SAP to enhance BICS? Will BEx qry data be available before runtime?

We are prototyping using BICS to connect BEx query with Xcelsius.
Does anyone know if SAP has any plans to allow for BEx query data to be shown in Xcelsius during the modeling stage?
As of now it seems the only option is to publish >> Launch. Then you can see how the dashboard design reacts to the data returned by the query. This is proving very tedious and feels like we are designing in the dark.
Surely there is a better way, and if not, is one in the works?
This is impacting our approach and we might opt to build dashboard in crystal or using QaaWs - although BICS is preference.
Thanks,
Matt

Check "Design Time" section in http://wiki.sdn.sap.com/wiki/display/BOBJ/FAQaboutXcelsiusandSAPNetWeaverBI+Connection
And then you can post a comment on this Wiki for SAP Xcelsius Product Group / RIG member to comment on it.
Furthermore, you can place this as an product enhancement request at https://ideas.sap.com
More the votes an idea gets, better chances it will be included in the product.
Hope this helps a little.
Thanks

Similar Messages

Is there any Data Mapping document Between S&OP ( model that uses supply planning operator ) and SAP ECC that I will help the client in Data Mapping activity.

Hello All,
Is there any Data Mapping document Between S&OP ( model that uses supply planning operator ) and SAP ECC that I will help in Data Mapping activity.
Thanks,
Mownesh

