SAP on OS400
Hi,
we've installed mySAP ERP 2004 on OS400 (V5R3)/DB400. After installation, when i checked system performance avarage response time seems to be nearly 2 seconds and most of the time is spent in DB access. Neary %70 of avarage response time.
So i started to think about configuring DB400 to run better. Is the any recommendation about performance settings of OS400 or DB400. Also is there any mechanism like Optimizer Statistics on DB400?
regards
Hi Volker,
Here is the details you requested. Hope helps you to help us.
Model 520
1 cpu 1.9 power5+
4 GB Ram
OS V5R3
WRKSYSSTS result
Work with System Status SAPDEMO
22/05/06 13:01:03
% CPU used . . . . . . . : 0,0 Auxiliary storage:
% DB capability . . . . : 0,0 System ASP . . . . . . : 422,9 G
Elapsed time . . . . . . : 00:00:01 % system ASP used . . : 29,7165
Jobs in system . . . . . : 1194 Total . . . . . . . . : 422,9 G
% perm addresses . . . . : 0,007 Current unprotect used : 8732 M
% temp addresses . . . . : 0,019 Maximum unprotect . . : 9593 M
Type changes (if allowed), press Enter.
System Pool Reserved Max -
DB----- -Non-DB-
Pool Size (M) Size (M) Active Fault Pages Fault Pages
1 187,25 100,35 +++++ 0,0 0,0 0,0 0,0
2 3137,40 1,67 30 0,0 0,0 0,0 0,0
3 434,90 0,00 10 0,0 0,0 1,8 2,7
4 0,25 0,00 5 0,0 0,0 0,0 0,0
Similar Messages
-
Is it possible to read the user in a user defined fuction in a PI mapping?
I am running PI 7.0. I have a service call to the HTTP adapter on my Integration Engine to initiate a message. I would like to capture the username used to connect to the HTTP service when this message was called.
The call is initiated with the endpoint http://<myhost>:<http port>/sap/xi/engine?type=entry&sap-user=THISUSER&sap-password=MyPassword&version=3.0&Sender.Service=MyBServ&Interface=MyNamespace^MyInterface
When I look at the message in the RWB, I can see that the username is captured as part of the SOAP Header, in the RunTime area of the input message,
<!-- Inbound Message -->
<SAP:RunTime>
<SAP:Date>20101216</SAP:Date>
<SAP:Time>102057</SAP:Time>
<SAP:Host>myhost</SAP:Host>
<SAP:SystemId>xxx</SAP:SystemId>
<SAP:SystemNr>xx</SAP:SystemNr>
<SAP:OS>OS400</SAP:OS>
<SAP:DB>DB400</SAP:DB>
<SAP:Language/>
<SAP:ProcStatus>000</SAP:ProcStatus>
<SAP:AdapterStatus>000</SAP:AdapterStatus>
<SAP:User>THISUSER</SAP:User>
Is there a way that I can return this username in a User Defined Function (UDF)?You have to make use of the ASMA....dynamic configuration....sap-user will be a URL paarmeter....check point4 from this help section: http://help.sap.com/saphelp_nwpi711/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm
(sould be applicable for PI7.0 also)
Regards,
Abhishek. -
RFC connection from SAP R/3 to OS400 server
Hi,
I am trying to establish an rfc connection between an R/3 system and OS400 server.
I dont have much experience on communication interfaces i have seen different options in SAPRFC.ini file but still i wanted to get some expert comments from the experts.
Please help me on this.
Thanks
Junaid.Hi,
We had the same scenario here also. You can call .NET code from ABAP program using SAP .Net connector.
The data can be downloaded to SQL server based on periodic job wise (every Half an hour or 1 Hour) .
1. Write an ABAP report to get new personnal numbers from HR master tables based on created date.
2. Create a RFC to pass employees details.
3. You can create a proxy in .NET server stub code based on the above RFC.
4. Write code to get data .NET object and establise a connection to SQL server.
5. Write code to push data into SQL server tables.
6. After you complete the .NET code, when you generate this code will create an exe file.
7. You have to execute that exe with few command line arguments.
8. The command line arguments need to setup in RFC destination (SM59).
9. In that ABAP report call this RFC with RFC destination as you defined.
.NET code can be done by .NET person.
Let me know if you have any clarifications.
Thanks & Regards,
Govind. -
SAP on V6R1 - ABAP Import:Program 'Migration Monitor' exits with error code
Hello,
We are doing an installation of SAP NW 7.01 SR1 on V6R1.
<br>
We were getting error in SAPAPPL2.TSK.bck we merged the files with following command:R3load --merge_only <TSK file> and refering sap note:Note 455195 - R3load: Use of TSK files.
<br>
We are again getting error in following steps:
<br>
sapinst.log
<br>
<br>WARNING 2009-09-30 23:25:28.477
Execution of the command "Y:\QOpenSys\QIBM\ProdData\JavaVM\jdk14\64bit\bin\java -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 OS400 ppc64-64 j9ap64142sr13-20090310 (JIT enabled)
J9VM - 20090309_31291_BHdSMr
JIT - 20090210_1447ifx1_r8
GC - 200902_24)
I<br>mport Monitor jobs: running 1, waiting 27, completed 0, failed 0, total 28.
<br>Loading of 'SAPNTAB' import package: OK
<br>Import Monitor jobs: running 0, waiting 27, completed 1, failed 0, total 28.
Import Monitor jobs: running 1, waiting 26, completed 1, failed 0, total 28.<br>
Import Monitor jobs: running 2, waiting 25, completed 1, failed 0, total 28.<br>
Import Monitor jobs: running 3, waiting 24, completed 1, failed 0, total 28.<br>
Loading of 'DOKCLU' import package: OK
Import Monitor jobs: running 2, waiting 24, completed 2, failed 0, total 28.<br>
Import Monitor jobs: running 3, waiting 23, completed 2, failed 0, total 28.<br>
Loading of 'SAPAPPL1' import package: OK
Import Monitor jobs: running 2, waiting 23, completed 3, failed 0, total 28.<br>
Import Monitor jobs: running 3, waiting 22, completed 3, failed 0, total 28.<br>
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 2, waiting 22, completed 3, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 21, completed 3, failed 1, total 28.<br>
Loading of 'DD03L' import package: OK
Import Monitor jobs: running 2, waiting 21, completed 4, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 20, completed 4, failed 1, total 28.<br>
Loading of 'SCPRSVALS' import package: OK
Import Monitor jobs: running 2, waiting 20, completed 5, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 19, completed 5, failed 1, total 28.<br>
Loading of 'SAPSDIC' import package: OK
Import Monitor jobs: running 2, waiting 19, completed 6, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 18, completed 6, failed 1, total 28.<br>
Loading of 'SCPRVALS' import package: OK
Import Monitor jobs: running 2, waiting 18, completed 7, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 17, completed 7, failed 1, total 28.<br>
Loading of 'SAPSSRC' import package: OK
Import Monitor jobs: running 2, waiting 17, completed 8, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 16, completed 8, failed 1, total 28.<br>
Loading of 'FUPARAREF' import package: OK
Import Monitor jobs: running 2, waiting 16, completed 9, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 15, completed 9, failed 1, total 28.<br>
Loading of 'TODIR' import package: OK
Import Monitor jobs: running 2, waiting 15, completed 10, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 14, completed 10, failed 1, total 28.<br>
Loading of 'SEOSUBCODF' import package: OK
Import Monitor jobs: running 2, waiting 14, completed 11, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 13, completed 11, failed 1, total 28.<br>
Loading of 'E071K' import package: OK
Import Monitor jobs: running 2, waiting 13, completed 12, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 12, completed 12, failed 1, total 28.<br>
Loading of 'SAPPOOL' import package: OK
Import Monitor jobs: running 2, waiting 12, completed 13, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 11, completed 13, failed 1, total 28.<br>
Loading of 'SAPSPROT' import package: OK
Import Monitor jobs: running 2, waiting 11, completed 14, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 10, completed 14, failed 1, total 28.<br>
Loading of 'SAPSDOCU' import package: OK
Import Monitor jobs: running 2, waiting 10, completed 15, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 9, completed 15, failed 1, total 28.<br>
Loading of 'SAPCLUST' import package: OK
Import Monitor jobs: running 2, waiting 9, completed 16, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 8, completed 16, failed 1, total 28.<br>
Loading of 'SAPSLOAD' import package: OK
Import Monitor jobs: running 2, waiting 8, completed 17, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 7, completed 17, failed 1, total 28.<br>
Loading of 'SAPSLEXC' import package: OK
Import Monitor jobs: running 2, waiting 7, completed 18, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 6, completed 18, failed 1, total 28.<br>
Loading of 'SAPUSER' import package: OK
Import Monitor jobs: running 2, waiting 6, completed 19, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 5, completed 19, failed 1, total 28.<br>
Loading of 'SAPDDIM' import package: OK
Import Monitor jobs: running 2, waiting 5, completed 20, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 4, completed 20, failed 1, total 28.<br>
Loading of 'SAPDFACT' import package: OK
Import Monitor jobs: running 2, waiting 4, completed 21, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 3, completed 21, failed 1, total 28.<br>
Loading of 'SAPDODS' import package: OK
Import Monitor jobs: running 2, waiting 3, completed 22, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 2, completed 22, failed 1, total 28.<br>
Loading of 'SAPUSER1' import package: OK
Import Monitor jobs: running 2, waiting 2, completed 23, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 1, completed 23, failed 1, total 28.<br>
Loading of 'SAP0000' import package: OK
Import Monitor jobs: running 2, waiting 1, completed 24, failed 1, total 28.<br>
Loading of 'SAPAPPL0' import package: OK
Import Monitor jobs: running 1, waiting 1, completed 25, failed 1, total 28.<br>
Loading of 'SAPSSEXC' import package: OK
Import Monitor jobs: running 0, waiting 1, completed 26, failed 1, total 28.<br>
<br>
WARNING[E] 2009-09-30 23:25:28.524
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log,
<br>
ERROR 2009-09-30 23:25:28.914
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
<br>
<br>import_monitor.log.
<br>****************************************************************************************************************************************************
<br>INFO: 2009-09-30 23:26:33 com.sap.inst.migmon.LoadTask run
Loading of 'SAP0000' import package is successfully completed.
<br>
INFO: 2009-09-30 23:30:31 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0' import package is successfully completed.
<br>
INFO: 2009-09-30 23:31:16 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is successfully completed.
<br>
WARNING: 2009-09-30 23:31:31
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2009-09-30 23:31:31
1 error(s) during processing of packages.
INFO: 2009-09-30 23:31:31
Import Monitor is stopped.
<br>*************************************************************************************************************************************************
<br>SAPAPPL02.LOG
<br>**************************************************************************************************************************************************
<br>TVV1 in *LIBL type *FILE not found. MSGID= Job=015908/SAPINST/QJVAEXEC
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) INFO: TVV1 created #20091001110304
<br>
(DB) INFO: TVV1 deleted/truncated #20091001110304
<br>
(IMP) INFO: import of TVV1 completed (0 rows) #20091001110304
<br>
(DB) ERROR: DDL statement failed<br>
(ALTER TABLE "TVV1" DROP PRIMARY KEY )<br>
DbSlExecute: rc = 99<br>
(SQL error -539)<br>
error message returned by DbSl:
Table TVV1 in R3E04DATA does not have a primary or unique key. MSGID= Job=015908/SAPINST/QJVAEXEC
Your inputs will help a lot.
Regards,
PrasadHello,
We are doing an installation of SAP NW 7.01 SR1 on V6R1.
<br>
We were getting error in SAPAPPL2.TSK.bck we merged the files with following command:R3load --merge_only <TSK file> and refering sap note:Note 455195 - R3load: Use of TSK files.
<br>
We are again getting error in following steps:
<br>
sapinst.log
<br>
<br>WARNING 2009-09-30 23:25:28.477
Execution of the command "Y:\QOpenSys\QIBM\ProdData\JavaVM\jdk14\64bit\bin\java -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 OS400 ppc64-64 j9ap64142sr13-20090310 (JIT enabled)
J9VM - 20090309_31291_BHdSMr
JIT - 20090210_1447ifx1_r8
GC - 200902_24)
I<br>mport Monitor jobs: running 1, waiting 27, completed 0, failed 0, total 28.
<br>Loading of 'SAPNTAB' import package: OK
<br>Import Monitor jobs: running 0, waiting 27, completed 1, failed 0, total 28.
