SAPGUI 7.20 / Excel 2010 - Workbook is corrupt and cannot be loaded

Hi all:
SAPGUI 7.20 SP 0
Excel 2010
BW 7.0
Queries run fine in Analyzer. No issues.
However, whenever we try to open a workbook saved in Excel 2007 we get this error "The workbook is corrupt and cannot be loaded".
These workbooks are executed fine from any PC with Excel 2007, same SAPGUI version (7.20 SP 0).
Furthermore, if we open a query and save a workbook (now in Excel 2010) we get the same error "The workbook is corrupt and cannot be loaded".
Basically, we can't open workbooks.
Since the only difference in both scenarios is Excel (same SAPGUI) I checked in some Microsoft forums and read something about incompatibilities in the new Visual Basic coding in Excel 2010 compared to 2007.
Other than that, nothing else so far.
Any ideas or suggestions?
Thanks in advance,
Luis

Repair a corrupted workbook manually
Click the Microsoft Office Button , and then click Open.
In the Open dialog box, select the corrupted workbook that you want to open.
Click the arrow next to the Open button, and then click Open and Repair.
Do one of the following:
To recover as much of the workbook data as possible, click Repair.
To extract values and formulas from the workbook when an attempt to repair the workbook is not successful, click Extract Data.
If this method wasn’t effective in your case, apply Excel Repair Toolbox offered here are highly advanced and have strong built in data recovery algorithm that can produce desired results. By using this user can perform quick and accurate recovery of corrupt .XLS and .XLSX files.
Features of Excel Recovery Software-
Recovers all types of Excel data with full accuracy.
Recovers multiple .XLS and .XLSX files.
Maintains data integrity of the original file after repairing the damaged Excel sheets.
Visit:- http://www.excelrepairtoolbox.com/

Similar Messages

This workbook is corrupt and cannot be loaded

Hello All,
I am on SAP GUI 7.20 (Patch Level 1) -- SAP BW 7.0 (Service Pack 19) -- BEx Analyzer 7.20 (Support Pack 2, Patch 1) -- Microsoft Excel 2010.
1. I tried saving a new query that I had created in BEx Query Designer 7.20 (Support Pack 2, Patch 1) .......... into workbok in BEx Analyzer. So this is an abosultely new query and I opened it in Excel 2010 and then I tried saving it as a workbook.
2. Then I log out off BEx and log back in. Then I go tried opening the new workbook that I had created and I get the error message " The workbook is corrupt and cannot be loaded". I tried saving other queries into workbooks and tried to open them.... but I am getting the same error for all of them.
3. But strangely, already existing workbooks are opening fine.
Is there any logical explanation behind this issue? BTW, I saw Note# 1498919 and its related to my problem. In that note, it talks about problems when moving from Excel 2007 - 2010, but here I am already in 2010.
If anyone has faced this problem or has some suggestions .... please advise.

Patrick,
I found a solution to the problem. Just as you, I'm running "SAP GUI 7.20, Patch Level 7" and "BI Addon SP4, Patch 2 and are using Excel 2010.
You need to go to "Excel options" -> "save" the you have to choose "always save in this format" set it to "97-2003" and now it works. you can create and open your workbooks in Excel 2010. I know is not the best solution but it works and you can always reset your settings after using Excel for Analyzer.
I hope you can use my advise.
Best regards
Anders Jorgensen

Refreshing Excel 2010 workbook with connection to Access database on shared network drive

I have an Excel 2010 workbook that has a connection to an Access database that's on a shared drive on the company network. I can refresh the data in the regular Excel application but when it's hosted in the browser I get this error message "The data
connection uses Windows Authentication and user credentials could not be delegated."
Next, I installed PowerPivot for SQL server 2008 and used PowerPivot to connect to the same Access database. I uploaded it to a PowerPivot gallery but when I try to refresh the data but it says "the workbook was created in an older version of Excel
and PowerPivot and cannot be refreshed until the file is upgraded." I tried to go to "Manage data refresh" but I get the "Sorry, something went wrong" page. Do I need to install PowerPivot for SQL server 2012 to do scheduled data refreshes?
What about manual refreshes?