There are standard templates in HCI data sources.
e.g. 1) Customer Master data template is SOP_MD_CustomerMaster for extracting master data from SAP ECC and load it to S&OP
KNVP is the table for customer in ECC from that you can select the fields as required
KUNNR for customer Number
ADRNR for Address
List of a few commonly used table names of ECC:
Product Related:
MARA – Material Master (MATNR)
MARC – Material Master with Plant Data (MATNR, WERKS)
MARD – Material Master with Storage Location Data (MATNR, LGORT, WERKS)
MAKT – Material Master Material Descriptions (MATNR, MATKL)
MBEW – Material Valuation Data (MATNR, BWTAR)
MVKE – Material Master : Sales related Data
MDKP, MDTB – MRP related Data( Header, Item)
MCHA, MCHB – Material Batches (Header, Item) (MATNR, WERKS, LGORT, CHARG)
Vendor/Supplier related:
LFA1 – vendor data (LIFNR)
LFB1 -- Company Code Segment : Vendor Data(LIFNR, BUKRS)
LFC1 -- FI Related Vendor Data (LIFNR, BELNR)
LFM1 – Pur. Orgn. Related Vendor Data (LIFNR, EKORG)
PReq/PO, BOM Related:
EBAN – Pur. Req. Data( BANFN, BNFPO, BADAT, MATNR)
EINA – Purchase Info. Record(General Data)(INFNR, MATNR, LIFNR)
EINE – Purchase Info. Record (pur. Orgn. Data) (INFNR, EKORG)
ELBK, ELBN, ELBP – Vendor Evaluation Related Data
EKKO – PO Data (Header) (EBELN, BSTYP, BSART)
EKPO – PO Data (Item) (EBELN, EBELP, MATNR)
Pur. Req., RFQ and PO are differentiated by Doc Type (BSTYP) in EKKO table.
For RFQ it is ‘A’ and for PO it is ‘F’
MKPF – GRN Data (Header) (EBELN, BLDAT, BUDAT, XBLNR, BKTXT)
MSEG – GRN Data(Item) MBLNR, BWART, LIFNR, MATNR, EBELN)
Apart from this there are lot of tables which begin with ‘M’ & ‘E’, but we
use the following very often.
EQUK – Quota (Header)(QUNUM, MATNR)
EQUP – Quota (Item) (QUNUM, QUPOS, LIFNR)
EKBE – PO History Data (EBELN, EBELP, BELNR, BLDAT, MATNR, VGABE)
EKBZ – PO History with Delivery Costs(EBELN, BELNR, LIFNR, XBLNR)
EKET – Schedule lines data of a PO(EBELN, EINDT, SLFDT)
EKES – Vendor Confirmations Data (EBELN, EBTYP, EINDT, XBLNR)
T163F – Confirmation Texts (EBTYP, EBTXT)
T156 – Movement Types (BWARE)
T024 – Purchasing Groups
T024E – Purchase Organizations
T163 – Item Category’s in Purchasing Documents(PSTYP)
T149D – Valuation Types
T134 – Material Types
FVLK – Delivery Types
STKO, STPO – BOM(Bill Of Material) related Data (Header & Item)
STPU, STPN, STST, STZU – BOM Related Tables
RKPF, RBKP, RSEG (Header & Item) – MM – FI Related Data
KONO, KONH – Pricing data
T006 – Basic Unit Of Measurements
Customer/Sales Order Related:
VBAK : Sales Document(Header Data) (VBELN)
VBAP : Sales Document(Item Data) (VBELN, POSNR, MATNR, ARKTX, CHARG)
Enquiry, Quotation, Sales Order are differentiated based on Doc.
Type(VBTYP Field) in VBAK, VBAP Tables for Enquiry VBTYP = A, for Quotation ‘B’ & for Order it is ‘C’.)
LIKP : Delivery Table(Header Data) (VBELN, LFART, KUNNR, WADAT, INCOL)
LIPS : Delivery Table(Item Data)(VBELN, POSNR, WERKS, LGORT, MATNR, VGBEL)
(LIPS – VBGELN = VBAK- VBELN, LIPS-VGPOS = VBAP-POSNR)
VTTK : Shipment Table(Header Data) (TKNUM)
VTTP : Shipment Table (Item Data)(TKNUM, TPNUM, VBELN)
(VTTP – VBELN = LIKP – VBELN)
VBRK : Billing Table(Header Data) (VBELN, FKART, BELNF)
VBRP : Billing Table(Item Data) (VBELN, POSNR, FKIMG, NEWR, VGBEL, VGPOS)
(VERP – AUBEL = VBAK- VBELN, VBRP – VBEL = LIKP – VBELN)
Apart from these tables there are lot of other tables which starts with ‘V’, but we use the
following tables frequently.
VBUK: All Sales Documents status & Admn. Data(Header) (VBELN, VBTYP)
VBTYP = ‘C’ (Sales Order) VBTYP = ‘L’(Delivery) VBTYP = ‘M’(Invoice)
VBUP: Sales Documents status & Admin. Data(Item) (VBELN, POSNR)
VBEP : Sales Document Schedule Lines Data (VBELN, POSNR, EDATU, WMENG)
VBKD: To get sales related Business data like Payment terms etc.(VBELN, ZTERM)
VBFA: Sales Document flow data(VBELV, VBELN, POSNV, VBTYP)
VBPA: Partner functions Data(VBELN, PARVW, KUNNR, LIFNR)
TVLKT: Delivery Type: Texts(LFART, VTEXT)
KNA1, KNB1, KNC1 : Customer Master Data and Other Partner’s Data(KUNNR,
NAME1,LAND1)
KNVK: Customer Master Contact Person(PARNR, KUNNR)
KNVV: Customer Master Sales Data.
LFA1, LFB1, LFC1: Vendor Master Data(To get Transporter data)(LIFNR, NAME1, ORT01)
MARA, MARC, MARD : Material Master Data(Basic, Plant, St. Location Views)
TVKO: Sales Organizations(VKORG)
TVKOV: Distribution Channels(VTWEG)
TVTA: Divisions(SPART)
TVKBZ: Sales Office(VKBUR)
TVBVK: Sales Group(VKGRP)
T077D: Customer Account Group(KTOKD)
T001W: Plants(WERKS)
T001L: Storage Locations(LGORT)
TWLAD: To get address of Storage Location and Plant(LGORT, ADRNR)
TVAU: Sales Document (Order) Types
KONV: Condition Types (pricing) (KNUMV, KSCHL, KWETR)
T685T: Condition Types Texts.
ADRC: To get Addresses of Partners
VBBE, VBBS: Sales Requirements Data
VBKA: Sales Activities Data
VBPV: Sales Document Product Proposal
Based on the functionality you can search ECC table names and fields
Hope this information is helpful for you.
Thanks and Regards,
Anjali