Import Monitor jobs: running 1, waiting 26, completed 1, failed 0, total 28.<br>
Import Monitor jobs: running 2, waiting 25, completed 1, failed 0, total 28.<br>
Import Monitor jobs: running 3, waiting 24, completed 1, failed 0, total 28.<br>
Loading of 'DOKCLU' import package: OK
Import Monitor jobs: running 2, waiting 24, completed 2, failed 0, total 28.<br>
Import Monitor jobs: running 3, waiting 23, completed 2, failed 0, total 28.<br>
Loading of 'SAPAPPL1' import package: OK
Import Monitor jobs: running 2, waiting 23, completed 3, failed 0, total 28.<br>
Import Monitor jobs: running 3, waiting 22, completed 3, failed 0, total 28.<br>
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 2, waiting 22, completed 3, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 21, completed 3, failed 1, total 28.<br>
Loading of 'DD03L' import package: OK
Import Monitor jobs: running 2, waiting 21, completed 4, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 20, completed 4, failed 1, total 28.<br>
Loading of 'SCPRSVALS' import package: OK
Import Monitor jobs: running 2, waiting 20, completed 5, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 19, completed 5, failed 1, total 28.<br>
Loading of 'SAPSDIC' import package: OK
Import Monitor jobs: running 2, waiting 19, completed 6, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 18, completed 6, failed 1, total 28.<br>
Loading of 'SCPRVALS' import package: OK
Import Monitor jobs: running 2, waiting 18, completed 7, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 17, completed 7, failed 1, total 28.<br>
Loading of 'SAPSSRC' import package: OK
Import Monitor jobs: running 2, waiting 17, completed 8, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 16, completed 8, failed 1, total 28.<br>
Loading of 'FUPARAREF' import package: OK
Import Monitor jobs: running 2, waiting 16, completed 9, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 15, completed 9, failed 1, total 28.<br>
Loading of 'TODIR' import package: OK
Import Monitor jobs: running 2, waiting 15, completed 10, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 14, completed 10, failed 1, total 28.<br>
Loading of 'SEOSUBCODF' import package: OK
Import Monitor jobs: running 2, waiting 14, completed 11, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 13, completed 11, failed 1, total 28.<br>
Loading of 'E071K' import package: OK
Import Monitor jobs: running 2, waiting 13, completed 12, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 12, completed 12, failed 1, total 28.<br>
Loading of 'SAPPOOL' import package: OK
Import Monitor jobs: running 2, waiting 12, completed 13, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 11, completed 13, failed 1, total 28.<br>
Loading of 'SAPSPROT' import package: OK
Import Monitor jobs: running 2, waiting 11, completed 14, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 10, completed 14, failed 1, total 28.<br>
Loading of 'SAPSDOCU' import package: OK
Import Monitor jobs: running 2, waiting 10, completed 15, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 9, completed 15, failed 1, total 28.<br>
Loading of 'SAPCLUST' import package: OK
Import Monitor jobs: running 2, waiting 9, completed 16, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 8, completed 16, failed 1, total 28.<br>
Loading of 'SAPSLOAD' import package: OK
Import Monitor jobs: running 2, waiting 8, completed 17, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 7, completed 17, failed 1, total 28.<br>
Loading of 'SAPSLEXC' import package: OK
Import Monitor jobs: running 2, waiting 7, completed 18, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 6, completed 18, failed 1, total 28.<br>
Loading of 'SAPUSER' import package: OK
Import Monitor jobs: running 2, waiting 6, completed 19, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 5, completed 19, failed 1, total 28.<br>
Loading of 'SAPDDIM' import package: OK
Import Monitor jobs: running 2, waiting 5, completed 20, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 4, completed 20, failed 1, total 28.<br>
Loading of 'SAPDFACT' import package: OK
Import Monitor jobs: running 2, waiting 4, completed 21, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 3, completed 21, failed 1, total 28.<br>
Loading of 'SAPDODS' import package: OK
Import Monitor jobs: running 2, waiting 3, completed 22, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 2, completed 22, failed 1, total 28.<br>
Loading of 'SAPUSER1' import package: OK
Import Monitor jobs: running 2, waiting 2, completed 23, failed 1, total 28.<br>
Import Monitor jobs: running 3, waiting 1, completed 23, failed 1, total 28.<br>
Loading of 'SAP0000' import package: OK
Import Monitor jobs: running 2, waiting 1, completed 24, failed 1, total 28.<br>
Loading of 'SAPAPPL0' import package: OK
Import Monitor jobs: running 1, waiting 1, completed 25, failed 1, total 28.<br>
Loading of 'SAPSSEXC' import package: OK
Import Monitor jobs: running 0, waiting 1, completed 26, failed 1, total 28.<br>
<br>
WARNING[E] 2009-09-30 23:25:28.524
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log,
<br>
ERROR 2009-09-30 23:25:28.914
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
<br>
<br>import_monitor.log.
<br>****************************************************************************************************************************************************
<br>INFO: 2009-09-30 23:26:33 com.sap.inst.migmon.LoadTask run
Loading of 'SAP0000' import package is successfully completed.
<br>
INFO: 2009-09-30 23:30:31 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0' import package is successfully completed.
<br>
INFO: 2009-09-30 23:31:16 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is successfully completed.
<br>
WARNING: 2009-09-30 23:31:31
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2009-09-30 23:31:31
1 error(s) during processing of packages.
INFO: 2009-09-30 23:31:31
Import Monitor is stopped.
<br>*************************************************************************************************************************************************
<br>SAPAPPL02.LOG
<br>**************************************************************************************************************************************************
<br>TVV1 in *LIBL type *FILE not found. MSGID= Job=015908/SAPINST/QJVAEXEC
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) INFO: TVV1 created #20091001110304
<br>
(DB) INFO: TVV1 deleted/truncated #20091001110304
<br>
(IMP) INFO: import of TVV1 completed (0 rows) #20091001110304
<br>
(DB) ERROR: DDL statement failed<br>
(ALTER TABLE "TVV1" DROP PRIMARY KEY )<br>
DbSlExecute: rc = 99<br>
(SQL error -539)<br>
error message returned by DbSl:
Table TVV1 in R3E04DATA does not have a primary or unique key. MSGID= Job=015908/SAPINST/QJVAEXEC
Your inputs will help a lot.
Regards,
Prasad -
Unable to login: SAP System Message: Dynpro does not exist
Hello All,
I'm created a test system to practice our upgrade post steps on. I created a pared down copy of one of our other systems. When I try to login, I get a popup message saying: Dynpro does not exist.
To create the pared down version, we used empty files for:
COEP
GLPCA
BALDAT
MSEG
BSIS
LIPS
LTAP
CE1LPOC
ZHYPFIT
BALHDR
VBFA
COSP
COSB
CDCLS
ZHYPF2A
/IRM0760
CDHDR
COSS
CMFP
CHVW
RESB
ZHYPFIO
AUSP
VBOX
JCDS
VBAP
We don't think these being empty is the problem, but I wanted to mention it just incase it is.
Below is the dev_w0 log. I've been searching Google / SDN / OSS for some of the errors but haven't come up with anything yet.
Any insight you might have into this would be appreciated. Thank you.
~TJ
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
M sysno 79
M sid Q60
M systemid 324 (IBM iSeries with OS400)
M relno 7000
M patchlevel 0
M patchno 172
M intno 20050900
M make: single threaded, Unicode, 64 bit, optimized
M pid 6396
M
M
M Thu Jan 22 15:12:50 2009
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q01=> ThInit, WPStart (Workproc 0 1 6396) [thxxhead.c 1290]
M ThInit: running on host USALSAPU
M calling db_connect ...
C DB4 SQL Reparse Activated
C
C Thu Jan 22 15:12:51 2009
C R3INLPGM: RmtExeLib from /usr/sap/Q60/SYS/exe/run/DBSLDB4RMT
C R3INLPGM: RmtExeLib is KRNQ60700
C DBSLENCWT: rc=0, msg=CPF9897 CONCURRENT WRITE IS ENABLED.
C DbSl/DB codepage check: table or row not found (db_rc=24) - OK.
C === Central DB connect successfull! ===
C === Connection settings ===
C connected = TRUE
C con_hdl = 0
C db_handle = 1
C dbhost = USALSAPU
C rdbname =
C dblib = R3Q60DATA
C r3sysle_changed = TRUE
C query_compl_reval = O
C dbconnecttype = L
C user = Q6079
C qaqqinilib = Default (QUSRSYS)
C dbjobname = WP00
C dbjobuser = Q6079
C dbjobno = 197762
C rmtexelib = KRNQ60700
C parallel_alter_tables = *OFF
C ===========================
C Found only default query options in QUSRSYS/QAQQINI.
C -
C -
DbSl EGO Structure
C -
C SAPSYSTEMNAME = Q60
C Character encoding = UNICODE
C process class = dialog process
C workprocess id = 0
C local host = USALSAPU
C dbhost = USALSAPU
C rdbname =
C dbname = Q60USALSAPU
C dblib = R3Q60DATA
C application server = DVEBMGS79
C Connect type = LOCAL
C pid = 6396
C wpjobname = WP00
C wpjobuser = Q6079
C wpjobno = 197762
C DB2/400 vers. appl. server = PASE 1
C DB2/400 vers. DB server = V6R1
C da_cache_size = 100
C reopen = ON
C timeout_retry = 3
C ODP threshold = 800
C ODP commit thresh. = 810
C ODP open thresh. = 850
C QAQQINI library = Default (QUSRSYS)
C Alternate QAQQINI library = Not specified
C use_lobs_for_long = ON
C use_lobs_for_short = OFF
C single_execution_threshold = 2000
C single_execution_reuse = OFF
C keep_tmp_SQLpkgs = OFF
C dbsl_trace = OFF
C allow_cancel = Try (Unspecified)
C nqe_optimize_method = O - All I/O (compatibility mode)
C nte_list_size = 10
C dbsl_alternate_package = OFF
C -
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090122 151250 USALSAPU
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0x7000002d0000000, size: 120000000)
M SHM_ROLL_AREA (addr: 0x7000002e0000000, size: 268435456)
M SHM_PAGING_AREA (addr: 0x7000002f0000000, size: 335544320)
M SHM_ROLL_ADM (addr: 0x700000310000000, size: 2672386)
M SHM_PAGING_ADM (addr: 0x700000320000000, size: 820256)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0x700000330000000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 0x700000340000000
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation std
X <ES> Info: use normal pages (no huge table support available)
X ES initialized.
B dbntab: NTAB buffers created
B dbntab: Buffer FTAB(hash header) (addr: 0x700000360000088, size: 584)
B dbntab: Buffer FTAB(anchor array) (addr: 0x7000003600002d0, size: 1280008)
B dbntab: Buffer FTAB(item array) (addr: 0x700000360138ad8, size: 5120000)
B dbntab: Buffer FTAB(data area) (addr: 0x70000036061aad8, size: 122880000)
B dbntab: Buffer IREC(hash header) (addr: 0x700000370000088, size: 584)
B dbntab: Buffer IREC(anchor array) (addr: 0x7000003700002d0, size: 1280008)
B dbntab: Buffer IREC(item array) (addr: 0x700000370138ad8, size: 1280000)
B dbntab: Buffer IREC(data area) (addr: 0x7000003702712d8, size: 15360000)
B dbntab: Buffer STAB(hash header) (addr: 0x700000380000088, size: 584)
B dbntab: Buffer STAB(anchor array) (addr: 0x7000003800002d0, size: 1280008)
B dbntab: Buffer STAB(item array) (addr: 0x700000380138ad8, size: 1280000)
B dbntab: Buffer STAB(data area) (addr: 0x7000003802712d8, size: 3072000)
B dbntab: Buffer TTAB(hash header) (addr: 0x700000390000088, size: 2976)
B dbntab: Buffer TTAB(anchor array) (addr: 0x700000390000c28, size: 1280008)
B dbntab: Buffer TTAB(item array) (addr: 0x700000390139430, size: 3200000)
B dbntab: Buffer TTAB(data area) (addr: 0x700000390446830, size: 23360000)
B
B Thu Jan 22 15:12:52 2009
B dbstat: table statistics switched on for 84171 tables
B dbstat: TABSTAT buffer created (addr: 0x7000003a0000000, size: 41152488)
B db_con_shm_ini: WP_ID = 0, WP_CNT = 23, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0x7000003b0000100, size: 350000000, end: 0x7000003c4dc9480)
B dbtbxbuf: Profile: max_objects = 40000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 104857600
B ***LOG BB0=> buffer TABL started with length 350000000 bytes [dbtbxbuf#3 @ 16202] [dbtbxbuf1620 2]
B dbtbxbuf: Buffer TABLP (addr: 0x7000003d0000100, size: 35840000, end: 0x7000003d222e100)
B dbtbxbuf: Profile: max_objects = 2000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 17590656
B ***LOG BB0=> buffer TABLP started with length 35840000 bytes [dbtbxbuf#3 @ 16202] [dbtbxbuf1620 2]
B dbtbxbuf: Reading TBX statistics:
B dbtbxbuf: 29 object entries precreated
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 80021 * 48 = 3841008
B 4: 40000 * 256 = 10240000
B 5: 80021 * 8 = 640168
B 6: 1 * 200 = 200
B 7: 513 * 8 = 4104
B 8: 262473 * 256 = 67193088
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer EIBUF (addr: 0x7000003f0000108, size: 81920000, end: 0x7000003f4e20108)
B ***LOG BB0=> buffer EIBUF started with length 80000k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of ESM buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 4001 * 48 = 192048
B 4: 2000 * 256 = 512000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 13500 * 256 = 3456000
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer ESM (addr: 0x700000400000108, size: 4194304, end: 0x700000400400108)
B ***LOG BB0=> buffer ESM started with length 4096k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of CUA buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 40009 * 48 = 1920432
B 4: 20000 * 256 = 5120000
B 5: 40009 * 8 = 320072
B 6: 1 * 200 = 200
B 7: 193 * 8 = 1544
B 8: 65617 * 512 = 33595904
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer CUA (addr: 0x700000410000108, size: 40960000, end: 0x700000412710108)
B ***LOG BB0=> buffer CUA started with length 40000k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of OTR buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 4001 * 48 = 192048
B 4: 2000 * 256 = 512000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 81 * 8 = 648
B 8: 13500 * 256 = 3456000
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer OTR (addr: 0x700000420000108, size: 4194304, end: 0x700000420400108)
B ***LOG BB0=> buffer OTR started with length 4096k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B ***LOG BB0=> buffer CALE started with length 500000 bytes [dbcalbuf#10 @ 2305] [dbcalbuf2305 ]
B dbtran INFO (init_connection '<DEFAULT>' [DB400:700.08]):
B max_blocking_factor = 20, max_in_blocking_factor = 40,
B min_blocking_factor = 10, min_in_blocking_factor = 10,
B prefer_union_all = 0, prefer_join = 0,
B prefer_fix_blocking = 1, prefer_in_itab_opt = 1,
B convert AVG = 1, alias table FUPD = 1,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x00, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x3, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
M
M Thu Jan 22 15:12:53 2009
M SecAudit(RsauInit): Start init of Security Audit Log for first wp.
