SAP T-code - What transaction for reprocessing inbound IDocs?

Hello,
From what I know, WE19 is used for reprocessing outbound IDocs...
What is the transaction for reprocessing inbound IDocs?
Thanks.
Moderator message: Please use a meaningful subject for your questions.  I've edited it for you this time
Edited by: Matt on Nov 6, 2008 1:39 PM

Hi,
We19 is used for testing the IDOC.
We can fill the parnter details & idoc segmetns manually and can try to post it.
This is a test tool for idoc processing manually. not specifically outbound or inbound.
Regards
Manasa

Similar Messages

  • How to write processing code for the Inbound IDOC to the R/3 ??

    i m having a file -> XI-->R/3 scenario,
    IDOC is being sent from XI to R/3,
    can u guide to me to write a processing code for the Inbound IDOC to the R/3,
    since i m new to ABAP and ALE technology, can we provide me any blog for doing that.......or guide me....

    Hi Sudeep
    Simple File to Idoc scenarion blog
    /people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
    Also see the blog
    <a href="/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi Steps for Posting IDOC's</a> by Ravikumar.
    Configuration of IDOC adapter
    http://help.sap.com/saphelp_nw04/helpdata/en/96/791c42375d5033e10000000a155106/frameset.htm
    Regards
    Santhosh
    *Reward points if useful*

  • How to block the status mail for an inbound Idoc to a specific user

    Hi,
    I have to stop sending the error status mail to a specific user depenidng on Partner Type. This will trigger when an inbound Idoc contains status error(message type INVOIC &ORDRSP).This user needs other mails which are getting triggered with the same Idoc for the same partner. Basically, the requirement is to block only the status mail for that user. The statndard task for this is TS70008125 and it uses the agent determination rule 30000001 (Idoc Administrator).in WE46, this task is assigned to process code EDIR. I have copied the task to a custom task and changed the agent determination rule. I would like to know how will I configure this task so that this custom task will trigger for the status error, without altering other workflows for the same message type & the partner type. Or is there any other way to block the mail?
    Thanks,
    Santosh

    Hi,
    I have done the required coding to exclude the specific agent from the rule,copied the task and its ready. My question is how do I map this custom task to a particular partner type, for the message type INVOIC in WE20? (The message type used for the inbound Idoc is INVOIC). I checked the Partner profile in WE20. Most of the process code is using function module as the processing type.
    Thanks,
    Santosh

  • Workitem is not generating for an Inbound Idoc

    Hi All,
    The problem I am facing, when inbound idoc is processing in SAP, if there are any errors occurred, it would generate a work item and that will be sent to user Inbox (SBWP) as per the workflow. Here it is not generating a work item for an inbound idoc where is there is an error. So user is not receiving work item mail to inbox, to check about the idoc error. This idoc has been processed through the function module.
    Could you please let us know your input on this issue.

    Hi Hitu,
    The problem could be at multiple places.
    To debug check the workflow which sends the workitem to the user when an error occurs.
    Check if this workflow is getting triggered when the error occurs. If yes, then check the step whre this workflow fails.
    Else, check the event linkage of this workflow and check if the associated event is getting triggered or not. If yes, check if the event linakge is active for the workflow.
    There could be other places as well to diagnose the error.
    Check if these inputs gives you some direction.
    Regards,
    Saumya

  • What is the standard inbound idoc for substation management?

    Hello Experts,
    Can anybody help me to find out the standard inbound idoc for substation management?
    The following field are requied to be  filled in idoc.
    1)Power_Produced(STAGR)
    2) Reduction_Power_Consumed(STAGR)
    3)Ancillary_Power_Consumed (STAGR)
    4)Unit (MEINB)
    5) UOM and Date (BUDAT)
    If possible please tell me the standard BAPI for these fileds.
    Thanks in advance for your help.
    Thanks and Regards,
    Suresh.

    Hi Debo,
    What is your exact requirement?
    Are you trying to find the standard configurations available for a webdynpro application? then, use t-code SE15 and open the application name and use the tree structure to find out the available configurations under WD application.
    sample:
    Regards,
    Rama

  • Process code used for DELFOR inbound idoc

    I have to create one interface in that i have to capture the transfer orders from that i have create the DELFOR idoc which used for posting the scheduling agreements.
    These agreements will pos teh requirement to the forecast tab.
    Please let me know the process code used for this inbound DELFOR idoc.
    Regards,
    Uday

