SAP XI JDBC Adapter

Hi,
I have few question and I am requesting you to answer my questions.
1. What is the purpose of Program ID to specify when we configure the Sender RFC communication Channel?
2. How to get the JDBC Driver name , connection parameters, Host and Port for the JDBC Communication channel configuration. My Basis consultant said, he has not aware this JDBC Adapter?
I need to use JDBC Adapter for my JDBCXIFile Scenario. Please explain me the step by step procedure. Please explain me from where we need to get the above parameters and JDBC Driver already configued in XI. I need the Driver name with syntax and connection parameters, host and port.
3. Where we need to write the SQL Query for SELECT, INSERT, DELETE, and UPDATE in configuring the Receiver JDBC Communication channel?
I am very thankful to you in advance.
Nagarjuna.

Hi,
I have few question and I am requesting you to answer my questions.
1. What is the purpose of Program ID to specify when we configure the Sender RFC communication Channel?
Program ID : Program ID of the registered server program. The selected program ID must uniquely describe the RFC sender channel in the configured gateway (Application Server (Gateway) and Application Server Service (Gateway) parameters). Also this program where you execute your RFC function with specified RFC destination.
2. How to get the JDBC Driver name , connection parameters, Host and Port for the JDBC Communication channel configuration. My Basis consultant said, he has not aware this JDBC Adapter?
I need to use JDBC Adapter for my JDBCXIFile Scenario. Please explain me the step by step procedure. Please explain me from where we need to get the above parameters and JDBC Driver already configued in XI. I need the Driver name with syntax and connection parameters, host and port.
Host and Port for the JDBC Communication channel configuration: there are DB parameters which you are using.
info about installation drivers for JDBC & JMS adapters
FIRST: drivertool you can find at https://www.sdn.sap.com/irj/sdn/howtoguides
Then Exchange Infrastructure How-to Guides for SAP NetWeaver 2004 How to Install and Configure External Drivers for JDBC & JMS AdaptersDownload attached system files (ZIP 16KB)
SECOND:installation guiade:
External Driver Configuration for Process Integration 7.0
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60237e74-ef19-2b10-5a9b-b35cc6a28e83
Tips and Tutorial for Sender JDBC Adapter
/people/yining.mao/blog/2006/09/13/tips-and-tutorial-for-sender-jdbc-adapter
File-to-JDBC(Receiver JDBC)
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
3. Where we need to write the SQL Query for SELECT, INSERT, DELETE, and UPDATE in configuring the Receiver JDBC Communication channel?
You write them in action tag in Message Mapping.
For the details find "Document Formats for the Receiver JDBC Adapter" on help.sap.com
BR,
Dzmitry

Similar Messages

JDBC Adapter Issue

Hi Experts,
I have an issue with my XI JDBC adapter. Once a job gets sent through XI (from nonSAP to XI to SAP), the JDBC adapter is required to write a confirmation in the database that the job was processed in SAP.
When I go into my Adapter Monitor (http://system:num/AdapterFramework/) I see a red dot beside JDBC and the following error:
Error: Transform error in xml processor class, rollback:
ERROR:Processing request: Error when executing statement for table/stored proc. 'stfx.job_copy': com.mysql.jdbc.exceptions.MySQLNonTransientConnectionException: No operations allowed after statement closed.
Any ideas??

Hi Bhavesh,
I update with the XML coming out of XI. All I need to update is the status. This XML currently does come out of XI and would be sent back to my database, except for the fact that the JDBC adapter goes down, and I get the originally mentioned error. The XML looks like:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_UPDATE_STATUS xmlns:ns0="http://tssi.ycdsb.ca">
- <STATEMENTNAME>
- <dbTableName action="UPDATE">
<TABLE>sfx.job_copy</TABLE>
- <access>
<status1>DONE</status1>
<status2>DONE</status2>
</access>
- <key>
<jobId>00595593</jobId>
<status1>NEW</status1>
<messagenm>d3e98e294bfcd2d5d3e98e29</messagenm>
</key>
</dbTableName>
</STATEMENTNAME>
</ns0:MT_UPDATE_STATUS>
Any ideas?