I have an Excel 2010 workbook that has a connection to an Access database that's on a shared drive on the company network. I can refresh the data in the regular Excel application but when it's hosted in the browser I get this error message "The data
connection uses Windows Authentication and user credentials could not be delegated."
Next, I installed PowerPivot for SQL server 2008 and used PowerPivot to connect to the same Access database. I uploaded it to a PowerPivot gallery but when I try to refresh the data but it says "the workbook was created in an older version of Excel
and PowerPivot and cannot be refreshed until the file is upgraded." I tried to go to "Manage data refresh" but I get the "Sorry, something went wrong" page. Do I need to install PowerPivot for SQL server 2012 to do scheduled data refreshes?
What about manual refreshes?

Cannot open an Excel 2010 workbook by using Internet Explorer 8.0 in sharepoint 2010

When am trying to open a Microsoft Office Excel 2010 workbook from a Web site by browsing to the location with Microsoft Internet Explorer 8.0, you cannot open the file. Instead, you receive the following messages:
Some files can harm your computer. If the file information below looks suspicious, or you do not fully trust the source, do not open this file.
Would you like to open the file or save it to your computer?
If you click Open, you receive the following error message:
Could not open 'http[s]://<var>Server_name</var>/<var>File_path</var>/<var>File_name</var>.xls'.
After you click OK, you receive the following error message:
Microsoft Excel cannot access the file 'http[s]://<var>Server_name</var>/<var>File_path</var>/<var>File_name</var>.xls' There are several possible reasons:
The file name or path name does not exist.
The file you're trying to open is being used by another program. Close the document in the other program, and try again.
The name of the workbook you're trying to save is the same as the name of another document that is read-only. Try saving the workbook with a different name.
Ramesh

Hi Ramesh,
Please install the hotfix package and test the issue again:
http://support.microsoft.com/kb/2817576/en-us
In addition, try uncheck the option “confirm open after download” per:
http://jritmeijer.wordpress.com/2006/08/20/some-files-can-harm-your-computer-if-the-file-information-looks-suspicious-or-you-do-not-fully-trust-the-source-do-not-open-the-file/
Regards,
Rebecca Tu
TechNet Community Support

How can I recover a previously saved Excel 2010 workbook

How can I recover a previously saved Excel 2010 workbook? The I mistakenly deleted a worksheet from the version I am now using and saved that version and would like to recover the older version with the worksheet I deleted. Thanks for any help

Hi,
Just checking in to see if the suggestion of Don's was helpful.
Please let us know if you would like further assistance.
Jaynet Zhang
TechNet Community Support

Outlook 2010 error - The file is corrupt and cannot be opened

Hi experts
Im getting the error - "The file is corrupt and cannot be opened", when opening office attachments in outlook 2010.
I’ve tried disabling the protected view options in office which hasn’t fixed the issue, the only suggestion I have seen which I’m sure would work is to delete
the user profile and recreate. This seems a bit over kill to me, does anyone know what files I need to remove to fix the issue.
Thanks

Hi,
You can try using the Fix it tool in the following KB article to fix the issue:
http://support.microsoft.com/en-us/kb/2387587
Hope this helps.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Protected View Error "The file is corrupt and cannot be opened"

