SAP industrial solution for Mining (IS-Mining)

Dear Experts,
I believe that SAP has industrial solution for Mining (IS-Mining). Do they have BW analytics / Reports for the IS-Mining ?
Appreciate an early response.
Thnx n Rgrds
Mohan
Edited by: Mohan Kumar on Nov 4, 2008 7:39 AM
Edited by: Siegfried Szameitat on Nov 5, 2008 10:12 AM
Edited by: Mohan Kumar on Nov 6, 2008 1:26 PM
Edited by: Mohan Kumar on Nov 6, 2008 1:26 PM

Can some one pls reply on this.
Edited by: Mohan Kumar on Nov 17, 2008 6:05 AM

Similar Messages

SAP industrial solution for Aerospace & Defence (IS-AD)

Hi,
We are implementing MRO as part of IS_AD with a specific focus on the Logbook that is generated. I have found the content on the BI side as well as all the relevant DataSources, but for some reason they are not visible in RSA5 or cannot be activated in SBIW or anywhere else for that matter. I realize that it could be an arbitrary question, but does anyone know where the DataSources on the ERP side is so that i can replicate them?
Please advise...
Thank you,
Cas

Thanks for all the views, but no replies...
I found the answer. If you need to know where they are, contact me and i will gladly share the info with you.

Industry Solution for High Tech Manufacturing - how to activate?

Hello,
I'm Basis consultant installing ECC 6.0 at a client site. The client company has purchased a package from SAP that includes the " SAP Industry Solution for High Tech Manufacturing ."
My question is: how is this installed? Is this part of ECC-DIMP, and thus can be activated after installation of ECC. If so, can this be activated and tested in a newly created client copy, or does the activation need to take place prior to a client copy?
If not part of ECC-DIMP, does this purchase refer to Best Practices for High Tech, which does require additional software. In this case I believe I will need to install the Baseline package for BP, then the specific BP for High Tech.
Follow-up question:
1. Could either of these be installed later, or would that break existing new configuration?
Thanks in advance for your help!
Glen

Hi Glen, I just saw your posting from two months back and wondered if you had gotten your answer, and if by saying that the client had purchased a package from SAP that includes the " SAP Industry Solution for High Tech Manufacturing ", did they mean SAP Best Practices for High Tech?
Please let us know if you have any questions,
Marian

Difference between SAP/APO/DP and the SAP/CRM solution for forecasting

Hi,
Can you please help me identifying the main differences between SAP/APO/DP and the SAP/CRM solution for forecasting? Advantages and disadvantages?
Thanks a lot

Hi LCD777,
Forecasting at DP & CRM are altogether at different entities. CRM involves webbased data transfer mechanism tool whereas DP is database/livecache driven tool.
In CRM, you dont get optimised solution of forecasting out of it whereas in DP you can get as much as
optimised solution & flexibility as per your requirements.
DP is majorly a forecasting tool where in huge statistical method functionalities are embedded in
whereas CRM is majorly a transactional tool wherein it involves gathering of forecast data and executing it.
Typically, CRM will be integrated with DP containing GATP environment & ECC so that DP will plan for forecast data, ECC system drives sales order data & GATP calls for availability check and finally
the forecast execution& transactions will be controlled by CRM
Regards
R. Senthil Mareeswaran.

SAP PM solution for already running environment .

Hi ,
I am in the process of proposing the SAP PM solution to the client which already running SAP MM FICO and SD modules .
There will be no further redesigning of MM , FICO to accommodate PM .
can you guys share your experience on this kind of scenario.

There won't be much difference in implementing SAP PM solution for the client who is running SAP currently when comparing to New Implementation of all modules.
Here, you can't have comfort of defining on all the dependent configurations as per your wish. You have to use the existing one.
You have to make use of existing Organizational Structure (Plant) to define Maintenance Plant & Planning Plant. You have to use existing G/L and OBYC settings to accommodate your Materials.
If no Valuation Class (G/L) has been defined for Spare Parts, then you may need to discuss with FICO Consultant / Finance Department on using existing Valuation class & Specific G/L in OBYC settings.
But that OBYC settings for Materials should cover Goods Issue as well as Goods Receipt postings from PM order for the desired valuation class.

How can we configure or use SAP industry solution in ECC IDES

Hi
Hope all are fine and having a nice time. i have read almost all posts relating to above topic, i want to ask from you people, is there any way to use multiple industry solutions in IDES system? because IDES is a learning solution not production and it should open all learning areas. I have seen mant posts but transaction "SFW5" doesn't fullfill our requirements.

