SAP PCo, OLEDB Source Error

Hi gurus,
I'm trying to start a PCo agent using a OLEDB connection and I'm getting the following error. All the "Connection Check" buttons (At ODBC DSN and at PCo)  says the connection is OK.
At PCo, I have created the OLEDB source and selected the default provider, there is no .Net Framework Data Provider for ODBC on the list.
Any suggestion? I didn't even find where to download this .Net Framework Data Provider for ODBC.
26/5/2011 14:24:04,.,1,2244,Teste,Error,Host,failed to create ConnectivityAgentProxy,"General PCo Fault: The .Net Framework Data Provider for OLEDB (System.Data.OleDb) does not support the Microsoft OLE DB Provider for ODBC Drivers (MSDASQL). Use the .Net Framework Data Provider for ODBC (System.Data.Odbc).

Diana,
When trying to connect UDS to IP21 using the "xMII OLE DB UDS" server type in UDS, I'm getting the following error:
Start of Exception Stack Trace **********
            1)         [06/09/2011-10:47:05.374] OLEDBTU [P:3268, T:5580,       UDS, ] 0x0      HRESULT: 0x80004005 [[AspenTech][SQLplus] SQLplus Access Denied - No read access]           [Connection.cpp @ 85, COleDbConnection::FinalInitialize]
            2)         [06/09/2011-10:47:05.374] OLEDBTU [P:3268, T:5580,       UDS, RETHROW] 0x0  Rethrowing exception.            [Connection.cpp @ 111, COleDbConnection::FinalInitialize]
            3)         [06/09/2011-10:47:05.374] OLEDBTU [P:3268, T:5580,       UDS, RETHROW] 0x0  Rethrowing exception over COM.    [sqlUtil/lhdsBasicConnection.h @ 290, lhds::LHDSBasicConnectionImpl<class COleDbConnection>::Initialize]
            4)         [06/09/2011-10:47:05.374] OLEDBTU [P:3268, T:5580,       UDS, ] 0x0      Caught exception over a COM boundry.            [sqlUtil/lhdsBasicConnectedDs.h @ 65, lhds::LHBasicDataServerImpl<class CLHOleDbDataServer>::InitializeRuntime]
            5)         [06/09/2011-10:47:05.374] OLEDBTU [P:3268, T:5580,       UDS, RETHROW] 0x0  Rethrowing exception over COM.    [sqlUtil/lhdsBasicConnectedDs.h @ 100, lhds::LHBasicDataServerImpl<class CLHOleDbDataServer>::InitializeRuntime]
            6)         [06/09/2011-10:47:05.374] OLEDBTU [P:3268, T:5580,       UDS, ] 0x0      Caught exception over a COM boundry.            [sqlUtil/lhdsBasicConnectedDs.h @ 292, lhds::LHBasicDataServerImpl<class CLHOleDbDataServer>::Initialize]
            7)         [06/09/2011-10:47:05.374] OLEDBTU [P:3268, T:5580,       UDS, RETHROW] 0x0  Rethrowing exception.            [sqlUtil/lhdsBasicConnectedDs.h @ 294, lhds::LHBasicDataServerImpl<class CLHOleDbDataServer>::Initialize]
            8)         [06/09/2011-10:47:05.374] OLEDBTU [P:3268, T:5580,      Host, HANDLED] 0x0    Handled exception.            [DataServerThread.cpp @ 117, DataServerThread::SpawnServer]
End of Exception Trace **************
Do you have any clue of what is wrong?
Until now I do not have a historical connection with IP21 since PCo and UDS return errors.
Thank you in advance

Similar Messages

  • SAP PCo 2.1 - Error Retrieving destination systems

    Hi All,
    I've configured source and destination systems successfully in PCo Mgmt console and created an agent instance.
    While creating notification under agent instance, I'm getting an error - "Error retrieving destination systems \[key not valid for use in specified state\]".
    Can anyone guide over this error ?
    Thanks and Regards,
    Sumit.

