SAP note 105621 -- Hiding Cost Conditions in Sales Document

dear experts:
  i am facing a issue regarding SAP Note 105621. in this note it says we need to implement user exit
USEREXIT_FIELD_MODIFICATION
USEREXIT_FIELD_MODIFIC_LEER
USEREXIT_FIELD_MODIFIC_KZWI                         
USEREXIT_FIELD_MODIFIC_KOPF
USEREXIT_PRICING_CHECK
and create 2 new Include ZZAUTH01, ZZAUTH02.
my questions are:
1. are these user exits listed above in program LV69AFZZ?
2. I set break point in these user exits, but none of them stop the process when i run t-code VA02.
i am confused here, could anyone tell me how to get into these exits when run VA02?
THANKS.
Hongtao

hi GSL,
the configurations for this note is not done yet, and i just want to dubug into these eixt. but i don't why the process can not come into those exits.
and there are 5 exits and 2 incldes, do we need to implement them all?
thank you very much for your response.
regards,
hongtao

Similar Messages

  • Automatic determination of header condition in sales document

    Hi Friends,
                    How can we make a header condition automatically determined in a sales document ?
    Regards
    Mahesh

    Hi Mahesh,
    You can use the condition supplements to automate the header condition.   Please note that the condtion supplement procedure should consist of the Header condtion types. 
    Lets assume that you want to automate HB00 and RB00.  Then for PR00, you should assign condition supplements procedure PR0000.  This procedure should carry HB00 and RB00.  Then while maintaining condition record for PR00, click condtion supplements and maintain rate for HB00 and RB00 as well. 
    Once you create order, you can see HB00 and RB00 getting picked up automatically.
    Thanks & regards,
    CLN

  • Sales value in FD33 is not matching with the system's sales documents

    Dear Experts,
    Kindly provide your valuable inputs for the below mentioned issue-
    I have one customer X ( Same for all Partner functions) defined for CCA say CN01( Risk cat, update group 000012). The applicable credit check is STATIC check, with open orders and Open delv. are ticked + Oldest open items= 10 days.
    There are two open sales oders amounting 49,854.40 CNY. Customer has the credit limit as 50,000 CNY.
    Now We have found, that the FD33 is also showing SALES VALUE as 249. CNY and split of Sales Value shows the 249 as Open billing Doc. But we could not get any Open Billing Document  that is amounting to 249.
    We have checked it in S067 ( showing 249), ran the pgm RVKRED88/RVKRED77 but Still this 249 value is appearing.
    We have found that there are two open billing Doc. - One invoice and one credit for returns in relation to same Sales cycle. Both amounts to 212.85 CNY each.
    Now i am unable to get the information as How can i check this Difference?
    Kindly suggest accordingly.
    Many thanks in advance for your understanding.

    Dear All,
    Let me give you the finding that i have got for my case:
    1. If you go to FD33, what is the value in field "Sales Value"? (any changes?)
    Sales value= 249
    2. In VA05N, choose SP, Document date & Open Orders; check for values matching the outstanding value (249)
    No values are coming in VA05
    3. Which other document types have the same Credit Group, you can check this in VOV8, check the sales doc types you are using for your business processes.
    There are a few sales doc. types that are assigned the same credit group. But what to infer from this?
    4. You say in your post "split of Sales Value shows the 249 as Open billing Doc." where exactly can you see this split?
    I have searched from Extra tab, also checked the same in other sales report say vc/2 .
    =================
    1. Check the Tcode: FBL5N to check open items
    FBL5N: Only one entry , exactly equals to the Receivables value in FD33
    2. FD33 - check oldest Open items - clik on extra - oldest open items
    No Oldest open items
    3. also check F.35 report
    Fur ther if you want to go into details what are the checks applied to your sales order you can track this by running the report CHECK_CM by using Tcode: se38 OR sa38.
    1. se38,
    2. Enter the report CHECK_CM
    3. Press F8
    4. Enter COC Number
    5. here you can see the entire credit status of Sales order either it block or not if block what are the credit check applied you can see and you also can see either its blocked - B or released - D by looking the status.
    What is COC number, I have tried to execute , and there are options of Sales Document number, I have put the input as The BILLING DOCUMENT THAT ARE HAVING STATUS " NOT POSTED TO FI" In Vf05, but it appeared"Please check the entries. No work list selected"
    I am not getting any clue as why THE OPEN BILLING DOC. value is 249, over and above the receivables value, and in system I could not find the Documents which sum up to 249.
    Kindly provide the inputs.
    Thanks in advance.