Thanks a lot Bill for your kind answer
i would like to know that how can we active desire IS during IDES installation? because while we install ECC IDES, there is no option to active desired IS. by default it set to FI/CX.
Thanks
Usman Tufail

SAP HA solution for existing environments

Hi,
We have an existing running ECC 6.0 system with ABAP stack(NUC), which we recently upgraded. We are in the design phase for making this system Highly available (HA). I went through the installation guide, which talks about HA. The guide refers to HA configuration from fresh installation perspective. Has anyone does this before or has any idea/documents about how to make an existing environment HA.
Thanks for your help.
Jitendra

Hi,
Yes, you need to follow that method to convert it to HA.
Further you can check below link:
http://www.sdn.sap.com/irj/sdn/ha?rid=/webcontent/uuid/b09d53ac-8b0f-2b10-6798-ecfd55894839 [original link is broken]
Thanks
Sunny

SAP IDES Scenarios for IS-OIL & Supply Chain Managment

Hello,
Will anyone share the link / where can i get SAP IDES business Scenarios for SAP IS-OIL & Supply Chain Management (SCM)
PV

Hello All,
I am looking for link SAP IDES Solutions for Model Company for SAP IS-OIL & SCM modules,
Similar to: please go through the below link
SAP Library - IDES - The SAP Model Company
with all scenarios with transactions clearly
https://help.sap.com/saphelp_46c/helpdata/en/a9/fc4f35dfe82578e10000009b38f839/content.htm
PV

Does SAP provide framework for statistical calculations ?

Hi all,
Does SAP provide any framework for statistical calculations ?...The reason for asking this question is, in order to calculate the BSUoS (Balancing Services Use of System ) charges.
There is a need to calculate the amount to levy charges for use of the Electricity transmission system. For that there are some statistical calculations need to be done.
Please let me know, if SAP provides solutions for such requirements.
Any information on this requirement is helpful.
Sample Calculations:
IBCd = u03A3j d CSOBMjd + BSCCVjd + NI jd +TLjd + BSCCAd u2212OMd u2212 RTd
FYIncPayINTd = (PT int u2212 FSOINTd ) * SF int
and so on.
Regards,
Sairamakrishna Kante
Edited by: sairamakrishna kante on Aug 6, 2008 8:26 AM

Hi,
I understood your requirement as, you would like to have a pre-configured set for every business process like sales, returns etc... These pre-configured solution r available in SAP in terms of BC set, more information you can get in the SAP Best practise (http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm) wer for every business process you can install the building block which SAP has created.
Regards
Mani

Non MSCS HA Solution for Win 2008 /SQL 2008

Hello Team
Is there a NON MSCS solution out there for doing HA in Windows? SQL Environment. So far the HA use cases that I have seen are based on MSCS , However I would like to know if there is an SAP support solution for NON CLUSTERED (NON-MSCS) setup for HA. E.g.: Considering the route of SQL DB Mirroring, and would like to know possible solutions for CI to be able to reconnect to the secondary DB Host in case of Hardware Failover of Primary DB Host.
Please point me to the right documentation repository for possible Win/SQL HA Scenarios. The standard Install Guide did not provide the details that we are looking for.
Any hits and directions are very much appreciated. VMware Solutions ?
Thanks,
Uday

Hi Uday,
Yes, there's SAP support for SQL DB mirroring. You can check the note 965908 - SQL Server Database Mirroring and SAP Applications
Additionally, read the statement in the note 106275 - Availability of SAP components on MS Cluster Service
Alternative cluster solutions
Alternatively, other forms of clustering/high
availability are also possible but installation and support
must be provided by the SAP HA solution or implementation partner.
SAP only supports the standard configurations detailed above on Windows and
reserves the right to require that other high-availability solutions be deactivated
when support is required
Best regards,
Orkun Gedik

SAP best practices for mining

Hi,
We are implementing SAP best practices for mining for our system ECC 6.0.We have installed the addon component BP-INSTASS V1.600 .Also as per the document we require the note 1044589 which is not found.Now we are unable to proceed on this.Kindly suggest.
Regards,
Max

Hey Max,
If installation guide is saying that and you are unable to locate this note.
Kindly create a request with SAP. I am also unable to locate that Snotes.
Regards
Vivek