    Hi Tony,
    From your error description, I suspect that the management console is starting without administrative priviledges. Can you check and make sure you are starting the management console with administrator rights?
    You may also want to take a look at the PCo Security Guide available at [http://help.sap.com].
    Kind Regards,
    Diana Hoppe
    Edited by: Diana Hoppe on May 23, 2011 8:21 AM

  • Error while starting SAP PCo 2.1

    Hi,
       When i start the Management Console of SAP PCo 2.1, I get an error which says 'Error Retreiving Destination Systems.  [Access to the database file is not allowed. [File Name: C:\Program Files ....\Configuration.sdf' ]].
       Any clue of why this happens. It was working fine earlier, but suddenly I get this error msg.
    Regards,
    Tony.

    Hi Tony,
    From your error description, I suspect that the management console is starting without administrative priviledges. Can you check and make sure you are starting the management console with administrator rights?
    You may also want to take a look at the PCo Security Guide available at [http://help.sap.com].
    Kind Regards,
    Diana Hoppe
    Edited by: Diana Hoppe on May 23, 2011 8:21 AM

  • OLEDB Source sql query with parameter

    I have a dataflow  in a for each loop container.The OLEDB Source is pointing to oracle database.The sql query to fetch the data should take a variable value.
    Example : select * from tablename where colname = @variablevalue
    the variable value changes each time since the dataflow is in a for each loop container.
    can anyone please help me configuring the source??
    when i try to use ? i get the following error message
    Thanks,
    Rahul

    I can't troubleshoot that error as i don't have a Oracle source to test. See this - 
    http://microsoftdw.blogspot.com/2005/11/parameterized-queries-against-oracle.html
    Try -
    1. Create a int variable vBatchIndex (this would be your parameter which you are trying to pass) and provide the value
    2. Create another string variable vSQLQuery > Go to Variable properties > Set the "EvaluateAsExpression" property to "True"
    3. Under the variable properties > Go to Expression > and provide this expression as 
    "SELECT * FROM fc_batch_report WHERE batch_index= " + (DT_WSTR, 10) @[User::vBatchIndex]
    4.Next ,go to OLE DB Source > Select the Data access mode - SQL command from variable
    5.Select the variable name - vSQLQuery 
    Narsimha

  • SSIS 2012 ETL is failing only at one server (No BIDS) but running successfully from BIDS on different sever . In this ETL, I have used Stored Procedure in OLEDB Source.