    Hi Uday,
    Firstly: Yes. Delins function module can be used for Delfor. Either case you will make the sytem update the forecast tab of scheduling agreement.
    Secondly: Make sure you have one valid sales scheduling agreement maintained for that sold to, customer-material, ship to partner description.
    Let me know if you have further concerns;
    Regards,
    Syed Nasir

  • Segment E1IDBW1 is missing for the inbound idoc type PAYEXT

    Hello,
    the above segment is missing in the inbound idoc - basic type pexr2002.
    I have checked in TC-we30 and its available there.
    but still the idoc is getting generated without this segment.
    can someone suggest.
    thanks
    Arun

    Hi All,
    I have a similar query to that of Penny. We are able to get the standard IDOC to generate with segment E1IDBW1. It contains the standard fields INPWEEMP, INPWTXT1, INPWTXT2. However, we have a requirement to manipulate the standard contents of these fields. We wanted to use user exit EXIT_SAPLIEDP_002 to do this.
    I have maintained user exit EXIT_SAPLIEDP_002 but when we enter this on creation of the IDOC the segment E1IDBW1 does not seem to be available in table EDIDD_TABLE for manipulation. Can you advise please if (1) you were able to get E1IDBW1 available to edit in exit EXIT_SAPLIEDP_002  and (2) were you able to manipulate the contents of INPWTXT1, INPWTXT2 etc?
    We have done the following steps:
    - BTE 2441 is available on our release
    - house bank has been setup as an In House Cash Center which allows E1IDBW1 to be generated
    - entry has been maintained in table FEDICUS with Message Type = PAYEXT, BasicType = PEXR2002, Extension = Blank, Seg Type = E1IDBW1
    - code maintained in ZXF08U04
    The system enters ZXF08U04 but E1IDBW1 is not available there for manipulation.
    Can you advise what we might be missing please?
    Thanks and regards
    Mike

  • I looking for a transaction for debug the IDOCS

    Hello friends,
    I looking for a transaction that allowed me to debug the IDOC´s when the direction is only 1 (Outbound),  for ex. for IDOC´s has direction 2 (Inbound) I used the WE19 transaction, and to choose the "Inbound Function Module" button and I take the "Call in debug mode" checkbox,
    Can you tell me if exist another program for this?
    Thanks in advance,
    David

    Hi,
    IDocs are processed by a function module, which are mapped against in table EDIFCT. When you process an IDoc with BD87 you can have a breakpoint in the function and it will stop. For outbound processing it depends on which program is sending the IDoc. For transactional data like purchase orders, the IDoc is created via RSNAST00 which in turn calls a function module assigned to the processing code (BD41).
    For your knowledge [reference1|Re: How to debug Idoc; [reference2|Outbound IDoc debug;.
    May it helps you.
    Regards,
    DS.

  • User eixt for modifying inbound idoc (delins) not working

    hi all,
    Inbound IDoc DELINS.DELFOR02 is sent from customer to vendor to create forecast delivery schedule lines (VA32). E1EDP16-WMENG has the delivery quantity and it is mapped to VBEP-WMENG.
    I need modify E1EDP16-WMENG accordingly (based on some business rules) and this change should also be reflected to VBEP_WMENG.
    I tried to modify the idoc_data in user exits: EXIT_SAPLVED4_002, userexit_zuordnen_idocs. During debug, I can see the idoc is modified, but the final forecast delivery is not updated (VA33).
    Anyone can help?
    Thanks!
    Regards
    Hui

    Hi Sandip,
    Inside userexit_zuordnen_idocs, i updated the table idoc_data_1 (I changed the delivery quantities of the schedule lines), but it dosen't work. In Va33, the delivery quantities are not changed.
    Any other input?
    Thanks!
    Regards,
    Hui

  • Sample code and transaction for this requirement

    Developed a SAP Script for the shipping details. Shipping details is a legal document for the forwarding agent who is going to carry the shipment goods from the company to the customer

    Logic is good but try to avoid MKPF Table..
    I guess you can use EKBE table instead of MKPF and MSEG table.
    your code will take while if you move to PRD.
    Other table fields logic is good.
    Thanks
    Seshu

  • User Exit available for basic inbound idoc type MBGMCR01 in SAP R/3

    HI,
    We are looking for the User Exit for BsicIdoc MBGMCR01.
    When we create confirmation in EBP, this idoc gets triggered from EBP to R/3 to create goods receipt material document.
    Regards,
    Nikhil.B