SAP Solution for Mini steel plant with DRI Process

Dear all,
I am a metallurgist who spent couple of years in steel and process Industry and then moved to IT Consulting as SAP consultant / business analyst mainly working in the area of solution designing.
Here i will like to describe SAP solution for Mini steel plant with DRI proces.
u201CManufacture Productsu201D Description
The series of operations performed upon material to convert it from the raw material or a semifinished state to a state of further completion. This includes the establishment and maintenance of a CAPEX plan, the planning, scheduling and execution of production activities, the dispositioning of produced goods, the maintenance of production data, the monitoring of production performance and the implementation of engineering changes.
u201CManufacture Productsu201D Objectives
M-010
Compile 3-year CAPEX Budget     Establish the overall manufacturing goals and metrics that the organization will use to measure performance and progress towards objectives. These goals should be consistent with overall organizational strategy/value propositions. Develop long-term goals for production capabilities and manufacturing. These goals should align with the overall goals and objectives of the organization.
M-050
Perform Long Range Production Planning     u201CBudgetingu201D. Long range planning of production quantities based on planned available capacities and known or estimated customer demands. This process may include planning for different capacity and/or demand scenarios. Approved capital expenditures from the 3-year CAPEX budget may influence the budget. Range and frequency for budgeting is yearly.
M-060
Perform Medium Range Production Planning     Medium range planning of production quantities based on planned available capacities and known or estimated customer demands. This process may include planning for different capacity and/or demand scenarios. Range and frequency for planning is quarterly.
M-070
Perform Short Range Production Planning     Short term planning of production quantities based on capacities and demands as previously planned in the longer terms, actual customer demand and actual capacities. The result from short range production planning will run into the operational plan for the current and following days. Range and frequency for planning is monthly.
M-080
Schedule Production     This sub-process enables detailed scheduling by resources over the planning horizon. Planned orders that fulfill demands (Stock Transfer Requisitions, Sales Forecasts and Customer Orders defined by due-dates and due-quantities) come from the short range plan. This results in a feasible schedule, optimizing utilization of the production resources. It is based on production process constraints as well as labor resources in order to minimize production costs and also taking into account constraining raw materials availability.
M-090
Execute MRP     The purpose of this sub-process is to generate a Materials Requirements Plan (MRP) for all materials, which are produced or purchased. The MRP process involves looking at current material inventory, planned inbound material deliveries, requirements, lead times and stock levels to generate a detailed plan for future material requirements. The materials requirements will be generated with respect to the three planning horizons, short-term, medium-term, and long term. If an over stock of raw materials occurs as a result of a planning change production and marketing personnel will be informed. This would allow for the cancellations of any unneeded shipments.
M-100
Perform Setup / Changeover     Perform set-up and changeover activities on production equipment as necessary, to prepare for the production of specific materials/grades. Set-up and changeover activities will enable the production equipment to perform operations on materials, as per the specifications called out on the production order. Ensure time is allocated for first off inspection requirements after changeover.
M-110
Execute Production     Insure that the production plan is met by converting raw materials and component supplies into finished and semi-finished products. Batch/lot documentation will be created for individual production orders to provide traceability throughout the process. Each step of the production process is continuously monitored to identify mechanical, quality, and productivity issues and suggest solutions when problems arise. Data collection for performance and financial reporting enables management to take immediate action on manufacturing processes as well as conduct historical analysis.
M-120
Perform Quality Management     Quality management refers to the entire supply chain process. Process activities are related to the evaluation and inspection of key characteristics of semi-finished and finished materials. These evaluations are recorded and acted on based on the results. Report/manage internal quality problems or issues. Install and manage quality control systems to insure product quality. For supplier or subcontractor based issues this data should be used as a performance measure during the vendor evaluation process.
M-130
Manage Product Disposition     This process ensures those semi-finished and finished products that do not meet quality requirements, are prevented from being used and distributed in good finished product to customer, or released for the next step of the production process. A semi finished product is any material that needs to have another operation on line before being shipped to the customer. Finished goods are defined as any material that can be shipped to a customer; in house produced finished goods, subcontracted materials and trading goods. The information required to make decisions regarding disposition comes from the Quality Management system of each production facility. The first step ensures that raw material and returnable goods are dealt with in another subprocess. The reason for the goods not meeting quality standards is recorded along with the results of any investigation to find the cause of the fault. Information is sent to all other parties who need to know: order fulfillment, inventory management and shipping. The process ensures that the most appropriate action is taken to either dispose of, or rework the goods. Disposal or rework may be either through the original materials supplier or subcontractor, or Mittal Steel Point Lisas.
M-140
Maintain Product Related Data     u201CMaterial Master Maintenanceu201D. The Sub-Process 'Maintain Product Related Data' is the list of activities that identify the steps and decision points related to the request for and performance of additions, changes, and deletions to the Material Master file or files. This sub-process begins when a need to create, change or delete a material is identified and ends when the request is either actioned or refused. The sub-process is intended to cover all material types, including finished goods, raw materials, bills of materials, equipment and service, POS, Sundry Items etc. In fact, any product which the company wishes to inventory or purchase. A number of key strategic decisions, including a clear definition of when we issue a new material, will affect this sub-process.
M-150
Maintain Production Related Data     u201CMaster Data Maintenanceu201D. This subprocess identifies the activities related to requesting changes or additions to production related master data. Once a need for master data maintenance is identified, a request is submitted for approval. Data defining production capacities and performance standards (e.g. line efficiencies, material yields, etc.) require Corporate level approval prior to maintenance. Other data that is more specific to internal planning functions are maintained at the plant level. Maintenance requests are returned to the originator whether the request is approved or not to improve communication throughout the system. This subprocess may be triggered by: annual operations budgeting process process/production equipment upgrade or replacement change in facility work schedule (i.e. planned hours or days) change in personnel required to operate process/production equipment new products, formulations, or packaging.
M-160
Operations Execution Reporting     Gather manufacturing information at various points in the production process. Prepare management reports both at the detailed level for plant management and summary level for senior operations management. Reports will be available on-demand and will include - volume, efficiencies (mechanical, line, and labor), yields, downtime, asset utilization, environmental, safety, quality, and financial data. A major goal of this sub-process is to define a consistent method of calculating operations metrics. Some plants will use line information systems and PCSs to collect information. Not all plants are equipped with these systems and the where they do exist, the level of sophistication varies.
M-170
Manage Process Reliability     Optimize capacity by reducing process downtime and ensuring compliance to quality expectations by the reduction of rejects. Install tracking systems to measure line time utilization, quality results, process settings. Conduct root cause analysis, and use the data to develop and implement improved operating procedures.

