the following query.
SELECT a~no
         a~hist_no
         a~chk_stat
         a~chk_date
         a~user as chk_user
         b~name as chk_by
         into corresponding fields of table hist
         from zhist as a INNER JOIN zuser as b on
         auser = bbname
         where pspnr = v_pspnr
         and   chk_no = v_chk_no.
I am getting the dump "Error in the module RSQL accessing the database interface".
Please provide me the solution.
Thanx,
Selva.

Hi,
As i have analysed your query in that you are putting the data in the internal table 'hist' which is also a standard structure and if you check in SE11 'hist' is the standard structure for 'Tablespace History' and might be because of that it is causing the problem.
Kindly check by changing the name of the internal table to tt_hist and then try.
I think that will solve the problem.
Regards,
Harsh Goel

Error saying "Error in the module RSQL accessing the database interface"

Hi,
there is a standard program available for retrieving the assets for the given cost centres on the selection screen.
Our requirement is instead of cost centre we have to retrieve the assets for the given cost centre group.
We have to find all the cost centres available on the given cost centre group and its child nodes.
For all these cost centres we will be retriving the asset history data.
So we copied the standard program into another Y program and made the changes to it.
What's happening is if we give the top most Cose centre group node there are 16000 cost centres available . while retriving the asset history data for all these cost centres an runtime error occurs in a standard program saying
"Error in the module RSQL accessing the database interface, " DBIF_RSQL_INVALID_RSQL ".
The error occurs while executing the statement Fetch Next cursor in a standard Include program.
<b>This happens only if we give huge range of data. If we give small range of data it
works fine</b>.
Can anyone help me in this by saying why it occurs and what will be the solution for this.
Thanks.

Hi camila,
The huge range is part of the query string passed to the database.
While an MP3 music gadget easily stores a gigabyte of data, ORACLE was able to increase the maxium size of a query string from 16 k to 32 k bytes in the last 5 years.
<b>Unbelievable but true!</b>
Just multiply the number of entries in the range with the field length and see where go go...
Regards,
Clemens

How can I access the IrDA Interface ?

How can I access the IrDA Interface (LABWindows/CVI) in my application to transmit data serial, for example between a Laptop and a device?

How does your IrDA interface show up in your system? (COM Port, custom device, etc.)

HT4211 Alternatives for accessing the multitasking interface ...?

Is there any other way then the "double-clicking of the home button" to access the multitasking interface ?
Like "pinching the screen" with all fingers for example ?
( I don't like clicking the home button all that much )
BabaO

Geeeezuus I thought I had checked all of that Settings/General .....
Generally though: why is it that when you're looking for something specific you never find it, despite "it" starring you right in the face !!??!
Thank you for taking the time

Accessing the local interface of an EJB

Hello.
I am using Jdeveloper 11G and it's integrated application server. Using the Jdeveloper wizards, i created a simple stateless session EJB which has both a local and a remote interface (code listed below). I then used the "Create test client" option to create a simple test client.
The way these classes and interfaces are set up by the wizards, i am using the remote interface. However, i would like to lookup the local interface and use that instead. But i just can't figure out how to lookup the local interface of the EJB. I have tried pretty much every variation i can think of but still no success. Is there anyone out there who can give me a hand? Is there a way to see the lookup name in the integrated WLS server?
My remote interface looks like this:
@Remote
public interface SessionEJB {
and the remote one:
@Local
public interface SessionEJBLocal {
And my EJB class:
@Stateless(name = "SessionEJB", mappedName = "NewTestApplication-SessionEJB")
public class SessionEJBBean implements SessionEJBLocal, SessionEJB {
My test client does this lookup that works fine:
public class SessionEJBClient1 {
public static void main(String [] args) {
try {
final Context context = getInitialContext();
SessionEJB sessionEJB = (SessionEJB)context.lookup("NewTestApplication-SessionEJB#model.SessionEJB");
}

Hi,
Your lookup in your client would look something like
SessionEJBLocal sessionEJB = (SessionEJBLocal)context.lookup("NewTestApplication-SessionEJB#SessionEJBLocal ");
The part before the # in the lookup is your mapped name from your session facade, and after the # you have your package, like com.oracle. and ending it with your local interface name.
Just remember that if your client is not actually running inside the application server container (which with the generated test client it wouldn't be, its a java standalone app with a main method), you will not be able to use the local interface, and you would have to look up remote interface. This can be done in exactly the same way as the above line of code, just replacing the local interface parts with the remote interface's. Hope this helps.
Drikus
Edited by: Drikus Britz on Jun 3, 2009 8:46 PM
Edited by: Drikus Britz on Jun 3, 2009 8:50 PM

AIF Input Parameters - How to access the form interface?

