SAP Web services

I am trying to use XCelsius 2008 to connect to SAP Webservices using Webservice Connector.
I provided the WSDL URL and tried to Import. But got an error Unable to load URL.
I am very new to Xcelsius and it seems like the SAP web service basic authentication is failing. Is there any way to hard code the username and password so that it will work?
Or am i missing something important here? Any help would be appreciated.
My email id is [email protected]
Thanks,
Anil.

Hello
SAP Webservice refers to the develop of a WebService in Netweaver you can use ABAP or Java to do it.
This link will be helpful
[SAP Web Services - Definition and Tutorials/Weblogs|SAP Web Services - Definition and Tutorials/Weblogs]

Similar Messages

Invoking a SAP web service from Dreamweaver MX

I am trying to invoke a SAP web service from ColdFusion and it looks like ColdFusion does not even recognize the rfc generated wsdl file as a wsld file. I have tried other wsdl url's outside my company and they work...so I know that web services at least work in ColdFusion. Can anyone advise on this topic?
Thanks!

Paula,
I suppose you're using CFINVOKE (http://www.activsoftware.com/code_samples/code.cfm/CodeID/44/ColdFusion/Invoking_SOAP_Web_Services_with_ColdFusion_MX_CFINVOKE_Tag) or are you using a third party tool like CFX_SOAP (http://www.activsoftware.com/products/productdetail.cfm/id/1015)?
Are you working with WebAS 6.4 or 6.2?
It works with web services created with WebAS 6.4, but you should generate proxy classes. Check Thomas' weblog (second part of it)->https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1012. [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
The WSDL generated by this method is more standard than the one generated when you just Remote enable an FM and look at the webservice browser.
Th core of CF MX is Java and that engine is rather strict in standards.
Eddy

How to remove user authentication for SAP Web Service?

Hi there,
I am using SAP Web Services in my flex application. Every time wsdl url is called, the username\password window pops up. I want to remove this.
I searched in the forum and based on the discussions, I tried giving the user name password under Web Service Administration using SOAMANAGER, by selecting No Authentication option. But this did not work. I still get that pop up.
I also tried giving the credentials in SICF, under Logon Data tab of the service. This too failed. I kept getting the pop up.
Can someone pls let me know how can I remove this? If username password in mandatory to be passed, I can create a temporary username which will be used to access all of my webservices and use it. But I want to remove this authentication part when I am using the flex application ang calling the web service url from within it.
Appreciate your help.....
-Deepak

Hi,
It is a little bit tricky, because the interface has changed several times in different releases. I know that it is possible without authentification.
I remember that i defined somewhere the default client, the username and password in the ERP system to use by this web service.
Maybe it helps if you try the old transactions WSADMIN, WSCONFIG or WSADMIN2 ?
Sorry that I cannot help you more. I hope it helps.
Best regards,
Joern

Calling SAP Web Service from BPEL

Hi
I am trying to call a SAP Web Service friom BPEL using the SAP WSDL.It requires a basic authentication (Username/Password) which i am providing as partnerlink properties in bpel.xml.
While testing the BPEL Process from the console, it is giving me an error
"<summary>exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 401 Unauthorized</summary>"
But when i am testing it from SOAP UI tool it is giving me the desired response.
Does anyone has any idea why it is failing from BPEL?Is there any configuration which i am missing?
Regards
Ayush

HI Ayush / Suryaveer..
I am stuck at the same situation, trying to invoke a secured SAP webservice. The invoke fails with a security previlege exception.
Am using the basicHeaders property to propagate the credentials to the SAP system.
Can you please suggest on the same.
credential propagation in bpel.xml :
<property name="basicHeaders">propagate</property>
<property name="basicUsername">ABC</property>
<property name="basicPassword">DEF</property>

Consuming a sap web service via jde 4.5.7 (ecc 6.0)

Hi all,
I have a question here, if u could help me, i have to call a sap webeservice via jde , but before i test a jde example by calling a public web service which is not a sap web service , i used to give url as:
connThread.get("http://www.webservicex.net/globalweather.asmx/GetCitiesByCountry?CountryName="Morocco;deviceside=true";
i was not obliged to set the apn parameters and it does work
here as it's mentioned , there is the access point, getcities ... the method name and the parameter name and the parameter value
"Morocco", but i m asking how did we precise the methods of an rfc sap, and the name parmeter and his value.
have u any idea to help me understand how we call sap rfc, method name, parmaeter name, cz i m a newbie to sap and bb.
but now when i try to call an rfc sap , i give the link
connThread.get("http://hca-ecc.hca.group:8000/sap/bc/srt/wsdl/sdef_Z_WS/wsdl11/ws_policy/document?sap-client=800;deviceside=true;apn=hca-ecc.hca.group;tunnelauthusername=forma02;tunnelauthpassword=hcaforma" );
but it's always giving me transmission failed without any error that may help me when debugger run.
Thakx in advance.