Thank you for your prompt response. I'm assuming you are still proposing to use Sales order -> purchase order -> invoice verification -> Customer billing process flow. Is that correct?

Install Files Determination for "SAP Learning Solution" from SolMan

Hi Experts,
is it possible to determine what installation files one should download from Market Place to install the "SAP Learning Solution"?
A colleague of mine should install the "Learning Solution", and he asked me how can we identify the needed files in SolMan, so we could download them and install.
I looked in DSWP, and all I could find was Maintenance Optimizer, but that functionality can just identify the needed files for maintaining of already installed systems.
I wasn't able to find any info on SAP Support Portal either.
Can anyone point me in right direction?
Thanks,
Cheers,
Nenad

Dear Nenad,
Have you checked http://service.sap.com/swdc
Download
> Installation and Upgrade
>>My Company Applications
>>>SAP ERP
>>>>>Select Version
>>>>>>Select OS
>>>>>>>Select DB
You should be able to find the files there.
Regards,
Paul

Business Packages for SAP Learning Solution

Hi All,
I need to upload the Business Package for SAP Learning Solution in EP 7.0
Can anyone give me a link to download the Business Package for SAP Learning Solution.?
Regards,
Eben.

Hi Eben,
For EP 7.0, you would have to go for BP for Learning 1.0.
From service market place :
https://websmp101.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=DISPHIER&HEADER=Y&FUNCTIONBAR=N&EVENT=TREE&V=MAINT&TA=ACTUAL&TMPL=01200615320200008111
But this BP apart there are a couple of other things that you would have to take into consideration like the add-ons on the backend (ECC) system.
Check list :
http://help.sap.com/saphelp_erp2005/helpdata/en/bc/1f6f740510aa43bb74e2d415b31c57/content.htm
Refer to the online documentation here.
http://help.sap.com/saphelp_erp2005/helpdata/en/65/a3a73b6594fc26e10000000a11402f/frameset.htm
Hope this helps.
Cheers,
Sandeep Tudumu

Is SAP offers solution consultant certfication for MDM 3.0 now?

Is SAP offering Solution Consultant Certification for SAP MDM 3.0?
i came to know from the link
https://websmp204.sap-ag.de/~sapidp/011000358700000588612005D
certification is planned for this second quarter for mdm 3.0.
just i want to know whether SAP offers solution consultant certification for MDM 3.0 for this year?
Thanks for reply,
cg

Since the current release is MDM 5.5., I guess this information is not up-to-date.
Regards, Markus

SAP industrial solution for Mining (IS-Mining)

Similar Messages

Maybe you are looking for