    Hi Guys,
    SSIS 2012 ETL is failing only at one server (No BIDS) but running successfully from BIDS on different sever . In this ETL, I have used Stored Procedure in OLEDB Source.
    Note: I have couple of ETLs developed in 2005 using same logic and upgraded to 2012, working perfectly.
    I am getting Error Message:
    SSIS
    Error Code
    DTS_E_OLEDBERROR. 
    An OLE DB
    error has occurred.
    Error code: 0x80004005.
    An
    OLE DB
    record is available. 
    Source: "Microsoft OLE DB Provider for SQL Server" 
    Hresult: 0x80004005 
    Description: "Error converting data type varchar to datetime.".
    Unable
    to retrieve
    column information
    from the data
    source. Make
    sure your target
    table in
    the database is
    available.
    "OLE DB Source"
    failed validation
    and returned
    validation status
    "VS_ISBROKEN".
    I tried below word around and found It is working perfectly.
    I loaded data into a table (dbo.TEMP) using Stored procedure and then I used this dbo.TEMP table in OLEDB source and then found no issue.
    MY SP Details: (This SP I am calling in OLEDB source of ETL) and when I run it from one server IT is working fine and when I run from ETL dedicated Server getting error:   Guys Help me out.
    USE
    [TEST_DB]
    GO
    SET
    ANSI_NULLS ON
    GO
    SET
    QUOTED_IDENTIFIER ON
    GO
    ALTER
    PROCEDURE  [DBO].[SP_TEST]
    --EXEC [DBO].[SP_TEST] '2014-09-30','2014-10-01'
    @FROMDATETIME
    DATETIME,
    @TODATETIME
    DATETIME
    AS
    SET
    NOCOUNT ON
    BEGIN
    DECLARE
    @FROMDATEKEY INT,
    @TODATEKEY INT,
    SET
    @FROMDATEKEY=
    CONVERT(VARCHAR(10),@FROMDATETIME,112)
    SET
    @TODATEKEY=
    CONVERT(VARCHAR(10),@TODATETIME,112)
    IF 1 = 1
    BEGIN
    SELECT
    CAST(NULL
    AS DATETIME) 
    AS TXN_DATE
    , CAST(NULL
    AS DATETIME
    ) AS PROCESS_DATE     
    , CAST(NULL
    AS money)
    AS  S1_AMT
    , CAST(NULL
    AS money)
    AS  S2_AMOUNT
    , CAST(NULL
    AS money)
    AS  S2_INVALID_AMOUNT
    , CAST(NULL
    AS money)
    AS  INVALID_MOVED_IN_VALID_S2_AMOUNT
    , CAST(NULL
    AS VARCHAR(20))
    AS SYSTEM_ID
    , CAST(NULL
    AS money)
    AS  S3_AMT
    END
    SELECT
    TXN_DATE
    ,PROCESS_DATE
    ,S1_AMT
    ,S2_AMOUNT
    ,S2_INVALID_AMOUNT
    ,INVALID_MOVED_IN_VALID_S2_AMOUNT
    ,SYSTEM_ID
    S3_AMT
    FROM
    DBO.TABLE_1
    WHERE TNX_DATE_KEY
    BETWEEN @FROMDATEKEY
    and @TODATEKEY
    UNION
    ALL
    SELECT
    TXN_DATE
    ,PROCESS_DATE
    ,S1_AMT
    ,S2_AMOUNT
    ,S2_INVALID_AMOUNT
    ,INVALID_MOVED_IN_VALID_S2_AMOUNT
    ,SYSTEM_ID
    S3_AMT
    FROM
    DBO.TABLE_2
    WHERE TNX_DATE_KEY
    BETWEEN @FROMDATEKEY
    and @TODATEKEY
    UNION
    ALL
    SELECT
    TXN_DATE
    ,PROCESS_DATE
    ,S1_AMT
    ,S2_AMOUNT
    ,S2_INVALID_AMOUNT
    ,INVALID_MOVED_IN_VALID_S2_AMOUNT
    ,SYSTEM_ID
    S3_AMT
    FROM
    DBO.TABLE_3
    WHERE TNX_DATE_KEY
    BETWEEN @FROMDATEKEY
    and @TODATEKEY
    END
    Data Source Mode: SQL Command for Variable
    "EXEC [DBO].[SP_TEST]  '"+ (DT_WSTR, 24) @[User::V_EXTRACT_FROM_DT]  +"','"+ (DT_WSTR, 24) @[User::V_EXTRACT_TO_DT]  +"'"
    Where variable @[User::V_EXTRACT_FROM_DT] and @[User::V_EXTRACT_TO_DT] is defined as DATETIME 
    Thanks Shiven:) If Answer is Helpful, Please Vote

    Hi,
    Yes you are right. At one sever where I was getting error, DateTime was in USA format and Where It was running successfully was in AUS format.
    I changed from USA to AUS and I did another changes:
    Data Source Mode: SQL
    Command
    EXEC  [DBO].[SP_TEST] 
    @FROMDATETIME = ?,
    @TODATETIME = ?
    and It is working fine.
    Thanks Shiven:) If Answer is Helpful, Please Vote

