SAP XI installation
Dear Readers,
Is it possible to install SAP Exchange infrastructure, Adpater Engine, plain J2SE adapter engine on a single system. If yes, what should be minimum hardware requirement?
Thanks,
regards,
Jessica
Hello,
to my information it is. Please see installation guides for details:
http://service.sap.com/instguides
and klick down through NetWeaver04 to XI.
Regards,
Benny
Similar Messages
-
Problem with services of SAP after installation of ABAP on MS SQL server
Hi,
I am trying top install 2004 Netweaver ABAP+ JAVA on my machine
Following is my machine configuration -
Machine type - Windows 2003 Standard Edition SP1
Machine name - pun-idmqa-vm1
SAP Instance name - QSA
DB type - MS SQL 2000 SP4 + hotfixes and instcoll.exe is executed. After nstalling SQL shows server proper as SQL_Latin1_General_CP850_BIN2 collation
Message port - 3600
I could sucessfully install Database from CD and thereby could sucessfully install ABAP. During postinstall I tried to start the server. all the following services got up -
msg_server.exe
disp+work.exe
igswd.exe
But after some time 2nd service goes down. Following is the error message flashed in
trc file: "dev_disp", trc level: 1, release: "640"
Mon Jul 02 16:33:16 2007
kernel runs with dp version 128000(ext=102000) (@(#) DPLIB-INT-VERSION-128000-UC)
length of sys_adm_ext is 524 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 31
intno 20020600
make: multithreaded, Unicode
pid 2492
***LOG Q00=> DpSapEnvInit, DPStart (00 2492) [dpxxdisp.c 1100]
Mon Jul 02 16:33:17 2007
shared lib "dw_xml.dll" version 31 successfully loaded
shared lib "dw_xtc.dll" version 31 successfully loaded
shared lib "dw_stl.dll" version 31 successfully loaded
shared lib "dw_gui.dll" version 31 successfully loaded
Mon Jul 02 16:33:21 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 10528 (1316)
DpShMCreate: sizeof(tm_adm) 2780232 (13832)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (372)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 054B0040, size: 3192688)
DpShMCreate: allocated sys_adm at 054B0040
DpShMCreate: allocated wp_adm at 054B1B58
DpShMCreate: allocated tm_adm_list at 054B4478
DpShMCreate: allocated tm_adm at 054B44A0
DpShMCreate: allocated wp_ca_adm at 0575B0E8
DpShMCreate: allocated appc_ca_adm at 05760EA8
DpShMCreate: allocated comm_adm_list at 05762DE8
DpShMCreate: allocated comm_adm at 05762E00
DpShMCreate: allocated vmc_adm_list at 057A9AD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 057A9AF8
DpShMCreate: allocated wall_adm at 057A9B00
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
Mon Jul 02 16:33:22 2007
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 1132 MB
<ES> 1131 blocks reserved for free list.
ES initialized.
Mon Jul 02 16:33:36 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c 1462]
Mon Jul 02 16:33:38 2007
***LOG Q0K=> DpMsAttach, mscon ( pun-idmqa-vm1) [dpxxdisp.c 9719]
Mon Jul 02 16:33:46 2007
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
Mon Jul 02 16:33:47 2007
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 31
Release check o.K.
Mon Jul 02 16:34:20 2007
ERROR => W0 (pid 2740) died [dpxxdisp.c 12170]
ERROR => W1 (pid 3736) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3876) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 3896) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3852) died [dpxxdisp.c 12170]
ERROR => W5 (pid 2008) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 3776) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 4052) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-2740 (SIGUSR2)
ERROR => DpWpKill(2740, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-3736 (SIGUSR2)
ERROR => DpWpKill(3736, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-3876 (SIGUSR2)
ERROR => DpWpKill(3876, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-3896 (SIGUSR2)
ERROR => DpWpKill(3896, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-3852 (SIGUSR2)
ERROR => DpWpKill(3852, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-2008 (SIGUSR2)
ERROR => DpWpKill(2008, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-3776 (SIGUSR2)
ERROR => DpWpKill(3776, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-4052 (SIGUSR2)
ERROR => DpWpKill(4052, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 02 16:34:30 2007
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Mon Jul 02 11:04:30 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2740 Ended no 1 0 0
1 DIA 3736 Ended no 1 0 0
2 UPD 3876 Ended no 1 0 0
3 ENQ 3896 Ended no 1 0 0
4 BTC 3852 Ended no 1 0 0
5 BTC 2008 Ended no 1 0 0
6 SPO 3776 Ended no 1 0 0
7 UP2 4052 Ended no 1 0 0
Dispatcher Queue Statistics Mon Jul 02 11:04:30 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 7 ( 77%), shm 2 ( 22%)
since last update total 9, udp 7 ( 77%), shm 2 ( 22%)
Dump of tm_adm structure: Mon Jul 02 11:04:30 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Jul 02 11:04:30 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 02 16:34:35 2007
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3832) (SOFT_KILL)
Stop icman
killing process (3960) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3832 HANDLE:1600)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 02 16:34:36 2007
NiISelect: TIMEOUT occured (1000 ms)
Mon Jul 02 16:34:37 2007
[DpProcDied] Process died (PID:3832 HANDLE:1600)
[DpProcDied] Process died (PID:3960 HANDLE:1588)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'pun-idmqa-vm1'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9945]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1608
MsIDetach: detach MS-system
Mon Jul 02 16:34:38 2007
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2492) [dpxxdisp.c 8478]
Good Bye .....
