SAP Logon GUI - WSAECONNREFUSED: Connection refused
I try to connect to the Application Server (IP Address), System Number (00) and System ID (APC) but get the following error:
Sapgui 710 [Build 9003] Tue Sep 08 06:24:47 2009
: 'partner '10.0.103.217:sapdp00' not reached
Time Tue Sep 08 06:24:45 2009
Component NI (network interface)
Release 710
Version 39
Module nixxi.cpp
Line 3142
Method NiPConnect2: 10.0.103.217:3200
Return Code -10
System Call connect
Error No 10061
Error Text WSAECONNREFUSED: Connection refused
Counter 1
Hi Chris / Dalma,
The issue is with the C:\Windows\System32\drivers\etc\services entries.
Do add your samps<SID> port/TCP entris.
also the all relevant entries.
sapdp00 3200/tcp
This should resolve the issue.
also Do verify your instance number and maintain the right Instance number in SAP GUI. Let us know if this helps.
Regards,
Ram
Similar Messages
-
Random "WSAECONNREFUSED: Connection refused" error
hello,
we're connecting to sap using logon groups and randomly we get this error
<i>TmConnect2: handle = 0
sncname = []
set snc-mode OFF TmISncSetOptions: set tm_mode for 0 to TM_SNC_OFF
disp service: sapdp00
TmIGetName: no DISPLAY set
NiMyHostName: hostname = 'APP006-2'
terminal name: APP006-2
connect to dispatcher on host /H/127.0.0.1/S/3201
RouteString </H/127.0.0.1/S/3201>
service in route <3201> != servname param <sapdp00>
NiIGetServNo: servicename '3201' = port 3201
NiICreateHandle: hdl 3 state NI_INITIAL_CON
NiIInitSocket: set default settings for new hdl 3/sock 1144 (I4; ST)
NiIBlockMode: set blockmode for hdl 3 FALSE
NiITraceByteOrder: CPU byte order: little endian, reverse network, low val .. high val
Wed Sep 26 16:59:12 2007
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2985]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 3/sock 1144
(SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3201) [nixxi.cpp 2985]
NiICloseHandle: closing initial hdl 3
ERROR => TmIConnect: NiConnect (rc=-10) [dpxxtm.c 934]
TM_LAYER TmConnect <<
TmErrSet: socket invalid (-1)Wed Sep 26 17:00:52 2007
NiICreateHandle: hdl 4 state NI_INITIAL_CON
NiIInitSocket: set default settings for new hdl 4/sock 1624 (I4; DG)
NiDgHdlCreate: state of hdl 4 NI_DG_UNCONNECTED
NiHsLGetNodeAddr: got hostname 'localhost' from operation system
NiIGetNodeAddr: hostname 'localhost' = addr 127.0.0.1
NiDgHdlSendTo: hdl 4 sent 1 of 1 bytes to 127.0.0.1:0
NiICloseHandle: shutdown and close hdl 4/sock 1624
NiIExit: free nitab 0C0AF150
TmThrExit: free local resources
TmExit: free local resources</i>
i can't figure why sap gui is trying to connect to 127.0.0.1 ???
and after a while it works without any modification... very strange no? but annoying!
if i do not use logon group and connect directly it works but it is not what i need to do.
any idea?
regardshello,
thanks but configuration of logon groups is very straightforward...
my logon group contains my two application servers.
what else do i have to check?
regards -
Connect to message server host failed;WSAECONNREFUSED: Connection refused
Hi All,
I am getting the following error when I tried to test the system connectivity from the portal to NSP instance.
Connection failed. Make sure that Single Sign-On is configured correctly
I found the following entry in the logs
Error> occured >Wed Feb 03 22:43:49,875<
RfcException:
message: Connect to message server host failed
Connect_PM TYPE=B MSHOST=abchome.abcsap.local GROUP=SPACE R3NAME=NSP MSSERV=sapmsNSP PCS=1
ERROR partner '192.xxx.xxx.123:sapmsNSP' not reached
TIME Wed Feb 03 22:43:49 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 1
Return code: RFC_FAILURE(1)
error group: 102
key: RFC_ERROR_COMMUNICATION
Both NSP and J2E instances are on the same server. OS - win2k3.