  • SAP DEV migration process error

    Hi all,
    SAP DEV migration process error.Error Details:
    Source system
      SAP ECC6.0 SR2
      DB: DB2.9.1.4
      OS: AIX 5.3
    Target system
      SAP ECC6.0 SR2
      DB: DB2.9.1.4
      OS: SUSE 10 64 Bit
    ERROR      2008-11-13 07:41:06
               CJSlibModule::writeError_impl()
    CJS-30023  Process call '/usr/sap/DEV/SYS/exe/run/dipgntab -rwr40 -srctt DDNTT -srctf DDNTF -dsttt DDNTT -dsttf DDNTF -ttonly TT' exits with error code 126. For details see log file(s) dipgntab.log.
    TRACE      [iaxxejsbas.hpp:460]
               EJS_Base::dispatchFunctionCall()
    JS Callback has thrown unknown exception. Rethrowing.
    ERROR      2008-11-13 07:41:06 [iaxxgenimp.cpp:731]
               showDialog()
    FCO-00011  The step adjustNametab with step key |NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_DB6|ind|ind|ind|ind|5|0|adjustNametab was executed with status ERROR .
    TRACE      [iaxxgenimp.cpp:719]
               showDialog()
    <html><head></head><body><p>An error occurred while processing service <b>SAP ERP 2005 Support Release 2 > Additional Software Life-Cycle Tasks > System Copy > IBM DB2 for Linux, UNIX, and Windows > Target System > Central System > Based on AS ABAP and AS Java > Central System Installation</b>. You may now</p><ul> <li>press <I>Retry</I> to repeat the current step.</li> <li>press the <I>View Log</I> button to get more information about the error.</li> <li>stop the task and continue with it later.</li></ul><p>Log files are written to <b>/tmp/sapinst_instdir/ERP/LM/COPY/DB6/SYSTEM/CENTRAL/AS/</b>.</p></body></html>
    TRACE      [iaxxgenimp.cpp:1155]
               showDialog()
    waiting for an answer from gui
    dipgntab.log
    /usr/sap/DEV/SYS/exe/run/dipgntab: /usr/sap/DEV/SYS/exe/run/dipgntab: cannot execute binary file

    Hi,
    1. please check if /usr/sap/DEV/SYS/exe/run/dipgntab exists or not ?
    2. Does it have executable permissions?
    3. Does your user have authorization to execute it?
    4. if you executed dipgntab manually, does it work ?
    Regards,
    Vincent

  • Sap xi SCENARIO source directory working ,but not working target directory

    sap xi SCENARIO source directory working ,but not working target directory..
    plz help me

    Hi,
    Be more specific on the problem you are facing so that the ppl here can help..
    looks like your are trying to file to file scenario and the file is not generating at the target folder ...
    then check the communication logs of the receiver adapter using RWB->CC logs..
    post the error you have received there..
    HTH
    Rajesh

  • Please help - Can not use stored procedure with CTE and temp table in OLEDB source

    Hi,
       I am going to create a simple package. It has OLEDB source , a Derived transformation and a OLEDB Target database.
    Now, for the OLEDB Source, I have a stored procedure with CTE and there are many temp tables inside it. When I give like EXEC <Procedure name> then I am getting the error like ''The metadata  could not be determined because statement with CTE.......uses
    temp table. 
    Please help me how to resolve this ?

    you write to the temp tables that get created at the time the procedure runs I guess
    Instead do it a staged approach, run Execute SQL to populate them, then pull the data using the source.
    You must set retainsameconnection to TRUE to be able to use the temp tables
    Arthur My Blog

  • Universe Connection in Business Objects for SAP BW as Source.

    Hi All,
    I am trying to create a new Universe connection where i took SAP  as a source , I filled all the details that is required for connection like Application server and system number.
    when i click on next it showing a error like this--
    businessobjects115.olapi.browseobject.1
    could not load provider for transport"sap"
    Could anyone please help me.

    Hi
    I have also same issue , if some one soluaiotn for it.
    Regards,
    Piyush

  • SAP HANA CEI Segmentation error

    Hi All,
    in ADT-> Segmentation-> define aliases for SAP HANA DATA source , i am getting following error .
    my HANA schema name is HANADEMO and table name is  ZTAB
    i am specifying the path as HANADEMO/ZTAB and getting following error .
    please guide me to trouble shoot the same.
    error : Alias ZAT_CUST: data source view hanademo/ZTAB does not exist
    Thanks ,
    SWAPNIL GHARAT

    In HANA Studio, is your package named in lower case? Please check.