Hi Experts,
i am trying to integrate Adobe Interactive Forms in SAP Records Management, which is working quite good so far. We implemented a Service Provider which uses an Interactive Form as a document template and uses the KPro document attributes as input.
Now my problem: To implement a more generic approach, i need to automatically read the input parameters for the generated funtion module of the form. I debugged quite a lot, but i cannot find any solution. Is there a dictionary table with the name of the form and its input parameters? Or is there a method/funtion module to find out the input parameters for a specific form?
Thanks for ur support,
Jan

Hi Jan,
Perhaps function module FP_FIELD_LIST provides already the information you are looking for. It lists the fields which are required for the form context.
Otherwise you may need to use classes like CL_FP_INTERFACE(IF_FP_INTERFACE~GET_INTERFACE_DATA), which returns IF_FP_INTERFACE_DATA. Here, you could call GET_PARAMETERS, then GET_IMPORT_PARAMETERS. The structure of each parameter is of type SFPIOPAR.
How to get the interface reference? You could use CL_FP_WB_HELPER=>INTERFACE_LOAD_FOR_RUNTIME.
CL_FP_WB_HELPER=>FORM_WHICH_INTERFACE_USED returns the name of the interface for a given form.
Hope that helps.
Best regards,
Andreas

API / Webservice to access the state information of a bpel process instance

Hi,
i have a question about the ccBPM runtime API.
Is there a API or Webservice provided by SAP XI/PI, which accesses the state information of a bpel process instance.
"access" means:
1. At which activity is the current process instance located
2. Access to the context information of the process
Thanks and best regards
Di

Hi Swarup,
Thanks for your quick reply.
I designed a simple BPM process with less than 10 activities. To monitor the process running state i want to build a small AddOn instead of using the standard xi monitoring tool because of its complexibility.
Thus i am looking for some useful informations about a api or webservice provided direktly by sap, which enables me to access (read only) the state information of a process instance. for exmaple at which activity is the current process instance located?
Best regards
Di

Cannot access the Admin Consol Tasks

Hi,
When I go into the Admin Screen on SAP BPC I cannot access the Admin Consol Tasks but I can access the Web Admin Tasks and my excel is working fine.
Logoffed and retried, same problem.
Working on Version 5.1 SP4, Excel 2003.
Regards
Dean

Hi,
There can be 2 reasons for you not being able to access the Admin Tasks. I would request you to check the below things.
1. You need to check the Task Profile for your user ID and verify that you have all the necessary accesses.
2. When you login to the Admin screen, make sure that some Application is selected.
Hope this helps.

Get the current count of the client accessing the servlet

Any body can tell me how to know the information of every client that accessing my servlet after the client access the login interface.

Thanks.
But,
My mean is not know each client information. I want to know all the current client count is accessing my web application and the client do not include that
user has signed off the application nor the browser is closed by some reason. Sometime if you enter the forum, you maybe find how many people are in the forum current time? I just know all the users now accessing my web application

DBIF_RSQL_INVALID_RSQL " Error in the module RSQL accessing the database i

TYPES: BEGIN OF lty_bkpf,
           xblnr LIKE bkpf-xblnr,
         END OF lty_bkpf.
DATA: li_bkpf TYPE STANDARD TABLE OF lty_bkpf
                WITH HEADER LINE.
RANGES: lr_xblnr FOR bkpf-xblnr,
          lr_xblnr1 FOR bkpf-xblnr,
           s_bukrs FOR bseg-bukrs.
IF NOT lr_xblnr1[] IS INITIAL.
    SELECT xblnr
        FROM bkpf
        APPENDING CORRESPONDING FIELDS OF TABLE li_bkpf
        WHERE bukrs IN s_bukrs
        AND bstat = ''
        AND xblnr IN lr_xblnr1
        AND blart EQ 'SA'.
ENDIF.
s_bukrs has a single value .
lr_xblnr1 has 3000 entries and also with wild characters. ( I     CP   4903813253* ) .
the SELECT statement is going into dump with the message : DBIF_RSQL_INVALID_RSQL
" Error in the module RSQL accessing the database interface."
please suggest me alternate code to encounter this issue .
thanks,
Raghu V

Moderator message - Please search before asking - post locked
Rob

Accessing the Permission,Properties and Subscription tab with Direct URL.