JDBC Adapter - Sender - Stored Procedure - SQLException Error

Hi,
     I have created one stored procedure in our Oracle database. I give below that stored procedure.
CREATE OR REPLACE PROCEDURE sp_stud
IS
    l_row student%ROWTYPE;
    TYPE t_ref_cursor IS REF CURSOR RETURN l_row%TYPE;
    c_cursor t_ref_cursor;
BEGIN
    OPEN c_cursor FOR
     SELECT *
     FROM student where readflag= ' ';
    LOOP
     FETCH c_cursor into l_row;
        EXIT WHEN c_cursor%NOTFOUND;
        DBMS_OUTPUT.PUT_LINE(l_row.id || ' : ' || l_row.name);
    END LOOP;
close c_cursor;
END;
This is a procedure to retreive rows from the table student which is having the field read_flag = ' '; (Student table contains the fields ID, NAME, BIRTHYEAR, BIRTHMONTH, READFLAG).
In JDBC Sender Adapter, I set the values for the following fields under Parameters tab.
Query SQL Statement: EXECUTE sp_stud
Update SQL Statement: UPDATE student SET readflag = 'Y' where readflag = ' '
The scenario is every 5 minutes JDBC adapter checks the table whether any new row is inserted, if it is inserted and commit, it will send that record to File. This is the Scenario.
In Runtime Workbench, Communication Channel Monitoring, it shows the following error, when JDBC Polls the table.
Database-level error reported by JDBC driver while executing statement 'EXECUTE sp_stud'. The JDBC driver returned the following error message: 'java.sql.SQLException: ORA-00900: invalid SQL statement '. For details, contact your database server vendor.
Note : If we execute the Stored Procedure ad SQL command level, it works fine.
Kindly help friends to solve this, where the error is happened.
Thanking you,
Kind regards,
Jegatheeswaran P.

Hi,
Not a Database expert. But , in case you have not seen the note pointed by Deepu,
<i> The JDK 1.1.x, 1.2 and 1.3 versions (classes111. zip, classes12.zip, classes12.jar) of the driver are not compatible with the SAP XI JDBC Adapter. Use the JDK 1.4 driver (ojdbc14.jar) instead. For details, refer to Oracle MetaLink note # 203849.1.
           <b>Invoking Oracle stored procedures from within a JDBC sender channel is only possible for Oracle DBMS versions >= 10.2.x using so-called table functions:</b>
           Example:
pkg1 -
CREATE PACKAGE pkg1 AS
TYPE numset_t IS TABLE OF NUMBER;
FUNCTION f1(x NUMBER) RETURN numset_t PIPELINED;
END pkg1;
CREATE PACKAGE BODY pkg1 AS
-- FUNCTION f1 returns a collection of elements (1,2,3,... x)
FUNCTION f1(x NUMBER) RETURN numset_t PIPELINED IS
BEGIN
    FOR i IN 1..x LOOP
      PIPE ROW(i);
    END LOOP;
    RETURN;
END;
END pkg1;
pkg1 -
        <b>   This function has to be invoked from the sender channel configuration (SELECT statement) as follows:
           SELECT * FROM TABLE(pkg1.f1(5));</i></b>
Check this, confirm your Oracle DB version and then use the Table Functions as described in this note.
A Database Expert wil be able to crack this for sure.
Regards
Bhavesh

Data transfer from SQLDB to SAP R/3 without JDBC adapter

Hi Experts,
Please suggest the possible methods of transferring data from SQLDB to SAP R/3 without using a JDBC adapter at sender side.
Regards,
Kalyan

Hi KKC242 ,
Please suggest the possible methods of transferring data from SQLDB to SAP R/3 without using a JDBC adapter at sender side.
> Data links can work..but not recommended..and that too will be with out using PI.
any way we hav eto connect to the database...even without adapter..by using a OLEDB/JDBC connector...in VB.. an dsend it across to PI
Regards ,

Populating SAP Database table using JDBC adapter

Hi Folks,
I have a requirement to populate a SAP database table say ZTABLE using XI. The Model is the table has to be populated through a file which will be processed by SAP XI. Basically this is a File to JDBC scenario. The database used is ORACLE. Kindly provide me some idea to go ahead.