How we will pull the data from Sap-Bi to sap-Bpc

Dear Experts,
Thanks for watching this thread.The whole data is available in SAP-BI.
My system environment is SAP-BPC MS7.5.
Now i want to load the data from Sap-Bi to Sap-Bpc ms.For that we need any Interfaces.
How we will pull the data from SAP-BI to BPC-MS for Master data and Transaction Data.
could you please provide me step by step guide.
Please guide me what should i do.
Regards,
Srinivasan.
Edited by: srinivasan.singari on Jul 22, 2011 8:20 AM

Tough Ask..
Because i have done dashboarding thru scritping (Dyanamic fashion tough) ..It is very good ..But when, coming to the one you asked i have the idea how it works but cannot really tell you wich would be better.
Each Route has its own limitations.That really depends on what exaclty your client is looking after..
So if you new to xcelsius and eager to learn ..I suggest you to give a go at all those..May be you can let me know wich is the best one..
1. QAWS,
2. Bex Query --> Crystal Reports --> Live office --> DashBoard.
3. Bex Query --> WebI --> Live Office --> Dashboard..
4. Webservices consuming BI Query,
5. Xcelsius SAP Netwever Connector.
But i suggest as of now use Xcelsius SAP netweaver Connnection...

How will be outbound data structure in sap xi after executing the stored pr

Hi All
can any one please tell me how will be outbound data structure in sap xi after executing the stored procedure by sender JDBC adapter?
Thanks in advance
regards
Rams

Hi..
My stored procedure is select and it will be OUTBOUND in PI.
is it will be same as following
<resultset>
<row>
<column-name1>column-value</ column-name1>
<column-name2></column-name2>
<column-name3>column-value</ column-name3>
<column-name4></column-name4>
</row>
<row>
<column-name1>column-value</ column-name1>
<column-name2></ column-name2>
</row>
</resultset>
Regards
Rams
Edited by: Rameshkumar Varanganti on Oct 15, 2008 12:04 PM

How 2 call BAPI & pass table name so that it will insert table data 2 SAP

Hi guys,
Has anyone tried calling BAPI from BODS; Please share screen shots and details. I want to call BAPI fron BODS which will take table name as a parameter and insert that table data to SAP.

HI,
in case you mean BusinessObjects Data Services with BODS then I would suggest you post your question into the EIM area of the SDN forums.
Ingo

Integrating SuccessFactors PMS solution With SAP HCM without saving any employee master data in SF

Hi Friends,
We’re implementing SuccessFactors’s Performance Management Solution only at one of the client location in Saudi Arabia and trying to integrate with the On-Premise SAP HCM and Push the employee data to SF.
However, due to security concerns customer doesn’t want to store any data on SucessFactors cloud solution to run the PMS cycle.
During the purchase of license for SuccessFactors SAP has demonstrated client that, in SF a unique Id will be created for each employee, which will not be the actual UserID(PERNR)from SAP, and with this unique ID actual employee data will be tagged/linked in SF which will fetch the data from SAP On-Premise system to run the PMS cycle. Once the user logins in SF, based on the unique ID data will fetch from SAP On-Premise system to SF on a real time basis and when the user logged out from the SF system, data should be cleared/deleted and nothing will be saved or stored in SF with respect to employee Master Data.
I understand SAP has provided the standard add-on for the Employee Data Scenario between SuccessFactors and SAP HCM, which could have been leveraged here for integration using PI, however with the above limitation this solution is absolutely out of scope.
Please advice, is there any solution where with PI if we can achieve the above requirement of client.
Thanks,
Farhan

Hi Friends,
We’re implementing SuccessFactors’s Performance Management Solution only at one of the client location in Saudi Arabia and trying to integrate with the On-Premise SAP HCM and Push the employee data to SF.
However, due to security concerns customer doesn’t want to store any data on SucessFactors cloud solution to run the PMS cycle.
During the purchase of license for SuccessFactors SAP has demonstrated client that, in SF a unique Id will be created for each employee, which will not be the actual UserID(PERNR)from SAP, and with this unique ID actual employee data will be tagged/linked in SF which will fetch the data from SAP On-Premise system to run the PMS cycle. Once the user logins in SF, based on the unique ID data will fetch from SAP On-Premise system to SF on a real time basis and when the user logged out from the SF system, data should be cleared/deleted and nothing will be saved or stored in SF with respect to employee Master Data.
I understand SAP has provided the standard add-on for the Employee Data Scenario between SuccessFactors and SAP HCM, which could have been leveraged here for integration using PI, however with the above limitation this solution is absolutely out of scope.
Please advice, is there any solution where with PI if we can achieve the above requirement of client.
Thanks,
Farhan