M SecAudit(RsauCreateShm): New block for Security Audit Log allocated in SCSA
M SecAudit(RsauCreateShm): SCSA memory usage: SecAudit = 1152, total = 3048
M SecAudit(RsauShmInit): SCSA size................ = 4096
M SecAudit(RsauShmInit): addr of SCSA............. = 0x700000040000000
M SecAudit(RsauShmInit): addr of RSAUSHM.......... = 0x700000040000768
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO..... = 0x7000000400007a0
M SecAudit(RsauShmInit): addr of RSAUSLOTS........ = 0x7000000400007ac
M SecAudit(RsauShmInit): SHM version.............. = 5
M SecAudit(RsauShmInit): SHM Slot version......... = 2
M SecAudit(RsauShmInit): RSAU active.............. = 0
M SecAudit(RsauShmInit): number of slots possible. = 10
M SecAudit(RsauShmInit): number of slots requested = 2
M SecAudit(RsauShmInit): number of slots used..... = 2
M SecAudit(RsauShmInit): user selection........... = 0
M SecAudit(RsauShmInit): max size of one file..... = 0 KB
M SecAudit(RsauShmInit): max size of all files.... = 102400 KB
M SecAudit(RsauGetCurrentProfile): Init of shared memory completed
M SecAudit(RsauGetCurrentProfile): Security Audit Log not active
M SsfSapSecin: automatic application server initialization for SAPSECULIB
N SsfSapSecin: Looking for PSE in database
N SsfPseLoad: started...(path=/usr/sap/Q60/DVEBMGS79/sec, AS=USALSAPU, instanceid=79)
N SsfPseLoad: Downloading file /usr/sap/Q60/DVEBMGS79/sec/SAPSYS.pse (client: , key: SYSPSE, len: 1872)
N SsfPseLoad: ended (1 of 1 sucessfully loaded, 1 checked...
N MskiCreateLogonTicketCache: Logon Ticket cache created in shared memory.
N MskiCreateLogonTicketCache: Logon Ticket cache pointer registered in shared memory.
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M CCMS: AlMsUpload called by wp 0.
M CCMS: AlMsUpload successful for /usr/sap/Q60/DVEBMGS79/log/ALMTTREE (0 MTEs).
M CCMS: start to initalize 3.X shared alert area (first segment).
S
S Thu Jan 22 15:12:54 2009
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0x18499b440
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 2 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 400
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0x700000460000070
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0x700000460000740
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2272 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A
A Thu Jan 22 15:12:55 2009
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 139532kb, dir_size: 34808kb.
A Attached to PXA (address 0x700000470000000, size 1998848K, 4 fragments of 464832K )
A abap/pxa = shared unprotect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=0x7000000b0577000 leng=20955136 end=0x7000000b1973000)
A >> Shm MMADM area (addr=0x7000000b0a50fa8 leng=244096 end=0x7000000b0a8c928)
A >> Shm MMDAT area (addr=0x7000000b0a8d000 leng=15622144 end=0x7000000b1973000)
A RFC Destination> destination USALSAPU_Q60_79 host USALSAPU system Q60 systnr 79 (USALSAPU_Q60_79)
A RFC Options> H=USALSAPU,S=79,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 47822 bytes at 0x7000004f0000000
N
N Thu Jan 22 15:12:56 2009
N SsfSapSecin: PSE /usr/sap/Q60/DVEBMGS79/sec/SAPSYS.pse found!
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is /usr/sap/Q60/SYS/exe/run/libsapsecu.o .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...completed with return code 5.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.172.20050900]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [17]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N VSI: WP init in ABAP VM completed with rc=0
E
E Thu Jan 22 15:12:58 2009
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Thu Jan 22 15:13:03 2009
M SosICreateNewAnchorArray: sos_search_anchor_semantics = 1
A
A Thu Jan 22 15:13:07 2009
A *** ERROR => RFC ======> cannot open SAPGUI
[abrfcio.c 8185]
A RFC 1729 CONVID 62379446
A * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui cannot open SAPGUI
A RFC> ABAP Programm: SAPLSLDAG (Transaction: )
A RFC> User: DDIC (Client: 000)
A RFC> Destination: SERVER_EXEC (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 62377117, {4978D392-D34E-190F-E100-80020A001114})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SLDAPPL_SERV)
A RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
PROG =rfcexec USALSAPU sapgw79 62379446 IDX=2
[abrfcio.c 8185]
A *** ERROR => RFC ======> FUNCTION: 'exec_sapgui'
cannot open SAPGUI
[abrfcio.c 8185]
A RFC 1729 CONVID 62382527
A * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui FUNCTION: 'exec_sapgui'
A cannot open SAPGUI
A RFC> ABAP Programm: SAPLSLDAG (Transaction: )
A RFC> User: DDIC (Client: 000)
A RFC> Destination: SERVER_EXEC (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 62381506, {4978D397-D34E-190F-E100-80020A001114})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SLDAPPL_SERV)
A RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
PROG =rfcexec USALSAPU sapgw79 62382527 IDX=3
[abrfcio.c 8185]
A
A Thu Jan 22 15:13:14 2009
A *** ERROR => RFC ======> FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
[abrfcio.c 8185]
A RFC 1729 CONVID 62392457
A * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui FUNCTION: 'exec_sapgui'
A FUNCTION: 'exec_sapgui'
A cannot open SAPGUI
A RFC> ABAP Programm: SAPLSLDAG (Transaction: )
A RFC> User: DDIC (Client: 000)
A RFC> Destination: SERVER_EXEC (handle: 3, , )
A RFC SERVER> RFC Server Session (handle: 1, 62381506, {4978D397-D34E-190F-E100-80020A001114})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SLDAPPL_SERV)
A RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
PROG =rfcexec USALSAPU sapgw79 62392457 IDX=6
[abrfcio.c 8185]
B
B Thu Jan 22 15:13:16 2009
B table logging switched on for client '010'
M
M Thu Jan 22 15:13:22 2009
M AS400_API connected to 'USALSAPU'. DBJob: (197789/QUSER /QXDARECVR )M *** ERROR => AS400_API (APICODE 23) failed with SY-SUBRC = 9 [abas4api.c 1548]
M *** ERROR => Cannot open file '/usr/sap/transD60/config/infoapar.610' [ 0]
A A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Thu Jan 22 15:13:22 2009
A
A ABAP Program SAPMSYST .
A Source SAPMSYST Line 1770.
A Error Code DYNPRO_NOT_FOUND.
A Module $Id: //bas/700_REL/src/krn/dynp/dybas.c#6 $ SAP.
A Function dyrdyp.c Line 545.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_RABAX
A Dynpro does not exist.
A
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Thu Jan 22 15:13:23 2009
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Thu Jan 22 15:13:23 2009
A
A ABAP Program SAPMS380 .
A Source Line 0.
A Error Code DYNPRO_NOT_FOUND.
A Module $Id: //bas/700_REL/src/krn/dynp/dybas.c#6 $ SAP.
A Function dyrdyp.c Line 545.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_SAPDEXT
A Dynpro does not exist.
A
M ThIUsrDel: th_rollback_usrdelentry = 1
M ***LOG R47=> ThResFree, delete (001024) [thxxmode.c 1384]
S
S Thu Jan 22 15:14:20 2009
S found spool memory service RSPO-ACTIONS at 0x70000046000a478Hi TJ,
you are having definetely other issues, than the ones that might be caused by clrpfm of the tables above ...
But, based on that data, I do not know which ones ;-(
There are dynpro tables like dynpload or d3456t or so not proper ...
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de -
File Sender - get files from DB4 and OS400
Hi,
I'm configuring File - IDOC scenario on XI system, which is on Win platform. I want to pick up flat txt files on DB4 and OS400 via FTP but I+m constantly getting message:
Could not process due to error: com.sap.aii.adapter.file.ftp.FTPEx: 550 Not authorized to file /sapmnt/trans/sucelja/sap_izlaz/ksuckd03.txt
What could be a reason for that error, according to OS400 admin, FTP user is ok, and has all rights to acces this file. I also tried to us \ as separator but no luck.
Maybe is important, OS400 is SAP server and /sapmnt/ is mount of where SAP is installed....
thx marioI solved it. File didn't have appropriate atributes. It is hard to check file attributes on SAP, so I coded program that uses feature of OS400/SAP(not sure which one), that is file and directory structure represented UNIX like, and my program for
ls -al /usr/sap/trans/sucelja/sap_izlaz/ksuckd03.txt
responded with
<i>-rwxrwxrwx 1 dvk10 r3group 2682 Oct 3 12:54 /usr/sap/trans/sucelja/sap_izlaz/ksuckd03.txt</i>
it was not to hard to do
chmod 777 /usr/sap/trans/sucelja/sap_izlaz/ksuckd03.txt
br
mario -
OS/DB Migration to Windows X64 bit /Oracle 10G from OS400/DB4 V5R4
Hi,
We need to do the OS/ DB migration in BI servers .. Kindly guide me .. what are the prerequesties ?
I think we can achieve this throught Heterogeneous system copy .
Source system Target system
NW2004 -BI 7.0 NW2004 -BI 7.0
DB4 V5R4 Oracle 10G
OS400 Win2003 x64
SAP kernel 700 SAP Kernel 700
Thanks in advance ..
gnanaprakasamHi
You need perform a heterogeneus system copy with sapinst
Chose the sap system->Software Life-Cycle options->system copy->database
And perform in tree steps
export preparation
table splitting preparation
database istance export
It create a export database, and with the sapinst you import in Target system
More info
http://service.sap.com/instguides
Heterogeneous system copy
Regards
William Neira -
Performance tuning for OS400 - three instances
I have an OS400 LPAR that has been setup with 10GB RAM and 40GB swap space.
The LPAR supports three SAP systems, a development ERP, QA ERP and PI Development system (ABAP+JAVA). All systems are based from the Netweaver 7.0 stack.
Quite often the CPU maxes at 100% of utilization. This occurs even when the DB02 transaction is started and CPU will hit 100% for approximately 30 seconds (the time for DB02 to load is about 35 seconds).
Work with System Status SAPDEV
27/06/08 11:10:56
% CPU used . . . . . . . : 100.0 System ASP . . . . . . . : 846.7 G
% DB capability . . . . : 26.3 % system ASP used . . . : 86.3558
Elapsed time . . . . . . : 00:00:01 Total aux stg . . . . . : 846.7 G
Jobs in system . . . . . : 6277 Current unprotect used . : 34170 M
% perm addresses . . . . : .010 Maximum unprotect . . . : 39988 M
% temp addresses . . . . : .117
Sys Pool Reserved Max -
DB----- Non-DB- Act- Wait- Act-
Pool Size M Size M Act Fault Pages Fault Pages Wait Inel Inel
1 700.00 244.04 +++++ .0 .0 .0 .0 188.4 .0 .0
2 10008.06 6.70 3000 1.8 28.8 1.2 2.5 2713 .0 .0
3 400.00 .07 151 .0 .0 .0 .0 37.6 .0 .0
4 80.00 .00 5 .0 .0 .0 .0 .0 .0 .0
The wrkdsksts occassionally hits 100% busy, but most of the time, averages:
Work with Disk Status SAPDEV
27/06/08 11:39:01
Elapsed time: 00:00:53
Size % I/O Request Read Write Read Write %
Unit Type (M) Used Rqs Size (K) Rqs Rqs (K) (K) Busy
1 4328 105847 82.2 44.2 9.6 30.1 14.0 6.1 17.3 3
2 4328 105847 88.9 4.2 15.1 1.5 2.7 29.2 7.4 1
3 4328 105847 89.0 4.9 13.5 1.7 3.1 23.4 7.9 1
4 4328 105847 88.8 5.1 15.6 2.2 2.8 24.7 8.5 1
5 4328 141129 85.4 6.5 14.3 2.8 3.6 22.4 7.9 2
6 4328 141129 85.4 5.8 16.5 2.6 3.2 28.1 6.9 2
7 4328 141129 85.4 6.1 16.6 2.6 3.4 28.8 7.2 1
Does this appear to be a CPU related limitation for performance or am I able to better tune the memory/disk allocation?