I tried to place the MS access table in the shared folder of the Application server system but still it seems the table is not being populated.
did you check the log in your receiver channel? (/people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn)
The requirement is to update the tables directly as those are the custom tables.
i would still say that do not update SAP tables directly from XI/ PI.....this is not a standard architecture/ solution....

Regarding JDBC Adapter in SAP XI

Hi
I have done one scenario in SAP XI using JDBC Lookup it is working fine thanks for all who were helped me ......
I need a clarification on following
What is
Generic Lookup API
Special Lookup API
and while i am configuring i have given
Persistence : Local
Confilct Resolution : Redo
In what situation we will give Presistence : Local and in what situation we will give Persistence : Database means i need to know where we will use LOCAL and where we will use DATABASE
and what is the difference between REDO and ERROR...........?
In Message Protocol we have two protocols
XML SQL Format
Native XML Format
what is the difference between these two
I have gone through some blogs which i got in my previous posts but i am not able to understand clearly..... can any one clarify my doubts please........?
Best Regards
Ravi Shanakar B

Generic Lookup API
In the case of generic access, before executing the lookup, developers first need to both build the payload that the adapter expects and parse the result payload themselves.
To access an application system generically, developers use the SystemAccessor class. For generic calls, developers of a method must pass a stream with the payload, which is then sent to the adapter. The result of the call is a payload object, which you can use to both read the payload as a stream and parse the payload.
The generic lookup API is part of the mapping API (see LookupService class in the Javadoc documentation). For more information about these APIs, see SAP Developer Network at https://www.sdn.sap.com/irj/sdn/javadocs
You can obtain the schema to call an RFC by simply importing the RFC into the Integration Repository. (See Importing IDocs and RFCs.)
Special Lookup API
For access using the special lookup API, developers do not require any knowledge of the structure of the payload. Instead, they pass the API string commands that are to be executed in the application system called.
Currently, there is one special lookup API for the JDBC adapter. To use this API, developers use the DataBaseAccessor class instead of the SystemAccessor class.
The special lookup API is part of the mapping API (see the getDataBaseAccessor method of the LookupService class in the Javadoc documentation). For more information about these APIs, see SAP Developer Network at https://www.sdn.sap.com/irj/sdn/javadocs
XML SQL Format
Table values can be inserted, updated, or deleted in one or more tables. In the database, stored procedures can be called using transfer parameters. In the case of synchronous queries, results from database queries or return values of stored procedures can also be transferred.
Native SQL String
An arbitrary SQL statement is expected as the message content. This statement is transferred unaltered to the database for processing
Please see the below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/406642ea59c753e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm
Regards
Chilla..

JDBC adapter to SAP: select & join from multiple tables ???

Hello,
I have a task to get an aggregating information from two tables and send it into SAP.
I use XI JDBC sender adapter to access to MSSQL DB.
I know how to construct SQL quiery:
(something like that)
SELECT table1.Date SUM(table1.sum) from table1
INNER JOIN table2
ON table1.Number = table2.Number
But I don't understand how to construct Data Type for this complex select operator?
How does it look like?
Where to store and how to map the selected data?
Please give me an example or an advice.
Thank You.