I am new to SAP EP installation. Please help me regarding this issue.
Thanks and Regards,
Smithaforgot to tell you, after that probably you will need to make the installation again.
good luck. -
We looking for sap xi installation in our office, how to approach with SAP
we looking for sap xi installation in our office, how to approach with SAP Services.
What are the uses of SAP Netweaver Platform Integration,can you give me the details of this and , from where i can get this one.
And what are the components i need to buy ,plz any one of you send it to me.
Thanks & Regards,
priya reddyHi barry,
Thank you very much for u r reply
Thanks & Regards,
priya reddy -
Prerequisites for SAP XI installation?
Hi,
Could any one help me out to know the prerequisite for SAP XI installation?
Thanks & Regards,
Yaseen Mahammad.HI Yaseen,
The prerequisite for SAP XI installation are
1> You just require to have a WAS (WEB APPLICATION SERVER 6.40 ) installed with a ABAP stack as well as java stack.
2> You need to have a SLD installed.It can be on same or different system.
Its better if you follow the Master installable.
If you are installing XI 2004s it asks you for all the options in a sequence , for which all components you wish to install(eg. XI or MI etc) on your WAS.
Regards,
Yomesh -
SAP DB installation failed!
Hi ,
i am installing content server & cache server on my machine.
while installing i am getting the following error:
"SAP DB installation failed"
i had uninstalled once, and renamed the SAP DB to run the installtion only to find the above mentioned error.
what could be the problem?
Any inputs would be highly appreciated.
Thanks,
Ravihi sunil,
I m also facing the same problem, i m installing SAP content server in a Windows XP machine with 1 GB RAM and Enough HD space.
While installtion it give me SAP DB installation (SID) Failed.
Kindly suggest ASAP -
SAP EHP6 Installation Steps with Oracle RAC
Dear Experts,
i am looking for step by step guide for SAP ehp6 installation with Oracle RAC. if anyone can help please guide me with the steps or share if any document available
ThanksHi Wali,
You can follow below documentation to perform your installation on Oracle RAC.
http://scn.sap.com/docs/DOC-8835
This document is very useful for planning the installation and executing the same
Some other useful documents
Installation of SAP on RAC with Oracle ASM
SAP note which needs to be referred for installation
Note 527843 - Oracle RAC support in the SAP environment
Hope this helps.
Regards,
Deepak Kori -
Problem in SAP Server installation with Oracle DB
Hi,
We are working in SAP Server installation with Oracle DB. After some steps in our Process it is asking for a DVD called RDBMS DVD CLIENT ORACLE. We are trying to download in Service market place. But we could not get the Correct DVD for the installation. Please help in this issue. Where do we get the DVD to continue our SAP Server installation.
We are struck with our SAP Server installation. Please consider this issue as very urgent.
thanks in advance.
Regards,
Mohankumar.GHello Mohan,
Please specify which installation your are doing otherwise it is difficult to provide you
the correct path.
For eg if you are doing NW04's installation then path will be
downloads->entry by application group->Installations and Upgrades->SAP NetWeaver-> SAP NETWEAVER-> SAP NETWEAVER 2004S->according to OS/DB (there is oracle client cd)select the cd.
hope it helps..
Regards,
Jafer -
SAP BPC installation - Errors during setup in the create database step
Hi! I have a real big problem installing SAP BPC. It's a Microsoft multi-server installation.
