SAP report incompletion document

Dear All,
Is there any standard SAP report for incompleted sales document providing following details -
1. Document-wise line item-wise incompletion log
2. Detials of incompletion log for each line item in the respective sales document
Thanks & Regards
Piyush Ranpura
Edited by: Piyush Ranpura on Nov 19, 2010 12:11 PM

Hi
As said by Balaji check those T codes
V.26 and V.02
Execute V.02 after the display click on the sales order to have item level details
regards
PRashanth
Edited by: Prashanth@SD on Nov 19, 2010 12:34 PM

Similar Messages

Visibility of non-SAP reports and documents in the Portal

Hi All,
I am new to the portal forum and need your direction. We have the need for outside users to view static reports and documents not generated by SAP on the portal. Can anyone point me to documentation on how this can be accomplished? We do not have Knowledge Management installed and my research seems to show that KM is the only way, is there another and how can we do it?
Thanks for your help.
Pam

Pam,
How are your reports served? If they are served up by URL, you can create a URL iview back to the source system. If you need to store them in the portal system then you need KM.
jwise

Standard SAP report for documents

Hi,
Is there any standard SAP transaction code where we can get all sales order and there corresponsing billing documents in case of order related billing?

Dear Christino,
I doubt any standard report would give you like of Sales Orders & corresponding Billing Documents.
You will have to either:
1. Generate a Query (SQ00)
2. Generate a Z-report with help of your ABAPer.
Hope this helps...
Thanks,
Jignesh Mehta

SAP CRM Incomplete Orders Report

Hi,
What is the standard SAP CRM incomplete or open order report in SAP CRM 7.0 ?
Thanks
Andy

I don't think there is any standard report for that. But you can make your own report or view or query in which you display all orders that have system status I1030 (errors).
Regards.

Is there any Standard SAP Report?for displaying Billing block/Status-Order

Hi,
Am a ABAP Developer. I heard that there is SAP Query/ABAP Query/Standard SAP report for the below functionality/requirement. SO, pls. let me know if there is any SAP Query/ABAP Query/Standard SAP report?
"This report is suppose to display Credit and Debit memo documents which are blocked and yet has a status of APRV; the other display is for Return Documents which are blocked and yet has a status RCVD."
thanq

Hi,
Use t-code
V23 - Blocked sales document for billing
VA14L - Sales document blocked for delivery
VFX3 - For blocked billing documents.
Kapil
Edited by: Kapildev Farakte on Jan 8, 2010 4:15 AM

In fbl1n report for document type RE withholding tax amount is not showing

in fbl1n report for document type RE withholding tax amount is not showing
in sap note 363309 determines
Solution
Remove the field which contains the withholding tax information (field BSEG-QSSHB) from your display
variant.
If you want to display the withholding tax information, double-click on the document number and
subsequently choose 'Withholding tax'.
my doubt is we remove the field BSEG-QSSHB in layout how can show the withholding tax amount in FBLIN report
how to remove from the layout
please clarefy
bhayyapu

Hi,
If you want to check amounts of withholding tax for the vendors, you have some options to view it. You can access the WITH_ITEM, LFC1 tables by SE16. You have too the S_P00_07000134 report. This report is developed for the Colombia but I already used for the another country with the ABAP development for this country.
Also you can use table join BSIK and WITH_ITEM by SQVI for the open items and BSAK and WITH_ITEM for cleared items. It is more simple and fast.
JPA

Open an HTML file from a SAP Report

Hi all!
I would like to open an HTML file, that`s in a local directory of my PC, from a SAP Report.
It is an alv list, where I have added a pushbotton. And I would like to code the utility of open a local html file, when someone push it.
Anybody knows if it is possible?
Thx

Here is some sample code.
report zrich_0002.
call method cl_gui_frontend_services=>execute
EXPORTING
    DOCUMENT               = 'C:test.html'
*    APPLICATION            =
*    PARAMETER              =
*    DEFAULT_DIRECTORY      =
*    MAXIMIZED              =
*    MINIMIZED              =
*    SYNCHRONOUS            =
* EXCEPTIONS
*    CNTL_ERROR             = 1
*    ERROR_NO_GUI           = 2
*    BAD_PARAMETER          = 3
*    FILE_NOT_FOUND         = 4
*    PATH_NOT_FOUND         = 5
*    FILE_EXTENSION_UNKNOWN = 6
*    ERROR_EXECUTE_FAILED   = 7
*    others                 = 8
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Please remember to award points accordingly and mark this post as solved when you problem is solved. Thanks.
Also, Welcome to SDN!!
Regards,
Rich Heilman