Hi,
Use your structure like this.
<StatementName4>
<dbTableName action=SELECT>
<table>realDbTableName</table>
<access>
<col1/>
<col2/>
<col3/>
</access>
<key1>
<col2>val2old</col2>
<col4>val4</col4>
</key1>
<key2>
<col2>val2old2</col2>
</key2>
</dbTableName>
</StatementName4>
action=SELECT
Statements with this action cause existing table values to be selected. Therefore, the statement corresponds to an SQL SELECT statement.
The <access> block contains the column names to be selected, a <key> element contains the columns whose values must be identical with the specified value to get the new column values. The name of the <key> element is arbitrary. Column values within a <key> element are combined with a logical AND; different <key> elements are combined with a logical OR.
A statement with the action SELECT must have exactly one <access> element. The number of <key> elements with arbitrary names is not restricted.
The corresponding SQL statement for StatementName4 in the example above is as follows:
SELECT col1,col2,col3 FROM dbTableName WHERE ((col2=val2old AND col4=val4) OR (col2=val2old2))
If there is no <key> element, or if there is a <key> element but it is empty, then no condition is specified and the entire table is to be selected. This may not be permitted by the configuration of the JDBC adapter for security reasons and will therefore result in an error during message processing and an appropriate error message.
The response document contains the result of the action in XML format as follows:
<row>
<column1>value11</column1>
<column2>value12</column2>
</row>
<row>
<column1>valueN1</column1>
<column2>valueN2</column2>
</row>
This will help you.
regards
Aashish Sinha
PS : reward points if helpful

Problem in JDBC Adapter in SAP PI 7.0

Hi Everyone,
I have scenario JDBC to JDBC......I Designed and Configured the Scenario....When I executed the scenario my connection to the
PI dev server is lost........
Then in Config tool I setting jdbc adapter option to "manual" which is "always".....and deactivated the JDBC communication
channel.....then I set the option to "always" from "manual" in config tool.......
I am not getting exact problem.....Please help me out.....
Regards,
Sudheer

Hi,
I explain you my scenario once again...................i.e JDBC to JDBC......
I am using MS-Access as database............
I have completed IR part and in ID part I configured Sender Communication channel by giving the following Connection details
sun.jdbc.odbc.JdbcOdbcDriver
jdbc:odbc:Driver= {Microsoft Access Driver (.mdb)};DBQ=C:\XI_FILES\SENDER\Student_Database.mdb*
After completing RD/ID/SA/RA....as soon as I activated CC.....there gone connection to Server and cannot open the IR or ID or
Runtime Work Bench.......
If I enter SXMB_IFR in Dev sever...it is giving error "Enterprise Service Repository address not maintained"......
After that with some discussions with Basis people they have found that J2ee engine stoped. then in Config tool they
changed jdbc adapter settings to "Manual" so that we can deactive CC that is activated.......Then after that "manual" is
changed to "Always" and now Server is running fine.....
My probelm is......
When I am activating CC, the server is going down immediatledy.....and I dont know exactly where the problem is
occurring........
Regards,
Sudheer

Pass system ack of JDBC adapter to ERP in IDoc - XI - JDBC scenario

Dear all,
i have an IDoc -> XI -> JDBC scenario (without using ccBPM). In the standard way the ERP system, sending the IDoc waits for an application acknowledgement. However the JDBC adapter is only capeable to send system acknowledgements.
Is there a way to pass these acknowledgements to the IDoc status record?
In help.sap.com (http://help.sap.com/saphelp_nwpi71/helpdata/en/ab/bdb13b00ae793be10000000a11402f/frameset.htm) under "IDoc Processing with the IDoc Adapter " there is a table that maps XI system/applic acknowledgement to IDoc status. So in my opinion the status record of my IDoc should at least chenge to the corresponding status for the system ack.
Can anyone tell, if this is really working? What if I deactivate the acknowledgement request in the NOALE programm?
In any case, can I achieve to transfer the system ack to the IDoc status without using a ccBPM?
Many thanks and best regards
Florian

Is there a way to pass these acknowledgements to the IDoc status record?
Without BPM, No.
So in my opinion the status record of my IDoc should at least chenge to the corresponding status for the system ack.
The ack referred here is related to idoc status whether it is properly reached till XI or not and not related to the JDBC ack.
What if I deactivate the acknowledgement request in the NOALE programm?
Then u won't have any ALEAUD message at sender R3.
In any case, can I achieve to transfer the system ack to the IDoc status without using a ccBPM?
No
Regards,
Prateek