  • Conditions of sales document

    Hello everybody,
    I have two exclusive conditions types:
    ZTGE and ZTC
    ZTGE transfers its value to subtotal E (xworke)
    ZTC transfers its value to subtotal D (xworkd)
    For material M1 ZTGE is determined:
    ZTGE - 1,05
    For material M2 ZTC1 is determined and ZTGE is marked and inactive:
    ZTGE - 1,6  (inactive due to exclusion)
    ZTC -  1,5
    The problem appears in the pricing conditions of the header data of the sales document:
    ZTGE - 1,05
    ZTGE - 1,5   (inactive)
    ZTC - 1,5
    In this case xworke = 1,05 + 1,5 = 2,55.
    I'd want xworke to be 1,05!!!!
    How can I avoid the value of an inactive condition being transferred to a subtotal?
    Thanks

    Dear Alberto,
    You can transfer an inactive condition to a subtototal by making it statistical.
    Just make the statistical tab effective in the pricing procedure and you will be able to do that.
    Regards,
    Rakesh
    p.s. award point if you find it useful

  • Manage two invoice posting for one price condition in sales document

    Hello Experts,
    I am a new user in SD module especially for billing and pricing part, and i have a specific requirement from my client that i cannot find the solution. Could you please help if you have any idea to resolve the following situation:
    I have a plant in UK which create a sales order for a customer X for a material M with a specific amount.
    For the invooice creation, the goal is to create two invoices:
    - One with net value billed in USD,
    - one with GBP to bill the tax.
    I tried to use billing plan, and i was able to generate the 1st invoice without tax through pricing procedure that don't manage Tax condition, however i am blocked when trying to generate the second invoice that contains only the tax.
    Do you have any idea how can it be managed?
    Thanks for help
    I can add more clarification if needed.
    Thanks

    Hello,
    Thanks for feedback.
    In fact the Customer master data currency is USD, and company code is in UK so it is GPB.
    The target is for some business case the customer is invoiced with Net value in USD, and the tax will be invoiced in GBP.
    But the problem is that i cannot manage two currencies and two invoices for one price condition.
    So I am wondering what is the best solution, How i can generate two output types for the same price condition.
    I tried to set up pricing procedure without tax, to manage the Net value, in first line of the billing plan.
    But i am not able to generate a seconde line with only the tax condition.
    DO you think that is possible?
    Thanks

  • Center cost for item sales document

    It is possible open the field cost center into item of a sales docoment? If it is, how can i do it?
    Thanks.

    Need to work on user exit MV45AFZB in  FORM USEREXIT_COBL_RECEIVE_VBAP. Have the code to show the cost center here.
    Hope it helps
    Regards
    Sai

  • Text is not copied from Customer masterdata to sales document header

    Hi Friends,
    Text was maintained in customer masterdata, that should be copied in to sales order header. In Quality server its working as per requirement. But in production its not copied from customer master data.
    Same configuration settings are in production as well as quality(VOTXN)
    Please suggest me regarding this

    Hi Durga,
    Please go to SD> Basic function > text control> Define and Assign Text Determination Procedures and in that screen, check the customer sales and distribution change view customer sales text and sales note for customer and its assignment .
    I hope these will be helpful for you.
    Regards,

  • Exclude condition from sales order when minimum  vale not  reached

    Hello,
    what  would  be  the  best  way  to  exclude/include  the  freight  cost  condition  from  sales order  when  minimum  order value  is  not  reached?
    Thanks and  best regards
    L

    Hi,
    If you want to be it should be automatically then follow what RAM KI suggested, but without much more work you want do it manually then do as suggested below
    Use the field USAGE at header >> under Sales tab
    Create table with combination of Sales orgz and usage fileld and generate table
    Assign this generated table to access sequence which is used in your frieght condition
    Configure two usages as FRIEGHT include and FRIEGHT Exclude
    Maintain condition record for the frieght condition with above combination
    Now when you create sales order go header level and select usage as you select usage system will pull values from condition record for frieght.
    kapil

  • Note - 105621

    i want to restrict the user to see the cond. type "VPRS"
    i mean as per the auth. only the user can see the VPRS amt.
    i am workin as per SAP note 105621.
    Have created the auth. obj. and the auth. profiles as per the Note
    and assigned them to the required users in SU01
    But my problem is that the Note says to use the user exits:
    USEREXIT_FIELD_MODIFICATION
    USEREXIT_PRICING_CHECK
    USEREXIT_FIELD_MODIFIC_LEER
    USEREXIT_FIELD_MODIFIC_KZWI
    USEREXIT_FIELD_MODIFIC_KOPF
    I am confused as to which user exit to use and what logic to put in
    Any inputs on the same.?
    Rgds

    Dear,
    You can restrict/ hide the condition type VPRS in transaction VA02 & VA03 using -
    Include Program: LV69AFZZ , in section USEREXIT_FIELD_MODIFICATION.
    Best Regards,
    Amit
    Note: Also, refer following thread:
    Re: Condion Type "VPRS" should not appear in Sales Order, Inquiry, Contract

  • Costing update in sales order

    they get the consumption of sales using customized transaction
    actual cost is zero
    user create the material master withot pricing
    we ask to update the material master and they do the costing run
    in material master standard costing estimate found
    after they  run the consumption report ,once again actual cost is zero
    i chech\ked in  costing status using CK11N ,std cost estimate found
    is it  possible to update the cost in sales order
    (redetermine or recalculate the pricng in sale order)
    so that my consumpotion report will update
    thanks
    Edited by: Suresh Kumar on Jul 26, 2011 4:59 PM