Requirement Standard SAP Report on Total Purchase Order Value

Dear Friends,
Could u please suggest is there any standard SAP report. Requirement has given belwo.
I required if we have account assignment Category A as one of inputs, we will get the reqd output " Total Purcchase order value."
Note 1) Total Purchase Order Value means - Basic price + taxes + Charges (Freight + Other charges - Discounts etc)
Note 2) My requirement standard SAP report only.
Thanks and regrds,
Vijay Kumar TVN

Hi,
T code : ME80FN
Select :Edit->Dynamic selections>Purchasing document item> Acct. assignment cat.>select A(f4)->execute
select Material no., PO Number in program selections
Hope it shall resolve your query....
regards
rahul

Standard SAP Report - Payments blocked and released

Hi Experts,
We are having a requirement where the payment will be blocked for the invoices generated through Invoicing Plan.
But we need a report " To know the status of payments blocked and released according to the invoicing plan". Do we have any standard SAP report on this requirement?
By
Prabhu

Hi,
Use t.code: FBL1N , enter company code & select document type "KZ" in dynamic selection
and then select & execute for....
1.Open Items in status segment for not paid to vendor
2.Cleared Items in status segment for paid to vendor
Regards,
Biju K

Sap report error

Hai
in outgoing payment field having two remarks table is there one is journa remarks ,another one is manually we enter the remark(reason) , when i will import general ledger report(default report in sap )
only one remarks table is come , (journal remark) but manually enter the remarks does not come what i willl do , how do i solve pls reply soon

Hi.......
When you change the Remark manually in Documents that remark wont display in SAP Reports if that remark is updated one.
But if you are putting remark manually at the time of adding document then this remark will be shown.
So remark always displays from the Journal Entry form and not Marketing Document transaction form.......
Regards,
Rahul

Sap reporting tools

Hi,
Plz any one explain
1. What are the Sap reporting Tools
2. What r the diff between Forms and Reports
plz if possible give some examples
thanks in advance
bye

Hi:
SAP Reporting Tools
ABAP list reports (customized and R/3 delivered)
Report Writer / Report Painter
ABAP queries
InfoSets
Ad-Hoc Query Tool
Crystal Reports (using the Business Objects' Integration Kit for SAP)
SAP Reports means Reading and displaying data or A method of outputting data for evaluatation.
SAP Form can be Document that either an end user interacts with or that is produced by merging a form template with data. or A form can be seen as a semifinished report, which is completed when you select the characteristics and indicators during report definition.
Please let me know if you need more information.
Assign points if useful.
Regards
Sridhar M

SAP report of field status variant, in 4.7

Hello all,
Is there a SAP report that lists a field status variant, its groups, the groups fields, and the entry properties of the fields?
In customization, path /Financial Accounting/Financial Accounting Global Settings/Document/Line Items/Controls/Maintain Field Status Variants - execute
Gets you to the transaction where this is set up. If you have access to this transaction, you can see all of that information, even capture it to a spool or presentation file.
We want to give this information to users who don't have that access.
I am hoping that someone knows of a SAP report with that information, or someone has already created their own report and is willing to share some code.
I started to look at function PREPARE_FIELD_SELECT_STRING, but got lost in the detail. If that is only way to get what I want, well...
Thanks
Bruce

This is my solution. Simple code, once I finished debugging the function module PREPARE_FIELD_SELECT_STRING.
tables: t004f,       " Field status definition groups
        tmodf,       " Groups in Field Selection Bar
        tmodg,       " Name of Groups in Field Selection Bar
        tmodo,       " Items in Field Selection Definitions
        tmodp.       " Name of Items in Field Selection Definitions
data: w_t004f type t004f.
data: i_t004f type table of t004f.
data: begin of gruptab occurs 0,
        ggrup   like tmodo-ggrup,
        ftext   like tmodp-ftext,
        xhell   type c,
      end of gruptab.
data: c500(500)    type c.
data: incoming_string(200).
data: fleng(4)     type n.
data: w_string_position(3) type n.
select-options: s_fstva for w_t004f-bukrs default '0001' obligatory.
selection-screen skip 1.
select-options: s_group for t004f-fstag default 'GT02'.
start-of-selection.
select * from t004f into table i_t004f   "
           where bukrs in s_fstva
             and fstag in s_group.
loop at i_t004f into w_t004f.          " field status groups (FSG)
    skip 1.
    write: / w_t004f-fstag.
    perform get_subgroup_list.
endloop.                                                  " i_t004f
end-of-selection.
form get_subgroup_list .
clear gruptab. refresh gruptab.
incoming_string        = w_t004f-faus1.
incoming_string+90(50) = w_t004f-faus2.
select * from tmodf where fauna = 'SKB1-FAUS1'.
    gruptab-ggrup = tmodf-ggrup.
    select single * from tmodg where spras = sy-langu
                               and   fauna = tmodf-fauna
                               and   ggrup = tmodf-ggrup.
    if sy-subrc = 0.
      gruptab-ftext = tmodg-ftext.
    else.
      gruptab-ftext = text-ngg.
    endif.
    append gruptab.
    skip 1.
    write: /5 gruptab-ftext,
           50 'Suppress',
           60 'Required',
           70 'Optional'.
    perform get_fields.
endselect. " FROM tmodf
endform.
form get_fields .
* ------- Read the item texts
select * from tmodo where fauna = 'SKB1-FAUS1'
                        and ggrup = tmodf-ggrup.
    select single * from tmodp where spras = sy-langu
                               and   fauna = tmodo-fauna
                               and   modif = tmodo-modif.
    write: /10 tmodp-ftext.
* get individual field options
    write tmodp-modif to w_string_position.
    w_string_position = w_string_position - 1.
    case incoming_string+w_string_position(1).
      when '+'.
        write: 60 'X'.             " obligatory
      when '.'.
        write: 70 'X'.             " optional.
      when '-'.
        write: 50 'X'.             " supress
    endcase.
endselect. " FROM tmodp
endform.
Edited by: Bruce Tjosvold on Jun 30, 2011 7:17 PM