JDBC Adapter - Established database connection failed

Hi Guys,
we have installed the JDBC Adapter based on the How To Guide and we checked after the installation the Libaries :Cluster --> Server --> Libraries --> com.sap.aii.af.jmsproviderlib and the box Box "JARs Contained" was filled.
So in my point of view we have done everything right during the installation.
Now the developer tested theJDBC Adapter and he comes back with following Error:
Attempt to establish database connection failed with SQL error com.sap.aii.adapter.jdbc.sql.DriverManagementException: Cannot establish connection to URL "jdbc:microsoft:sqlserver://xxx.x.xx.xxx:1433; databaseName=CZZ03;":ClassNot FoundException: com.microsoft.sqlserver.jdbc.SQLServerDriver
Do you have any ideas?
Regards
Markus

Hello Markus,
To install JDBC driver follow the how to guide.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20install%20and%20configure%20external%20drivers%20for%20jdbc%20and%20jms%20adapters.pdf
Configuration of JDBC Adapter for SQL Server
JDBC Driver = com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection = jdbc:microsoft:sqlserver://hostname:<port>;DatabaseName=<DBName>
UserID and Password.
If the connection is not working find the correct port number.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033
JDBC- X I - R/3 Scenario
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Thanks,
Satya Kumar
Reward Points If it is Useful..

Reg: How to Stop Polling of JDBC Adapter without Scheduling the adapter

Dear Gurus,
Here I am having one requirement. My clients wants to send data from JDBC adapter (ORcale System table) to R3 system via RFC.
His Requirement::
1. He is not telling the time of data flow from Oracle server so that based on that we can schedule the adapter in the Communication Channel monitoring (Availablitiy Time Planning) or Else we can Schedule by deciding the setting of the polling interval time.
2. He is telling that When ever he waants to send the data he will place one dummy file in the File Adapter FTP location so that it will became an Indication for u to poll the jdbc adapter and to transfer the data to R3.
3. Untill he keeps the file or gives indication he doesn;t want to communicate with Oracle server due to some security and it s a most important data base he doesn't want to disturb that Oracle Server as so many business are running on that.....
We Proposed::
1. Atleast you need to tell the scheduling time or poll interval time so that we can schedule our adapter.
but he s not accepting for this
2. Atleast U need to give access for Data base to enter one more extra field like STATUS CODE so that we will add one number and we keep on Update in the Update table and based on that Update table statement it will poll.
but he s not even accepting for this
3. Finally we prposed that to create another table in the Oracle SYstem as Dulplicate Table which is similar to Standard Orginal table when ever he wants to pick the data please keep that data in this Duplicate TABle so that JDBC adapter will pick the data from thsi TABLE instead of picking the data from that standard table so that it will not effect any standard table data in the table.
but he s not even accepting for this
We have done some R & D:::
1. WE approached even through BPM and via switch conditions is one scenario
   FILE RECEIVE >SWITCH CONDITION> RECEIVE AND SEND or else EXIT
2. Using correlation in anotehr scenario means correlating File adapter and JDBC and based on one dynamica value it will goes to SEND STEP ( RECE IVE --> RECEIVE --> SEND STEPS )
Even though we know this...concept that...we jsut tried::
In BPM we can control the flow in XI 3.0 but we cannot Stop the Polling of JDBC adapter at backend because one the data comes from FILE adapter it will keep on HOLD untill it receives the JDBC from Oracle then based on the condition or Correlation it will goes futher SEND step means after that file adapter is picking file or not ...what ever it may be JDBC will polls at backend and brings that data to BPM"
Hence sugest me How to Stop Polling of JDBC Adapter without Scheduling the adapter or else using STATUS CODE Update statements in JDBC Tables
Regards:
Amar Srinivas Eli