Quite often the Java stack on the PI system seems to hang and needs to be restarted.
Would it be useful for me to split the memory in multiple pools to support ERP and the PI systems separately?
Thanks for your assistance!Hi Satid,
Thanks for your comments. In regards to your query, the Processor feature value is 5460.
I have granted this LPAR some additional resources, being 0.8 CPU and 16GB of RAM, (originally, 1.2CPU and 18GB RAM was planned however, there were max limits originally configured which I decided to abide by for the interim).
The performance is significantly better now.
I'm still centering on the Java Garbage Collector as its usually around this that performance is impacted.
grep "current heap" std_server0.out
GC 1: current heap(KB) 6436; current threshold(KB) 1048576.
GC 2: current heap(KB) 1208776; current threshold(KB) 1048576.
GC 3: current heap(KB) 1468428; current threshold(KB) 1048576.
GC 4: current heap(KB) 1628184; current threshold(KB) 1048576.
GC 5: current heap(KB) 1662796; current threshold(KB) 1048576.
GC 6: current heap(KB) 1686988; current threshold(KB) 1048576.
GC 7: current heap(KB) 1762488; current threshold(KB) 1048576.
GC 8: current heap(KB) 2034252; current threshold(KB) 1048576.
GC 9: current heap(KB) 2266228; current threshold(KB) 1048576.
GC 10: current heap(KB) 2389784; current threshold(KB) 1048576.
GC 11: current heap(KB) 2336620; current threshold(KB) 1048576.
GC 12: current heap(KB) 2317836; current threshold(KB) 1048576.
GC 13: current heap(KB) 2316024; current threshold(KB) 1048576.
GC 14: current heap(KB) 2295552; current threshold(KB) 1048576.
GC 15: current heap(KB) 2355488; current threshold(KB) 1048576.
GC 16: current heap(KB) 2340512; current threshold(KB) 1048576.
GC 17: current heap(KB) 2352872; current threshold(KB) 1048576.
GC 18: current heap(KB) 2342312; current threshold(KB) 1048576.
GC 19: current heap(KB) 2238296; current threshold(KB) 1048576.
GC 20: current heap(KB) 2209844; current threshold(KB) 1048576.
GC 21: current heap(KB) 2211380; current threshold(KB) 1048576.
GC 22: current heap(KB) 2168864; current threshold(KB) 1048576.
GC 23: current heap(KB) 2269324; current threshold(KB) 1048576.
grep "collect (mill" std_server0.out
GC 1: collect (milliseconds) 110.
GC 2: collect (milliseconds) 2111.
GC 3: collect (milliseconds) 3321.
GC 4: collect (milliseconds) 3797.
GC 5: collect (milliseconds) 4815.
GC 6: collect (milliseconds) 5418.
GC 7: collect (milliseconds) 1313.
GC 8: collect (milliseconds) 15789.
GC 9: collect (milliseconds) 5754.
GC 10: collect (milliseconds) 33555.
GC 11: collect (milliseconds) 39700.
GC 12: collect (milliseconds) 44957.
GC 13: collect (milliseconds) 40003.
GC 14: collect (milliseconds) 13410.
GC 15: collect (milliseconds) 309107
GC 16: collect (milliseconds) 1819.
GC 17: collect (milliseconds) 37277.
GC 18: collect (milliseconds) 443266
GC 19: collect (milliseconds) 1890.
GC 20: collect (milliseconds) 78749.
GC 21: collect (milliseconds) 40124.
GC 22: collect (milliseconds) 14932.
GC 23: collect (milliseconds) 10085.
grep "starting collection" std_server0.out
GC 1: starting collection, reason external thread attached.
GC 2: starting collection, threshold allocation reached.
Login :GC 3: starting collection, threshold allocation reached.
GC 4: starting collection, threshold allocation reached.
GC 5: starting collection, threshold allocation reached.
GC 6: starting collection, threshold allocation reached.
GC 7: starting collection, threshold allocation reached.
GC 8: starting collection, threshold allocation reached.
GC 9: starting collection, threshold allocation reached.
GC 10: starting collection, threshold allocation reached.
GC 11: starting collection, threshold allocation reached.
GC 12: starting collection, threshold allocation reached.
GC 13: starting collection, threshold allocation reached.
GC 14: starting collection, threshold allocation reached.
GC 15: starting collection, threshold allocation reached.
GC 16: starting collection, reason stop the world collection.
GC 16: starting collection, reason stop the world collection.
GC 17: starting collection, threshold allocation reached.
GC 18: starting collection, threshold allocation reached.
GC 19: starting collection, reason stop the world collection.
GC 19: starting collection, reason stop the world collection.
GC 20: starting collection, threshold allocation reached.
GC 21: starting collection, threshold allocation reached.
GC 22: starting collection, threshold allocation reached.
GC 23: starting collection, threshold allocation reached.
From the std_server0.out logs, I have the following impression:
- maximum heap size is set too low (currently set at 4096MB)
- initial heap size set too low (currently 1024MB)
- garbage collection unable to keep up
I appreciate any suggestions to tune these settings.
I'm thinking of setting the following:
- initial heap size to 2048MB
- maximum heap size to 8192MB
Would this be suitable considering there are three instances running on the same partition with Java being allocated this amount of memory. I'm open to suggestions to refine these figures.
Thanks! -
Hi,
Is it possible to set up a SAP printer that will send the spool to a text file on the IFS?
Cheers,
DanCheck Note 784233 - OS400: Print to ASCII file on iSeries using Access Method L
Markus -
After a system restart i cannot connect to SAP with SAPGUI.
After a system restart i cannot connect to SAP with SAPGUI.
See attached log "dev_disp" and "dev_w0"
At the end of this message you can see the comparison between the
defective system and another working system
I notice the absence of the "IGS400" process
Could you please help me ?
Best regards to everybody.
"dev_disp" log file tell me : ************************
trc file: "dev_disp", trc level: 1, release: "640"
Thu Jun 21 13:21:24 2007
kernel runs with dp version 132(ext=102) (@(#) DPLIB-INT-VERSION-132)
length of sys_adm_ext is 312 bytes
sysno 00
sid SVI
systemid 324 (IBM iSeries with OS400)
relno 6400
patchlevel 0
patchno 147
intno 20020600
make: single threaded, ASCII, 64 bit
pid 380
Thu Jun 21 13:21:27 2007
***LOG Q00=> DpSapEnvInit, DPStart (00 380) [dpxxdisp.c 1100]
shared lib "dw_xml.so" version 147 successfully loaded
shared lib "dw_xtc.so" version 147 successfully loaded
shared lib "dw_stl.so" version 147 successfully loaded
shared lib "dw_gui.so" version 147 successfully loaded
shared lib "dw_mdm.so" version 147 successfully loaded
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >FRASTEST_SVI_00 <
DpShMCreate: sizeof(wp_adm) 10712 (824)
DpShMCreate: sizeof(tm_adm) 3021432 (15032)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 216000 (432)
DpShMCreate: sizeof(vmc_adm) 0 (448)
DpShMCreate: sizeof(wall_adm) (22440/36712/56/104)
Thu Jun 21 13:21:28 2007
DpShMCreate: SHM_DP_ADM_KEY (addr: 700000080000000, size: 3337656)
DpShMCreate: allocated sys_adm at 700000080000000
DpShMCreate: allocated wp_adm at 700000080001830
DpShMCreate: allocated tm_adm_list at 700000080004208
DpShMCreate: allocated tm_adm at 700000080004230
DpShMCreate: allocated wp_ca_adm at 7000000802e5ca8
DpShMCreate: allocated appc_ca_adm at 7000000802ea2f8
DpShMCreate: allocated comm_adm_list at 7000000802eba68
DpShMCreate: allocated comm_adm at 7000000802eba80
DpShMCreate: allocated vmc_adm_list at 700000080320640
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 700000080320668
DpShMCreate: allocated wall_adm at 700000080320670
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
Thu Jun 21 13:21:29 2007
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
EsIUnamFileMapInit: ES base = 0x7000000d0000000
EsStdInit: Extended Memory 4096 MB allocated
<ES> 1023 blocks reserved for free list.
ES initialized.
Thu Jun 21 13:22:33 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
Thu Jun 21 13:22:35 2007
***LOG Q0K=> DpMsAttach, mscon ( FRASTEST) [dpxxdisp.c 10036]
Thu Jun 21 13:22:36 2007
DpStartStopMsg: send start message (myname is >FRASTEST_SVI_00 <)
DpStartStopMsg: start msg sent
Thu Jun 21 13:22:47 2007
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Thu Jun 21 13:22:49 2007
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 147
Release check o.K.
Thu Jun 21 13:39:13 2007
DpSigInt: caught signal 2
DpHalt: shutdown server >FRASTEST_SVI_00 < (normal)
Thu Jun 21 13:39:14 2007
***LOG Q0I=> NiPWrite: writev (32: Broken pipe) [niuxi.c 1140]
ERROR => MsINiWrite: NiBufSend (rc=NIECONN_BROKEN) [msxxi.c 2455]
ERROR => MsIModState: MsINiWrite (rc=NIECONN_BROKEN) [msxxi.c 3695]
MBUF state OFF
MBUF component DOWN
DpModState: change server state from STARTING to SHUTDOWN
Thu Jun 21 13:39:15 2007
Stop work processes...
Thu Jun 21 13:40:18 2007
ERROR => DpWpKill(411, SIGUSR2): kill failed [dpxxtool.c 2462]
Stop gateway
Stop icman
Terminate gui connections
waiting for termination of work processes
Thu Jun 21 13:40:19 2007
waiting for termination of work processes
Thu Jun 21 13:40:20 2007
waiting for termination of work processes
Thu Jun 21 13:40:21 2007
waiting for termination of work processes
"dev_w0" log file tell me : ************************
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
M sysno 00
M sid SVI
M systemid 324 (IBM iSeries with OS400)
M relno 6400
M patchlevel 0
M patchno 147
M intno 20020600
M make: single threaded, ASCII, 64 bit
M pid 404
M
M
M Thu Jun 21 13:22:00 2007
M ***LOG Q01=> tskh_init, WPStart (Workproc 0 1 404) [thxxhead.c 1146]
M calling db_connect ...
C DB4 SQL Reparse Activated
C
C Thu Jun 21 13:22:11 2007
C R3INLPGM: RmtExeLib from /usr/sap/SVI/SYS/exe/run/DBSLDB4RMT
C R3INLPGM: RmtExeLib is R3640ASVI
C
C Thu Jun 21 13:22:13 2007
C Connection to database done without problems.
C -
C -
DbSl EGO Structure
C -
C SAPSYSTEMNAME = SVI
C Character encoding = ASCII
C process class = dialog process
C workprocess id = 0
C local host = FRASTEST
C dbhost = FRASTEST
C rdbname =
C dbname = SVIFRASTEST
C dblib = R3SVIDATA
C application server = DVEBMGS00
C Connect type = LOCAL
C pid = 404
C dbjobname = WP00
C dbjobuser = SVI00
C dbjobno = 025901
C wpjobname = WP00
C wpjobuser = SVI00
C wpjobno = 025901
C DB2/400 vers. appl. server = PASE 4
C DB2/400 vers. DB server = V5R4
C da_cache_size = 100
C reopen = ON
C timeout_retry = 3
C ODP threshold = 800
C ODP commit thresh. = 810
C ODP open thresh. = 850
C QAQQINI library = Default (QUSRSYS)
C Alternate QAQQINI library = Not specified
C use_lobs_for_long = ON
C use_lobs_for_short = OFF
C single_execution_threshold = 2000
C single_execution_reuse = OFF
C keep_tmp_SQLpkgs = OFF
C dbsl_trace = off
C allow_cancel = OFF
C nqe_optimize_method = O - All I/O (compatibility mode)
C query_compl_reval = O
C nte_list_size = 10
C -
C
C Thu Jun 21 13:22:17 2007
C SQL monitor started for job
B
B Thu Jun 21 13:22:18 2007
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070621 132200 FRASTEST
M
M Thu Jun 21 13:22:37 2007
M db_connect o.k.