Hello Merry,
Have you tried searching 'blackberry' in SDN. I found following and many more links. It gives me impression that you may have to use MDS and also may be SAP Webdynpro technology for UI rendering.
blackberry integration with Mobile Infraestructure
There seems to be special site from blackberry for SAP integration (free registration).
https://www.blackberry.com/CorpDevZone/download/SAP/sap.shtml
Re: Steps to show data on actual Blackberry :) Urgent please....
Hope this will give you some headway in resolving your issues.
Regards,
Vandana.

How to publish a SAP Web Service in SAP XI/PI 7.0

Hi,
First I've to say that I'n new in this deals with SAP Web Services and SAP XI/PI.
I've created a Web Service with TX SE80 using a standard BAPI.
I've created the Client Proxy with TX SE80.
I've created a Logical Port wiht TX LPCONFIG.
I've tried this is SOAMANAGER but I have this error...
"SRT Framework exception: Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL"
I would like to publish this service in my SAP XI/PI 7.0
How can I solve the error in SOAMANAGER?
How can I publish de SAP WS that I've created in SAP XI/PI?
Thanks a lot.
Waiting for your news.
Fernando.

Hi Dimitri,
I had the same problem:
"SRT Framework exception: Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL"
And by following Nags hints I got solution:
1, On the system where is your service provider, run transaction SICF
2, Execute this transaction
3, Go to node: default_host/sap/bc/srt/wsil
4, Right click on "wsil" -> choose "Test service" - web browser should open with XML definition of service
5, Find your service provider. In my case it looks like this:
<service>
<name>ZTEST_WS</name>
u2212
<wsdlNamespace>
urn:sap-com:document:sap:soap:functions:mc-style/service
</wsdlNamespace>
<wsdlName>service</wsdlName>
u2212
<wsdl>
http://xxx.yyy.com:8000/sap/bc/srt/wsdl/srvc_DF838C999AA282F18829001CC4D74176/wsdl11/service/ws_policy/document?sap-client=800
</wsdl>
</service>
5, Look for WSDL link -> in my case:
http://xxx.yyy.com:8000/sap/bc/srt/wsdl/srvc_DF838C999AA282F18829001CC4D74176/wsdl11/service/ws_policy/document?sap-client=800
I dont know why, but this link is different like WSDL link in service definition which I can see in SE80:
http://xxx.yyy.com:8000/sap/bc/srt/wsdl/sdef_ZTEST_WS/wsdl11/ws_policy/document?sap-client=800
6, Use this link (from "wsil") instead of link from SE80 in SOAMANAGER to create logical port
7, Yours logicall port should be created without errors.
My question - have anybody idea, why this links are different and why only that second one works?
Peter

Consuming SAP web services with tables

I'm doing kind of feasibility study on consuming SAP web
services from CF.
So far so good, but I'm stuck dealing with tables
(import/export parameters in SAP world).
I know how to receive a table object from SAP functions:
* With Apache Axis v1.2: pass an empty CF structure as a
parameter
* With Apache Axis v1.4: pass an empty CF array as a
parameter
Then the parameter is filled with data (replaced with Java
object) and we can just parse the object accordingly.
My question here is whether or not we can pass a *table with
actual records*.
For example, I want to pass a table with multiple records to
update DB records under SAP.
I tried passing (1) CF array of structure and (2) Java
ArrayList with no chance.
The web service call itself completes without errors (no
method signature error), but the SAP function seems to see the
parameter as an empty table.
Anyone has been successful with this case?
Any suggestion would be much appreciated.

Thanks Dan,
Unfortunately CF query object didn't work either.
Now I'm looking at the code generated by Flex Builder to see
how the classes are like ;-)
It's just an ArrayCollection of simple value objects
(representing a row).
So CF array of structure or Java ArrayList looks a reasonable
approach though they don't at all.