    Hi Suresh,
    I hope ur doing MTO Scenario.
    for this u need not do standard cost estimate.
    during sales order creation VA01 > extras tab > Costing. u can do costing for each customer aganist each sales order.
    not for each product.
    for do it u need to maintin some of the settings .Check Requirements Classes .
    if u maintain Costing ID              B Automatic costing and marking.
    in requirement tab if u maintain these settings when ever u save sales order it calcutes sales order cost estimate and released automitically.
    thanks
    kareem

  • Condtion record  automatically not fetched up (Mandatory condition)

    Hi all,
    condition record  automatically not fetched up (Mandatory condition) in sales order level. tax condition record. i have 2 clients in previous client also having same table combination. is there any chance to overwrite the condition records. If i have so many condition records in this previous client shall i delete and created new client. pls clarify this doubt, help me in this regard.
    babu

    Hello Nagul,
    There can be many possiblities on why the values of Condition record record defined as Automatic are not picking up the values. There are few pointers below and kindly have a look on the basis of these:
    1. If the condition types are not mandatory but are defined as automatic, then you save a SALES ORDER. In the display mode of the Sales Order you can check the actual reason on why price are not being picked for those CONDITION TYPES in pricing analysis.
    2. Also you can check the validity of those condition record, whether this has expired !!
    3. Check any requirements are attached to the Condition Type or Access sequence.
    Please update your post after checking these above pointers !!
    Regards,
    Sarthak

  • Office 2007 documents integration - SAP Note 1062725

    Hi,
    the SAP note regarding the comtability of Office 2007 - documents is gone. Why is that? Has it become irrelevant? Well, we still have this problem and I don't know what to do...

    Hi Danny,
    The note is currently in status 'Released for Customer' so it should be available at:
    [1062725|http://service.sap.com/~form/handler?_APP=01100107900000000342&_EVENT=DISPL_TXT&_NNUM=1062725]
    Regards, Lorcan.

  • Issue With Sales Document Type in BW.

    Dear Experts,
    I am facing an Issue with Sales Document Type(Object name is 0DOC_TYPE).
    when i am loading data from R/3 to BW It is converting Sales Document type as follow
    Sales Document Type in R/3                         Sales Document Type in BW
    OR                                                                        TA
    CR                                                                        G2
    DR                                                                        L2
    I check with an ABAPer and he told that there is conversion exit for this Object so that's why it is converting when sending to BW. But the user wants to see in Report same as it is in R/3 like OR, CR DR ... etc.
    I have done some investigation and found that the conversion exit (CONVERSION_EXIT_AUART_INPUT and CONVERSION_EXIT_AUART_OUTPUT) are converting the values based in the table TAUUM
    The staructure of TAUUM is
    MANDT(Client)  SPRAS(Language) AUART(Sales document type (not converted)   AUART_SPR(Language key for sales document type)
    and values are
    100 E TA OR
    100 E G2 CR
    etc....
    The same Conversion exits(CONVERSION_EXIT_AUART_INPUT and CONVERSION_EXIT_AUART_OUTPUT) and table TAUUM are available in BW as well. So i thought I can Use InfoObject 0DOC_TYPE by changing it's conversion Routine as AUART(which runs based on the above mentioned conversion exits).
    but the the problem is table TAUUM(Pool Table) does't have any data in BW.
    So can anyone tell me is there any option to load data into table TAUUM from R/3 or any other option to solve this issue.
    Your ideas will really help's me.
    Thanks in advance,
    Dara.

    Hi Venkat,
    Thanks a lot for your immediate response.
    The InfoObject 0DOC_TYPE was without conversion exit by default. but when data coming from R/3 it is converting and sending to BW So that's why i am planning to use conversion exit "AUART" in the info Object.
    I checked data in R/3 using RSA3 it is showing sales document type as "OR" and for the same transaction data when i checked in PSA it is showing as "TA".
    Could you please let me know if there any other options.
    Thanks in advance,
    Dara.

  • To view the reference sales document of a deleted delivery

    Is there a table in SAP where I can see the reference sales document of a deleted delivery?
    Or is there a way that I can see the reference sales document of a deleted delivery.

    I dont think it is possible to track sale order reference for a deleted delivery through standard tcode.  Of course, you can see the deleted delivery details in MB51.
    thanks
    G. Lakshmipathi

  • PS1 Sales Document Type

    Hello Experts
                 I am not able to find out PS1 Sales document type in VOV8. We are on ECC 5.0 .Any Customization task has to be done or is there any other alternative Document type
    Thanks a lot in Advance.
    Regards,
    Shareeq,
    Dubai.
    Message was edited by: Shareeq
            K M AHAMED SHAREEQ HUSSAIN

    Not Answered

Maybe you are looking for