M
M Thu Jun 21 13:22:38 2007
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
ACTIVE TRACE LEVEL 2
ACTIVE TRACE COMPONENTS all, M
M -
C-STACK -
=> 64 bit R/3 Kernel
=> 64 bit OS400 Kernel
=> Heap limit = unlimited
=> Stack limit = unlimited
=> Core limit = unlimited
=> File size limit = unlimited
=> Heap address = 0x40000000000000009ED34587C2E94220
=> Stack address = 0xffffffffffff3f0
=> Stack low = 0xfffffffffffdb30
=> Stack high = 0xffffffffffffa90
=> Stack Trace:
Unknown at 0x3618
sleepms() at 0x1000f9324
SpinLockSemRq1() at 0x1000f926c
SemRq() at 0x1000fcf6c
ThIPCInit() at 0x1000ac1a0
tskh_init() at 0x1000ad704
tskhstart() at 0x1000c0950
DpMain() at 0x10175ad2c
nlsui_main() at 0x10172dee8
=> CPU Registers:
msr = 0x800000000000f032 iar = 0x0000000000003618
ctr = 0x0000000000003610 lr = 0x09000000000a2890
xer = 0x0000000008000000 cr = 0x000000002a404445
r00 = 0x0000000000000000 r01 = 0x0ffffffffffff3f0
r02 = 0x00000000000000a4 r03 = 0xffffffffffffffff
r04 = 0x0000000000000000 r05 = 0x0000000000000000
r06 = 0x0000000000000000 r07 = 0x0ffffffffffff520
r08 = 0x0000000000000001 r09 = 0x0000000010108003
r10 = 0xb00010000c90e000 r11 = 0xb00010000c90ef30
r12 = 0x0900000000001eb0 r13 = 0x0000000182784a50
r14 = 0x0000000000000002 r15 = 0x00000001810e6c48
r16 = 0x0ffffffffffffb28 r17 = 0x000000018001bf20
r18 = 0x0000000000000003 r19 = 0x0000000000000004
r20 = 0x0000000180c6de34 r21 = 0x0000000180c6de28
r22 = 0x000000018004ce60 r23 = 0x0000000180c6e244
r24 = 0x0000000000000064 r25 = 0x0000000000000158
r26 = 0x0000000000000158 r27 = 0x0000000000000000
r28 = 0x0000000000000000 r29 = 0x0fffffffffffffe0
r30 = 0x09001000a005ec48 r31 = 0x0000000000000000
Thu Jun 21 13:40:23 2007
Library |(SRV)PGM |Module |Function/Statement No.
Thu Jun 21 13:40:24 2007
|--||--
QSYS |QP2USER2 |QP2API |__Qp2Fork 8
QSYS |QP2USER2 |QP2API |runpase_main__FPi 6
QSYS |QP2USER2 |QP2API |runpase_common__FiPvT2 2
R3640ASVI |O4PRTLIBC |AS4STACK |As4Stack_From_PASE 3
R3640ASVI |O4PRTLIBC |AS4STACK |As4StackOut 10
R3640ASVI |O4PRTLIBC |AS4STACK |_MATINVS2__8O4_StackFv 8
M -
ACTIVE JOBS OF DEFECTIVE SYSTEM
Opz Sottosis/Lav corrente Tipo % CPU Funzione Stato
R3_00 QSYS SBS 0,0 DEQW
DISP_WORK SVI00 BCI 5,3 PGM-disp+work CNDW
GWRD SVI00 BCI 10,9 PGM-gwrd RUN
ICMAN SVI00 BCI 1,8 PGM-icman RUN
MSG_SERVER SVI00 BCI 0,0 PGM-MSG_SERVER SELW
RSLGCOLL SVI00 BCI 0,0 PGM-rslgcoll SELW
RSLGSEND SVI00 BCI 0,0 PGM-rslgsend SELW
SAPOSCOL SVI00 BCI 1,0 PGM-SAPOSCOL RUN
SAPSTART SVI00 BCH 0,0 PGM-sapstart EVTW
WATCHDOG SVI00 BCI 0,4 PGM-disp+work SELW
WP00 SVI00 BCI 1,0 PGM-disp+work RUN
WP01 SVI00 BCI 1,0 PGM-disp+work RUN
WP02 SVI00 BCI 1,0 PGM-disp+work RUN
WP03 SVI00 BCI 1,1 PGM-disp+work RUN
WP04 SVI00 BCI 0,9 PGM-disp+work RUN
WP05 SVI00 BCI 0,9 PGM-disp+work RUN
WP06 SVI00 BCI 0,8 PGM-disp+work RUN
WP07 SVI00 BCI 0,6 PGM-disp+work RUN
WP08 SVI00 BCI 0,0 RUN
ACTIVE JOBS OF WORKING SYSTEM
R3_03 QSYS SBS 0,0 DEQW
DISP_WORK TST03 BCI 0,0 PGM-disp+work SELW
GWRD TST03 BCI 0,0 PGM-gwrd SELW
ICMAN TST03 BCI 0,0 PGM-icman SELW
IGS400 TST03 BCI 0,0 PGM-igswd_mt THDW
IGS400 TST03 BCI 0,0 PGM-igsmux_mt THDW
IGS400 TST03 BCI 0,0 PGM-igspw_mt THDW
IGS400 TST03 BCI 0,0 PGM-igspw_mt THDW
MSG_SERVER TST03 BCI 0,0 PGM-MSG_SERVER SELW
RSLGSEND TST03 BCI 0,0 PGM-rslgsend THDW
SAPSTART TST03 BCH 0,0 PGM-sapstart EVTW
WATCHDOG TST03 BCI 0,0 PGM-disp+work SELW
WP00 TST03 BCI 0,0 PGM-disp+work SEMW
WP01 TST03 BCI 0,0 PGM-disp+work SEMW
WP02 TST03 BCI 2,5 PGM-disp+work RUN
WP03 TST03 BCI 0,0 PGM-disp+work SEMW
WP04 TST03 BCI 0,0 PGM-disp+work SEMW
WP05 TST03 BCI 0,0 PGM-disp+work SEMW
WP06 TST03 BCI 0,0 PGM-disp+work SEMW
WP07 TST03 BCI 0,0 PGM-disp+work SEMW
WP08 TST03 BCI 0,0 PGM-disp+work SEMW
WP09 TST03 BCI 0,0 PGM-disp+work SEMW
WP10 TST03 BCI 0,0 PGM-disp+work SEMW
WP11 TST03 BCI 0,0 PGM-disp+work SEMW
WP12 TST03 BCI 0,0 PGM-disp+work SEMWFollowing your suggestions i got this error message in the log file "dev_w0"
This process creted also a very big "core" file
B ***LOG BY4=> sql error 304 performing FET on table DDNTF [dbntab#7 @ 10281] [dbntab 1028 1]
B ***LOG BY0=> Conversion error in assignment to host variable *N. MSGID= Job=028178/SVI00/WP00 [dbntab#7 @ 10281] [dbntab 1028 1]
B *** ERROR => missing return code handler
caller does not handle code 1 from dbntab#7[3098]
Here is the complete log:
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
M sysno 00
M sid SVI
M systemid 324 (IBM iSeries with OS400)
M relno 6400
M patchlevel 0
M patchno 147
M intno 20020600
M make: single threaded, ASCII, 64 bit
M pid 317
M
M
M Wed Aug 1 17:53:03 2007
M ***LOG Q01=> tskh_init, WPStart (Workproc 0 1 317) [thxxhead.c 1146]
M calling db_connect ...
C DB4 SQL Reparse Activated
C
C Wed Aug 1 17:53:05 2007
C R3INLPGM: RmtExeLib from /usr/sap/SVI/SYS/exe/run/DBSLDB4RMT
C R3INLPGM: RmtExeLib is R3640ASVI
C Connection to database done without problems.
C -
C -
DbSl EGO Structure
C -
C SAPSYSTEMNAME = SVI
C Character encoding = ASCII
C process class = dialog process
C workprocess id = 0
C local host = FRASTEST
C dbhost = FRASTEST
C rdbname =
C dbname = SVIFRASTEST
C dblib = R3SVIDATA
C application server = DVEBMGS00
C Connect type = LOCAL
C pid = 317
C dbjobname = WP00
C dbjobuser = SVI00
C dbjobno = 028178
C wpjobname = WP00
C wpjobuser = SVI00
C wpjobno = 028178
C DB2/400 vers. appl. server = PASE 4
C DB2/400 vers. DB server = V5R4
C da_cache_size = 100
C reopen = ON
C timeout_retry = 3
C ODP threshold = 800
C ODP commit thresh. = 810
C ODP open thresh. = 850
C QAQQINI library = Default (QUSRSYS)
C Alternate QAQQINI library = Not specified
C use_lobs_for_long = ON
C use_lobs_for_short = OFF
C single_execution_threshold = 2000
C single_execution_reuse = OFF
C keep_tmp_SQLpkgs = OFF
C dbsl_trace = off
C allow_cancel = OFF
C nqe_optimize_method = O - All I/O (compatibility mode)
C query_compl_reval = O
C nte_list_size = 10
C -
C
C Wed Aug 1 17:53:09 2007
C SQL monitor started for job
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070801 175303 FRASTEST
M
M Wed Aug 1 17:53:12 2007
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Wed Aug 1 17:53:13 2007
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 700000200000000, size: 4400128)
M
M Wed Aug 1 17:53:14 2007
M SHM_ROLL_AREA (addr: 700000210000000, size: 268435456)
M
M Wed Aug 1 17:53:15 2007
M SHM_PAGING_AREA (addr: 700000220000000, size: 67108864)
M SHM_ROLL_ADM (addr: 700000230000000, size: 2672386)
M SHM_PAGING_ADM (addr: 700000240000000, size: 164896)
M
M Wed Aug 1 17:53:16 2007
M ThCreateNoBuffer allocated 324144 bytes for 1000 entries at 700000250000000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7440 bytes (50 server) at 700000260000000
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
X ES initialized.
B
B Wed Aug 1 17:53:20 2007
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13, CON_ID = -1
B
B Wed Aug 1 17:53:25 2007
B dbtbxbuf: Buffer TABL (addr: 7000002d0000100, size: 64000000, end: 7000002d3d09100)
B dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 31427136
B ***LOG BB0=> buffer TABL started with length 64000000 bytes [dbtbxbuf#8 @ 16037] [dbtbxbuf1603 7]
B
B Wed Aug 1 17:53:26 2007
B dbtbxbuf: Buffer TABLP (addr: 7000002e0000100, size: 16776192, end: 7000002e0fffd00)
B dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 8322944
B ***LOG BB0=> buffer TABLP started with length 16776192 bytes [dbtbxbuf#8 @ 16037] [dbtbxbuf1603 7]
B dbtbxbuf: Reading TBX statistics:
B dbtbxbuf: Opening /usr/sap/SVI/DVEBMGS00/data/tbxnew failed (No such file or directory).
B dbtbxbuf: Renaming /usr/sap/SVI/DVEBMGS00/data/tbxnew to /usr/sap/SVI/DVEBMGS00/data/tbxstat failed (No such file or directory).
B dbtbxbuf: 110 object entries precreated
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 8009 * 40 = 320360
B 4: 4000 * 160 = 640000
B 5: 8009 * 8 = 64072
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 319664 * 128 = 40916992
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer EIBUF (addr: 700000300000108, size: 41943040, end: 700000302800108)
B ***LOG BB0=> buffer EIBUF started with length 40960k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B Layout of ESM buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 4001 * 40 = 160040
B 4: 2000 * 160 = 320000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 28755 * 128 = 3680640
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer ESM (addr: 700000310000108, size: 4194304, end: 700000310400108)
B ***LOG BB0=> buffer ESM started with length 4096k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B Layout of CUA buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 16411 * 40 = 656440
B 4: 8191 * 160 = 1310560
B 5: 16411 * 8 = 131288
B 6: 1 * 200 = 200
B 7: 193 * 8 = 1544
B 8: 57325 * 256 = 14675200
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer CUA (addr: 700000320000108, size: 16776192, end: 700000320fffd08)
B ***LOG BB0=> buffer CUA started with length 16383k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B Layout of OTR buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 4001 * 40 = 160040
B 4: 2000 * 160 = 320000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 81 * 8 = 648
B 8: 28754 * 128 = 3680512
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B
B Wed Aug 1 17:53:27 2007
B dbexpbuf: Buffer OTR (addr: 700000330000108, size: 4194304, end: 700000330400108)
B ***LOG BB0=> buffer OTR started with length 4096k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B ***LOG BB0=> buffer CALE started with length 500000 bytes [dbcalbuf#2 @ 2212] [dbcalbuf2212 ]
C
C Wed Aug 1 17:53:29 2007
C *** ERROR => Error 304 in function db_fetch
[dbsldb4.cpp 9041]
C === DBSL Begin of SQL request after execution ===
C === DBSL SQLP0400 ===
C Function 5
C Package DDNTFIH Library R3SVIA2062
C Main_Pgm Main_Lib
C Statement_Name "Wx3AAADpDB" Cursor_Name "CADDNTF16461"
C Open_Options x80 Clause_For_Describe N
C Commitment_Control C
C Date_Format USA Date_Separator /
C Time_Format USA Time_Separator :
C Naming_Option SYS Decimal_Point .