All
I have a problem with Protected View in Office 2010 on Windows 7.
Symptom: When downloading a file from the Internet, the file will not open if launched directly from the source location, or saved locally and then opened. This
is impacting both Word and Excel. I haven’t tested other applications. The user gets the error "The file is corrupt and cannot be opened.".
Expected behaviour: Documents should open in Protected View because they are coming from an untrusted zone (Internet Zone).
Troubleshooting Results:
-      If I turn off Protected View the error goes away and the documents open without
issue (but not in Protected View obviously)
-      If I save the file locally, then copy it to a network drive, the problem goes away (because the zone information is changed?).
-      If I save the file directly to a network location, then open it, the problem does not impact me (also doesn’t open in Protected View)
-      If I repair Office the problem is NOT fixed
-      If I reinstall Office the problem is NOT fixed
The problem doesn't impact all machines, but any new machine I build suffers the problem. All Protected View options are set by group policy and all machines are getting the correct settings.
-       The setting “Enable Protected View for files originating from the Internet” is enabled
-       The setting “Enable Protected View for files located in potentially unsafe locations” is enabled
-      The setting “Enable Protected View for Outlook attachments” is enabled
-      Enable Data Execution Prevention mode is enabled
Has anyone seen this problem or can anyone offer suggestions of where to start looking for the root cause? There are lots of postings on this around the various Internet forums, but most
just suggest turning off Protected View, that is not a valid solution to my mind, Protected View is there for a very sound reason and it is not something I'm willing to turn off, especially when it is working on some machines as expected.
Thanks.
James.

Thanks for coming back, James, and I'm glad you've found the source of your
problem.
As an aside, I had no idea HP made software like that and will take a look
at it - or would if I could. Personally, although I love their hardware, I
wouldn't touch HP software, and the fact that their web page doesn't load
(in IE8) just reinforces my feeling.
Enjoy,
Tony
www.WordArticles.com
"jsc.19" wrote in message news:f9aaa05d-ad62-4f0e-96e1-6bbeb4c7098d...
> Will, thanks for taking the time to post some suggestions. I understand
> Protected View perfectly well and my post is because Protected View is not
> behaving as it should. I think my dot points above show this, still,
> thanks for taking the time to post. I think Tony is more on track with
> his questions around what has changed in my build, and this is the area
> I've focused on over the few days since posting.
>
> I've pulled my build apart and put it back together and found the issue.
> This was tedious to say the least, but turned out worthwhile. A program
> we used called Trim Context Desktop
> (http://h71028.www7.hp.com/enterprise/w1/en/software/information-management-trim.html)
> is part of our SOE. This is a records management tool, but we only use a
> small feature set, and all the Office integration options that can be
> configured during install are turned off, but it turns out that the
> application still impacts Office. If I uninstall the Trim client from our
> SOE, Office Protected View starts working as expected. We knew the full
> Trim suite wasn't ready for Office 2010, but assumed, wrongly, that since
> we didn't use the Office integration features we were OK. All our testing
> was around the application and it works fine, I just didn't connect it to
> the Office issues until systematically eliminating changes from the SOE
> build. Keep a log of your changes!!! It helped me reverse things until I
> found the problem.
>
> Uninstalling Trim also fixes and issue I had in Outlook where the
> previewers wouldn't display Office documents, reporting that the
> previewers were not installed.
>
> We will go to HP to get some support and advice around this before putting
> Trim back in to the SOE.
>
> Anyone - if you have similar problems, can I suggest you look at all your
> Office add-ins and also any applications that may potentially hook in to
> Office.
>
> Cheers all.
>
> James.
>
>
>
Enjoy,
Tony
www.WordArticles.com

Error 1335 the cabinet file data4.cab is corrupt and cannot be used, what do i have to do

error 1335 teh cabinet file data4.cab is corrupt and cannot be used, what do i have to do

Hi Max210662,
Please follow the mentioned kb: http://helpx.adobe.com/creative-suite/kb/install-error-1311-1335-or.html .
Regards,
Romit Sinha

ERROR: The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used

As the title indicates, I'm having this error during installation. It occurs when I try to install
the "Management Studio" part of the program. I've tried a bunch of things like
copying to hard drive and installing, but to no avail. To isolate the problem, i've even tried removing Reporting services, since at the time of failure it seems to be trying to install/configure the Microsoft.Reporting Services dll.
Additionally, I have SQL Express installed (installed it separately, not as part of the SQL 2005 DVD), VS 2005, .NET Framework 2.0, SQL Management Studio Express CTP. Could the Management Studio Express be causing a problem?
Please note:
Although the error is about missing / corrupt Sql.cab, I have searched the entire dvd for the said file, but there is no file called Sql.cab on the dvd. Am I missing something?
Any solution would be greatly appreciated.
TIA