I checked the services file and have the sapmsNSP entry.
I am able to launch an SAP transaction from System Administration -> Support
RZ70 from NSP also fails JCo error. SLD_UC RFC itself works fine and the JCo RFC provider SLD_UC program is running
WEB AS & ITS connections work fine.
User authentication is from backend, NSP.
I think I have gone thru all the logs but could not resolve the issue.
I appreciate any help on this,
VictorI tried to go thru the thread. I did not find any clue as why only server connectivity is failing. ABAP trial version is running fine and the NW trial version is working fine too. These run without crashing. I did a lot of customizing on the portal but dont see any issues except the System Connectivity. Like I mentioned I did UME configuration to point to NSP ABAP instance and I can log into the portal with user credentials that I use to login to ABAP. I can launch webgui etc without any issues.
-
WSAECONNREFUSED: Connection refused
i am trying to access my newly installed system after i have performed a client copy and it gives the following error
partner not reached (host 192.167.1.3, service sapdp03)
WSAECONNREFUSED: Connection refused
here is the detailed error log
Time: Tue Apr 17 12:19:48 2007
Component: NI (network interface)
Release 640
version 37
Module nixxi_r.cpp
Line NiPConnect2
Return Code -10
System Call SiPeekPendConn
Error No 10061
Error Text WSAECONNREFUSED: Connection refused
Counter 1Hi..
i strongly beleive , After a client copy you are not able to connect sounds, You oraarch directory is full and database is not accepting any incoming requests from application. (or) Dispatcher is stopped.
if you are sure - you have done no changes on server end except using SAPGUI i.e. client copy - The only reason i feel - ORAARCH is FULL.
if it is not the reason
======
can you ping the server ?? if yes
As ora<SID> user Check - is db is up or not ??
As ora<SID> user Check - listener status ??
As <SID>adm user check - "R3trans -d" what is the return code ??
if return code is 0 no issues with DB connection ??
if return code other than "0" enclose trans.log file (it will be created in directory where "R3trans -d" executed.
also enclose dev_disp trace file from work directory.
if this answers - Please mark it as answered.
Regrds
PR -
SAP GUI (SAP LOGON 620).Problem connecting to R/3
Hi I Installed SAP 4.7 successfully.I could see SAP R3 Management console started properly.After Installing SAP GUI,I tried to connect from SAP Logon.I get an error ,A box opens
Which has title 'Syntax Errors'
and fields in the box are,
Syntax error in program -
in include -
in line -
Last changed by -
Author -
Any help on this would be greatly appreciated.I tried to google but could not find any reasonable answer.
I also tried to connect to R/3 from other box but the same result
Thanks in advance
DurgaMantosh,
I dont see any user defined on my logon pad.All I see Proerties,Groups,Server,New,Delete.
Manas,
Still no luck.I changed as adviced by bu still I get 'Sytax Errors' window.
Here is my SAPLogon pad after the changes you suggested.
[Configuration]
SessManNewKey=4
[MSWinPos]
NormX=38
NormY=71
[Router]
Item1=
Item2=
[Router2]
Item1=
Item2=
[RouterChoice]
Item1=0
Item2=0
[Server]
Item1=10.10.10.12
Item2=SR1
[Database]
Item1=00
Item2=
[System]
Item1=3
Item2=3
[Description]
Item1=sap 4.7d
Item2=SAP 4.7E
[Address]
Item1=
Item2=
[MSSysName]
Item1=SR1
Item2=
[MSSrvName]
Item1=
Item2=
[MSSrvPort]
Item1=sapmsSR1
Item2=
[SessManKey]
Item1=3
Item2=2
[SncName]
Item1=
Item2=
[SncChoice]
Item1=0
Item2=0
[Codepage]
Item1=1100
Item2=1100
[CodepageIndex]
Item1=-1
Item2=-1
[Origin]
Item1=USEREDIT
Item2=USEREDIT
[LowSpeedConnection]
Item1=1
Item2=0 -
ERRNO TEXT WSAECONNREFUSED: Connection refused
Hi,
I am facing a problem with sap gui 6.4. I cant connect to sap server with sap gui it return a error connection refused and partner not reached. It just suddenly show this error today but before this it work fine. The server is working fine.Hi,
First ping ypur server and see if it is possible.
in run type ping <ip>of your server> -t.