Hi! All,
Finally I decided to do the scenario in two steps:
1: FILE REQ --> JDBC REQ -->JDBC RES --> FILE RECV
2: FILE RECV --> RFC
But I am getting issue while doing first scenario
Desgn :
I have created 2 Synchronous interfaces :
1) FILE 2 JDBC REQ
In this a) out put message is FILE Req
          b) Input msage:; FILE RES
2} JDBC2FILE RECV
        a) Output mesage;; JDBC REQ
        b) Input Msge :: JDBC Response
Mappings:
1) File REQ-->JDBC REQ
2) JDBC RES-->FILE RES
Interface mappings:
1: FILE 2 JDBC REQ--> JDBC 2 FLE RECV
CONFIGURATION ::
1: One Seder File CC
2: Two reciever CC's one is for JDBC RECEIVER and other s FILE RECEIVER
3; One Sender Agreement
4: 2 Recver agreements
5: One Interface Determination and
6: One RECCV Determination
My Question;;
1. First let confirm whether my development steps are right or not ?
2: Another thing s I am not sure reg Configuration Steps means
whetehr one interface determination and one Receiver Determinations are required or not as these are synchronous Interfaces
3: main Issue is::::
If my scenario s FILE2RFC2FILE then I will get RFC response automatically but here issue is this is JDBC
My reqquirement is By sending one Field from fILE to JDBC REQ it needs to send entire TAbLE records as a Response to file as XML
without having Sender JDBC how can I send the JDBC Res to FILE and If that is the case then again JDBC adapter is polling which is contradict to the client requuirement which i explained above.
pleas suggest me the Detailed steps mainly Colloboration agreements and logical routings and
also explain in detail if i can go for BPM
Also give cleear blogs but before giving make sure that it contains detailed screen shots because aIready gone thorugh
Scenario File-JDBC-RFC
File<-->JDBC Sync coomunication.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file-rfc-file(Without+BPM)
/people/luis.melgar/blog/2008/05/13/synchronous-soap-to-jdbc--end-to-end-walkthrough
Regards::
Amar Srinivas Eli

Error while retrieving data from sql using jdbc adapter

hi all,
i m working on one scenario where i m sending data using HTTP and receiver is jdbc adapter which is retrieving me data from sql server.
i have checked the structure both for req and res.
i m getting this error
<SAP:Error>
<SAP:Category>Application</SAP:Category>
<SAP:Code>MAPPING.EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_INF57285_DB_HR_RES_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:Stack>During the application mapping com/sap/xi/tf/_INF57285_DB_HR_RES_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
</SAP:Error>
can somebody help me with this.
Thanks & Regards
Aruna

thnks bhavesh i think i made it that way
JDBC REQ
<ns:INF57285_DB_Request xmlns:ns="http://www.infosys.com/xi/training/hyd/57285">
<Employee>
    <EmpDetails action="SELECT">
      <table>EmpDetails</table>
      <access>
        <Name />
        <EmpId />
        <Band />
        <Salary />
      </access>
      <Key>
        <EmpId>57285</EmpId>
      </Key>
    </EmpDetails>
</Employee>
</ns:INF57285_DB_Request>
JDBC RES
<ns:INF57285_DB_Request_response xmlns:ns="http://www.infosys.com/xi/training/hyd/57285">
<Employee_response>
    <row>
      <Name>aruna</Name>
      <EmpId>57285</EmpId>
      <Band>A</Band>
      <Salary>4675776</Salary>
    </row>
</Employee_response>
</ns:INF57285_DB_Request_response>
my hr req is which i mapped with DB req
<ns:INF57285_HR_Req xmlns:ns="http://www.infosys.com/xi/training/hyd/57285">
<REQUEST>
    <EmpNo>57285</EmpNo>
</REQUEST>
</ns:INF57285_HR_Req>
my hr res is which i mapped with DB res
<ns:INF57285_HR_Res xmlns:ns="http://www.infosys.com/xi/training/hyd/57285">
<response>
    <row>
      <Name>aruna</Name>
      <Empld>57285</Empld>
      <Salary>4675776</Salary>
    </row>
</response>
</ns:INF57285_HR_Res>
and interestingly i am not getting any error in sxmb_moni
it's not showing any error
plz suggest me something wht to do ....
thnks & regards
Aruna

How to call Packaged Stored Procedure in JDBC Adapter?