Include Movement Type into FBL3N and NA into MB51 (SAP report).

Hi SAP Gurus,
1.Is this possible to Include Movement Type into FBL3N, if You guys know that pls let me, what are the steps require.
2.Enhancement to existing SAP report, t-code:KOB1 to include standard cost, std quantity, actual cost, actual quantity by part details and assembly part number in SE & SR document type
Guys please help on this.

Hai
i thought u require the layout which give report like FBL3n ,not in standard lyout which u insert field.
then go path in clude it required field
Financial accounting /genaral ledger accounting/gl accounts/line items/display line item. where u may go for new field to
insert like by new entries..not only for gl,u may search for ap,ar, also get this type configuration for respective path.
clear

Insert SAP ICONS into from SAP into Word document (OLE)

Hi ,
I want to Insert SAP ICONS into from SAP into Word document (OLE) .
Please let me know how can I do it? I would really appreciate it.
Regards,
Sanjeev

Hello,
Try this out:
(1) Copy program DD_ADD_PICTURE into your own version called ZDD_ADD_PICTURE. Make sure
you select all the checkboxes (including GUI Status and screens).
(2) Paste the modified code at the end of this reply into your ZZ_ADD_PICTURE program.
(3) Run ZZ_ADD_PICTURE for a range of Icons (e.g. enter Icon name ICON_IN* on the selection screen)
(4) When you get the result list, type in ok-code EXPO directly in the ok-code
field (you could also add a button for this function in the GUI status).
(5) Download all the displayed icons as .gif files into a Windows folder
that you have created to hold the icon .gif files (e.g. C:SAPICONS)
(6) Now you can work with the icon files as you would any .gif file. (e.g. In a Word doc, use menu path
Insert -> Picture -> From file.)
Here is the code:
REPORT dd_add_picture.
TYPE-POOLS: sdydo.
DATA: do TYPE REF TO cl_dd_document.
DATA: is_displayed.
TABLES: icont.
DATA: BEGIN OF icontab OCCURS 0.
        INCLUDE STRUCTURE icon.
DATA: END OF icontab.
select-options: s_icon for icontab-name obligatory.
SELECT * FROM icon INTO TABLE icontab WHERE locked NE 'X'
                    AND name in s_icon.
* Event Handler Definition, handling changes of GUI fonts, colors,...
CLASS cl_my_event_handler DEFINITION.
PUBLIC SECTION.
    METHODS:
      use_new_resources FOR EVENT resources_changed OF cl_gui_resources.
ENDCLASS.
DATA: my_handler TYPE REF TO cl_my_event_handler.
CREATE OBJECT my_handler.
* Call Screen
CALL SCREEN 100.
*&      Module STATUS_0100 OUTPUT
MODULE status_0100 OUTPUT.
IF is_displayed IS INITIAL.
    SET PF-STATUS 'BRP'.
    SET HANDLER my_handler->use_new_resources.
* create document
    CREATE OBJECT do.
* fill document
    PERFORM dd_add_icon USING do.
* merge document
    CALL METHOD do->merge_document.
* display document .
    CALL METHOD do->display_document
                       EXPORTING container          = 'HTML'
                       EXCEPTIONS html_display_error = 1.
                                       " do some exception handling ...
    is_displayed = 'X'.
ENDIF.
ENDMODULE.                             " STATUS_0100 OUTPUT
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
    WHEN 'BACK'.                       "Beenden
      LEAVE PROGRAM.
    WHEN 'PRN'.
      CALL METHOD do->print_document
              EXPORTING reuse_control = 'X'.
    WHEN 'PRN_NEW'.
      DATA text TYPE sdydo_text_element.
      CALL METHOD do->initialize_document.
      text = 'Dies Dokument wurde speziell fürs Drucken erstellt!' &
                        ' Druckdatum: '(500).
      CALL METHOD do->add_text EXPORTING
                           text         = text
                           sap_fontsize = cl_dd_area=>large.
      WRITE sy-datum TO text DD/MM/YYYY.
      CALL METHOD do->add_text EXPORTING text = text .
      CALL METHOD do->new_line EXPORTING repeat = 2.
      PERFORM dd_add_icon USING do.