If this works
Put the IP of the server instead of server name in the Application server tab of the logon settings.
If the ping do not works pl check out for network problems.
Hv a look at Note 545177 - FAQ: Preliminary steps in analyzing RFC connections
Pl revert if unresolved or award suitably if resolved.
Regards -
Portal - BI, sapdp00 not reached, WSAECONNREFUSED: Connection refused
Hello,
I have a problem with the connection between portal 7.0 and bi 7.0. I want to logon into the bi over the portal.
The bi and the portal are on the same host. It´s an ABAP + Java installation.
1. I created the connection in the portal
System Administration -> System Configuration -> SLD
I chose New -> System (from PAR) -> SAP_R3_Dedicated
Then I gave follow parameters:
Application Host: http://
I hope anyone can help me to solve the problem.
Thanks a lot!
MarcelI tryed some other constellations betwen Portal and BI.
In the first post both systems are on the same server.
s1 = server 1, s2 = server 2
1. try
BI = s1
Portal = s1
browser = s1
result = it works
2. try
BI = s1
Portal = s1
browser = s2 (or an other PC)
result doesn´t work
3. try
I have a second portal on an other server
BI = s1
Portal = s2
browser = s2 (or an other PC)
result doesn´t work
4. try
the second portal but the browser on the server with the bi
BI = s1
Portal = s2
browser = s1
result = it works -
ABAP Netweaver 7.0 Trial wont connect to SAP Logon
I just installed the ABAP Netweaver trial and for some reason am getting the following error when I try to connect from the login gui:
partner '127.0.0.1:sapdp00' not reached
WSAECONNREFUSED: Connection refused
I get the following error when I click the icon for Start Application server:
The Service name is invalid
More help is available by typing NET HELPMSG 2185
The system cannot find the path specified
=======Start database failed!
Press any key to continue
When I am in MMC and click on Start, I am prompted for a Username and password which doesnt work.
5/24
The syslog is displaying the following:
SAP-Basis System: Stop Msg Server, PID 1292
SAP-Basis System: Start Msg Server, 1 times since system startup. PID 1292
SAP-Basis System: Buffer SCSA Generated with Length 4096
Operation trace: New System Log File Started with Number 0
Edited by: David Kupratis on May 24, 2008 8:28 PM
Edited by: David Kupratis on May 24, 2008 8:32 PMHi,
insert into the file C:WindowsSystem32driversetcservices the item:
sapmsNSP 3600/tcp
Perhaps you have to reboot the server.
Kind regards,
Günther -
SAP NW 2004s ABAP Trail - Connection refused - question?
Hi!
I instalad "minisap" or better say - SAPNW2004sABAPTrail,
first SAP server, then GUI, on Win 2003 platform, the installation was fine,
but when trying to connect GUI to the server, all I get is error (see below),
although I follow the instructions on how to specify server
(with SSID "NSP", Server ID = 00, and on "localhost"),
please help with this, and yes, I did install Microsoft Loopback adapter,
this is the the error message I'm getting:
partner not reached (host 127.0.0.1, service sapdb00)
WSAECONNREFUSED: Connection refused
Do you want to see detailed error description?
YES NOhi,
check the file HOSTS in C:\WINDOWS\SYSTEM32\DRIVERS\ETC
is there an entry like
127.0.0.1 localhost
and also check the file "services" with all entries with sapdp* and sapgw* -
Connection Refused SAP 4.7 IDES
Hello Experts,
I have OS windows 2003 server. I installed SAP 4.7E IDES long back,it was working well. But suddenly the following Problem arised,
In SAP R3 Management Console Root , its dispalying "There is no item to show in this View"
The SAP Logon Description is:
Description = SAP 4.7
Application server = 200.200.200.20
sap router string =
Syastem ID = ERP
system no = 00.
SAP Syatem = R/3
Whenever I am going to start sapgui to saplogon then the follwing Error message is coming without starting the appliaction server.