C Blocking_Factor 1 Scrollable_Option 0
C Position_Option 0 Relative_Record 0
C Rows_To_Insert 0 Direct_Map N
C Reuse_DA N Name_Check Y
C Use_Ptrs 0 With_Hold N
C Close_File_Name Close_Library_Name *THRESHOLD
C Reopen 0 Use_Perf 1
C Query_Compl. (Reval) ! Statement_Text_CCSID 819
C Sort_Sequence_Table *JOB Sort_Sequence_Library *LIBL
C Language_ID *JOB Allow_Copy_Data S
C Allow_Blocking L
C === DBSL SQLDA ===
C sqldaid: SQLDA 2 , sqldabc: 816, sqln: 10, sqld: 4
C === TRACE VAR 0 ===
C sqlvar: 0, sqtype 469, sqllen 30, sqlname.data 13488
C sqlind: 0
C sqlname (hex):
C 0008000034B00000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 005400430041004C 0053002000200020 0020002000200020 0020002000200020
C 0020002000200020 0020002000200020 0020002000200020 00200020
C === TRACE VAR 1 ===
C sqlvar: 1, sqtype 501, sqllen 2, sqlname.data 0
C sqlind: -2
C sqlname (hex):
C 0000000000000000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 0000
C === TRACE VAR 2 ===
C sqlvar: 2, sqtype 497, sqllen 4, sqlname.data 0
C sqlind: -2
C sqlname (hex):
C 0000000000000000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 00000031
C === TRACE VAR 3 ===
C sqlvar: 3, sqtype 405, sqllonglen 32700
C sqldatalen NULL
C sqlind: 0
C sqlname (hex):
C 00080000FFFF0000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 0000028742000007 4100000000010000 0000280001000000 0100010000004944
C 0000000000000000 0000000000000000 0000000000000000 00000000004B4142
C === DBSL errc ===
C errc: OK
C === DBSL sqlca ===
C sqlcode: 304
C sqlerrml: 68, sqlerrmc:
C 00035CD540404040 4040404040404040 4040404040404040 4040404040404040
C 4040404040404040 4040404040404040 4040404040404040 4040404040404040
C 40400006
B ***LOG BY4=> sql error 304 performing FET on table DDNTF [dbntab#7 @ 10281] [dbntab 1028 1]
B ***LOG BY0=> Conversion error in assignment to host variable *N. MSGID= Job=028178/SVI00/WP00 [dbntab#7 @ 10281] [dbntab 1028 1]
B *** ERROR => missing return code handler
caller does not handle code 1 from dbntab#7[3098]
==> calling sap_dext to abort transaction
[dbeh.c 93]
M -
C-STACK -
=> 64 bit R/3 Kernel
=> 64 bit OS400 Kernel
=> Heap limit = unlimited
=> Stack limit = unlimited
=> Core limit = unlimited
=> File size limit = unlimited
=> Heap address = 0x40000000000000009E570787C2ED4260
=> Stack address = 0xfffffffffffd6f0
=> Stack low = 0xfffffffffffd6f0
=> Stack high = 0xffffffffffffa90
=> Stack Trace:
AixStack() at 0x10008d040
CTrcStack2() at 0x10008d138
ThControl() at 0x1006551a4
dyThControl() at 0x1003ab070
dextIntern() at 0x1003aa06c
sap_dext() at 0x1003aff24
dbeh_exit() at 0x100416924
db_ntab() at 0x10039d48c
read_ntab() at 0x101512474
db_cbufload() at 0x10150f40c
reset_handling() at 0x101512f00
init_shm_and_load_cals() at 0x10151394c
db_cbufinst() at 0x101514c48
db_calinit() at 0x1005ae8bc
db_init() at 0x1001c7ae0
ThCallHooks() at 0x1000c3654
ThIPCInit() at 0x1000ac574
tskh_init() at 0x1000ad704
tskhstart() at 0x1000c0950
DpMain() at 0x10175ad2c
nlsui_main() at 0x10172dee8
Wed Aug 1 17:53:29 2007
Library |(SRV)PGM |Module |Function/Statement No.
|--||--
QSYS |QP2USER2 |QP2API |__Qp2Fork 8
QSYS |QP2USER2 |QP2API |runpase_main__FPi 6
QSYS |QP2USER2 |QP2API |runpase_common__FiPvT2 2
R3640ASVI |O4PRTLIBC |AS4STACK |As4Stack_From_PASE 3
R3640ASVI |O4PRTLIBC |AS4STACK |As4StackOut 10
R3640ASVI |O4PRTLIBC |AS4STACK |_MATINVS2__8O4_StackFv 8
M -
M ***LOG R1B=> ThControl, sap_dext-call (00 ) [thxxdynp.c 355]
M in_ThErrHandle: 1
M *** ERROR => ThControl: illegal sap_dext call !!! (step 1, th_errno 5, action 1, level 1) [thxxhead.c 9564]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M Entering ThSetStatError
M Entering ThReadDetachMode
M ThISend: still inside critical section semaphore ? -
Multiple SAP Systems with one Unique ID
Hi,
SAP recommend to have <sidadm> and <sapserviceSID> user account for each system.
Currently we create domain users for each SAP System. We are installing many test servers and trying to see if I can avoid creating domain user account for each system and use only one account to administer all test sap systems.
Just wanted to know if there is any way to have one domain SIDADM user id and one domain SAPService user account to run multiple test SAP systems?
Thanks,Hi,
Multiple test system you have different SID. so you must use different SAPserviceSID user. But you can use one SIDADM user with the proper permission with other test systems.
I have used in OS400 environment with single SIDADM user id.
please check with users with permission sap notes or document.
But SAP not recommanded this.
Thanks and Regards,
Jibin. -
Unable to start the SAP instance - work processes are terminated
Hello,
We are implementing SAP ECC 6.0 on iSeries, i5/OS V5R4.
The application server & the database server are implemented on one centralized physical iSeries server.
We recently attempted to copy one SAP system (DEV) from one iSeries server to another, through restoring from an Entire System backup.
After successfully conducting the restore onto the new (destination) iSeries server, and conducting all the necessary host name changes to be the same as the host name of the source system, we encountered a problem when trying to start the SAP : all the jobs under sub-system R3_00 are started, except the jobs constituting the SAP work processes; i.e. WP00, WP01, etc.
The following is the file holding the SAP start log :
/usr/sap/<SID>/DVEBMGS00/work/sapstart.log
SAP-R/3-Startup Program Rel 700 V1.8 (2003/04/24)
Starting at 2008/04/07 13:55:49
Startup Profile: "/usr/sap/PRO/SYS/profile/START_DVEBMGS00_MASAPPRO"
Execute Pre-Startup Commands
(47) Local: /usr/sap/PRO/SYS/exe/run/cleanipc 00 remove
(47) Executing "/usr/sap/PRO/SYS/exe/run/cleanipc 00 remove"...
(47) Okay!
(47) Local: CLRLIB LIB(R3WRK00)
(47) Executing CL command "CLRLIB LIB(R3WRK00)"...
(47) Okay!
(47) Local: /usr/sap/PRO/SYS/exe/run/sapmscsa pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -n
(47) Executing "/usr/sap/PRO/SYS/exe/run/sapmscsa pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -n"...
(47) Okay!
Starting Programs
(47) Spawning program "/usr/sap/PRO/SYS/exe/run/saposcol" asynchronously...
(47) Okay, child's pid=52.
(52) Starting: local /usr/sap/PRO/SYS/exe/run/saposcol
(47) Spawning program "/usr/sap/PRO/SYS/exe/run/msg_server pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO" asynchronously...
(47) Okay, child's pid=53.
(53) Starting: local /usr/sap/PRO/SYS/exe/run/msg_server pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO
(47) Spawning program "/usr/sap/PRO/SYS/exe/run/disp+work pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO" asynchronously...
(47) Okay, child's pid=54.
(54) Starting: local /usr/sap/PRO/SYS/exe/run/disp+work pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO
(47) Spawning program "/usr/sap/PRO/SYS/exe/run/rslgcoll pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -F" asynchronously...
(47) Okay, child's pid=55.
(55) Starting: local /usr/sap/PRO/SYS/exe/run/rslgcoll pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -F
(47) Spawning program "/usr/sap/PRO/SYS/exe/run/rslgsend pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -F" asynchronously...
(47) Okay, child's pid=56.
(56) Starting: local /usr/sap/PRO/SYS/exe/run/rslgsend pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO -F
(47) Spawning program "/usr/sap/PRO/SYS/exe/run/igswd_mt -mode=profile pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO" asynchronously...
(47) Okay, child's pid=57.
(57) Starting: local /usr/sap/PRO/SYS/exe/run/igswd_mt -mode=profile pf=/usr/sap/PRO/SYS/profile/PRO_DVEBMGS00_MASAPPRO
(47) Waiting for Child Processes to terminate.
(47) **** 2008/04/07 13:55:56 Child 53 terminated with Status 0 . ****
(47) **** 2008/04/07 13:56:25 Child 54 terminated with Status 0 . ****
Thank you in advance for your cooperation.
Best regards.