How to parse BEX Query data to Flex interface via XML

Hi,
How can we pass the Bex Query data in XML tabular format so it can be consumed by a Flex interface?
And communicate back and forth.
Regards
Vivek

Hi,
May be this link is helpful to you,
http://help.sap.com/saphelpnw04/helpdata/en/d9/ed8c3c59021315e10000000a114084/frameset.htm_
All the Best,
Madhu....

SAP standards for retriving the Material Master Data

Can someone provide me list of all SAP standards for retriving the Material Master Data with respect to views.
Standard Reports
Function Modules
RFC's
BAPI's.
T.codes
Sample code's
useful answers will surely be awarded.
Regards
Vinayak

Hi,
These are the standard BAPI's for Material master.
BAPI_MATERIAL_DELETE Flag Material for Deletion
BAPI_MATERIAL_DISPLAY Display Material
BAPI_MATERIAL_EDIT Change Material
BAPI_RETAILMATERIAL_CREATE Create Material
BAPI_RETAILMATERIAL_DELETE Discontinue Material
BAPI_STANDARDMATERIAL_CREATE Create/Extend Material
BAPI_MATERIAL_SAVEREPLICA BAPI for Mass Maintenance of Material Data
BAPI_MATERIAL_SAVEDATA Create and Change Material Master Data
BAPI_MATERIAL_EXISTENCECHECK Check Existence of Material
BAPI_MATERIAL_GETBATCHCERT Create Quality Certificate for Batch in Portable Document Format (PDF)
BAPI_MATERIAL_GETBATCHES Create Batch List for a Material
BAPI_MATERIAL_GETCHARMERCHHIER Supply Characteristics of Retail Material for Material Group Hierarchy
BAPI_MATERIAL_GETINTNUMBER Assign New Internal Numbers for a Material Type
BAPI_MATERIAL_GETINTNUMBERRET Assign New Internal Numbers for a Material Type for Retail Materials
BAPI_MATERIAL_GETLIST Supply List of Materials for Search Criteria Transferred
Thanks.,

Publishing BEx Analyzer data in Portal

Hi,
Does anyone have experience with publishing BEx Analyzer data in Portal?
I need an overview of practical steps to achieve the same.
Best Regards,
Kumar

Hi Deepu,
All the parameters in the SAP_BW system is correct and i have tested the ITS, WebAS and Connector tests also and everything is green. In the BI diagnostic tool everything was green however in the RSPOR_SETUP the Maintain User Assignment was getting failed, so i removed the UME Master System (Reference system) from the Portal as i'm using the SAP Logon Tickets both ways. So there is no need for the reference system. After that RSPOR_SETUP is okay and in the BI Diagnostic tool one is red (UME Master system).
One thing i have noticed in the RSPOR_SETUP now that it tells me in the second step:-
com.sap.ip.bi Java classes with different versions.
Different ABAP and Java Support packages
ABAP support package 12
Java Support package 11
Vaib
Any clue??
Vaib

Service Desk Enhancement with Forms & Survey - no data evaluation possible

Hello,
I implemented an additional form in the service desk (using the survey functionality)
See details here: http://www.solutionmanagerexpert.com/article_printable.cfm?id=5621
Creation was fine, I am able to see the additional form as extra tab in Service Desk Support Messages (transaction type SLFN).
But evaluting the data does not work.
According to the survey suite, no data is available - but I answered to the survey/provided input to the form.
I saved the values, and looking into the appropriate tables (mentioned here: CRM Survey Evaluation Data Storage) give the impression that answers are there.
But I cannot evaluate them...
Does anybody have experience with this kind of service desk enhancement and knows how to get the data for evaluation?
Regards,
Jan

Hi Shilpi,
Could you please share how did you achieve this..
Regards.,
Franklin.