      CALL METHOD do->merge_document.
      CALL METHOD do->print_document.
    WHEN 'EXPO'.
      CALL METHOD do->export_document EXPORTING to_filesystem = 'X'.
ENDCASE.
CLEAR sy-ucomm.
ENDMODULE.                             " USER_COMMAND_0100 INPUT
*&      Form DD_ADD_ICON
*       text
FORM dd_add_icon USING p_do TYPE REF TO cl_dd_document.
DATA ta TYPE REF TO cl_dd_table_element.
DATA col1 TYPE REF TO cl_dd_area.
DATA col2 TYPE REF TO cl_dd_area.
DATA col3 TYPE REF TO cl_dd_area.
DATA text TYPE sdydo_text_element.
* set Heading
text = ' Bilder in Dynamischen Dokumenten'(001).
CALL METHOD p_do->add_text EXPORTING text = text
                                  sap_style = 'heading'.
CALL METHOD p_do->new_line.
CALL METHOD p_do->new_line.
CALL METHOD p_do->add_table EXPORTING with_heading    = 'X'
                                      no_of_columns     = 3
                                      width             = '100%'
                                      IMPORTING table   = ta.
* set columns
text = 'Ikone'(011).
CALL METHOD ta->add_column EXPORTING heading = text
                             IMPORTING column   = col1.
* fill table
LOOP AT icontab.
    SELECT SINGLE * FROM icont WHERE langu = sy-langu
                               AND   id    = icontab-id.
    CALL METHOD col1->add_icon EXPORTING sap_icon = icontab-name
                                         sap_color = 'LIST_GROUP'.
ENDLOOP.
ENDFORM.                               " DD_ADD_ICON
* CLASS cl_my_event_handler IMPLEMENTATION.
CLASS cl_my_event_handler IMPLEMENTATION.
METHOD use_new_resources.
    IF is_displayed EQ 'X'.
* initialize document
      CALL METHOD do->initialize_document.
* fill document
      PERFORM dd_add_icon USING do.
* merge document
      CALL METHOD do->merge_document.
* display document
      CALL METHOD do->display_document
                          EXPORTING reuse_control        = 'X'
                                    reuse_registration   = 'X'.
    ENDIF.
ENDMETHOD.
ENDCLASS.
Regards,
Vasanth

Error message when checking WWI report template document in CG42.

Hi Gurus.
I'm facing troubles to check MSDS report template document after upgrading the version 4.7 to ECC 6.0. When I try to Check the template I receive many msgs warnings like shown below:
For Example One type of template warninfg from report document:
Template Texts: (From the UNDERLINED LINE i am getting the warnings)
<01G1023001RP(C;1)>:<01G1023001RP(P;1)>:
<13BNG034(+0101G1023001RP(C;2-),01G1023001RP(P;2-)>
<11BRG023(D;2-*)>
<01G1023001RP(C;2-)>:<01G1023001RP(P;2-)>:
<11ERG023>
WARNINGS from above template symbols:
Symbol G1023001RP: Range to be overwritten by that of discrete repeating group
Symbol G1023001RP: Range to be overwritten by that of discrete repeating group
*Similar type of other warnings:*
Symbol G1023001SY: Range to be overwritten by that of discrete repeating group
Symbol G1023001SY: Range to be overwritten by that of discrete repeating group
Symbol ZSUPNAM1: Range to be overwritten by that of discrete repeating group
Symbol ZSUPNAM2: Range to be overwritten by that of discrete repeating group
Symbol ZSUPSTR: Range to be overwritten by that of discrete repeating group
Symbol ZSUPCTY: Range to be overwritten by that of discrete repeating group
I realy don't know what is going on. Before in SAP 4.7 version When i check the template document i didnt receive any warnings like i listed above but i am receiving now. For your reference I am using the same WWI report template in ECC 6.0 also.
Can anyone help me?
Thanks in advance.
Edited by: sunil29 on Aug 1, 2011 3:26 PM

See note 920317. That warning won't affect the result based on this example. You are using (2-*) on both the Discrete repeating group and the symbol itself. In your new system, the area you use discrete repeating group overrides the area on the symbol. The note gives some examples.

SAP report incompletion document

Similar Messages

Maybe you are looking for