Sapgui640
Partner not reached(host 200.200.200.20, service sapdb00)
WSAECONNREFUSED: connection refused.
Plz help me regarding this...
Thanks....Hello. are your database Oracle? If yes the version are? Dependent on version you can use SAPDBA or Brtools, or both in one time.
http://help.sap.com/saphelp_47x200/helpdata/en/3e/5e123b4a4eca10e10000000a114084/content.htm
Try to check START>RUN>CMD-->BRTOOLS (before login in your OS under SIDadm user).
Try to check dev_w0 file in "work" directory.
Regards. -
After portal copy "connection refused" for SAP transactions
Hi.
We made a system copy of Portal and executed all follow up tasks.
We already changed systems alias properties and tested connections.
All is working except SAP transactions functionality.
When we try to use, we always get message:
patner '10.0.0.132:sapdp00' not reached.
WSAECONNREFUSED: Connection refused.
Curious thing is: the system we are trying to reach use system number 10 (not 00).
We look for this parameter value in every part, on portal configuration, and all seems to be perfect.
We are without options, and we don't know what is missing/wrong.
May anyone help us to find this solution?
Best regards.
VreeswijkHi,
From portal on which backend system you are running transaction and Is portal able to reach that system ?
Thanks
Sunny -
Hi SAPRouter-experts!
<b>I have a problem to establish OSS1-connection, to ping sapserv3 (147.204.2.5) --> time out error, and to configure saprouter.</b>
Here the developer trace from ST11
RSTR0006 - Anzeige der Entwickler-Traces
1
trc file: "dev_lg", trc level: 1, release: "700"
[Thr 7656] Sun Jun 17 13:58:57 2007
[Thr 7656] ***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED:
Connection refused) [nixxi.cpp 2764]
[Thr 7656] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 0 /
sock 1876
(SI_ECONN_REFUSE; I4; ST; 192.168.177.10:3299) [nixxi.cpp 2764]
[Thr 7656] *** ERROR => MsIAttachEx: NiBufConnect to
/H/192.168.177.10/S/sapdp99/H/192.168.147.101/S/sapdp99/H/147.204.2.5/S/sapdp99/H/oss001/S/sapmsO01/x
failed (rc=NIECONN_REFUSED) [msxxi.c 6
[Thr 7656] *** ERROR => LgIAttach: MsAttach (rc=NIECONN_REFUSED)
[lgxx.c 3980]
[Thr 7656] *** ERROR => LgApplSrvInfo: LgIAttach(rc=LGEMSLAYER) [lgxx.c
1272]
[Thr 7656]
[Thr 7656] * ERROR partner '192.168.177.10:sapdp99' not reached
[Thr 7656] *
TIME Sun Jun 17 13:58:57 2007
[Thr 7656] * RELEASE 700
[Thr 7656] * COMPONENT NI (network interface)
[Thr 7656] * VERSION 38
[Thr 7656] * RC -10
[Thr 7656] * MODULE nixxi.cpp
[Thr 7656] * LINE 2764
[Thr 7656] * DETAIL NiPConnect2
[Thr 7656] * SYSTEM CALL connect
[Thr 7656] * ERRNO 10061
[Thr 7656] * ERRNO TEXT WSAECONNREFUSED: Connection refused
[Thr 7656] * COUNTER 1
[Thr 7656] *
[Thr 7656]
<b>Can you tell the procedure to fix all the prooblems?</b> Tnak you very much!
regardsHi!
Thank you!
BUT, I am talking about the OSS1-issue in SOLMAN.
Unfortunetaly I can not ping to sapserv3 or open ftp with sapserv3..
I completly installed the latest version of Saprouter, installed the service in Windows, have run ltgt.exe...
<b>How can I establish the connection with SAPRouter? Is there some Network limitations? </b>
Thank you! -
Netweaver trial version - Connection refused
Hi.
When I log into my sap gui for windows 720 trial version - i am not able to connect to the server. the following error message appears.
partner : 127.0.0.1:sapdp00 not reached.
WSAECONNREFUSED : connection refused
pl advice as how to disable the firewalls as i am using windows home premium os and norton antivirus and logon sucessfully.Hi,
Check the following:
- In the SAP Management Console, is the system running(green).