hello frnds,
I m working on a SAP R/3 -> XI -> Oracle scenario. Here on receiver side i m using JDBC Adapter in which i m using a stored procedure.
I have my stored procedure in a Package. Example : package "PKG_SPARES_VOR_UPLOAD" and in that stored procedure "pr_spares_vor_po_hdr_upload".
i have checked that if i write this stored procedure outside the package then it works fine... but if i put it into the package then it is giving me error that ....
" Receiver Adapter v2112 for Party '', Service 'BS_ORADEV':
Configured at 2006-08-16 10:12:14 GMT+05:30
History:
- 2006-08-16 11:02:04 GMT+05:30: Error: TransformException error in xml processor class: Error processing request in sax parser: Error when executing statement for table/stored proc. 'PR_SPARES_VOR_PO_HDR_UPLOAD' (structure 'statement'): java.sql.SQLException: ORA-06550: line 1, column 7:
PLS-00201: identifier 'PR_SPARES_VOR_PO_HDR_UPLOAD' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored ".
please help me out with this problem.
Thankx,
Regards,
Audumbar

Hi,
I have the same problem to call a stored Procedure in a Package.
If my procedure is not in a package, everything is right.
And I musn't indicate all the name, because I musn't put '.' in the name (of the procedure), in my DT on XI.
It would be so nice to have an answer.
Rémi

Table name in Receiver JDBC Adapter

Hi All,
I am using receiver JDBC adapter.
But table name consist of " like BPC."#II" .
After mapping table name becomes BPC."#II" .
I am getting error while pulling data from DB.
Is the table name creating a problem.
Please remedy of this if you have come across such scenario.
Regards
Piyush

Hi Piyush,
All that i could get from the SAP Help regarding JDBC Adapters are these links where i never found anything much regarding the table name.anyways just go through these links and see if you find anything useful.
http://help.sap.com/bp_bpmv130/Documentation/Planning/XIUnicodeGuide030411.pdf
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/b0/676b3c255b1475e10000000a114084/content.htm">Configuring the Receiver JDBC Adapter</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/cf/406642ea59c753e10000000a1550b0/content.htm">Mapping Lookups</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/22/b4d13b633f7748b4d34f3191529946/content.htm">JDBC Adapter</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm">Configuring the Receiver JDBC Adapter - part 2</a>
This is all i got from the help files, anyways you can also go through those links and see if you find anything else useful.
- Escape Symbol for Apostrophe
The apostrophe character () is a reserved character in SQL syntax and is therefore replaced by an escape character if it occurs within value strings. This replacement character can be database-specific. Typical replacement characters are \ or (default value). If a character occurs that is invalid for the database being used, the adapter triggers an error message (an SQL exception) concerning the SQL syntax that is generated by the database.
- Column Name Delimiter
Depending on the database being used, column names can be enclosed by a special delimiter character, for example, if the names can contain special characters (such as ). This character can be specified at this point. The default setting is no delimiter character. If a character occurs that i
Also check if there are notes in the service market place related to the same.
Regards,
abhy
Message was edited by: Abhy Thomas

Sapdb (maxdb) and jdbc adapter problem

Hi,
i have installed this jdbc file:
http://sapdb.org/7.4/sap_db_jdbc.htm
like in this how-to:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how to install and configure external drivers for jdbc and jms adapters.pdf
then i set up an jdbc to file szenario to test the adapter.
Driver is: com.sap.dbtech.jdbc.DriverSapDB
connection is: jdbc:sapdb://sapdb-host/XI_DATA
with sapdb-host is the db server and XI_DATA ist the database
user and pw is dba
sql statement is: SELECT * FROM "AAA_XI_DATA" WHERE "number" = 50
with AAA_XI_DATA is the table with test data.
the statment works in the sapdb studio. (No ; in sapdb and the XI)
but when i have a look at the runtime monitor at the af
messages there is no message genereated. where can i
check, if the jdbc driver is working and where do i find
error messages?
Regards
J.
Message was edited by: Jörg Pieper

You can check if there is some kind of error with the JDBC Adapter in the Runtime Workbench. Inside the RWB, open "Component Monitoring", "tree view", "Adapter Monitoring", and in the adapter listing you'll find the "JDBC Adapter". It should have a green light. If not, the error will be displayed.

SAP XI JDBC Adapter

Similar Messages

Maybe you are looking for