I was installing SQLServer2014_Developer which I had just purchased as a 64bit iso download to VirtualBox Windows_10_64bit Instance that i had just created.
I got the following error about 90% through the SQLServer2014_Developer install:
>>> ===================================================================
>>> SQL Server 2014
>>> ===================================================================
>>> TITLE: Microsoft SQL Server 2014 Setup
>>> ------------------------------
>>> The following error has occurred:
>>> The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used.
>>> This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.
>>> For help, click:
>>> h t t p ://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xDF039760%25401201%25401
>>> ------------------------------
A quick rerun of failed SQLServer2014_Developer install just for the Management_Tools and review of the SQLServer2014_Developer install logs
confirmed error still prelevant:
C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\...
>>> ...
>>> Detailed results:
>>>   Feature:                       Management Tools - Complete
>>>   Status:                        Failed: see logs for details
>>>   Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
>>>   Next Step:                     Use the following information to resolve the error, and then try the setup process again.
>>>   Component name:                SQL Server Management Services
>>>   Component error code:          1335
>>>   Component log file:            C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150206_223659\sql_ssms_Cpu64_1.log
>>>   Error description:             The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading
from the CD-ROM, or a problem with this package.
>>>   Error help link:               h t t p ://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=sql_ssms.msi%40InstallFiles%401335
>>>
>>>   Feature:                       Management Tools - Basic
>>>   Status:                        Failed: see logs for details
>>>   Reason for failure:            An error occurred during the setup process of the feature.
>>>   Next Step:                     Use the following information to resolve the error, and then try the setup process again.
>>>   Component name:                SQL Server Management Services
>>>   Component error code:          1335
>>>   Component log file:            C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150206_223659\sql_ssms_Cpu64_1.log
>>>   Error description:             The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading
from the CD-ROM, or a problem with this package.
>>>   Error help link:               h t t p ://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=sql_ssms.msi%40InstallFiles%401335
>>> ...
Reading though the many Google hits going way back AD-2000/AD-2006/AD-2011/AD-2014 for various installs including SQLserver_2008/2012 etc
I noted that in the main there were x2 common themes.
1. Problem with corruption the original download.
--- Although I had not run the download checksum
--- I had previously just installed SQLServer2014_Developer successfully, so at the minute, I was confident downloads were ok.
--- Many hits mentioned this 'Sql.cab' file and 90% of the install had been successfull -
--- I figured the chances of us all having corruption of this one files were agaianst the odds and
---   probably re-downloading it would not fix this - but I kicked a re-download off anyhow .
While it was running ...
2. Network issue when installing - some of the hits asked if could be related to Virtual drives.
--- This struck a chord
--- I had downloaded the SQLServer2014 .iso to my host PC and then copied it onto one OneDrive so I could access it within the VirtualBox_Windows_10.
--- From within the VirtualBox_Windows_10 I had then used SetupVirtualCloneDrive5450.exe to mount the OneDrive SQLServer2014 .iso and then autorun the install.
What worked for me ...
--- I decided to
--- 1. Copy the same SQLServer2014 .iso that had failed to install x2 from OneDrive to the c:\ root of the VirtualBox_Windows_10.
--- 2. Remount the same SQLServer2014 .iso from c:\ again using SetupVirtualCloneDrive5450.exe.
--- 3. Re-run the SQLServer2014 install using the repair mode.
This time the [Maintenance] [Repair] install completed with all elements showing installed successfully.
Hope this helps
Andy

Error: the cabinet file required for this installation is corrupt and cannot be used.