I've got two servers: 1) the database server with the SQL Database and Analysis Server 2) the application server with all the rest.
I log on and I installed everything on the servers with a specific domain user: this user is administrator on both servers and even on SQL Server.
My problem occours when I execute the "SAP BPC setup" on the application server: during the "create database" step I receive two errors:
first error pop-up:
Error ([SQL-DMO]This cache contains no result sets, or the current result set contains no rows.)
second error pop-up:
System.Data.SqlClient.SqlException: Cannot open database "ApShell" requested by the login. The login failed. Login failed for user MyDomain\MyUser
After the SAP BPC setup:
- in the SQL Database Engine the ApShell database was created
- nothing for ApShell was created in Analysis Sever
- in the Even Viewer of the database server I've got this error: Login failed for user 'MyDomain\MyUser'.
It's very strange because if from the application server, using "SQL Server Management Studio" (always with 'MyDomain\MyUser'), I connect to the database server: I can login, create and delete databases on the SQL Database Engine and even on Analysis Server without any sort of problem.
To complete my status, I can say you Analysis Sever is on the default port. I use SQL Server 2005 and I even tryed to reinstall it and SAP BPC but nothing change.
At this point I checked these two topics on this forum:
Mulit-Server Install - Installation fails while creating AppServer Database
Problem during BPC installation
1) At first I tryied this solution:
Into multiserver installation guide is specified that actually in case of multiserver environment you have to copy apshell.db9 file from installation kit into db server. Into a drive from where SQL server is able to read when you are doing restore with Management Studio.
During the installation you have to go into advance options and to specified the path (local path from db server where you did the copy of apshell.db9).
but nothing change: the "SAP BPC setup" problem I have still persists.
2) Then I tryed this workaround:
If so, you can try a "restore appset" from server manager. Rename the Apshell.db9 file (or copy it) and name it Apshell.bak
During server manager restore, point only to the Apshell.bak file. Server Manager will tell you that webfolders and filedb files are missing, but it found the webfolders and filedb (again, only if the original bpc installation successfully created those folders)- and then it will try to restore Apshell.
That may work in spite of whatever problem is keeping the installation program from performing the same tasks.
but the "restore database" fails > I've got the error written in red: OLAP database - fail
What can I do to solve the problem? If it is necessary, I can reinstall SQL Server and SAP BPC but I need to know the way to solve the setup error.
Thanx very much in advance for your kindness if you can help me.Thanx very much to everyone for the kind support. Unfortunatly, my problem persists.
- SQL server is EE.
- I installed SQL server (including SSAS) using MyDomain\MyUser.
- MyDomain\MyUser is windows administrator on both servers.
- MyDomain\MyUser is SQL Server and SSAS administrator.
- SSAS service is running under the same service account than the SQL Service.
- All my MSSQL services runs as Local System.
- I'm installing SAP BPC using MyDomain\MyUser.
- I also checked the SSAS service account specific rights to the SSAS data folders.
SAP BPC installation still fails exactly as above (popup errors during SAP BPC setup, no ApShell etc. etc).
In the database server, windows event viewer errors after the unsuccessful installation are:
1) SOURCE: MSSQLSERVER
Failure Audit: Login failed for user MyDomain\MyUser
2) SOURCE: MSSQLSERVER
BackupDiskFile::OpenMedia: Backup device 'MyPath' failed to open. Operating system error 5(Access is denied.).
As regard as point 1: The Failure Audit error into the event viewer happens only during SAP BPC installation. Otherwise it is always Success Audit.
Also, as I told you, if from the application server I connect with SQL Server console to SSAS, located on the database server, using MyDomain\MyUser: I can create delete SSAS dbs without any sort of problem.
For point 2:
I tried 4 differents SAP BPC installations as follows:
- to go into advance options and to specified the path (local path from db server where I did the copy of apshell.db9).
- to go into advance options and to specified the path (local path from application server where is the copy of apshell.db9).
- to go into advance options and to specified the path (network path of a share folder with apshell.db9 and permissions to everyone)
- to don't go into advance options and to don't specify the path.
but every time nothing change: the "SAP BPC setup" problem I have during my initial post still persists. In the same way I written at the beginning of the topic.
I don't know how to solve it.
Edited by: Francesco Andolfi on Jan 5, 2011 6:37 PM -
SAP HA Installation - Windows 2012 with Sybase
Dear All,
I have just started the SAP HA Installation with Sybase Database on Sybase, but I am facing an issue in the First Cluster node installation.