SAP Web services performance tuning in terms of concurrent users?

Hello,
we in our organisation are planning to build a web portal which can connect to our sap environment and perform various tasks.
Hence to find out the performance capabilities we exposed some web services from SAP end and did a load test on the same.
The test results were not promising, with only 25 concurrent users the response time was as high as 12 seconds.
Now we need to fine tune the SAP web service module to get the max performance.
Can anybody point us in the right direction?

One of the function module code is as follows
FUNCTION ZHRPULSE_CREATECONTACTS3.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(EMPL_CONTACT_DETAILSIN) TYPE ZHR_CONTACT_DETAILS
*" EXPORTING
*"     VALUE(EMPL_CONTACT_DETAILSOUT) TYPE ZHR_CONTACT_DETAILS
*"     VALUE(STATUS) TYPE ZHR_STATUS
*" TABLES
*"      SUBTYPE_TABLE STRUCTURE ZHR_CONTACT
DATA: tempRet type BAPIRETURN1,
      oref   TYPE REF TO cx_root.
DATA: E_IT0001 type P0001.
CALL FUNCTION 'HREIC_READ_INFOTYPE_0001'
EXPORTING
    I_PERNR         = EMPL_CONTACT_DETAILSIN-EMPLOYEE_ID
    I_DATE          = sy-datum
IMPORTING
    E_RETURN        = tempRet
    E_IT0001        = E_IT0001
EXCEPTIONS
   NOT_FOUND       = 1
   OTHERS          = 2.
IF SY-SUBRC <> 0.
Status-status = 'Failure'.
status-information = 'ID Not Found in Master Data.'.
exit.
ENDIF.
EMPL_CONTACT_DETAILSOUT-EMPLOYEE_ID = E_IT0001-PERNR.
EMPL_CONTACT_DETAILSOUT-EMPLOYEE_NAME = E_IT0001-ENAME.
SELECT single Btext from t001p into EMPL_CONTACT_DETAILSOUT-location where btrtl = E_IT0001-btrtl.
CALL FUNCTION 'HR_EMPLOYEE_ENQUEUE'
    EXPORTING
      NUMBER             = EMPL_CONTACT_DETAILSIN-Employee_ID.
IF sy-subrc NE 0.
    Status-status = 'Failure'.
status-information = 'NOT able to get a lock on the Employee ID'.
    EXIT.
ENDIF.
CALL FUNCTION 'BAPI_ADDRESSEMP_CREATE'
    EXPORTING
      EMPLOYEENUMBER         = EMPL_CONTACT_DETAILSIN-Employee_ID
      VALIDITYBEGIN          = SY-DATUM
      VALIDITYEND            = '99991231'
      ADDRESSTYPE            = '1'
      STREETANDHOUSENO       = EMPL_CONTACT_DETAILSIN-ADDRESS1
      SCNDADDRESSLINE        = EMPL_CONTACT_DETAILSIN-ADDRESS2
      CITY                   = EMPL_CONTACT_DETAILSIN-CITY
      POSTALCODECITY         = EMPL_CONTACT_DETAILSIN-PIN_CODE
   IMPORTING
      RETURN                 = tempRet
      EMPLOYEENUMBER         = EMPL_CONTACT_DETAILSIN-Employee_ID
If sy-subrc eq 0.
Status-status = 'Success'.
status-information = 'Executed successfully'.
else.
Status-status = 'Failure'.
status-information = tempRet-message.
exit.
endif.
"For creating communication details
subtype_table-subtype = '9100'.
subtype_table-communicationid = EMPL_CONTACT_DETAILSIN-EXTENTION.
append subtype_table.
subtype_table-subtype = '9200'.
subtype_table-communicationid = EMPL_CONTACT_DETAILSIN-EMERGENCY_NO.
append subtype_table.
subtype_table-subtype = '9300'.
subtype_table-communicationid = EMPL_CONTACT_DETAILSIN-AVAYA.
append subtype_table.
subtype_table-subtype = '9400'.
subtype_table-communicationid = EMPL_CONTACT_DETAILSIN-MOBILE_NO1.
append subtype_table.
subtype_table-subtype = '9450'.
subtype_table-communicationid = EMPL_CONTACT_DETAILSIN-MOBILE_NO2.
append subtype_table.
subtype_table-subtype = '9500'.
subtype_table-communicationid = EMPL_CONTACT_DETAILSIN-DIRECT.
append subtype_table.
subtype_table-subtype = '9600'.
subtype_table-communicationid = EMPL_CONTACT_DETAILSIN-HOME.
append subtype_table.
if subtype_table[] is not initial.
Loop at subtype_table.
CALL FUNCTION 'BAPI_EMPLCOMM_CREATE'
    EXPORTING
      employeenumber        = EMPL_CONTACT_DETAILSIN-Employee_ID
      subtype               = subtype_table-SUBTYPE
      validitybegin         = sy-datum
      validityend           = '99991231'
      communicationid       = subtype_table-communicationid
   IMPORTING
      return                = tempRet
If sy-subrc eq 0.
Status-status = 'Success'.
status-information = 'Executed successfully'.
else.
Status-status = 'Failure'.
status-information = tempRet-message.
exit.
endif.
Endloop.
CLEAR subtype_table.
ENDIF.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
* EXPORTING
*   WAIT          =
* IMPORTING
*   RETURN        =
"for unlocking the employee ID
CALL FUNCTION 'HR_EMPLOYEE_DEQUEUE'
    EXPORTING
      number = EMPL_CONTACT_DETAILSIN-Employee_ID
"   IMPORTING
"    return =
EMPL_CONTACT_DETAILSOUT-ADDRESS1 = EMPL_CONTACT_DETAILSIN-ADDRESS1.
EMPL_CONTACT_DETAILSOUT-ADDRESS2 = EMPL_CONTACT_DETAILSIN-ADDRESS2.
EMPL_CONTACT_DETAILSOUT-CITY = EMPL_CONTACT_DETAILSIN-CITY.
EMPL_CONTACT_DETAILSOUT-PIN_CODE = EMPL_CONTACT_DETAILSIN-PIN_CODE.
EMPL_CONTACT_DETAILSOUT-EXTENTION = EMPL_CONTACT_DETAILSIN-EXTENTION.
EMPL_CONTACT_DETAILSOUT-EMERGENCY_NO = EMPL_CONTACT_DETAILSIN-EMERGENCY_NO.
EMPL_CONTACT_DETAILSOUT-AVAYA = EMPL_CONTACT_DETAILSIN-AVAYA.
EMPL_CONTACT_DETAILSOUT-MOBILE_NO1 = EMPL_CONTACT_DETAILSIN-MOBILE_NO1.
EMPL_CONTACT_DETAILSOUT-MOBILE_NO2 = EMPL_CONTACT_DETAILSIN-MOBILE_NO2.
EMPL_CONTACT_DETAILSOUT-DIRECT = EMPL_CONTACT_DETAILSIN-DIRECT.
EMPL_CONTACT_DETAILSOUT-HOME = EMPL_CONTACT_DETAILSIN-HOME.
ENDFUNCTION.