Hi, ive recently just built a brand new computer and purchased windows 7 64 bit. the system runs fine except for the fact that i cannot install any games (these include command and conquer 4, red alert 3 and sims 3. i go to install and partway through it stops with a message saying:
"the cabinet file 'name.cab' required for this installation is corrupt and cannot be used. this could indicate a network error, an error reading from the CD ROM, or a problem with this package."
At first i suspectd a faulty cd rom drive, but the same thing happend wen i tried it with another drive. i know the disks are fine because theyr new. iv searced online and tried things such as disabling the antivirus, going into command prompt and deleting the .....\SQMClient\DisabledSessions as administrator and anything else that was recommended, but it still cant seem to like cabinet files (btw when the installation stops it doesnt always stop on the same .cab as a previous attempt, sometimes it gets further through the installation than others). they install fine on other computes with windows 7 64bit.
Any help is appreciated! Thanx

Hi Dazattack, I suggest you check the following KB article first:
Error message during Office 2000 or Office XP installation: "Error 1335 - Cannot Copy Cab File Office1.cab"
http://support.microsoft.com/kb/314810
Note: Though it's for Office, some steps in the article can still be used in such scenario.
Meanwhile, can you install other applications that downloaded from the Internet ?
Sean Zhu - MSFT

I can't open the file in word because it is corrupt and cannot be opened, what can i do?

I can't open the file in word because it is corrupt and cannot be opened, what can i do?

I had a Word .doc that became corrupted while SpellChecking an entire vintage book that had been OCRed. Crashed every time I opened it in Word. I was able to open, strip off the Word Header & Footer (invisible), spell check and save as a plain text file with TextWrangler - BBEdit's Baby Brother > http://www.barebones.com/products/textwrangler/ - no Word-ish formatting, but the data was there in total.
ÇÇÇ

Firefox says "prefs.js is corrupt and cannot be accesed."

When I open firefox, I get an error code saying something along the lines of: "C:/Documents and Settings/User/Application Data/mozilla/firefox/profiles/rg7q7llq.default/prefs.js is corrupt and cannot be accesed. Run Chkdsk to fix this."
Well, I've ran Chkdsk twice and it didn't work. Please help. Firefox keeps acting like it's my first time using it and won't install any themes I add.
This happened right after I did a virus scan with Kaspersky Internet Security

Did chkdsk report any problem with that file or any other files?
Can you delete that corrupted file prefs.js?
Help > Troubleshooting Information > Profile Directory > Open Containing folder

My iphone id changed to an unused old email, the good email is corrupted and cannot sign on. How can I reset the good id?

My iphone id changed to an unused old email, the good email is corrupted and cannot sign on. How can I reset the good id?

Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a valid rescue email address, then use this procedure:
         Rescue email address and how to reset Apple ID security questions.
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
     4. Account security issues almost always require you to speak directly to an
         Apple representative to securely establish your identity as the account holder.
         You can set it up so that Apple calls you, either immediately or at a time
         convenient to you.
            1. Go to www.apple.com/support.
            2. Choose Contact Support and click Contact Us.
            3. Choose Other Apple ID Topics and choose the appropriate topic for
                your issue.
            4. Follow the onscreen instructions.
         Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                        Apple ID- All about Apple ID security questions.

I have successfully downloaded lion, and after I click restart, the message " you hard disc is corrupted and cannot be repaired. Please restart" keeps looping. Help !

I have successfully downloaded lion, and after I click restart, the message " you hard disc is corrupted and cannot be repaired. Please restart" keeps looping. Help !

First try restarting your Mac into "safe mode", which will run the equivalent of a Disk Utility "repair disk" operation. If your Mac shuts down during that process, you'll have to try something a little more powerful (and more expensive), such as DiskWarrior.

Deploying manually CC PKG file built with CC Packager. Not using any third party deployment tool. However after each 5 installations, the PKG files corrupt and cannot be use for a 6th installation. I have to build a new PKG file using CC packager. Why ?

Deploying manually CC PKG file built with CC Packager. Not using any third party deployment tool. However after each 5 installations, the PKG files corrupt and cannot be use for a 6th installation. I have to build a new PKG file using CC packager. Why ?

http://helpx.adobe.com/creative-cloud/packager.html
http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

SAPGUI 7.20 / Excel 2010 - Workbook is corrupt and cannot be loaded

Similar Messages

Maybe you are looking for