First Cluster Node( Last error reported by the step: Windows system error message: 5942. Message: 'The resource failed to come online due to the failure of one or more provider resources. '.). You can now:
Cluster Even Logs -
Cluster network name resource 'SAP SBP NetName' failed to create its associated computer object in domain '***-co.com' during: Resource online.
The text for the associated error code is: Access is denied.
Please work with your domain administrator to ensure that:
- The cluster identity '***-PRD$' has Create Computer Objects permissions. By default all computer objects are created in the same container as the cluster identity '***-PRD$'.
- The quota for computer objects has not been reached.
- If there is an existing computer object, verify the Cluster Identity '***-PRD$' has 'Full Control' permission to that computer object using the Active Directory Users and Computers tool.Dear All,
I have just started the SAP HA Installation with Sybase Database on Sybase, but I am facing an issue in the First Cluster node installation.
First Cluster Node( Last error reported by the step: Windows system error message: 5942. Message: 'The resource failed to come online due to the failure of one or more provider resources. '.). You can now:
Cluster Even Logs -
Cluster network name resource 'SAP SBP NetName' failed to create its associated computer object in domain '***-co.com' during: Resource online.
The text for the associated error code is: Access is denied.
Please work with your domain administrator to ensure that:
- The cluster identity '***-PRD$' has Create Computer Objects permissions. By default all computer objects are created in the same container as the cluster identity '***-PRD$'.
- The quota for computer objects has not been reached.
- If there is an existing computer object, verify the Cluster Identity '***-PRD$' has 'Full Control' permission to that computer object using the Active Directory Users and Computers tool. -
SAP IDES installation in a DELL Inspiron 3537 i3 - 4th Gen DOS Operated
Hi Experts,
I am going to buy a DELL inspiron 3537 15 inches 4th Gen. i3 -4010 U processor, DOS operated RAM - 8GB, HDD - 750 GB or 1 TB.
I need to install latest SAP IDES version in this laptop (both type of access, directly from laptop or Virtual/Remotely).
Does DOS operated system supports SAP IDES installation?
Can we install SAP IDES on Windows 8.1 or DOS is mandatory?
Kindly suggest at earliest as I need to buy it by today or tomorrow.
Thanks in advance.
Regards,
SandeepDear Sandeep
on windows 8.1 we are not able to install sap exports bcaz win 8.1 is operating system but we need server operating system to install sap which are window 2003,2008,2012 if you purchase win 8.1 license version you have to format whole laptop and license version will be of not use
there is option if you want run you sap on VMWARE (virtual machine) then it possible that you can use it on win 8.1 laptop bcaz vmvare open new operating system on existing win 8.1
Thanks -
Hi,
I need to install SAP FIORI in my landscape. I want to know can I install 1) Netweaver gateway 2) Netweaver addon 3) Fiori apps on same ERP server.
Or its recommended to have netweaver system and ERP server separately.
Regards,
raiHi Rai,
See this links are usefully
SAP Fiori for SAP Business Suite – SAP Help Portal Page
Architecting an SAP Fiori deployment
SAP Fiori Installation and Configuration
Regards,
Chinna -
SAP Cluster Installation instance number issue
Hi,
We had some problem about the sap cluster installation .
OS : AIX 6.1
Database : DB2
We are trying to install the sap cluster under AIX + DB2.
But we are not sure whether we have
CI instance = 00
DI instance = 03
will it have problem . ( e.g. will we need to adjust the transport
configuration eachange due to the instance number different )
Because we had saw other case on window which is
CI instance = 00
DI instance = 00
So which is working fine and no problem.
Please help and give some recommendations. We would like to confirm is window / aix the same , are there any concern here( CI instance is need to different
with DI or not , if not what will be affect. ) .
RegardsHi,
Per my understanding the
stms > system overview > [SID of the cluster] > Display TMS Configuration : System xxx > communicate tag > RFC Address
on that column is not able to use logon group.
But if you not setting that part correctly , then the auto transport is not able to do e.g. QAS forward the request to PRD
Am I correct ?
thx,
Tony -
Hi All,
I want to install the SAP frontend in my system. Can anybody give me the link where can i find the same or can anybody give me the S/W to install the same in my machine.
Appriciate for you help.