Performance problems with SAP GUI 7.10 and BEx 3.5 Patch 400?

Hi everybody,
we installed SAP GUI 7.10 and BEx 3.5 Patch 400 and detected hugh performance problems with this version in comparison to the SAP GUI 6.40 and BEx 3.5 or BEx 7.0 Patch 800.
Does anybody detect the same problems?
Best regards,
Ulli

Most important question when you are talking about performance-issues:
which OC are you working on and which excel version?
ciao
Joke

Some calendars in iCal appear corrupted but OK on iPhone. If I sync will the calendar data on the phone restore info on the desktop iCal? any other ideas for how to sort this please?

Some calendars in iCal appear corrupted (ie have red exclamation mark by them) but are still OK on iPhone. If I sync, will the calendar data on the phone restore info on the desktop iCal or will I lose that as well? Or could I back up the calendars on my iPhone somewhere and then import them into iCal? any other ideas for how to sort this please? it's driving me mad. thanks.

I don't think there will be a solution to this. Exchange 2003 just isn't supported.

My upgrade to iphone software seemed to work but restore failed (1602)- now phone no longer recognised by itunes and itunes only offers restore to factory settings and warns that this will remove all data- also phone is in restore mode- unusable

so I did the itunes upgrade to 10.5.1 and then teh iphone 4 needed to b e upgraded to new ios5.1 - seemed to go all the way through, and the final restore seemed to fail. Now the phone is no longer recognised as personalised, just as iphone. Also i cannot restore from backup, only restore factory settings and i am warned that I will lose all data. Can I force a restore from back up? can I guaruntee that I can keep data from backups??

Same with me. Anyone have an answer??

What are all the Date pickers available in SAP Netweaver?

I am using Java based SAP Netweaver. I want to enter DATE OF BIRTH in a WebDynPro page. Default date picker shows current month only (refer attachment). Picking date with option to change Year, Month is required. Please help in this regard.
With Thanks,
Arun
Message was edited by: Andy Silvey

Hi Arun,
It can also be access issue.
Check with the security ream if you have correct roles assigned or not.
Regards,
Ravi

I'm moving an internal hard drive from an old computer to a new computer. How do I transfer the catalog data to my new computer so the Organizer of Photoshop Elements 6 will find the data on the hard that has been moved to the new computer?

I'm moving an internal hard drive from an old computer to a new computer. (My new compute runs Windows 8.1) How do I transfer the catalog data to my new computer so the Organizer of Photoshop Elements 6 will find the data on the hard that has been moved to the new computer? Is this possible or do I have to use the procedure of copying the catalog along with the photos to a back up hard drive and then restore them on the new computer?

The 'normal' procedure is to do a PSE organizer backup (not a copy or a backup from external tools) to an external drive, then a restore to the new location.
The advantage is that you have a backup of both catalog and media files and you don't have all disconnected files, which would happen with external backup tools. Also, if you restore with a more recent elements version, the catalog will be automatically updated to the new format.
The drawback in your situation is that you'll have either to overwrite all your files or restore to a custom location, creating a duplicate photo library (which supposes you have enough free space).
It would be possible to simply use the organizer in the old PC to move the catalog to a new 'custom' folder just under your C: root drive. The catalog would be accessible once the drive will be installed in the new PC. Then you would have all files 'disconnected' due to the fact that all your media files are now on a drive with a different letter. Reconnecting a whole library is a hard job with PSE6, less so with PSE11/PSE12.
If the idea of fiddling with the sqlite database with external sqlite manager tools is ok for you, I can describe the process more in detail. You only copy your catalog folder (as suggested above) to another location. Instead of trying the 'reconnection' way, you install the sqlite utility on the new computer. When the old drive is installed in the new computer, you simply edit a given record in the catalog database, catalog.psedb, and start the organizer with your copied catalog by simply double clicking the 'catalog.psedb' file.
Even if the last solution is much, much quicker, I would still create a new PSE backup : you have never too much safety .

SAP to enhance BICS? Will BEx qry data be available before runtime?

Similar Messages

Maybe you are looking for