Problem using an SAP Web service??

Hi I am currently trying to use a Web Dynpro interface to link into an SAP Web Service and search for some data. However this is not working at the moment as I believe there is an issue with my system landscape and i don't know how to resolve it. I get this error:
Caused by: com.sap.tc.webdynpro.model.webservice.exception.WSModelRuntimeException: Exception on creation of service metadata for web service mass config parameters service reference ID 'ac92ed3a-770d-428f-8b89-3dd26332b858' and application name 'demo.sap.com/poc2'. Check mass configuration has been done properly.
I already had this issue when I was trying to create a web dynpro interface of a web service that i had created. I did solve that issue however then when i published that project The data was not within the table. I am now trying this as I did not seem to be getting a reply to my previous thread which is here:
Re: Cannot get Web Dynpro app to work??!
Ok so now I have started this new project just to see weather it was the web service that was the issue. However when i publish this project i get the error. The things I have tried are below:
1. Going to the NWA of the server and going to SOA Management --> System Connection and then setting up a new connection with these settings:
General
System Type:                                        ABAP
System Name:                                       HU2
DB Host:                                                iwdf4158
Client:                                                    800
Installation number:                               0120003411
Connectivity
Services Source:                                 WSDL
URL:                                                     http://sr.esworkplace.sap.com:80/ServicesRegistrySiService/ServicesRegistrySiPort
Username:                                            sruser
Password:                                           eswork123
then from this I then tried to apply this connection to my project by going to NWA of the server and going to SOA Management --> Application and Scenario Communication --> Application Communication then I selected my project and added the provider system I had just set up as i presumed with me using a web service from SAP I would have to do this.
I then tried adding another provider system which was the local server that the instance is installed on.
Edited by: anixan on Apr 15, 2010 2:31 PM