Thanks
LinconHi
Check this link..
http://www.sap-img.com/basis/sap-installation-procedure-on-win-2k-adv-server.htm
Here are the link which will explain the procedure
http://www.sap-img.com/basis/sap-ides-installation-procedure-for-sap-install-on-w2k-server.htm
http://www.sap-img.com/basis/sap-installation-procedure-on-win-2k-adv-server.htm
Regards
Anji -
SAP GUI installation issue.
Hi All,
I am trying to install SAP GUI640v16 on my machine (Windows XP).
In the middle of the installation, I'am getting an
error like:
Your computer needs to be restarted due to pending system changes. It is not safe to continue without a reboot.
How do i resolve it?
Thanks in advance.I have only seen this at the beginning of the installation. You can check the following Registry Key to determine if a restart is required:
<b>HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\UpdateExeVolatile</b>
Value in RegEdit Meaning
0x00000000 (0) No pending restart.
0x00000001 (1) A software update removal is pending a restart.
0x00000002 (2) A software update installation is pending a restart.
'// 0x00000003 (3) Both an installation and a removal are pending a restart.
As Rich mentioned, cancelling the install, Restarting and re-running the installation should fix the problem.
Cheers,
John -
Error in Java deployment step of SAP Netweaver installation
Hi Team,
We are installing SAP Netweaver 7.4 SR2.
We are using How to install SAP NetWeaver Application Server Java guide.
We have completed all steps upto step 27 without much hiccups, but during Java deploy stage, we are getting errors related to port 50004.
We have restarted the machine and continued the installation .but are still getting the error.
We have checked the heap size -- Its value is 1024mb.
Do not know what is wrong with this.
We have assigned 4 GB Ram and Paging is also set as per requirement. Previously we had used 3.5 GB RAM
Attaching the log files:
In deploy_api.0 log file we are getting lots of messages as:
Mar 20, 2015 4:09:29 PM Error:
Mar 20, 2015 4:09:29 PM Error: com.sap.ASJ.dpl_api.001260 Cannot connect[ ConnectionException ].Reason: [ERROR CODE DPL.DCAPI.1144] Could not establish connection to AS Java on [SMDDev:50004]. No alive connection. Check state of the server. Check if the host and port specified are correct and AS Java is up and running.
Mar 20, 2015 4:09:29 PM Info: com.sap.ASJ.dpl_api.001263 Destroy command:[deploy]
Mar 20, 2015 4:31:55 PM Info: com.sap.ASJ.dpl_api.001257 Log file is [C:\Program Files\sapinst_instdir\NW740SR2\MSS\INSTALL\STD\log\dc_log\deploy_api.0.log]
Mar 20, 2015 4:31:55 PM Info: com.sap.ASJ.dpl_api.001258 Trace file is [C:\Program Files\sapinst_instdir\NW740SR2\MSS\INSTALL\STD\log\dc_log\deploy_api.0.trc]
Mar 20, 2015 4:31:55 PM Info: com.sap.ASJ.dpl_api.001259 Init command:[deploy]
Mar 20, 2015 4:32:07 PM Error: com.sap.ASJ.dpl_api.001224 Could not establish connection to AS Java on [SMDDev:50004]. Cannot establish connection with any of the available profiles:
url=SMDDev:50004 protocol=p4 (None); Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 172.16.35.110 and port: 50004
Check if server is started, access point for the protocol is available, and IP/Host name is accessible on network.. Check if the host and port specified are correct and AS Java is up and running.
Mar 20, 2015 4:32:08 PM Error:
Mar 20, 2015 4:32:08 PM Error: com.sap.ASJ.dpl_api.001260 Cannot connect[ ConnectionException ].Reason: [ERROR CODE DPL.DCAPI.1144] Could not establish connection to AS Java on [SMDDev:50004]. Cannot establish connection with any of the available profiles:
url=SMDDev:50004 protocol=p4 (None); Reason: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection to host: 172.16.35.110 and port: 50004
Check if server is started, access point for the protocol is available, and IP/Host name is accessible on network.. Check if the host and port specified are correct and AS Java is up and running.
Mar 20, 2015 4:32:08 PM Info: com.sap.ASJ.dpl_api.001263 Destroy command:[deploy]Hi Suraj,
Hope you are doing good.
Nice to hear from you again. It looks like P4 connection is affected:
1)
Review note 1158626 and adjust the P4 port configuration accordingly. You will need to check whether the P4 port is available. Note 1925352 will help you to check this (you can use the sapcontrol command or others mentioned to check whether host: 172.16.35.110 and port: 50004 is available or not).
2)
Make sure that there are no invalid profile files. Kindly move the profile files that are old to some other location.