Hello,
I am trying to accessing the permission tab with direct url, but i could not able to find a way to access it.
we can access this permissions tab browsing through Details - > Settings -> Permissions , the similar way Details - > Settings -> subscriptions.
But i wanted to use a single(i.e direct url) which can open these tabs.
Could you please help me on this.
Thanks
Best Regards
Manoj K

Hello,
I have resolved this issue by myself.
You can access the subscription interface directly using the below url.
http://<hostname>:<port>/irj/go/km/details/documents?isp=subscription&Standalone=true&StartPage=StandaloneDetailsPage
or
https://<hostname>:<port>/irj/go/km/details/documents?isp=subscription&Standalone=true&StartPage=StandaloneDetailsPage
And for the properties interface by using the below url.
http://<hostname>:<port>/irj/go/km/details/documents?isp=properties&Standalone=true&StartPage=StandaloneDetailsPage
For the permissions interface.
https://<hostname>:<port>/irj/go/km/details/documents?isp=permissions&Standalone=true&StartPage=StandaloneDetailsPage

Accessing router web interface

Is it possible to access the web interface from while connected to the guest ssid?

No. Guest network is separate from the main network.

Accessing to hardware interfaces

Hello to everybody,
I new to java and I am trying to get some experience. So please excuse me, if I ask something stupid. :-)
I have got some self-made electronic components that I want to use by a self-written java program. The interface should be the serial interface or the USB interface. I searched for a possibility to access both of the interfaces. I found some information, but those were not complete:
On http://hestia.hs-niederrhein.de/~gkorsch/javakurs/wn8/wn8.htm (sorry, I am German) I found an example on how to access the serial interface. But how works that under the different operating systems (Win und Linux)?
USB is the bigger problem: There are a lot of diferent libraries on the internet and I do not know the differences. Anny suggestions/reports? How about the operating systems (Win & Linux)?
Thanks in advance
Christian

here is a simple Google of Java USB
http://www.google.com/search?hl=en&q=java+usb
The first couple of articles where very informative and I think could give you at least some of what you need.

Installation SAP IDM 7.1/SAP GRC Access Control 5.3

Hello,
I can install Access Control products with Solution Manager, Enterprise Portal... But it is possible to install Access Controll 5.3 and IDM 7.1 on the same server?
Thanks and best Regards
Alexander

Hi Alexander,
SAP IDM 7.1 is still in the ramp up state. as per the product availability matrix [pam|https://websmp104.sap-ag.de/~form/handler?_APP=00200682500000001303&_EVENT=DISP_NEW&00200682500000002804=01200314690900001014] , I am not yet sure if SAP IDM is available for 64 bit servers.
SAP GRC AC 5.3 should be installed on as java netweaver
server after properly sizing. If your hardware can support sizing for both GRC AC 5.3 and SAP IDM 7.1 , then you can install both on them. usually netweaver 7.0 sp12 will be in 64 bit system.
You can get GRC AC 5.3 sizing information from [link|http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000071612&_SCENARIO=01100035870000000112&_OBJECT=011000358700000435122007E]

I keep getting this error in Dreamweaver when I am trying to upload my website? Can you tell me what I am doing wrong? here is the error message: /html - error occurred - Unable to create remote folder /html. Access denied. The file may not exist, or

I keep getting this error in Dreamweaver when I am trying to upload my website? Can you tell me what I am doing wrong? here is the error message: /html - error occurred - Unable to create remote folder /html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured. File activity incomplete. 1 file(s) or folder(s) were not completed. Files with errors: 1 /html

Nobody can tell you anything without knowing exact site and server specs, but I would suspect that naming the folder "html" wasn't the brightest of ideas, since that's usually a default (invisible) folder name existing somewhere on the server and the user not having privileges to overwrite it.
Mylenium

SAP IDM 7.1 ACCESS DENIED accessing the IDM interface

Similar Messages

Maybe you are looking for