Hi Experts,
I have found that the particular web service that I amusing is running from sr2.esworkplace.sap.com is there any way to find the settings of how to set this up in the Destination Template Manager of my server in order for the app to work. I would appreciate any help that can be offered. Thanks

Create an SAP Web Service Consumer (calling External Sharepoint Web Service from ABAP)

hi all,
i am trying to
Create an SAP Web Service Consumer (calling sharepoint Web Service from ABAP) using blog given on following link
Create an SAP Web Service Consumer (calling External Web Service from ABAP)
but when i am using my url at the end of step 3, i am getting error as follows:
i dont want to use local file option. Can anyone help me in this??
thanks in advance
regards,
SDS

Hi SDS,
you recieved a http 404 error when trying to access the Sharepoint Web service. Http 404 indicates that the resource is not reachable (cf. HTTP 404 - Wikipedia, the free encyclopedia). There could be different reasons for that. I'd suggest rubble checking the URL of the Web service first. Try to access it from a browser on you desktop. If the URL is correc. Most likely the SAP system is not able to connect to the URL. This could, for example, be due to some firewall restrictions. You should ask a SAP Basis colleague if they are able to access the URL of the Web service from the server on which the SAP system is running.
Christian

How to use SAP Router String with SAP Web Services

Hi All,
I have developed an SAP Web Service and I'm using it from a vb.net dll by using web reference.
I want to use an SAP Router string when I try to call web service but I don't how to do it.Should the url of my proxy contain this router string in itself or is there any other attribute that I should configure for this purpose?
Please help!!!
MERAL
My code is as in the followings .
(And my SAP router string is like /H/111.11.111.11/H/)
Dim srvProxy As New PSUDamacanaProxy4.Z_SDB_RFC_GetList
            srvProxy.Url = s"http://21.11.1.43:8000/sap/bc/soap/rfc"
            srvProxy.Timeout = 10000
            srvProxy.Credentials = New System.Net.NetworkCredential(strUserName, strPassword)
            srvProxy.Z_SDB_RFC_GetList(p_bayi, durum, True, miktar, telefon, expMusteri, expReturnValue, expSiparis, expTeslimat, expAdSoyad)
            musteriAdSoyad = expAdSoyad
            ReturnValue = expReturnValue
            srvProxy.Dispose()
            srvProxy = Nothing

Since I posted this question, I have abandoned the notion of
auto-generated web services and embraced the good old FDS concept
where the RemoteObject meta-tag does all the conversion work for
me. We are now using the Granite DS package and it is working well
for us. I would love to consume web services, but it just isn't
worth the hassle when all you have to do with Granite (and FDS) is
cast your return objects to the proper object type.
BTW, since this posting, I have investigated competing Flex
app frameworks. After my research, I checked out the PureMVC
framework. Wow!! Cairngorm always left me with an uneasy feeling
and I guess I am not alone. Apparently, Cliff Hall felt the same
way. That is why he started the project. I like his approach alot
more than Cairngorm especially since it includes notifications
which allow me to broadcast my own app level events independent
from the AS Event framework. Check out PureMVC. For what it is
worth, it has my humble endorsement. Cliff was even gracious enough
to acknowledge the other Adobe Consulting guys for their work. Good
for you Cliff, I respect that. Check out a better way at
http://www.puremvc.org/