3)
Also, please verify that you don't have any non-deterministic names in the etc/hosts file, per SAP note:
1134222 - Cannot access AS Java via P4 connection
Hope this helps.
Kind Regards,
Hemanth
SAP AGS -
Hi
I am Installing SAP NW 2004 on AIX 5.3 + Oracle Database. At the Software Unit Installation Phase I am getting the following Error
ERROR 2009-10-15 14:22:31
CJS-30156 SDM deployment failed for at least one of the components to deploy.<br> SOLUTION: Check '/tmp/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/callSdmViaSapinst.log' for more information.
There is no clutser control instance running on host SAPPEP which is described in SecureStorage .
ERROR 2009-10-15 14:53:59
FCO-00011 The step enableUsageTypes with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|4|0|enableUsageTypes was executed with status ERROR .
I am getting the following error in callSdmViaSapinst.log
15, 2009 2:46:47 PM Info: Starting: Initial deployment: Selected development component 'com.sap.netweaver.bc.logging'/'sap.com'/'SAP AG'/'7.0009.20060825141640.0000'/'1' will be deployed.
Oct 15, 2009 2:46:47 PM Info: SDA to be deployed: /usr/sap/PEP/JC00/SDM/root/origin/sap.com/com.sap.netweaver.bc.logging/SAP AG/1/7.0009.20060825141640.0000/com.sap.netweaver.bc.logging.ear
Oct 15, 2009 2:46:47 PM Info: Software type of SDA: J2EE
*Oct 15, 2009 2:46:47 PM Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) ******
Oct 15, 2009 2:46:47 PM Info: Starting cluster instance processes.
Oct 15, 2009 2:46:47 PM Error: An error occured while starting a cluster instance.
Oct 15, 2009 2:46:47 PM Error: There is no clutser control instance running on host SAPPEP which is described in SecureStorage .
The instances, returned by MessageServer [MS host: SAPPEP; MS port: 3901], are :
|Name:JM_T1255592807640_1_SAPPEP |Host:SAPPEP |State:5|HostAddress:172.31.199.240|
Please check if there is an appropriate running cluster instances.
*Oct 15, 2009 2:46:47 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) ******
Oct 15, 2009 2:46:47 PM Error: Aborted: development component 'com.sap.netweaver.bc.logging'/'sap.com'/'SAP AG'/'7.0009.20060825141640.0000'/'1', grouped by software component 'KMC-BC'/'sap.com'/'SAP AG'/'1000.7.00.9.0.20060827081000''/'1':
SDM could not start the J2EE cluster on the host SAPPEP! The online deployment is terminated.
There is no clutser control instance running on host SAPPEP which is described in SecureStorage .
The instances, returned by MessageServer [MS host: SAPPEP; MS port: 3901], are :
|Name:JM_T1255592807640_1_SAPPEP |Host:SAPPEP |State:5|HostAddress:172.31.199.240|
Please check if there is an appropriate running cluster instances.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineJ2EE620OnlineDeployerImpl.performAction(DeploymentActionTypes).STARTUP_CLUSTER)
Oct 15, 2009 2:46:47 PM Info: Starting to save the repository
Oct 15, 2009 2:46:48 PM Info: Finished saving the repository
Please Suggest
Regards
Soumya DasguptaThanks
The Issue is Solved as per you Suggestion
Regards
Soumya Dasgupta
Maybe you are looking for
-
Error message in UI Table element
Hi Experts, I am having a UI table element in my view. If there are zero records fetched in the select query, i am displaying an error message using message class in the top of the screen. Is it possible to display this error message inside the UI ta
-
How come since updating to ios 6.1.2 AOL emails are not being pushed?
Since updating the only way my iphone 4s receives emails is by manually checking. How do I fix this???
-
Hi, What is Report Painter/ Writer? What are T-Codes? What is General Ledger Report, Debit Analysis Report in FI? Thanks Seshu.
-
Problem in using the RFC model in webdynpro aplication
Hi, I am trying to access FM CRIF_GET_EMPLOYEE_FOR_USER from the backend system in webdynpro application in two different ways 1.By using JCO classes in a java class IRepository repository; public int getPernr(String user) int ret = 0; String use
-
Webdynpro content administrator
Hi All, I am able to access Webdynpro content administrator & webdynpro content through the 50000 port only. but we have IIS sitting infront of it on port 80. when i try to access the webdynpro content or content administrator through http://host/<w