- Have you installed the Loopback adapter
- Disabled Windows firewall via Control Panel -> System and security -> Firewall
- Also Norton might have its own firewall and blocking the SAP ports. Disable and retry.
Regards,
Srikishan -
Hi all!
I've run into a problem while trying to interact with SAP via .NET Connector. Really, this problem occurs even when I try to login via SAP GUI.
I receive the following error message
partner not reached (host msk-krf5pzoq4, service sapdp00)
Time Thu Jun 21 11:33:15 2007
Component NI (network interface)
Release 640
Version 37
Module nixxi_r.cpp
Line 8672
Method NiPConnect2
Return Code -10
System Call SiPeekPendConn
Error No 10061
Error Text WSAECONNREFUSED: Connection refused
Counter 13
In SAP MMC I have all green lights.
I have installed MS Loopback adapter and configured its IP
Hosts file looks like this:
127.0.0.1 localhost
10.10.0.10 msk-krf5pzoq4
Firewalls are disabled.
I have clean virtual machine with Win2k3 SP1 without any other software except NW 04s SP 16 Sneak Preview (I had not installed patch EP6KMC16P_2-10002972.sar located at the distr package). I had not modified anything since I had installed it. All is by default. I believe that system id is J2E and system number is 00. In any case I have tried other possible values. My host name (msk-krf5pzoq4) contains 13 symbols, I think that is allowed.
When I am trying to create server in SAP GUI I recieve 'Message server could not find any applicaion server' error, though ALL lights in SAP MMC are green and I am able to logon to SAP NW AS web management interface (http://localhost:50000/nwa). Also, I have no 'SAP Netweaver 2004s' item in Start menu, only MMC console. Maybe I should install something else?
I am stucked for 2 days with the problem(Hi Ivan,
As you mentioned, it is possible to connect to <a href="http://localhost:50000">http://localhost:50000</a>. Go there and choose System Information. Log in and on the information page you will see the required message server port to connect to the system via Visual Studio.
As I wrote, there is no possibility to connect via SAP GUI.
Regards,
Klaus -
What are the requirement for sap logon...
HI expert ,
i am working on remote site and i want install sap logon i have a hostname ,sap roting string system id , and instance no.i configured it but i am not able
connect to application server message showing...
partner sap routstring ip(115.115......:3299 not reached
time
component-ni
release720
version40
module-nixxi.cpp
line-3286
method-nipconnect
return code
error no 10061
error text wsaeconnrefused connection refused
counter -7Hello Ashish,
then you may need to check the router string carefully if it is correct. "connection refused" in your error message means, that either the program is not running and not listening to the port 3299 on the affected server, or connection data are wrong. Do you have a SAProuter trace and did SAProuter notice in the trace, that you are trying to connect to it?
regards,
Alwina
Maybe you are looking for
-
How to copy and paste text from email to a memo pad or browser?
what is the gesture to highlight and copy and paste a selection of text from an email message to another destination. I have a URL that is now showing up as a hyperlink and I need to cut and paste it out of the email. the two finger gesture from the
-
Can default TV Output be set to PAL?
Hi, whenever I connect the TV Out cable to any of my devices (IPhone 4, IPhone 4s and IPad 2) they invariably forget my last settings and revert to NTSC. Since I live in Europe I have to change the settings to PAL. Doing so manually everytime is very
-
Unable to create page in a project
Hi, I am designing a new search page page on a table FWK_TBX_EMPLOYEES(Later on I will extend it to include record addition functionality).I Have defined simple EO and VO on FWK_TBX_EMPLOYEES table and have also defined an Application Module.Now when
-
when we specify EXIT keyword in the "start-of-selection" then the control is teminating the program..i mean the rest of the code is not getting executed. when EXIT statement is declared then the control shud come out off the current loop and execu
-
Compare 2 bmp-files ad notice the different?!
Hello, I want to compare tow bmp-files, how can I do it? That is so, I get 2 similar BMP files, they have only some small differences, how can I compare these 2 BMP files by dissolving or Pix in LabVIEW , and then notice the difference place on the B