  • OSB: Cannot acquire data source error while using JCA DBAdapter in OSB

    Hi All,
    I've entered 'Cannot acquire data source' error while using JCA DBAdapter in OSB.
    Error infor are as follows:
    The invocation resulted in an error: Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapter1/RetrievePersonService [ RetrievePersonService_ptt::RetrievePersonServiceSelect(RetrievePersonServiceSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'RetrievePersonServiceSelect' failed due to: Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
    Exception Description: Cannot acquire data source [jdbc/soademoDatabase].
    Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.soademoDatabase'. Resolved 'jdbc'; remaining name 'soademoDatabase'.
    ; nested exception is:
    BINDING.JCA-11622
    Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    JNDI Name for the Database pool: eis/DB/soademoDatabase
    JNDI Name for the Data source: jdbc/soademoDatabase
    I created a basic DBAdapter in JDeveloper, got the xsd file, wsdl file, .jca file and the topLink mapping file imported them into OSB project.
    Then I used the .jca file to generate a business service, and tested, then the error occurs as described above.
    Login info in RetrievePersonService-or-mappings.xml
    <login xsi:type="database-login">
    <platform-class>org.eclipse.persistence.platform.database.oracle.Oracle9Platform</platform-class>
    <user-name></user-name>
    <connection-url></connection-url>
    </login>
    jca file content are as follows:
    <adapter-config name="RetrievePersonService" adapter="Database Adapter" wsdlLocation="RetrievePersonService.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
    <connection-factory location="eis/DB/soademoDatabase" UIConnectionName="Connection1" adapterRef=""/>
    <endpoint-interaction portType="RetrievePersonService_ptt" operation="RetrievePersonServiceSelect">
    <interaction-spec className="oracle.tip.adapter.db.DBReadInteractionSpec">
    <property name="DescriptorName" value="RetrievePersonService.PersonT"/>
    <property name="QueryName" value="RetrievePersonServiceSelect"/>
    <property name="MappingsMetaDataURL" value="RetrievePersonService-or-mappings.xml"/>
    <property name="ReturnSingleResultSet" value="false"/>
    <property name="GetActiveUnitOfWork" value="false"/>
    </interaction-spec>
    </endpoint-interaction>
    </adapter-config>
    RetrievePersonService_db.wsdl are as follows:
    <?xml version="1.0" encoding="UTF-8"?>
    <WL5G3N0:definitions name="RetrievePersonService-concrete" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/" xmlns:WL5G3N1="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N2="http://schemas.xmlsoap.org/wsdl/soap/">
    <WL5G3N0:import location="RetrievePersonService.wsdl" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService"/>
    <WL5G3N0:binding name="RetrievePersonService_ptt-binding" type="WL5G3N1:RetrievePersonService_ptt">
    <WL5G3N2:binding style="document" transport="http://www.bea.com/transport/2007/05/jca"/>
    <WL5G3N0:operation name="RetrievePersonServiceSelect">
    <WL5G3N2:operation soapAction="RetrievePersonServiceSelect"/>
    <WL5G3N0:input>
    <WL5G3N2:body use="literal"/>
    </WL5G3N0:input>
    <WL5G3N0:output>
    <WL5G3N2:body use="literal"/>
    </WL5G3N0:output>
    </WL5G3N0:operation>
    </WL5G3N0:binding>
    <WL5G3N0:service name="RetrievePersonService_ptt-bindingQSService">
    <WL5G3N0:port binding="WL5G3N1:RetrievePersonService_ptt-binding" name="RetrievePersonService_ptt-bindingQSPort">
    <WL5G3N2:address location="jca://eis/DB/soademoDatabase"/>
    </WL5G3N0:port>
    </WL5G3N0:service>
    </WL5G3N0:definitions>
    Any suggestion is appricated .
    Thanks in advance!
    Edited by: user11262117 on Jan 26, 2011 5:28 PM