    Hi
    <b>Please go through the following links, for all the required details -> </b>
    GRN IDOC Transfer to ERP  - MBGMCR01 ( 2 IDOCS created)
    Re: GR IDOC Number
    Re: Confirmation screen field to be mapped to backend field
    Re: Delete goods confirmation in SRM3.0
    Re: Not able to change confirmation date
    Confirmation against Backend PO for SRM@ERP2005
    Re: SRM Confirmation # in R/3
    Re: Goods Confirmation not transferred to backend!!
    Hope this will definitely help.
    Regards
    - Atul

  • Pass through scenario in SAP PI with no mapping for File to IDoc and Idoc to file scenarios

    Hi Experts,
    Can i have step by step process in SAP PI for pass through scenario with no mapping in case of file to Idoc and Idoc to file both cases please.
    What objects i can skip.
    My PI system is 7.3 dual stack.
    I have seen below blogs, still its confusing to me.
    When and how to create an scenario in SAP PI without mapping objects.
    Pass Through Scenario with no Mapping in PI 7.1
    Appreciate your help on this.
    Regards,
    Mohan.

    Hi Mohan
    In pass thru interface you don't need to create any ESR objects, only ID objects are required.
    Just Create a Receiver Determination and Receiver Agreement for your scenario (no need for Interface Det. and Sender Agreement).
    Specify the IDOC in the Sender Interface and namespace as urn:sap-com:document:sap:idoc:messages
    Or instead of creating objects manually, Run the wizard with Idoc name/namespace in sender/receiver interface
    Regards
    Osman

  • Performance issues in using RBDAPP01 for reprocessing iDocs with Status 64

    Hi All,
    I am using the Standard ABAP Program 'RBDAPP01' for reprocessing Inbound iDocs with Status 64 (Ready to be posted).
    When this is scheduled as a job in background, I find that it opens multiple sessions and occupies all available dialog sessions.
    This in turn slows down the entire system.
    Also, I find the addition 'Packet Size' on the selection screen for the program.
    Is it related in any way to the number of sessions the program creates?
    Any pointers in resolving this issue will be extremely helpful.
    Thanks in advance.
    Regards,
    Keerthi

    Hi,
    When you mention Parallel Processing, it becomes active only if I choose that particular option on the selection screen right?
    In my case, I haven't chosen parallel processing, but still the overall system performance seems to have fallen very badly.
    Now please correct me if my understanding is wrong.
    If I increase my Packet Size, it should improve the system performance, but will increase my runtime for the selected iDocs.
    But as I have not selected parallel processing in this current situatuon, it should not have any impact here.
    Have I summarized it rightly?
    Thanks in advance.
    Regards,
    Keerthi

  • Partner profile for INBOUND IDOC

    Dear experts,
    Need your help to define partner profile for inbound idoc to R/3 system. There is a third party (Non SAP) based application from which idocs need to be sent to the R/3 system. There is no need to send an outbound idoc from the R/3 system. Can some one please suggest what are the steps to be taken  to b configure the partner profile  in the R/3 system for the inbound idoc?
    Thanks,
    Priyanka

    Hi
    This is not the right location to post this question.
    You got to post this query in Data transfers section of SDN ABAP Development forums
    Now regarding your question,
    You need to create a Logical System with the help of the transaction SALE.
    Assign the created LS to the client with the help of same transaction
    Go to WE20 and create the partner with the same Logical System name
    Now..as you are recieving the Inbound Idoc from external Non-SAP System, you need to maintain the message type in the Inbound Parameters by clicking on ADD Icon over there.
    Before doing the above step, you got to create the connection between SAP and Non-SAP System.
    Use transaction SM59 to do this. Type of connection would be R/3 I guess
    Thanks
    Hope it helps.

  • Ergent help about inbound IDoc for Goods Receipts

    Dear friends
    We have an ergent issue needing your help.
    It is about DEVRY03.
    Senarios is as following:
    When we create a delivery by using VL31n, system try the IDoc and transfer to XI.
    This is ok.After external warehouse system processes the IDoc,a message is sent back to SAP to post the goods receipts for the delivery.
    Inbound IDoc type is DEVRY03. Is it right?
    Which function module or which process ok is used for this senario?
    Can anyone suggest how to do it?
    Minghan

    Hi !
    Here comes some information for the INBOUND idocs....
    There is a IDOC for transmitting goods movements from a legacy system.
    It's message-type is: WMMBXY
    IDOC-Type is: WMMBID02 (See we60 for it's pretty good docu....)
    Prcoess-Code is :WMMB
    The function that processes the data is: L_IDOC_INPUT_WMMBXY
    Hope that helped a bit (for inbound)....
    Regards
    Rainer
    Some points would be nice if that helped.

Maybe you are looking for