Reda KhalifaHello,
I did delete all the SAP-related SQL Packages, using the command : DLTR3PKG, then IPL the server, then try to start the SAP system, but with no success (the same previous status)
As per your request, the following are contents of the four log files :
dev_disp.new, dev_disp, dev_w0, dev_rd :
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno 00
sid PRO
systemid 324 (IBM iSeries with OS400)
relno 7000
patchlevel 0
patchno 98
intno 20050900
make: single threaded, Unicode, 64 bit, optimized
pid 52
Tue Apr 8 13:47:32 2008
kernel runs with dp version 224000(ext=109000) (@(#) DPLIB-INT-VERSION-224000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 52) [dpxxdisp.c 1239]
shared lib "dw_xml.so" version 98 successfully loaded
shared lib "dw_xtc.so" version 98 successfully loaded
shared lib "dw_stl.so" version 98 successfully loaded
shared lib "dw_gui.so" version 98 successfully loaded
shared lib "dw_mdm.so" version 98 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
WARNING => DpNetCheck: NiServToNo(sapdp00) failed (rc=-3)
ERROR => DpNetCheck: NiServToNo(sapgw00) failed (rc=-3) [dpxxtool2.c 5217]
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >MASAPPRO_PRO_00 <
DpShMCreate: sizeof(wp_adm) 50960 (1456)
DpShMCreate: sizeof(tm_adm) 27955928 (27928)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
DpShMCreate: sizeof(comm_adm) 548064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1848)
DpShMCreate: sizeof(wall_adm) (200056/174328/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0x700000080000000, size: 28969592)
DpShMCreate: allocated sys_adm at 0x700000080000000
DpShMCreate: allocated wp_adm at 0x700000080001ee8
DpShMCreate: allocated tm_adm_list at 0x70000008000e5f8
DpShMCreate: allocated tm_adm at 0x70000008000e658
DpShMCreate: allocated wp_ca_adm at 0x700000081ab7930
DpShMCreate: allocated appc_ca_adm at 0x700000081abd6f0
DpShMCreate: allocated comm_adm at 0x700000081abf630
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x700000081b45310
DpShMCreate: allocated gw_adm at 0x700000081b45390
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0x700000081b453c0
DpShMCreate: allocated wall_adm at 0x700000081b453c8
Tue Apr 8 13:47:33 2008
MBUF state OFF
DpCommInitTable: init table for 500 entries
ERROR => DpIPCInit2: NiServToNo failed ((null)--3) [dpxxtool2.c 511]
DP_FATAL_ERROR => DpSapEnvInit: DpIPCInit2
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Apr 8 13:47:43 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Tue Apr 8 11:47:43 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
0 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
1 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
2 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
3 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
4 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
5 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
6 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
7 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
8 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
9 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
10 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
11 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
12 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
13 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
14 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
15 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
16 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
17 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
18 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
19 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
20 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
21 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
22 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
23 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
24 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
25 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
26 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
27 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
28 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
29 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
30 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
31 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
32 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
33 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
34 ? -1 Free no 0 0 0
Dispatcher Queue Statistics Tue Apr 8 11:47:43 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
ERROR => DpMQueueInfo: DpQueueInfo [dpxxtool.c 2032]
Dump of tm_adm structure: Tue Apr 8 11:47:43 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Tue Apr 8 11:47:43 2008
=============================
Slots: 300, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Apr 8 13:47:48 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >MASAPPRO_PRO_00 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect: shmat key 57 prot 3/0 done
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect: shmat key 57 prot 1/4096 done
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
ERROR => EvtSet: Ill. Event Handle = 0 [evtux.c 1228]
ERROR => DpWakeUpWps: EvtSet (rc=2) [dpxxdisp.c 10923]
Stop work processes
Terminate gui connections
wait for end of work processes
not attached to the message server
cleanup EM
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
ShmCreate( 76, 0, 2, 0x0x1808c5508 )
ShmKeyPermission( 76 ) = 0777 (octal)
cleanup event management
cleanup shared memory/semaphores
ShmCleanup SHM_SYS_ADM_KEY
ShmCleanup( 1 )
ShmCreate( 1, 0, 2, 0x0xfffffffffffe990 )
ShmProtect( 1, 3 )
ShmProtect: shmat key 1 prot 3/0 done
ShmCreate( 1, 0, 2, -> 0x0x700000070000000 )
ShmCleanup SHM_DP_ADM_KEY
ShmCleanup( 2 )
ShmCreate( 2, 0, 2, 0x0xfffffffffffe990 )
ShmProtect( 2, 3 )
ShmProtect: shmat key 2 prot 3/0 done
ShmCreate( 2, 0, 2, -> 0x0x700000080000000 )
ShmCleanup SHM_DP_CA_KEY
ShmCleanup( 3 )
ShmCreate( 3, 0, 2, 0x0xfffffffffffe990 )
ShmProtect( 3, 3 )
ShmProtect: shmat key 3 prot 3/0 done
ShmCreate( 3, 0, 2, -> 0x0x700000090000000 )
ShmCleanup SHM_PF_KEY
ShmCleanup( 4 )
ShmCreate( 4, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 4 ) = 0777 (octal)
ShmCleanup SHM_PRES_BUF
ShmCleanup( 14 )
ShmCreate( 14, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 14 ) = 0777 (octal)
ShmCleanup SHM_CALI_BUFFER
ShmCleanup( 11 )
ShmCreate( 11, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 11 ) = 0777 (octal)
ShmCleanup SHM_DB_TBUFF
ShmCleanup( 19 )
ShmCreate( 19, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 19 ) = 0777 (octal)
ShmCleanup SHM_DB_TBUFF_P
ShmCleanup( 33 )
ShmCreate( 33, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 33 ) = 0777 (octal)
ShmCleanup SHM_DB_STBUFF
ShmCleanup( 41 )
ShmCreate( 41, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 41 ) = 0777 (octal)
ShmCleanup SHM_DB_TTBUFF
ShmCleanup( 42 )
ShmCreate( 42, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 42 ) = 0777 (octal)
ShmCleanup SHM_DB_FTBUFF
ShmCleanup( 43 )
ShmCreate( 43, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 43 ) = 0777 (octal)
ShmCleanup SHM_DB_SNTBUFF
ShmCleanup( 45 )
ShmCreate( 45, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 45 ) = 0777 (octal)
ShmCleanup SHM_DB_IRBUFF
ShmCleanup( 44 )
ShmCreate( 44, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 44 ) = 0777 (octal)
ShmCleanup SHM_DB_OBJ_BUFFER
ShmCleanup( 54 )
ShmCreate( 54, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 54 ) = 0777 (octal)
ShmCleanup SHM_DB_SYNC
ShmCleanup( 46 )
ShmCreate( 46, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 46 ) = 0777 (octal)
ShmCleanup SHM_DB_CUA_BUFFER
ShmCleanup( 47 )
ShmCreate( 47, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 47 ) = 0777 (octal)
ShmCleanup SHM_DB_OTR_BUFFER
ShmCleanup( 64 )
ShmCreate( 64, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 64 ) = 0777 (octal)
ShmCleanup SHM_DB_ESM_BUFFER
ShmCleanup( 65 )
ShmCreate( 65, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 65 ) = 0777 (octal)
ShmCleanup SHM_ROLL_AREA_KEY
ShmCleanup( 9 )
ShmCreate( 9, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 9 ) = 0777 (octal)
ShmCleanup SHM_PAGING_AREA_KEY
ShmCleanup( 8 )
ShmCreate( 8, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 8 ) = 0777 (octal)
ShmCleanup SHM_ROLL_ADM_KEY
ShmCleanup( 17 )
ShmCreate( 17, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 17 ) = 0777 (octal)
ShmCleanup SHM_PAGING_ADM_KEY
ShmCleanup( 18 )
ShmCreate( 18, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 18 ) = 0777 (octal)
ShmCleanup SHM_PXA_KEY
ShmCleanup( 6 )
ShmCreate( 6, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 6 ) = 0777 (octal)
ShmCleanup SHM_ENQ_TABLE_KEY
ShmCleanup( 34 )
ShmCreate( 34, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 34 ) = 0777 (octal)
ShmCleanup SHM_ENQID_KEY
ShmCleanup( 58 )
ShmCreate( 58, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 58 ) = 0777 (octal)
ShmCleanup SHM_VB_ADM_KEY
ShmCleanup( 7 )
ShmCreate( 7, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 7 ) = 0777 (octal)
ShmCleanup SHM_DB_POOL
ShmCleanup( 40 )
ShmCreate( 40, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 40 ) = 0777 (octal)
ShmCleanup SHM_ES2_ADM
ShmCleanup( 76 )
ShmCreate( 76, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 76 ) = 0777 (octal)
ShmCleanup SHM_EM_ADM
ShmCleanup( 51 )
ShmCreate( 51, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 51 ) = 0777 (octal)
ShmCleanup SHM_EM2_ADM
ShmCleanup( 77 )
ShmCreate( 77, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 77 ) = 0777 (octal)
ShmCleanup SHM_EG2_ADM
ShmCleanup( 78 )
ShmCreate( 78, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 78 ) = 0777 (octal)
ShmCleanup SHM_MSBUF
ShmCleanup( 52 )
ShmCreate( 52, 0, 2, 0x0xfffffffffffe990 )
ShmProtect( 52, 3 )
ShmProtect: shmat key 52 prot 3/0 done
ShmCreate( 52, 0, 2, -> 0x0x7000000a0000000 )
ShmCleanup SHM_THRUN_ADM_KEY(th run adm)
ShmCleanup( 30 )
ShmCreate( 30, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 30 ) = 0777 (octal)
ShmCleanup SHM_JAVA
ShmCleanup( 70 )
ShmCreate( 70, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 70 ) = 0777 (octal)
ShmCleanup SHM_PF_AS_KEY(Appl.Statistics)
ShmCleanup( 56 )
ShmCreate( 56, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 56 ) = 0777 (octal)
ShmCleanup SHM_POOL_0
ShmCleanup( 10 )
ShmCreate( 10, 0, 2, 0x0xfffffffffffe990 )
ShmKeyPermission( 10 ) = 0777 (octal)
ShmCleanup SHM_PROFILE
ShmCleanup( 57 )
ShmCreate( 57, 0, 2, 0x0xfffffffffffe990 )
ShmProtect( 57, 3 )
ShmProtect: shmat key 57 prot 3/0 done
ShmCreate( 57, 0, 2, -> 0x0x700000020000000 )
MiCleanup:
ShmCleanup( 62 )
ShmCreate( 62, 0, 2, 0x0xfffffffffffe900 )
ShmKeyPermission( 62 ) = 0777 (octal)
ERROR => ShmCleanup(62) failed 3 [mpixx.c 3239]
MpiCleanup() -> 1
removing Semaphore-Management
Sem2Lock: LockObjPtr = 0x700000030000158, Yield = 1
ERROR => e=2 semctl(4,0,IPC_RMID,..) (2: No such file or directory) [semux.c 2098]
removing request queue
ShmCleanup( 31 )
ShmCreate( 31, 0, 2, 0x0xfffffffffffe910 )
ShmKeyPermission( 31 ) = 0777 (octal)
ERROR => DpRqIQRemove: ShmDelete [dpxxqueu.c 431]
closing connect handles (dgm + tcp)
***LOG Q05=> DpHalt, DPStop ( 52) [dpxxdisp.c 10594]
shutdown completed - server stopped ***
Good Bye .....
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno 00
sid PRO
systemid 324 (IBM iSeries with OS400)
relno 7000
patchlevel 0
patchno 98
intno 20050900
make: single threaded, Unicode, 64 bit, optimized
pid 9197
Thu Jan 31 05:54:08 2008
kernel runs with dp version 224000(ext=109000) (@(#) DPLIB-INT-VERSION-224000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 9197) [dpxxdisp.c 1239]
shared lib "dw_xml.so" version 98 successfully loaded
shared lib "dw_xtc.so" version 98 successfully loaded
shared lib "dw_stl.so" version 98 successfully loaded
shared lib "dw_gui.so" version 98 successfully loaded
shared lib "dw_mdm.so" version 98 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >MASAPPRO_PRO_00 <
DpShMCreate: sizeof(wp_adm) 50960 (1456)
DpShMCreate: sizeof(tm_adm) 27955928 (27928)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
DpShMCreate: sizeof(comm_adm) 548064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1848)
DpShMCreate: sizeof(wall_adm) (200056/174328/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0x700000080000000, size: 28969592)
DpShMCreate: allocated sys_adm at 0x700000080000000
DpShMCreate: allocated wp_adm at 0x700000080001ee8
DpShMCreate: allocated tm_adm_list at 0x70000008000e5f8
DpShMCreate: allocated tm_adm at 0x70000008000e658
DpShMCreate: allocated wp_ca_adm at 0x700000081ab7930
DpShMCreate: allocated appc_ca_adm at 0x700000081abd6f0
DpShMCreate: allocated comm_adm at 0x700000081abf630
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x700000081b45310
DpShMCreate: allocated gw_adm at 0x700000081b45390
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0x700000081b453c0
DpShMCreate: allocated wall_adm at 0x700000081b453c8
MBUF state OFF
DpCommInitTable: init table for 500 entries
Thu Jan 31 05:54:09 2008
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
<ES> Info: use normal pages (no huge table support available)EsStdUnamFileMapInit: ES base = 0x0x7000000d0000000
EsStdInit: Extended Memory 12288 MB allocated
<ES> 3071 blocks reserved for free list.
ES initialized.
Thu Jan 31 05:54:14 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:14 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:14 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:15 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:15 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:15 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:16 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:16 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:17 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:17 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:18 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:18 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:45 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:45 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:47 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:49 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:51 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:54:53 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:00 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:02 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:03 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:06 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:08 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:13 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:14 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:18 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:21 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:23 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:25 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:27 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:27 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:28 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:29 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:30 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:32 2008
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1626]
***LOG Q0K=> DpMsAttach, mscon ( MASAPPRO) [dpxxdisp.c 11664]
DpStartStopMsg: send start message (myname is >MASAPPRO_PRO_00 <)
DpStartStopMsg: start msg sent
Thu Jan 31 05:55:32 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 05:55:34 2008
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 98
Release check o.K.