    Hi Anuj,
    Thanks for your reply!
    I found that the data source is registered on server soa_server1 as follows:
    Binding Name: jdbc.soademoDatabase
    Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
    Hash Code: 80328036
    toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/291])/291
    Binding Name: jdbc.SOADataSource
    Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
    Hash Code: 92966755
    toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/285])/285
    I don't know how to determine which server the DBAdapter is targetted to.
    But I found the following information:
    Under Deoloyment->DBAdapter->Monitoring->Outbound Connection Pools
    Outbound Connection Pool Server State Current Connections Created Connections
    eis/DB/SOADemo AdminServer Running 1 1
    eis/DB/SOADemo soa_server1 Running 1 1
    eis/DB/soademoDatabase AdminServer Running 1 1
    eis/DB/soademoDatabase soa_server1 Running 1 1
    The DbAdapter is related to the following files:
    C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ connectors\ DbAdapter. rar
    C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ DBPlan\ Plan. xml
    I unzipped DbAdapter.rar, opened weblogic-ra.xml and found that there's only one data source is registered:
    <?xml version="1.0"?>
    <weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90">
    <enable-global-access-to-classes>true</enable-global-access-to-classes>
    <outbound-resource-adapter>
    <default-connection-properties>
    <pool-params>
    <initial-capacity>1</initial-capacity>
    <max-capacity>1000</max-capacity>
    </pool-params>
    <properties>
    <property>
    <name>usesNativeSequencing</name>
    <value>true</value>
    </property>
    <property>
    <name>sequencePreallocationSize</name>
    <value>50</value>
    </property>
    <property>
    <name>defaultNChar</name>
    <value>false</value>
    </property>
    <property>
    <name>usesBatchWriting</name>
    <value>true</value>
    </property>
    <property>
    <name>usesSkipLocking</name>
    <value>true</value>
    </property>
    </properties>
              </default-connection-properties>
    <connection-definition-group>
    <connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
    <connection-instance>
    <jndi-name>eis/DB/SOADemo</jndi-name>
              <connection-properties>
                   <properties>
                   <property>
                   <name>xADataSourceName</name>
                   <value>jdbc/SOADataSource</value>
                   </property>
                   <property>
                   <name>dataSourceName</name>
                   <value></value>
                   </property>
                   <property>
                   <name>platformClassName</name>
                   <value>org.eclipse.persistence.platform.database.Oracle10Platform</value>
                   </property>
                   </properties>
              </connection-properties>
    </connection-instance>
    </connection-definition-group>
    </outbound-resource-adapter>
    </weblogic-connector>
    Then I decided to use eis/DB/SOADemo for testing.
    For JDeveloper project, after I deployed to weblogic server, it works fine.
    But for OSB project referencing wsdl, jca and mapping file from JDeveloper project, still got the same error as follows:
    BEA-380001: Invoke JCA outbound service failed with application error, exception:
    com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapterTest/DBReader [ DBReader_ptt::DBReaderSelect(DBReaderSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'DBReaderSelect' failed due to: Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
    Exception Description: Cannot acquire data source [jdbc/SOADataSource].
    Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
    ; nested exception is:
    BINDING.JCA-11622
    Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
    Exception Description: Cannot acquire data source [jdbc/SOADataSource].
    Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
    You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
    It almost drive me crazy!!:-(
    What's the purpose of 'weblogic-ra.xml' under the folder of 'C:\Oracle\Middleware\home_11gR1\Oracle_OSB1\lib\external\adapters\META-INF'?
    ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  • SAP System Message: Syntx error or generation error in a screen

    dear sap basis gurus,
    i am currently having problems signing on to our DEV server. i get this error message:
    <SID>: SAP System Message
    Syntx error or generation error in a screen.
    it won't let me log on.
    there were no changes made on the server (i.e., profile parameters) lately. it was working really fine after our support package level upgrade about 5 months ago.
    have you encountered this problem before? please help me as there we have two imminent go-lives.
    thank you very much in advance.
    best regards,
    albert

    hello nick, ashok,
    thank you very much for your responses.
    i have already resolved this issue by just freeing up some space from our disks. not one of them was full though.
    i hope i would no longer encounter the error message.
    again, thank you.
    best regards,
    albert

  • ODBC Data Source Error

    I was having with Crystal communicating with one of my Access databases that had a list box. In Crystal it would take the list box, add and remove letters. It was suggested that I check with my IT department to see if there are any updates. Well they upgraded me from Crystal XI to Crystal XI R2. Things have gone downhill from there. First I couldnu2019t even open the program and they ended up reinstalling everything again. Now I can open Crystal, but all reports I previously created and new ones I try to create cannot make any connection through ODBC. My IT person and I have tried several things even installing a couple new drivers. My IT department does not provide technical support for software so now Iu2019m on my own to figure this out. If anyone can provide me with any assistance or any suggestions where to check I would greatly appreciate it.
    My problem is any time I try to make an ODBC connection to either create or update a report I go through the steps and get an error at the connection information page and cannot go any further. This error happens with MS Access or MS Excel.  The error is "Login Failed. Details: Cannot obtain error message from server. I have no logins or passwords.