Flex2 call SAP Web Service

Hello all Experts
I create a web service from sap function. I test the web service with wsadmin and the service runs well. I'd like to use Flex2 to consume the web service for test. But I met compile error in Flex2. In my Flex application, I use <mx:WebService> component. Follow is my flex code.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute"
          creationComplete="sapwebservice.BAPI_BUPA_CENTRAL_GETDETAIL.send()">
     <mx:WebService id="sapwebservice"
          wsdl="http://myhost:8011/sap/bc/srt/rfc/sap/ZWS_BUPA_CENTRAL_GETDETAIL?sap-client=600&wsdl=1.1&mode=sap_wsdl&style=rpc"
          useProxy="true">
          <mx:operation name="BAPI_BUPA_CENTRAL_GETDETAIL">
               <mx:request>
                    <Businesspartner>0000000111</Businesspartner>
                    <ValidDate>2006-08-09</ValidDate>
               </mx:request>
          </mx:operation>
     </mx:WebService>
     <mx:Panel x="20" y="20" width="480" height="400" layout="absolute"
          title="{sapwebservice.BAPI_BUPA_CENTRAL_GETDETAIL.CENTRALDATAPERSON.FIRSTNAME}">
     </mx:Panel>
</mx:Application>
When I try to compile the code, there is error called "wsdl" must end with the ';' delimiter. Does anybody know how to call sap web service in Flex?
Many Thanks

<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
creationComplete="sapwebservice.BupaCentralGetdetail.send();">
<mx:Script>
     <![CDATA[
          import mx.rpc.soap.WebService;
          import mx.collections.ArrayCollection;
          import mx.rpc.events.ResultEvent;
          import mx.rpc.events.FaultEvent;
          [Bindable]
          public var AAddr : String = "http://epmtest.dongbuchem.com:8000/sap/bc/srt/rfc/sap/BUPA_WSD?sap-client=100&wsdl=1.1&style=rpc";
<mx:WebService id="sapwebservice" wsdl=""
     result="sendHandler(event)" fault="faultHandler(event)">
Message was edited by: jinhyoung park

Useing SAP web services

Hi
how would it be possible to use SAP web services in .Net application?
Thanks in advance
Regards

try thess links - they allhave useful information:
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2131 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
Re: calling a sap webas 6.20 web service from .net
Thanks

Serialization error in SAP Web Service.

Hi all,
I have exposed a custom RFC as a Web Service. This is a simple web service that returns Customer Data (from kna1) based on the Customer ID which we provide as input.
In the RFC, I have declared an internal table (G_RET) in the tables section of the RFC.
Now, while testing the web service, I can see a check box with NULL option beside the G_RET. If i check the NULL option for G_RET, I get an error.
XML Serialization Error. Array Property [Item] in class [none] must not have NULL elements. This is restricted by schema description.
This is a high priority task. Please reply to me with any solution that you may have.
Regards,
Preksha.

Your problem has nothing to do with SAP web service. When you expose a RFC function as a web service, you are defining a service contract using WSDL technologies and XML message format enforced by the schema definition associated with the data source.
When a system consume a web service it is upto that system to provide a client framework so that it can provide an implementation enforces by the WSDL contract. Contract terms in WSDL is only applicable to data types, message types, access style and ecoding.
It is upto the client framework to provide a mechanism to send and receive the data as per the contract.
In your case, you are using a Microsoft client, so MS implementation of web service technology play a big role here.
C# XML serialization class from the MS client program you are using to call the program, read the WSDL contract and try to understand the definition and terms and conditions of the messages, types, binding.
In your WSDL you may have constraints applied at each field level of the schemas associated with the input and output messages of the web service methods.
Unfortunatly the way C# XML serialization class understand the terms and condition is confusing and it create a rum time error.
Having said this all stories now let us get into practical way.
1. Test ur web service using a non MS client
2. Make sure it is working, this isolate your issues to the way client understanding the WSDL contracts.
3. Then work with some MS guys in your shop to address this issue.
From your post I hope you are a candidate having experience in working with SAP customization project. However when ever you deal with open technologies such as JAVA, Web Services, it is highly recomended to think outside the BUNN.
AS SAP move towards more open technologies such as JAVA, WSDL, SOAP, WS, XML, XSD it is very important to elaborate your knowledge beyond the scope of a customization project.
Thanks

SAP Web Services Design Tool on Windows 7 64-bit

Hi,
I have:
- Windows 7 Pro 64-bit
- Crystal Reports 2008 Build 12.3.0.601
- Crystal Reports Server 2008 V1 SP3
I want to install the SAP Web Service Design Tool, but during the installation I get an error message :
Error 1920. Service SAPLicenseService failed to start. Verify that you have sufficient privileges to start system services
I'm administrator of this machine - be sure.
Any idea?
Best regards,
Mike

Scott,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

SAP Web services

Similar Messages

Maybe you are looking for