Thu Jan 31 05:56:06 2008
MBUF state ACTIVE
Thu Jan 31 05:56:07 2008
DpModState: change server state from STARTING to ACTIVE
Thu Jan 31 05:57:28 2008
change reqtype of W0 from 1 to 4
***LOG Q0V=> DpAdXWpConf, mod_req ( 0DIABTC) [dpxxdisp.c 13661]
change reqtype of W1 from 1 to 4
***LOG Q0V=> DpAdXWpConf, mod_req ( 1DIABTC) [dpxxdisp.c 13661]
Thu Jan 31 08:00:55 2008
change reqtype of W0 from 4 to 1
***LOG Q0V=> DpAdXWpConf, mod_req ( 0BTCDIA) [dpxxdisp.c 13661]
change reqtype of W1 from 4 to 1
***LOG Q0V=> DpAdXWpConf, mod_req ( 1BTCDIA) [dpxxdisp.c 13661]
Thu Jan 31 08:44:38 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 12 / sock 19
(SI_ECONN_BROKEN/73; I4; ST; 10.2.4.135:1179) [nixxi.cpp 4248]
Network error of client T42, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T42 is 10.2.4.135(10.2.4.135)
***LOG Q04=> DpRTmPrep, NiBufReceive (347 ALSALI 42 training4 ) [dpxxdisp.c 11375]
RM-T42, U347, 900 ALSALI, training4, 08:44:28, M0, W1, SBWP, 2/1
Thu Jan 31 09:09:27 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 77 / sock 84
(SI_ECONN_BROKEN/73; I4; ST; 10.2.3.76:1233) [nixxi.cpp 4248]
Network error of client T109, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T109 is 10.2.3.76(10.2.3.76)
***LOG Q04=> DpRTmPrep, NiBufReceive (462 ASEDKY 109 amrsedke ) [dpxxdisp.c 11375]
RM-T109, U462, 900 ASEDKY, amrsedke, 08:49:14, M0, W1, VA05, 2/1
Thu Jan 31 09:55:17 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 49 / sock 56
(SI_ECONN_BROKEN/73; I4; ST; 10.2.14.50:1158) [nixxi.cpp 4248]
Network error of client T81, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T81 is 10.2.14.50(10.2.14.50)
***LOG Q04=> DpRTmPrep, NiBufReceive (364 MHASSAN 81 Motazhassan ) [dpxxdisp.c 11375]
RM-T81, U364, 900 MHASSAN, Motazhassan, 09:54:12, M1, W6, , 4/2
Thu Jan 31 09:55:27 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 108 / sock 51
(SI_ECONN_BROKEN/73; I4; ST; 10.2.14.52:1158) [nixxi.cpp 4248]
Network error of client T168, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T168 is 10.2.14.52(10.2.14.52)
***LOG Q04=> DpRTmPrep, NiBufReceive (1380 MKADY 168 AtaFathy ) [dpxxdisp.c 11375]
RM-T168, U1380, 900 MKADY, AtaFathy, 09:54:12, M0, W3, ZSDS, 2/2
Thu Jan 31 10:01:29 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 122 / sock 129
(SI_ECONN_BROKEN/73; I4; ST; 10.2.14.53:1144) [nixxi.cpp 4248]
Network error of client T67, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T67 is 10.2.14.53(10.2.14.53)
***LOG Q04=> DpRTmPrep, NiBufReceive (1230 MALGOHARY 67 Mohamedelgoh) [dpxxdisp.c 11375]
RM-T67, U1230, 900 MALGOHARY, Mohamedelgohary, 09:41:13, M0, W2, FBCJ, 2/1
Thu Jan 31 10:21:30 2008
ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 100 (60secs)-> disconnecting [dpxxdisp.c 12158]
RM-T100, U402, 900 EABDELHAKAM, EmanHakam, 10:00:29, M1, W1, , 3/1
Thu Jan 31 10:25:50 2008
ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 65 (60secs)-> disconnecting [dpxxdisp.c 12158]
RM-T65, U1129, 900 MSAAD, MOHAMMEDSAAD, 10:04:38, M0, W6, , 2/0
Thu Jan 31 10:27:50 2008
ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 189 (60secs)-> disconnecting [dpxxdisp.c 12158]
RM-T189, U1638, 000 , MaryRose2, 10:06:37, M0, W5, SESS, 2/0
Thu Jan 31 11:01:54 2008
SoftCancel request for T107 U2249 M1 received from REMOTE_TERMINAL
Thu Jan 31 11:05:12 2008
ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 188 (60secs)-> disconnecting [dpxxdisp.c 12158]
RM-T188, U2347, 900 MABDELGHANY, ManStore, 10:43:54, M0, W10, , 2/0
Thu Jan 31 11:12:30 2008
Network error of client T190, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T190 is 10.2.6.71(10.2.6.71)
***LOG Q04=> DpRTmPrep, NiBufReceive (2917 HAEZZ 190 hanyezzeldin) [dpxxdisp.c 11375]
RM-T190, U2917, 900 HAEZZ, hanyezzeldin, 11:12:18, M0, W3, VELO, 2/1
Thu Jan 31 11:13:14 2008
ERROR => DpRqCheck: T190 in state TM_SLOT_FREE [dpxxdisp.c 6846]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 5196]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5991): [dpxxdisp.c 5198]
-IN-- sender_id DISPATCHER tid 190 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_WP uid 2917 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len -1 rq_id 38334
-IN-- req_info LOGOFF CANCELMODE
ERROR => DpRqCheck: T190 in state TM_SLOT_FREE [dpxxdisp.c 6846]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 5196]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5991): [dpxxdisp.c 5198]
Thu Jan 31 11:13:15 2008
-IN-- sender_id DISPATCHER tid 190 wp_ca_blk 4 wp_id 0
-IN-- action SEND_TO_WP uid 2917 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len 8 rq_id 40183
-IN-- req_info LOGOFF CANCELMODE
Thu Jan 31 11:16:53 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 57 / sock 64
(SI_ECONN_BROKEN/73; I4; ST; 10.2.7.139:1185) [nixxi.cpp 4248]
Network error of client T86, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T86 is 10.2.7.139(10.2.7.139)
***LOG Q04=> DpRTmPrep, NiBufReceive (834 RMOAWAD 86 roshdimoawad) [dpxxdisp.c 11375]
RM-T86, U834, 900 RMOAWAD, roshdimoawad, 10:56:06, M1, W12, FBL5, 3/2
Thu Jan 31 11:19:13 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 105 / sock 112
(SI_ECONN_BROKEN/73; I4; ST; 10.2.7.120:1207) [nixxi.cpp 4248]
Network error of client T143, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T143 is 10.2.7.120(10.2.7.120)
***LOG Q04=> DpRTmPrep, NiBufReceive (552 IFEKRY 143 ibrahimfekry) [dpxxdisp.c 11375]
RM-T143, U552, 900 IFEKRY, ibrahimfekry, 11:19:06, M0, W1, FB01, 3/1
Thu Jan 31 11:56:01 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:56:43 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:56:46 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:57:50 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:59:14 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:59:41 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:59:47 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:59:49 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:59:50 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 11:59:53 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:01 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:02 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:03 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:04 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:05 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:07 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:08 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:09 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:12 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:15 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:00:20 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:19:50 2008
DpHdlDeadWp: restart wp (pid=9213) automatically
Thu Jan 31 12:19:56 2008
Network error of client T180, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Thu Jan 31 12:19:56 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 12:19:57 2008
Client address of T180 is 10.2.6.71(10.2.6.71)
***LOG Q04=> DpRTmPrep, NiBufReceive (2942 HAEZZ 180 hanyezzeldin) [dpxxdisp.c 11375]
RM-T180, U2942, 900 HAEZZ, hanyezzeldin, 11:51:33, M0, W0, VELO, 2/1
Thu Jan 31 12:19:58 2008
ERROR => DpRqCheck: mode 0 in status CANCEL [dpxxdisp.c 6908]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 5196]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5991): [dpxxdisp.c 5198]
-IN-- sender_id REMOTE_TERMINAL tid 180 wp_ca_blk 5 wp_id -1
-IN-- action SEND_TO_WP uid 2942 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len 375 rq_id 49950
Thu Jan 31 12:21:27 2008
ERROR => W0 (pid 9340) died [dpxxdisp.c 14319]
Thu Jan 31 12:21:29 2008
DpSetProcessPriority: Run priority for work process startup adjusted to 20
Thu Jan 31 12:30:53 2008
***LOG Q0I=> NiIRead: recv (73: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 52 / sock 158
(SI_ECONN_BROKEN/73; I4; ST; 10.2.5.110:1255) [nixxi.cpp 4248]
Network error of client T113, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T113 is 10.2.5.110(10.2.5.110)
***LOG Q04=> DpRTmPrep, NiBufReceive (2713 MMAGDY 113 MOHAMEDMAGDI) [dpxxdisp.c 11375]
RM-T113, U2713, 900 MMAGDY, MOHAMEDMAGDI, 12:27:33, M1, W8, FB1D, 4/2
Thu Jan 31 12:39:20 2008
SoftCancel request for T117 U2416 M1 received from REMOTE_TERMINAL
Thu Jan 31 12:54:32 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:56:17 2008
WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
Thu Jan 31 12:59:34 2008
ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 108 (60secs)-> disconnecting [dpxxdisp.c 12158]
RM-T108, U4450, 900 EABDELHAKAM, EmanHakam, 12:38:22, M0, W7, FTR0, 2/2
Thu Jan 31 13:06:12 2008
ERROR => DpRqCheck: T162 in state TM_SLOT_FREE [dpxxdisp.c 6846]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 5196]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5991): [dpxxdisp.c 5198] -
Hi,
We're running our Production BI 7.0 System on Os400 V5R4 with 8 CPU and 64 GB RAM. Currently project is not live and very small amount of users are accessing the system.
Portal and BI Java are running on a seperate Windows System.
The problem we noticed that is;
- SAPGUI access is very good to BI System and we are happy with response times.
- But when we call BI Web Reports via HTTP, it takes very long time to load the initial query screen and then result screen.
We wonder if there are specific HTTP Settings for OS400 and for BI on OS400.
RegardsHello Huseyin,
How is the response time when reporting from BEx (Excel-like interface)?
If it is good, please look at tuing for SAPhttp and/or ICM of SAP. Native http of OS/400 is not being used, from my understanding.
If not, there are many specific BI/BW settings for DB2/400 (OS400), like Note 307077...
Best regards,
Victor -
Saposcol not running in OS400 - how to start in OS level
Hi everyone,
I am new to iSeries and I'm having trouble starting saposcol. My system is running in OS400 SAP ECC6.0 Kernel release 700.
ST06 is not displaying updated data so I killed the saposcol process in the OS level using <sid>OFR user. Everytime i tried to submit a job CALL PGM(SAPOSCOL) PARM ('-l') to start it, i only get the message "Job 040584/<sid>OFR/SAPOSCOL submitted to job queue QBATCH in library QGPL." But nothing happens after that.
When I check job queue QBATCH, it doesnt contain any job. I displayed all the jobs and found out that all the saposcol I called is in the OUTQ status. I still get the saposcol not runing error in ST06. I tried starting it in ST06 but it still gives me the error that saposcol is not running, shared memory not available. Can anyone please tell me how to start the saposcol? Thanks.Hi Sheryl,
We have had numerous problems with our OS Collector for the last several years too. I have a few steps that I follow to start the OS Collector when our collector fails.
1 - Make sure saposcol is using the latest patch from service.sap.com.
2 - Sign on to system as <SID>OFR and run the following commands.
CALL PGM(SAPOSCOL) PARM('-d')
Brings up the saposcol program in a dialog mode for commands to be keyed
key in the following in the saposcol dialog: clean
Cleans shared memory
key in the following: quit
Stop the OS collector with the following command:
CALL PGM(SAPOSCOL) PARM('-k')
key in the following in the saposcol dialog: leave
a message "shared memory deleted" or "shared memory not attached" should be displayed
key in the following: quit
Change directory to /usr/sap/tmp and rename file coll.put (rename to coll.put.old)
Try to start the OS Collector from ST06. Wait about 5 minutes and refresh statistics.
3 - Open a customer message with SAP. SAP has been very helpful with our saposcol restarts.
Hope this helps!
Traci -
I am currently running ECC 6 on an iSeries/OS400 with DB2. The system is adequate for the number of users that I currently have but i am about to add MM and SD to the system, therefore adding users, and do not belive that the system is sized adequately. I am in the process of sizing but also thinking of migrating from OS400 to Windows/SQL. I've done some research to see what is needed for this migration but what I'm looking for are opinions on migrating or war stories. I would like to know what your opinions are (should I stay with OS400 DB2 or jump to Windows), if you have performed a migration yourself, pros and cons to doing so, etc..
Also, can anyone point me in the direction of statistics that show what percentage of people run on the iSeries vs Windows?Hi Bob,
first of all:
YOU should make a decision on the platform yourself and that should be definetely based on the knowledge in your company. There is no use at all with an SAP system, that nobody can support. If this works for both platforms, you could think on a migration.
Statistics are not out to my best knowledge, but that should not be the point here - the system should fit to YOUR COMPANY. Therefore, YOU need to be happy with that one.
You can run SAP reliable, fast & stable on any platform IF you and your consultants are used to that platform.
Pros & Cons ?
I would say, everything works the same from the standpoint of endusers. You in the basis will have to work a lot different ...
If you are using only official interfaces, the change is pretty easy. If you are using direct access to the database with DDMFs or CRTSAPLF or similar, this looks different, this all needs to be changed.
We did many migrations in all directions, but we never try to convince, or even worth - persuade - customers on such decisions. Customers have to make this decision (and later have to live with that) and then we can do the technical job, that is needed, in order to reach this goal on a reliable basis.
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de
Maybe you are looking for
-
Duplicate calendar events mac to iphone
I haven't found anyone yet who knows how to fix this problem. My iCal sends 3 or 4 of the same calendar event to my iPhone. I can't believe it was easier to sync iCal with my old Blackberry. Before I look into downloading a different calendar appl
-
Experiencing an issue with opening a PDF doc in Chrome. I receive a dialogue box stating that I must launch Adobe and accept End User License Agreement. this has just happened in the past few weeks...PDF
-
JDBC connection in EJB (Sorry i know this is a JSP forum but someone might have the a
In EJBs, we can always spawn a JDBC connection using the internal server side driver through defaultConnection() or kprb. My question is, can we spawn any other kind of connection from an EJB to another database on some remote machine, this would inv
-
Problem in getting spool number of a background job.
Hi all, In a Z program I am calling a standard program to run as background job. I need to get the report o/p of the standard program. For this I need the spool no of the background job. Now I am querying on table tbtcp by giving jobname. Program nam
-
HT3275 The backup disk image "/Volumes/Data/Macintosh.sparsebundle" is already in use.
What do I do to fix this: The backup disk image "/Volumes/Data/Macintosh.sparsebundle" is already in use.