    In the Organizer workspace, do a
    File > Catalog > Recover
    command. That command "cleans up" your Elements catalog and often resolves ODBC data source error messages.

  • Pass a variable value to SQL Command in OLEDB Source

    Hi,
      I have the OLEdb Source where it has SQL Command as Data Access Mode. Below is the sample query that i have in that.
    DECLARE @MonthOffSet int = 24
    DECLARE @PaidDate_SK_Low datetime = dateadd(mm,MONTH(getdate())-@MonthOffSet-1,dateadd(year,datediff(year,0,dateadd(YY,0,getdate())),0))
    DECLARE @PaidDate_SK_High datetime = dateadd(dd,-1,dateadd(MM,@MonthOffSet,@PaidDate_SK_Low))
    followed by select statement which has where clause.
     Instead of hard code the value 24, i am trying to get the value from variable. I know there is a limitation to add the parameters only in where clause. Is there any work around or solution.

    But i need to use the first four lines of code in lot other packages which has different sql statement. But if i make whole query variable then i have a limitation on length 4000 char.
    DECLARE @MonthOffSet int = 24
    DECLARE @PaidDate_SK_Low
    datetime = dateadd(mm,MONTH(getdate())-@MonthOffSet-1,dateadd(year,datediff(year,0,dateadd(YY,0,getdate())),0))
    DECLARE @PaidDate_SK_High
    datetime = dateadd(dd,-1,dateadd(MM,@MonthOffSet,@PaidDate_SK_Low))
    in my select statement in where clause i am using date range between @PaidDate_SK_Low
    datetime  and @PaidDate_SK_High
    datetime 
    Any suggestions

  • Disk image Restore returns "Could not validate source - error 254"

    I had backed up an older G4 with a disk image of the boot disk. I was having severe problems so I reformatted the boot drive and started a restore (using disk utility from startup disk). The restore started fine and ran a while but then "stalled." The "progress" bar stopped and the system just kept "hitting" the Utility DVD install disk non-stop (as shown by disk access light).
    Now when I try again, I immediately get a "Restore Failure - Could not validate source - error 254"
    The disk image being restored is on a hard drive. I copied it to another drive and tried again with the same result.
    This is being done on an old G4 Tower, dual 1 GHz PPC under 10.5.8
    Comments?
    (This won't kill me as all my data files are also on my MBP, I just don't want to have to reinstall all my apps, setups, etc.)

    Yes, for my "real" machine (my Intel MBP) I have images, clones, and Time Machine Backups not to mention my data files written to DVD. I've got at least triplicate backup. This was a old machine I was setting up for a specific purpose. I'm not losing any data but I just didn't want to have to reload apps and such. But guess I have no alternative. Thanks for the tip. I had never used the "scan for restore option" before so I learned something. Usually I just trust my multiple backup method so if one source is bad, no big deal. Thanks baltwo!

Maybe you are looking for

  • Convert Project vs New Project / Import

    Hi, I currently have both PP CC 7.2.2 and 2014 8.0.0 installed on my Win 7 Pro machine, both of which have been running smooth and I personally haven't experienced and issues with 2014 8.0.0 - yet. Over the last several versions of PP since about CS5

  • Call url from ABAP program

    Hi friends, Can we call a web URL from a ABAP program? Is there anyway its possible ? if yes how? Please provide the solution. Thanks & Regards kapil

  • Report by Material

    Hi, I want to see a report on how much amount was booked using a certain material. We are using ECC 5.0. Is there a way to do that? Thanks, N All answers will be rewarded points!

  • Itunes has stopped working?? HELP ME!

    I have been getting the error message "itunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." everytime I try to open itunes. It doesn't open at a

  • Safari says "Please Update Internet Explorer"

    In last two days, everytime I try to connect google.com (and once that I try to connect facebook.com), there pops up a message saying "WARNING! Your internet Explorer is out of date Please Update" though I never installed IE before. When I click OK,